IRIDEX CORP - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended January 2, 2021

or

For the transition period from                      to                     .

Commission File Number 0-27598

IRIDEX CORPORATION

(Exact name of Registrant as specified in its charter)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None.

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act of 1933.    Yes  ☐    No  ☑

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act of 1934 (the “Exchange Act”).    Yes  ☐    No  ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☑    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☑    No  ☐

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definition of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.      ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.      ☐

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No   ☑

The aggregate market value of the voting common equity held by non-affiliates of the Registrant was approximately $16,966,496 as of June 26, 2020, the last business day of the Registrant’s most recently completed second fiscal quarter, based on the closing price reported for such date on the Nasdaq Global Market. The registrant did not have any non-voting common equity outstanding. For purposes of this disclosure, shares of common stock held by each executive officer and director and by each holder of 5% or more of the outstanding shares of common stock have been excluded from this calculation, because such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of March 15, 2021, Registrant had 15,521,058 shares of common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Certain parts of the Proxy Statement for the Registrant’s 2021 Annual Meeting of Stockholders (the “Proxy Statement”) are incorporated by reference into Part III of this Annual Report on Form 10-K.

NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, which statements involve substantial risks and uncertainties. Forward-looking statements generally relate to future events or our future financial or operating performance. In some cases, you can identify forward-looking statements because they contain words such as “may,” “will,” “should,” “expects,” “plans,” “anticipates,” “could,” “intends,” “target,” “projects,” “contemplates,” “believes,” “estimates,” “predicts,” “potential,” or “continue” or the negative of these words or other similar terms or expressions that concern our expectations, strategy, plans, or intentions. Forward-looking statements contained in this Annual Report on Form 10-K include, but are not limited to, statements about:

In addition, statements that “we believe” and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based upon information available to us as of the date of this Annual Report on Form 10-K, and while we believe such information forms a reasonable basis for such statements, such information may be limited or incomplete, and our statements should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all potentially available relevant information. These statements are inherently uncertain and investors are cautioned not to unduly rely upon these statements.

2

You should not rely upon forward-looking statements as predictions of future events. We have based the forward-looking statements contained in this Annual Report on Form 10-K primarily on our current expectations and projections about future events and trends that we believe may affect our business, financial condition, results of operations, and prospects. The outcome of the events described in these forward-looking statements is subject to risks, uncertainties, and other factors described in the section titled “Risk Factors” and elsewhere in this Annual Report on Form 10-K. Moreover, we operate in a very competitive and rapidly changing environment. New risks and uncertainties emerge from time to time, and it is not possible for us to predict all risks and uncertainties that could have an impact on the forward-looking statements contained in this Annual Report on Form 10-K. We cannot assure you that the results, events, and circumstances reflected in the forward-looking statements will be achieved or occur, and actual results, events, or circumstances could differ materially from those described in the forward-looking statements.

The forward-looking statements made in this Annual Report on Form 10-K relate only to events as of the date on which such statements are made. We undertake no obligation to update any forward-looking statements made in this Annual Report on Form 10-K to reflect events or circumstances after the date of this Annual Report on Form 10-K or to conform such statements to actual results or revised expectations, except as required by law. We may not actually achieve the plans, intentions, or expectations disclosed in our forward-looking statements, and you should not place undue reliance on our forward-looking statements. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures, or investments we may make.

As used in this Annual Report on Form 10-K, the terms “Company,” “IRIDEX,” “we,” “us” and “our” refer to IRIDEX Corporation, and its consolidated subsidiaries.

3

Table of Contents

4

PART I

Item 1. Business

Overview

IRIDEX Corporation is an ophthalmic medical technology company focused on the development and commercialization of breakthrough products and procedures used to treat sight-threatening eye conditions, including glaucoma and retinal diseases. Certain of our laser products are powered by our proprietary MicroPulse^® technology, which is a method of delivering laser energy using a mode which chops the continuous wave laser beam into short, microsecond-long laser pulses. Our products consist of laser consoles, delivery devices and consumable instrumentation, including laser probes.

Our laser consoles consist of the following product lines:

Our business generates recurring revenues through sales of consumable products, predominantly single-use laser probe devices and other instrumentation, as well as repair, servicing and extended service contracts for our laser systems. Our laser probes consist of the following product lines:

Ophthalmologists typically use our laser systems in hospital operating rooms (“ORs”) and ambulatory surgical centers (“ASCs”), as well as their offices and clinics. In ORs and ASCs, ophthalmologists use our laser systems with either an indirect laser ophthalmoscope or a consumable, single use MicroPulse P3 probe, G-Probe^, G-Probe Illuminate or EndoProbe.

In 2020 and 2019, our products were sold in the United States and Germany predominantly through a direct sales force and internationally (aside from Germany) primarily through independent distributors. Total revenues in 2020 and 2019 were $36.3 million and $43.4 million, respectively. We generated net losses of $6.3 million and $8.8 million in 2020 and 2019, respectively.

IRIDEX Corporation was incorporated in California in February 1989 as IRIS Medical Instruments, Inc. In January 1996, we changed our name to IRIDEX Corporation and reincorporated in Delaware. Our executive offices are located at 1212 Terra Bella Avenue, Mountain View, California 94043-1824, and our telephone number is (650) 940-4700. We can also be reached at our website at www.IRIDEX.com, however, the information on, or that can be accessed through, our website is not part of this report.

Impact of COVID-19 to our Business

The COVID-19 pandemic continues to create significant uncertainty in global markets, which has disrupted and harmed, and may continue to disrupt and harm, the Company's business, financial condition, and results of operations. Beginning in the middle of March 2020, the pandemic and responses thereto contributed to a decrease in the demand for our products, primarily due to most hospitals ceasing elective surgical procedures. This impact continued through the fourth quarter of 2020. The extent of the impact of COVID-19 on the Company's operational and financial performance will depend on certain developments, including but not limited to the duration and spread of the outbreak, duration of local, state and federal issued public health orders, impact on our customers and our sales cycles, impact on our employees and impact on regional and worldwide economies and markets in general, all of which are uncertain and cannot be predicted.

5

For more information on risks associated with the COVID-19 pandemic, see the section titled “Risk Factors” in Item 1A of Part I. For more information on the impact of COVID-19 on our business, see the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operation” in Item 7 of Part II.

Our Market Opportunity

Ophthalmology is a large and growing global market that is driven by the aging world population and the onset of chronic diseases.  We currently target the glaucoma and retina disease markets.

Glaucoma

Glaucoma is a leading cause of blindness in the world. Glaucoma is a progressive, chronic disease and vision loss resulting from glaucoma currently cannot be regained. According to Market Scope’s 2020 Laser Market Report, an estimated 101.6 million people worldwide suffer from glaucoma and an additional 42.2 million people suffer from ocular hypertension, for a total of almost 143.8 million candidates for glaucoma treatment. Market Scope expects this to grow at a compounded rate of 2.6 percent through 2025. Glaucoma is most commonly associated with elevated levels of pressure within the eye, or intraocular pressure (“IOP”). Elevated IOP often occurs when aqueous humor, the thin watery fluid that fills the front of the eye, is not circulating normally and draining properly.  Currently, reducing IOP is the only proven treatment for glaucoma with treatments primarily focused on improving the flow of aqueous humor through the eye’s trabecular meshwork and uveoscleral outflow pathways. Global sales of products used to diagnose and treat glaucoma were expected to total $5.8 billion in 2018, according to Market Scope’s 2018 Global Glaucoma Surgical Device Report.  

Pharmaceutical products represent a majority of this revenue estimate but have significant shortcomings.  Pharmaceuticals are typically the first treatment method prescribed for glaucoma. These pharmaceutical treatments are commonly self-administered in drop form by the patients. Patients often have difficulties applying the pharmaceutical drops properly and may fail to appropriately or timely apply the medication, which may significantly reduce the effectiveness of the eye drops. This poor adherence to and lack of persistence with glaucoma medication regimens have been documented in numerous independent studies, which often place the incidence of patient noncompliance up to or above 50%, particularly in patients on two or more prescription eye drops. Even when administered correctly, pharmaceuticals have demonstrated reduced efficacy over time.

When pharmaceuticals lose their effectiveness, appropriate treatment options are determined based on the progression and severity of the disease and include traditional laser therapy (e.g. selective laser trabeculoplasty (“SLT”), minimally invasive stents/shunts (e.g. MIGS), and open surgery (e.g. trabeculectomy)). These treatment alternatives also have significant shortcomings due to treatment effects that dissipate over time, repeat procedures that are less effective or not clinically advised, limited indications of use, and significant complication risks.

We believe that because of the limitations of these traditional treatment alternatives, a clear unmet medical need exists in the management of glaucoma patients.

Medical Retina

Per Market Scope estimates in 2016, global sales of retinal surgical products will increase to $2.7 billion in 2021. Our medical retina business focuses on the treatment of diabetic macular edema (“DME”) which is part of a broader disease state called diabetic retinopathy. Diabetic retinopathy is a common complication of diabetes which impairs vision over time and, if left untreated, can lead to blindness. An estimated 463 million people worldwide had diabetes in 2019, according to the International Diabetes Federation. The federation predicts that there will be 578 million people with diabetes by 2030, and as many as 700 million will have diabetes globally by 2045.  Previous clinical publications, such as an article cited at the U.S. National Institutes of Health’s National Library of Medicine, indicated 28.5% of diabetic patients can develop some form of diabetic retinopathy. Traditional laser photocoagulation and a regimen of injected pharmaceuticals are currently the standard treatment for this disease and are associated with significant shortcomings.  Traditional laser photocoagulation can stabilize the patient’s vision over the long term but presents a risk of varying degrees of vision loss to the patient.  Pharmaceuticals can stabilize vision in the near term but require repeated injections.  The injections are painful and the patients may experience side effects including increased risk of eye infections.  Furthermore, a regimen of repeated pharmaceutical injections is very demanding to the physician and patient in terms of time and to the healthcare system at large with regard to dollars spent on treatment.

The shortcomings in treating retinal diseases have led to a renewed interest in alternative approaches that may provide better or comparable patient outcomes at lower costs.

6

Our Solution

Our traditional laser technology was developed to perform laser photocoagulation by using a mode that delivers continuously-on laser light, which is referred to as continuous wave (“CW”) mode.  Laser photocoagulation generates a local healing response and has been demonstrated to be a safe and effective therapy with long-term benefits for certain ophthalmic procedures.  However, use of the CW mode typically leads to local tissue damage and can cause loss of visual function, which limits the applications of the technology.

We developed our proprietary MicroPulse technology with the goal of harnessing the clinical benefits of CW mode while minimizing the associated tissue damage.  MicroPulse is a method of delivering laser energy using a mode which chops the CW beam into short, microsecond long laser pulses. The laser pulses are intended to generate the desired therapeutic response while the time in between laser pulses is believed to enable the tissue to cool and thereby minimize tissue damage.  This is analogous to holding one’s hand continuously over a candle versus waving it back and forth.  When held continuously, the candle would cause burning and scar tissue.  However, when exposed intermittently the candle only heats the tissue without burning.  

There is a growing body of clinical evidence that has been published over the past 10 years that demonstrates that MicroPulse therapy is clinically effective with limited tissue damage for the treatment of glaucoma and retinal diseases.  Currently, we have developed three applications of our MicroPulse technology for the treatment of eye diseases:

7

Our Strategy

We are a worldwide leader in developing, manufacturing, marketing, selling and servicing innovative medical laser systems and associated instrumentation for the treatment of sight-threatening eye diseases.  Our strategy is to leverage our existing brand and distribution channel in the ophthalmology market to promote the adoption of MicroPulse as a viable treatment alternative for glaucoma and retinal diseases and consequently to commercialize a broad array of products that:

To achieve these goals, we are pursuing a number of organic initiatives that we anticipate will be supplemented from time to time by acquisitions, such as the asset acquisition recently completed with one of the subsidiaries for Topcon Corporation. We anticipate that the successful execution of this strategy will lead to profitable growth and enhanced shareholder value.

Our Products

Our current product portfolio utilizes a system approach. Each system includes a laser console, which generates the laser energy, and a number of interchangeable delivery devices or disposable probes for use in specific clinical applications. This approach allows our customers to purchase a basic laser system and add additional delivery devices or disposable probes as their therapeutic needs expand or as new applications develop. We currently offer three basic product categories: 1) laser consoles, 2) delivery devices which are optical-mechanical products that mount to ophthalmologists’ diagnostic equipment and transmit the laser and 3) single-use disposable probes that transmit the laser light to a targeted region inside the eye.

Laser Consoles

Our laser consoles, which are identified below, incorporate the economic and technical benefits of solid state and semiconductor laser technology.

Glaucoma: Cyclo G6 Laser System. The Cyclo G6^® is an infrared (810nm) laser designed to treat patients diagnosed with a range of glaucoma disease states. The Cyclo G6 system is sold with a family of probes that are disposable, including our patented MicroPulse P3 Probe that utilizes our MicroPulse technology, our G-Probe and our G-Probe Illuminate.

Medical retina: IQ laser systems. Our IQ laser systems offer our MicroPulse technology but also have CW capabilities. Our IQ 577^® delivers visible yellow (577nm) laser light and our IQ 532^® delivers visible green (532nm) laser light. Our IQ laser systems are typically used with our TxCell^® Scanning Laser Delivery System and our Slit Lamp Adapters when used to treat DME with MicroPulse.  

Surgical retina: OcuLight laser systems. Our OcuLight^® TX, OcuLight GL, and OcuLight GLx lasers deliver visible green (532nm) laser light. Our OcuLight SL and OcuLight SLx lasers deliver infrared (810 nm) laser light.  

Delivery Devices

The following delivery devices are typically used with our IQ and OcuLight laser systems:

TxCell Scanning Laser Delivery System (“TxCell”). TxCell^® allows the physician to perform multi-spot pattern scanning for efficient delivery of our MicroPulse laser.

Slit Lamp Adapter (“SLA”). These adapters allow the physician to utilize a standard slit lamp in both diagnosis and treatment procedures. Physicians can install an SLA in a few minutes and convert standard diagnostic slit lamps into a therapeutic laser delivery system. SLAs are used in treatment procedures for both retinal diseases and glaucoma.

Laser Indirect Ophthalmoscope (“LIO”). The indirect ophthalmoscope is designed to be worn on the physician’s head and to be used in procedures to treat peripheral retinal disorders, particularly in infants or adults requiring treatment in the supine position. This product can be used in both diagnosis and treatment procedures at the point-of-care.

Single-use disposable probes

MicroPulse P3 Probe. The MicroPulse P3^® Probe is used with our Cyclo G6 laser system to perform MicroPulse TLT. The MicroPulse P3 Probe is used on an anesthetized eye in the doctor’s office or in the OR. The non-incisional procedure takes just a few minutes and results in minimal post-operative recovery for the patient. MicroPulse TLT may be used to treat a wide variety of glaucoma types, including open-angle and closed-angle glaucoma, and a broad range of disease severity.

8

Since the launch of the MicroPuls P3 Probe, we have worked with physicians to optimize treatment techniques and clinical outcomes. During our collaborations, we learned that minor ergonomic probe modifications could facilitate easier use and result in more consistent clinical outcomes. In the fourth quarter of fiscal year 2019, we released a revised MicroPulse P3 Probe that reflects these modifications. Initial feedback from approximately 150 physicians has been very positive in terms of better viewing of the treatment area, ease of treating small eyes and deep-set eyes, more intuitive probe orientation and placement, better stabilization of the probe on the eye, and improved light coupling to the tissue. In addition, physicians have continued to observe excellent safety profiles and good preliminary clinical results.

G-Probe. The G-Probe^® is used in procedures to treat uncontrolled glaucoma, typically described as “refractory glaucoma”.  The G-Probe delivers CW laser to the ciliary body and is believed to stop the production of aqueous humor, thus reducing IOP.  The G-Probe’s non-invasive procedure takes approximately ten minutes and is performed on an anesthetized eye in the doctor’s office or OR.  The G-Probe is a sterile disposable product.  

G-Probe Illuminate. The G-Probe Illuminate^® is also used in procedures to treat refractory glaucoma. The proprietary illumination feature allows for more targeted treatment and may offer additional clinical benefits.  The G-Probe Illuminate is a sterile disposable product.

EndoProbe. Our EndoProbe^® family of products are used for endophotocoagulation, a retinal treatment procedure performed in the hospital OR or surgery center during a vitrectomy procedure.  Vitrectomy procedures are performed to treat proliferative diabetic retinopathy, macular holes, retinal tears and detachments. These disposable probes are available in tapered, angled, stepped, aspirating, illuminating, and adjustable styles, as well as a wide variety of sizes. The EndoProbe is a sterile disposable product.

Research and Development

We have close working relationships with researchers, clinicians and practicing physicians around the world who provide new ideas, evaluate prototypes and assist us in validating new products and new applications before they are introduced.

Our internal research and development (“R&D”) activities are performed by a current team of eight engineers and regulatory professionals with experience in various aspects of medical products, laser systems, delivery devices, clinical techniques, and regulatory affairs with a focus on introducing innovative products which satisfy the unmet and emerging needs of our customers. The core competencies of the team include: mechanical engineering, electrical engineering, optics, lasers, fiber optics, software, and industrial designs. The R&D process integrates all necessary disciplines of the Company from product inception through customer acceptance. This process facilitates reliable new product innovations and a consistent pipeline of innovative products for our customers.

Our research activities are managed internally by our R&D staff. We supplement our internal R&D staff by hiring consultants or partnering with physicians known for their expertise. Research efforts are directed toward the development of new products, as well as the identification of markets not currently addressed by our products.

We believe that it is important to make a substantial contribution to improving clinical outcomes. For instance, we have made substantial investments in improving the treatment of serious eye diseases such as glaucoma and retinal disease. The objectives of developing new treatments and applications are to expand the patient population, to better and more economically treat diseases, to treat patients earlier in the treatment regimen and to reduce the side effects of treatment.

We consider clinical projects to be a component of our R&D efforts and they may or may not result in additional commercial opportunities.

Customers and Customer Support

Our products are currently sold for use by ophthalmologists specializing in the treatment of eye disease in retina, glaucoma and pediatric eye diseases. Other customers include research and teaching hospitals, government installations, surgical centers, hospitals, veterinary practices, and office clinics (outpatient).

We seek to provide superior customer support and service and believe that our customer service and technical support distinguish our product offerings from those of our competitors. We provide depot service at our Mountain View facility for our products. Our customer support representatives assist customers with orders, warranty returns and other administrative functions. Our technical support engineers provide customers with answers to technical and product-related questions. We maintain an “around-the-clock” telephone service line to service our customers. If a problem with a depot serviceable product cannot be diagnosed and resolved by telephone, a service loaner is shipped overnight to domestic customers under warranty or service contract, and by the most rapid delivery means available to our international customers, and the problem unit is returned to us. The small size and rugged design of our products allows for economical shipment and quick response to customers worldwide.

9

Sales and Marketing

In 2020 and 2019, we sold and marketed our products in the United States and Germany predominantly through our direct sales force and internationally (aside from Germany) primarily through independent distributors. Currently we have a direct sales force of 16 employees who are engaged in sales efforts within the United States, 1 in Germany and 5 personnel engaged in managing our distribution sales efforts internationally. Our sales are administered through our corporate headquarters in Mountain View, California.

International revenues represented 46.9% and 48.7% of our revenues in 2020 and 2019, respectively. We believe that our international sales will continue to represent a significant portion of our revenues for the foreseeable future. Our international sales are made principally to customers in Europe, Asia, the Pacific Rim, the Middle East, Russia, Africa and Latin America. Our distribution agreements with our international distributors are generally exclusive and typically can be terminated by either party without cause with 90 days’ notice. International sales may be adversely affected by currency fluctuations, the imposition of governmental controls, restrictions on export technology, political instability, trade restrictions, changes in tariffs, tax treaties and the economic condition in each country in which we sell our products.

To support our sales process, we conduct marketing programs which include: our website, clinical education, social media, email marketing, trade shows, public relations, market research, key opinion leader collaborations and advertising in trade and academic journals and newsletters. We typically participate in over 85 trade shows worldwide on an annual basis. These meetings allow us to present our products to existing and prospective buyers.

Through marketing, we collaborate with our customers to identify new products and applications which help meet their needs, and in turn provides us with new product concepts, enhances our ability to identify new applications for our products and validates new procedures using our products. Customers include key opinion leaders who are often the heads of the departments in which they work or professors at universities. We believe that these luminaries in the field of ophthalmology are key to the successful introduction of new products and the subsequent acceptance of these new products by the general market. Acceptance of our products by these early adopters is key to our strategy in the validation and commercialization of our new products.

Clinical Affairs

Our clinical affairs group was established to support clinical research opportunities, provide specialized ophthalmic surgeon training and credentialing for our proprietary MicroPulse products, establish strong relationships with prominent key opinion leaders and assure the accuracy and consistency our messaging to the market. We believe that a strong research program underlying marketing initiatives and professional level training for our customers are key to driving the application of our technology for more widespread and consistent use.

Operations

The manufacture of our visible light and infrared laser consoles and the related delivery devices is a highly complex and precise process. Completed systems must pass quality control and reliability tests before shipment. Our manufacturing activities consist of specifying, sourcing, assembling and testing of components and certain subassemblies for assembly into our final product. Currently we have a total of 11 employees engaged in manufacturing activities for these products.

The medical devices we manufacture are subject to extensive regulation by numerous governmental authorities, including federal, state, and foreign governmental agencies. The principal regulators in the United States are the Food and Drug Administration (“FDA”) and the California Department of Public Health, Food and Drug Branch. In April 1998, we received certification for ISO 9001/EN 46001, which is an international quality system standard that documents compliance to the European Medical Device Directives. In February 2004, we were certified to ISO 13485:2003, which replaced ISO 9001/EN46001 as the international standard for quality systems as applied to medical devices. In December 2018, we were certified to ISO 13485:2016, which superseded the 2003 version of the standard. In August 2008, we received FDA 510(k) clearance on our family of IRIDEX IQ laser systems. This clearance covers the IRIDEX IQ 532 and IQ 577 laser systems and their associated delivery devices to deliver laser energy in either CW or MicroPulse mode. In January 2015, we received FDA 510(k) clearance for Cyclo G6. These laser systems are intended for a wide range of specific applications in the medical specialties of ophthalmology.

International regulatory bodies often establish varying product standards, packaging requirements, labeling requirements, tariff regulations, duties and tax requirements. As a result of our sales in Europe, we are required to have all products “CE” marked, an international symbol affixed to all products demonstrating compliance to the European Medical Device Directives and all applicable standards. In July 1998, we received CE mark certification under Annex II guidelines, the most stringent path to CE certification. With Annex II CE mark certification, we have demonstrated our ability to both understand and comply with all applicable standards under the European Medical Device Directives. Currently, all of our released products are CE marked. Continued certification is based on successful review of the process by our European

10

Registrar during its annual audit. Any loss of certification could have a material adverse effect on our business, results of operations and financial condition. We rely on third parties to manufacture substantially all of the components used in our products, although we assemble critical subassemblies and the final product at our facility in Mountain View, California. Some of these suppliers and manufacturers are sole source. We have some long-term or volume purchase agreements with our suppliers but currently purchase most components on a purchase order basis. These components may not be available in the quantities required, on reasonable terms, or at all. Financial or other difficulties faced by our suppliers or significant changes in demand for these components or materials could limit their availability. Any failures by our third-party suppliers to adequately perform may delay the submission of products for regulatory approval, impair our ability to deliver products on a timely basis or otherwise impair our competitive position.

Competition

Competition in the market for laser systems and delivery devices used for ophthalmic treatment procedures is intense and is expected to increase. This market is also characterized by technological innovation and change. We compete by providing features and services that are valued by our customers such as: enhanced product performance, and clinical outcomes, ease of use, durability, versatility, customer training services and rapid repair of equipment.

Our principal ophthalmic laser competitors are Alcon, Inc., Novartis AG, Bausch Health Companies Inc., Carl Zeiss Meditec AG, Ellex Medical Lasers, Ltd., Lumenis Ltd, Nidek Co. Ltd., Quantel Medical SA, OD-OS GmbH and A.R.C. Laser GmbH.  We also compete with alternative glaucoma surgical device companies such as Alcon, Inc., Allergan, Inc., Glaukos Corporation, New World Medical, Inc. and Ivantis, Inc.  Pharmaceuticals represent alternative treatments to our laser procedures.  Some of our principal pharmaceutical competitors are Alcon, Inc., Allergan, Inc., Astellas Pharma Inc., Pfizer Inc., Regeneron Pharmaceuticals, Inc., Roche Holding Ltd. (Genentech) and Bausch Health Companies Inc. Some of our competitors have substantially greater financial, engineering, product development, manufacturing, marketing and technical resources than we do. Some companies also have greater name recognition than us and long-standing customer relationships. In addition, other medical companies, academic and research institutions, or others, may develop new technologies or therapies, including medical devices, surgical procedures or pharmacological treatments and obtain regulatory approval for products utilizing such techniques that are more effective in treating the conditions targeted by us, or are less expensive than our current or future products. Our technologies and products could be rendered obsolete by such developments. Any such developments could have a material adverse effect on our business, financial condition and results of operations.

Patents and Proprietary Rights

Our success and ability to compete is dependent in part upon our proprietary information. We rely on a combination of patents, trade secrets, copyright and trademark laws, nondisclosure and other contractual agreements and technical measures to protect our intellectual property rights. These are either developed internally or obtained from acquisitions such as RetinaLabs. We file patent applications to protect technology, inventions and improvements that are significant to the development of our business. Our patent portfolio includes 25 active United States patents and 7 active foreign patents on the technologies related to our products and processes. In addition, we have 7 patent applications pending in the United States and 12 foreign patent applications pending. Our patent applications may not be approved.

In addition to patents, we rely on trade secrets and proprietary know-how which we seek to protect, in part, through proprietary information agreements with employees, consultants and other parties. Our proprietary information agreements with our employees and consultants contain provisions requiring such individuals to assign to us, without additional consideration, any inventions conceived or reduced to practice by them while employed or retained by us, subject to customary exceptions. We can provide no assurance that our employees and consultants will abide by the provisions of these agreements and that our confidential information and trade secrets will be protected.

Government Regulation

The medical devices marketed and manufactured by us are subject to extensive regulation by numerous governmental authorities, including federal, state, and foreign governmental agencies. Pursuant to the Federal Food, Drug, and Cosmetic Act (“FD&C Act”), as amended, and the regulations promulgated thereunder, the FDA serves as the principal federal agency within the United States with authority over medical devices and regulates the research, clinical testing, manufacture, labeling, distribution, sale, marketing and promotion of such devices. Noncompliance with applicable requirements can result in, among other things, warning letters, fines, injunctions, civil penalties, recall or seizures of products, total or partial suspension of production, failure of the government to grant pre-market clearance or approval for devices, withdrawal of marketing approvals, and criminal prosecution. The FDA also has the authority to request repair, replacement or refund of the cost of any medical device manufactured or distributed by us.

11

In the United States, medical devices are classified into one of three classes - Class I, II or III. The class to which the device is assigned determines, among other things, the type of pre-marketing submission/application required for FDA clearance to market. If the device is classified as Class I or II, and if it is not exempt, a 510(k) pre-market notification will be required for marketing. Under FDA regulations, Class I devices are subject to general controls (for example, labeling, pre-market notification and adherence to Quality System Regulations (“QSRs”) requirements). Class II devices receive marketing clearance through a 510(k) pre-market notification. For Class III devices, a pre-market approval (“PMA”) application will be required unless the device is a pre-amendments device (on the market prior to the passage of the medical device amendments in 1976, or substantially equivalent to such a device) and PMAs have not been called for. In that case, a 510(k) will be the route to market. A 510(k) clearance will be granted if the submitted information establishes that the proposed device is substantially equivalent to a legally marketed Class I or II medical device, or to a Class III medical device for which the FDA has not called for a PMA. The FDA may determine that a proposed device is not substantially equivalent to a legally marketed device or that additional information or data are needed before a substantial equivalence determination can be made. A request for additional data may require that clinical studies of the device’s safety and efficacy be performed.

In the United States, commercial distribution of a device for which a 510(k) notification is required can begin only after the FDA issues an order finding the device to be substantially equivalent to a previously cleared device. The FDA has recently been requiring a more rigorous demonstration of substantial equivalence than in the past. Even in cases where the FDA grants a 510(k) clearance, it can take the FDA between three and six months from the date of submission to grant a 510(k) clearance, but it may take longer.

A “not substantially equivalent” determination, or a request for additional information, could delay the market introduction of new products that fall into this category and could have a material adverse effect on our business, financial condition and results of operations. For any of our products that are cleared through the 510(k) process, modifications or enhancements that could significantly affect the safety or effectiveness of the device or that constitute a major change to the intended use of the device will require new 510(k) submissions.

We have obtained 510(k) clearances for all of our products marketed within the United States that require 510(k) clearance. We have also modified aspects of our products since receiving regulatory clearance, and we have submitted 510(k)s for those modifications as required by FDA regulations. After a device receives a 510(k) clearance or a PMA, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, will require a new clearance or approval. The FDA requires each manufacturer to make this determination initially, but the FDA can review any such decision and can disagree with a manufacturer’s determination. If the FDA disagrees with our determination not to seek a new 510(k) clearance or PMA, the FDA may retroactively require us to seek 510(k) clearance or pre-market approval. The FDA could also require us to cease marketing and distribution and/or recall the modified device until a 510(k) clearance or a PMA approval is obtained. Also, in these circumstances, we may be subject to significant regulatory fines or penalties.

Any products manufactured or distributed by us pursuant to FDA clearances or approvals are subject to pervasive and continuing regulation by the FDA, including record keeping requirements and reporting of adverse experiences with the use of the device. Device manufacturers are required to register their establishments and list their devices with the FDA and certain state agencies, and are subject to periodic inspections by the FDA and certain state agencies. The FD&C Act requires devices to be manufactured to comply with applicable QSR regulations which impose certain procedural and documentation requirements upon us with respect to design, development, manufacturing and quality assurance activities. We are subject to unannounced inspections by the FDA and the Food and Drug Branch of the California Department of Public Health, to determine our compliance with the QSR and other regulations, and these inspections may include the manufacturing facilities of our subcontractors.

Labeling and promotion activities are subject to scrutiny by the FDA and in certain instances, by the Federal Trade Commission. The FDA actively enforces regulations prohibiting marketing of products for unapproved uses. We and our products are also subject to a variety of state laws and regulations in those states or localities where our products are or will be marketed. Any applicable state or local regulations may hinder our ability to market our products in those states or localities. Manufacturers are also subject to numerous federal, state and local laws relating to such matters as safe working conditions, manufacturing practices, environmental protection, fire hazard control and disposal of hazardous or potentially hazardous substances. We may be required to incur significant costs to comply with such laws and regulations now or in the future. Such laws or regulations may have a material adverse effect upon our ability to do business.

Export of our products is regulated by the FDA and subject to the FD&C Act, 21 U.S.C. §§321-397, and other statutes FDA administers, which greatly expanded the export of approved and unapproved United States medical devices. However, some foreign countries require manufacturers to provide a specific type of FDA export certificate (such as a Certificate to Foreign Government or Certificate of Exportability) which requires the device manufacturer to certify to the FDA that the product has been granted pre-market clearance in the United States and that the manufacturing facilities appeared to be in compliance with QSR at the time of the last QSR inspection. The FDA will refuse to issue any export certificate if significant outstanding QSR violations exist.

12

We are also regulated under the Radiation Control provisions (originally enacted as the Radiation Control for Health and Safety Act of 1968) which are located in Sections 531 through 542 of the FD&C Act, which requires laser products to comply with performance standards, including design and operation requirements, and manufacturers to certify in product labeling and in reports to the FDA that their products comply with all such standards. The law also requires laser manufacturers to file new product and annual reports, maintain manufacturing, testing and sales records and report product defects. Various warning labels must be affixed and certain protective devices installed, depending on the class of the product.

The introduction of our products in foreign markets will also subject us to foreign regulatory clearances which may impose substantial additional costs and burdens. International sales of medical devices are subject to the regulatory requirements of each country. The regulatory review process varies from country to country. Many countries also impose product standards, packaging requirements, labeling requirements and import restrictions on devices. In addition, each country has its own tariff regulations, duties and tax requirements. The approval by the FDA and foreign government authorities is unpredictable and uncertain. The necessary approvals or clearances may not be granted on a timely basis, if at all. Delays in receipt of, or a failure to receive, such approvals or clearances, or the loss of any previously received approvals or clearances, could have a material adverse effect on our business, financial condition and results of operations. There are a number of major regulatory changes occurring in the regulation of medical devices in the European Union. A new revision of the quality system regulation (ISO 13485:2016) has been released that substantially increases the requirements for a medical device quality system. The Medical Device Regulation (“MDR”) will replace the current medical device directives (93/42/EEC), and it substantially changes the way that medical devices are brought to market in the European Union and how they maintain compliance throughout the product’s life cycle. Additionally, the new revision 4 of the clinical evaluation report guidance document (MEDDEV 2.7.1) severely restricts the use of substantial equivalence for new products, resulting in the need for formal clinical trial data for most new products. These changes will increase the cost for compliance and for product development, and they lengthen product introduction cycles. Failure to comply with these changes can have an adverse effect on our ability to release new products in a timely manner.

In order to maintain a Canadian Medical Device License (MDL), which is needed to sell a medical device in Canada, the holder of the MDL (the “regulatory manufacturer”) must obtain an ISO 13485:2016 certificate through the Medical Device Single Audit Program (MDSAP). The MDSAP requirement is new to Canada, and manufacturers that received a MDL prior to adoption of this requirement are required to transition to the MDSAP. To address this Canadian medical device licensing requirement, Iridex transferred its MDLs to Salient Medical Solutions (Salient), Iridex’s distributor in Canada and an entity that is certified under MDSAP. Iridex continues to fabricate the devices as Salient’s contract manufacturer. Salient is now the regulatory manufacturer, and has the licenses necessary to import and sell Iridex’s products into Canada. 

Changes in existing requirements or adoption of new requirements or policies by the FDA or other foreign and domestic regulatory authorities could adversely affect our ability to comply with regulatory requirements. Failure to comply with regulatory requirements could have a material adverse effect on our business, financial condition and results of operations. We may be required to incur significant costs to comply with laws and regulations in the future. These laws or regulations may have a material adverse effect upon our business, financial condition or results of operations.

Reimbursement

The cost of a significant portion of medical care in the United States is funded by government programs, health maintenance organizations and private insurance plans. Our ophthalmology products are typically purchased by doctors, clinics, hospitals and other users, which bill various third-party payers, such as government programs and private insurance plans, for the health care services provided to their patients. Government imposed limits on reimbursement of hospitals and other health care providers have significantly affected the spending budgets of doctors, clinics and hospitals to acquire new equipment, including our products. Under certain government insurance programs, a health care provider is reimbursed for a fixed sum for services rendered in treating a patient, regardless of the actual charge for such treatment. The Center for Medicare and Medicaid Services reimburses hospitals on a prospectively-determined fixed amount basis for the costs associated with an in-patient hospitalization based on the patient’s discharge diagnosis, regardless of the actual costs incurred by the hospital or physician in furnishing the care and regardless of the specific devices used in that procedure.

Private third-party reimbursement plans are also developing increasingly sophisticated methods of controlling health-care costs by imposing limitations on reimbursable procedures and the exploration of more cost-effective methods of delivering health care. In general, these government and private measures have caused health care providers, including our customers, to be more selective in the purchase of medical products. In addition, changes in government regulation or in private third-party payers’ policies may limit or eliminate reimbursement for procedures employing our products, which could have a material adverse effect on our business, results of operations and financial condition.

13

Doctors, clinics, hospitals and other users of our products may not obtain adequate reimbursement for use of our products from third-party payers. While we believe that the laser procedures using our products have generally been reimbursed, payers may deny coverage and reimbursement for our products if they determine that the device was not reasonable and necessary for the purpose used, was investigational or was not cost-effective.

Backlog and Seasonality

We generally do not maintain a material level of backlog. As a result, we do not believe that our backlog at any particular time is indicative of future sales levels. Our quarterly results have been, and are expected to continue to be, affected by seasonal factors. For example, our European sales during the third quarter are generally lower due to many businesses being closed for the summer vacation season.

Human Capital

Our employees are our human capital and they are our greatest strength and most valuable resource. As of January 2, 2021, we had a total of 89 full-time equivalent employees engaged in our ongoing operations, including 37 in operations (including manufacturing, quality, logistics and service), 33 in sales and marketing which does not include four consultants and one independent sales representative, eight in R&D and 11 in finance and administration. We also employ, from time to time, a number of temporary and part-time employees as well as consultants on a contract basis. As of January 2, 2021, we had 39 such persons serving in such roles.

Our human capital resources objectives include identifying, recruiting, retaining, incentivizing and integrating our existing and new employees, advisors and consultants. We continuously invest in our workforce by seeking to create a diverse, inclusive, and safe work environment where our employees can learn, innovate, and deliver their best. We are committed to being inclusive to enable our workforce and customers to succeed.

Our employees are not represented by a collective bargaining organization, and we have never experienced a work stoppage or strike. We consider our employee relations to be good.

Available Information

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to reports pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available, free of charge, through the U.S. Securities and Exchange Commission’s (“SEC”) website. These periodic reports and amendments are also available, free of charge, on our website, as soon as reasonably practicable after such reports are electronically filed with the SEC.

Investors and others should note that we announce material financial information to our investors using SEC filings, press releases, our investor relations website, public conference calls and webcasts. We use these channels as well as social media to communicate with investors, customers and the public about our company, our products and other issues. It is possible that the information we post on social media channels could be deemed to be material information. We encourage investors, our customers, and others interested in IRIDEX to review the information we post on our Facebook page (www.facebook.com/IRIDEX) and Twitter feed (https://twitter.com/IRIDEX). Any information on, or that can be accessed through, our website and social media channels is not part of this report.

14

Item 1A. Risk Factors

Risk Factor Summary

Our business operations are subject to numerous risks, factors and uncertainties outside of our control that could cause our actual results to be harmed, including risks regarding the following:

General economic factors

Operational factors

Regulatory and Legal factors

15

Financing and Transactional Risks

Governance Risks and Risks related to Ownership of our Common Stock

Factors That May Affect Future Results

In addition to the other information contained in this Annual Report Form 10-K, we have identified the following risks and uncertainties that may have a material adverse effect on our business, common stock price, financial condition or results of operations. You should carefully consider the risks described below before making an investment decision.

Risks Relating to our Business

The effects of the COVID-19 pandemic have disrupted, and may continue to significantly disrupt, our operations, including our ability to manufacture and supply products and perform research and development activities, our customers’ usage of our products as demand declines in elective surgeries in response to COVID-19, all of which have had and expected to continue to have a material and adverse effect on our business, future revenues and financial condition. We are unable to predict the extent to which the pandemic and related impacts will continue to adversely impact our business operations, financial performance, results of operations, financial position and the achievement of our strategic objectives.

Our business, results of operation and financial performance have been negatively impacted by the COVID-19 pandemic and related public health responses, such as shelter-in-place orders, social distancing protocols, and travel restrictions in many of the countries and regions in which we have operations or manufacturing partners. Due to these impacts and measures, we have experienced and may continue to experience significant and unpredictable reductions in the demand for our products as healthcare customers divert medical resources and priorities towards the treatment of diseases related to COVID-19. In addition, our customers may delay, cancel or redirect planned capital expenditures in order to focus resources on COVID-19 or in response to economic disruption related to COVID-19. For example, during the fiscal year ended January 2, 2021, we experienced significant decline in treatment and procedure volume worldwide, as healthcare systems diverted resources to meet the increasing demands of managing COVID-19. In addition, the American College of Surgeons, U.S. surgeon general, and medical societies are evaluating the risks of minimally invasive surgeries in the presence of infectious diseases, which we expect will continue to negatively impact the usage of our products and the number of ophthalmic treatments and procedures performed. If these recommendations continue to remain in place and the volume of elective procedures remains low, our results of operations and financial condition will continue to be adversely affected.

As a result of the COVID-19 outbreak around the world, we have adopted several measures including instructing employees to work from home while under shelter-in-place orders, slowing our manufacturing operations, and restricting non-critical business travel by our employees. In April and May of 2020, following shelter-in-place orders, the Company operated with limited personnel at our facilities to continue essential operations. In June 2020, we implemented return-to-work phases in conjunction with a social distancing protocol to safely continue essential operations to best meet customer demands in light of the pandemic. This pandemic has caused disruption and delays in our ability to operate and manufacture, test and assemble products in our internal facilities, particularly in our Mountain View, California facility, and has limited our ability to continue certain research and development activities which could materially and adversely affect our ability to develop new products and technologies on the timelines we previously anticipated.

16

The COVID-19 pandemic has created economic uncertainty and volatility in the financial markets around the world, resulting in an economic downturn that has affected and will likely continue to affect demand for our products and impact our results of operations. As a result, this may lead to a period of regional, national, and global economic slowdown or regional, national, or global recessions that would curtail or delay spending by hospitals and affect demand for our products as well as increase the risk of customer defaults or delays in payments. Our customers may terminate or amend their agreements for the purchase, lease, or service of our products due to bankruptcy, lack of liquidity, lack of funding, operational failures, or other reason. The ultimate impact of the COVID-19 pandemic on our operations and financial performance depends on many factors that are not within our control, including, but not limited, to: the recommendations by medical authorities on whether hospitals should and may perform elective surgical procedures; hospitals abilities and willingness to devote resources to elective surgical procedures; governmental, business and individuals’ actions that have been and continue to be taken in response to the pandemic (including restrictions on travel and transport and workforce pressures); the impact of the pandemic and actions taken in response on global and regional economies, travel, and economic activity; the availability of federal, state, local or non-U.S. funding programs; general economic uncertainty in key global markets and financial market volatility; global economic conditions and levels of economic growth; and the pace of recovery when the COVID-19 pandemic subsides. Although the magnitude of the impact of COVID-19 on our business operations remains uncertain and difficult to predict, and this remains a highly dynamic situation, we have experienced and will continue to experience in subsequent periods, disruptions to our business that will likely continue to adversely impact our business, financial condition and results of operations.

We may not be successful in our strategic partnership with Topcon Corporation and the relationship may divert resources away from existing operations or expose us to liabilities, which could adversely affect our business, results of operations and financial condition.

On March 2, 2021, we entered into a series of strategic transactions with Topcon Corporation (“Topcon”) Topcon America Corporation (the “Investor”) and Topcon Medical Laser Systems, Inc., a subsidiary of Topcon (the “Seller”), which included an asset purchase agreement with the Seller, pursuant to which we acquired substantially all the assets (except for cash and cash equivalents) of the Seller, including rights to the Seller’s PASCAL product (the “Asset Purchase Agreement”), (ii) Topcon and our company entered into a distribution agreement dated March 2, 2021, pursuant to which we granted Topcon the exclusive right to distribute our retina and glaucoma products in certain geographies outside the United States (the “Distribution Agreement”), (iii) pursuant to an investment agreement dated March 2, 2021 (the “Investment Agreement”) the Investor acquired 1,618,122 shares of the our Common Stock for an aggregate purchase price of $10 million (the “Shares”).

Pursuant to the Asset Purchase Agreement, the transferred assets include substantially all of the Seller’s assets including the rights to the Seller’s PASCAL product (the “Transferred Assets”). We assumed only those liabilities arising after the closing in connection with the Transferred Assets. In the Asset Purchase Agreement, our company and the Seller made certain customary representations and warranties and agreed to certain customary covenants. The Agreement provides that our company and the Seller will each indemnify the other for losses arising from certain breaches of the Agreement and for certain other liabilities subject to customary caps and deductibles. If there are claims under the indemnification provisions for which we are liable we will need to use some or all our cash to settle those claims.

Pursuant to the Distribution Agreement, we appointed Topcon as the exclusive distributor of our glaucoma and retina products, including Seller’s PASCAL product, in certain countries outside of the United States. Topcon agreed to use commercially reasonable efforts to commercialize our products in each region throughout the territory, including achieving certain sales baselines by product category and region. If Topcon fails to achieve the baselines in a region, we will have the right to, subject to payment of a fee, terminate Topcon’s appointment in such region. The Distribution Agreement and Topcon’s appointment will, unless terminated earlier, continue on a country-by-country basis for a period of ten (10) years from the date exclusivity is granted. The Distribution Agreement includes customary termination rights and effects of termination, including a termination for convenience right in favor of Topcon and, subject to payment of a fee, a termination right in our favor upon a change of control of our company.

As a result of the Distribution Agreement, we anticipate terminating our relationships with our current distributors in certain geographies and using Topcon as our exclusive distributor. If we are unable to terminate our existing relationships with current distributors, or if Topcon is unable to generate as much revenue under the Distribution Agreement as we receive from our current distributors, our business, results of operations and financial condition could be adversely affected.  If there are claims under the indemnification provisions of the Distribution Agreement for which we are liable or we are unable to terminate our relationships with our current distributors, we will need to use some or all our cash to settle those claims or make payments to Topcon pursuant to the terms of the Distribution Agreement.

17

We are investing a substantial amount of time, resources and efforts in connection with our relationship with Topcon, including commercializing our products in certain geographies and working to achieve certain sales baselines by product category and region. All of these actions divert resources away from our other initiatives and operations particularly with respect to product sales in the United States. These efforts may not result in the anticipated additional products, efficiencies or revenues for our company, which could adversely affect our business, operating results and financial condition as a result.

We have incurred indebtedness under the CARES Act which may be subject to audit, may not be forgivable and may eventually have to be repaid. Any repayment of such indebtedness may limit the funds available to us and may restrict our flexibility in operating our business or otherwise adversely affect our results of operations.

In April 2020, the Company received an aggregate principal amount of approximately $2.5 million U.S. Small Business Administration Loan (the “SBA Loan”) pursuant to the Payroll Protection Program (“PPP”), established under the CARES Act. The SBA Loan is subject to forgiveness under the PPP upon the Company’s request to the extent that the proceeds are used to pay expenses permitted by the PPP, including payroll costs, covered rent and mortgage obligations, and covered utility payments. In September 2020, the Company submitted an application for forgiveness of the entire amount due on the loan. Amounts outstanding under the loan will bear a fixed interest rate of 1.00% per annum with a maturity date of April 22, 2022, two years from commencement date. All payments are deferred for 18 months for the Company with interest accruing over the entire period of the SBA Loan. The U.S. Department of the Treasury has announced that it will conduct audits for PPP loans that exceed $2 million. Should we be audited or reviewed by the U.S. Department of the Treasury or the U.S. Small Business Administration as a result of the SBA Loan or filing an application for forgiveness or otherwise, such audit or review could result in the diversion of management’s time and attention, generate negative publicity and cause us to incur legal and reputational costs. If we were to be audited and receive an adverse outcome in such an audit, we could be required to return the full amount of the SBA Loan and may potentially be subject to civil and criminal fines and penalties. We may not have the resources to repay the SBA Loan if required to do so by the federal government.

The Company cannot provide assurance that the principal and interest amounts under the PPP Loan will be forgiven. If all or substantially all of the SBA Loan is not forgiven or it is subsequently determined that it must be repaid, we may be required to use a substantial portion of our cash flows from operations to pay interest and principal on the SBA Loan. Although we currently have no intention of repaying the SBA Loan, we may decide to repay it in the future. Any such repayment of the SBA Loan will reduce the funds available to us for working capital, capital expenditures, and other corporate purposes and may limit our ability to obtain additional financing for working capital, capital expenditures, expansion plans, and other investments or divert funds that are otherwise necessary to run our business. We cannot assure you that our business will generate sufficient cash flow from operations or that future financing will be available to us in amounts sufficient to enable us to make required and timely repayments on our indebtedness, or to fund our operations. To date, we have used a substantial amount of cash for operating activities, and we cannot assure you when we will begin to generate cash from operating activities in amounts sufficient to service our debt. Additionally, though we believe we are eligible for the SBA Loan under the PPP, our receipt of the SBA Loan could result in negative publicity, or expose us to liability under the federal False Claims Act, which prohibits the known filing of a false claim or the known use of false statements to obtain payment from the federal government, if it is determined that we were in fact not eligible to take the SBA Loan in the first instance.

In addition, although we are reviewing and may seek additional available benefits under the CARES Act, we cannot predict the manner in which such benefits will be allocated or administered and we cannot assure you that we will be able to access such benefits in a timely manner or at all. Certain of the benefits under the CARES Act have not previously been administered on the present scale or at all. Government or third party program administrators may be unable to cope with the volume of applications in the near term and any benefits we receive may not be as extensive as those for which we apply, may impose additional conditions and restrictions on our operations or may otherwise provide less relief than we contemplate. If the U.S. government or any other governmental authority agrees to provide additional crisis relief assistance that we accept, it may impose certain requirements on the recipients of the aid, including restrictions on executive officer compensation, dividends, prepayment of debt, limitations on debt and other similar restrictions that will apply for a period of time after the aid is repaid or redeemed in full. We cannot assure you that any such government crisis relief assistance will not significantly limit our corporate activities or be on terms that are favorable to us. Such restrictions and terms could adversely impact our business and limit our operations and revenue as a result.

We face quality control and other production issues that could materially and adversely impact our sales and financial results and the acceptance of our products.

The manufacture of our infrared and visible laser consoles and related delivery devices is a highly complex and precise process. We may experience manufacturing difficulties, quality control issues or assembly constraints.

If our sales increase substantially, we may need to increase our production capacity and may not be able to do so in a timely, effective or cost-efficient manner. We may not be able to manufacture sufficient quantities of our products, which

18

may require that we qualify other manufacturers for our products. Furthermore, we may experience delays, disruptions, capacity constraints or quality control problems in our manufacturing operations.

In the past several years, we have experienced supply chain, production and training issues as we have expanded our product lines and sales volumes, and may experience similar issues in the future as we continue to grow our business. For example, we have contracted with a manufacturing company located in Wuhan, China for certain laser systems scheduled for release in the first half of 2021. Due to the COVID-19 outbreak, release of our manufacturing process and launch of these new laser systems may be delayed or disrupted, and we may need to incur costs to replace or shift this manufacturing process elsewhere. These issues have caused, and may in the future cause, us to reduce or delay the shipment of our products and incur costs to service or replace products already shipped to customers. We have also incurred, and may in the future incur, additional costs to rectify or prevent similar issues in the future. Our efforts to address these supply chain, production and training issues may not be successful, and if we are unable to address these issues in a timely and cost-effective manner, product shipments to our customers could be delayed, our sales levels may suffer and manufacturing and operational costs may increase, any of which would negatively impact our business, results of operations and financial condition.

Some of our laser systems are complex in design and may contain defects that are not detected until deployed by our customers, which could increase our costs and reduce our revenues.

Laser systems are inherently complex in design and require regular maintenance. The manufacture of our lasers, laser products and systems involves a highly complex and precise process. As a result of the technical complexity of our products, changes in our or our suppliers’ manufacturing processes or the inadvertent use of defective materials by us or our suppliers could result in a material adverse effect on our ability to achieve acceptable manufacturing yields and product reliability. To the extent that we do not achieve such yields or product reliability, our business, operating results, financial condition and customer relationships would be adversely affected. We provide warranties on certain of our product sales, and allowances for estimated warranty costs are recorded during the period of sale. The determination of such allowances requires us to make estimates of failure rates and expected costs to repair or replace the products under warranty. We currently establish warranty reserves based on historical warranty costs. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to recognize additional cost of revenues may be required in future periods.

Our customers may discover defects in our products after the products have been fully deployed and operated under peak stress conditions. In addition, some of our products are combined with products from other vendors, which may contain defects. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to identify and fix defects or other problems, we could experience, among other things:

The occurrence of any one or more of the foregoing factors could seriously harm our business, financial condition and results of operations.

We rely on our direct and independent sales forces and international distributors to sell our products and if we lose our sales force or distributor relationships, it could harm our business.

Our ability to sell our products and generate revenues depends upon our direct and independent sales forces within the United States, direct sales force in Germany and relationships with independent international distributors. Currently our direct and independent sales forces within the United States consist of approximately 16 employees and one independent representative, respectively and our direct sales force in Germany consists of one employee. Our international independent distributors are managed by a team of five people. We generally grant our distributors exclusive territories for the sale of our products in specified countries. The amount and timing of resources dedicated by our distributors to the sales of our products is not within our control. Our international sales are largely dependent on the efforts of these third parties. If any distributor breaches the terms of its distribution agreement with us or fails to generate sales of our products, we may be forced to replace the distributor and our ability to sell our products into that exclusive sales territory could be adversely affected.

19

We do not have any long-term employment contracts with the members of our direct sales force. We may be unable to replace our direct sales force personnel with individuals of equivalent technical expertise and qualifications, which may harm our revenues and our ability to maintain market share. Similarly, our independent contractor and distributor agreements are generally terminable at will by either party and independent contractors and distributors may terminate their relationships with us, which would affect our sales and results of operations. Any loss of the members of our existing direct or indirect sales organizations, or any failure to execute on our plans to further develop our sales function, could have an adverse impact on our business, results of operations and financial condition. Additionally, our sales forces’ operations have been disrupted by the COVID-19 pandemic, as many are no longer allowed to travel and must instead perform their services from home, which could have an impact on their ability to sell and distribute our products.

Growth in our sales and marketing organization may create operational challenges without immediately offsetting benefits.  

We have increased and continue to increase our internal sales and marketing functions. This growth may place a significant strain on our management, operating and financial systems and our sales, marketing, training and administrative resources. As a result of our growth, our operating costs may escalate even faster than planned, and some of our internal systems may need to be enhanced or replaced. For example, if we are unable to provide adequate training for our expanding sales force, our ability to fully utilize new sales and marketing resources may be adversely impacted, we could suffer reputational harm and our ability to maintain our installed base of customers may be negatively impacted. If we cannot effectively manage our expanding operations and our costs, we may not be able to grow effectively or we may grow at a slower pace, and our business could be adversely affected.

It can take six months or longer before our internal sales representatives are fully trained and productive in selling our product to prospective clients. This ramp up period presents a number of operational challenges as the cost of recruiting, hiring and carrying new sales representatives cannot be offset by the revenue such new sales representatives produce until after they complete their ramp up periods. If we cannot reliably develop our sales representatives to a productive level, or if we lose productive representatives in whom we have heavily invested, our future growth rates and revenue may suffer.

We depend on international sales for a significant portion of our operating results.

We derive, and expect to continue to derive, a large portion of our revenues from international sales. For the fiscal year 2020, our international sales were $17.0 million, or 46.9% of total revenues. We anticipate that international sales will continue to account for a significant portion of our revenues in the foreseeable future. All of our international revenues and costs for the fiscal year 2020 have been denominated in U.S. dollars except for sales transacted through our German subsidiary. As a result, an increase in the value of the U.S. dollar relative to foreign currencies makes our U.S. dollar-denominated products more expensive and thus less competitive in foreign markets and may negatively affect our reported revenue in any particular reporting period. Our international operations and sales are subject to a number of risks and potential costs, including:

20

Any one or more of these factors stated above could have a material adverse effect on our business, financial condition or results of operations.

As we expand our existing international operations, we may encounter new risks in addition to the above factors. For example, as we focus on building our international sales and distribution networks in new geographic regions, we must continue to develop relationships with qualified local distributors and trading companies. If we are not successful in developing these relationships, we may not be able to grow sales in these geographic regions. These or other similar risks could adversely affect our revenues, profitability and the price of our common stock.

If we fail to develop and successfully introduce new products and applications or fail to improve our existing products, our business prospects and operating results may suffer.

Our ability to generate incremental revenue growth will depend, in part, on the successful outcome of research and development activities, which may include clinical trials that lead to the development of new products and new applications using our products. Our research and development process is expensive, prolonged, and entails considerable uncertainty. Due to the complexities and uncertainties associated with ophthalmic research and development, products we are currently developing may not complete the development process or obtain the regulatory approvals required to market such products successfully. In addition, our research and development process has been slowed by the impact of COVID-19, and should the COVID-19 economic restrictions worsen, it could delay and disrupt our research and development processes even further.

Successful commercialization of new products and new applications will require that we effectively transfer production processes from research and development to manufacturing and effectively coordinate with our suppliers. In addition, we must successfully sell and achieve market acceptance of new products and applications and enhanced versions of existing products. The extent of, and rate at which, market acceptance and penetration are achieved by future products is a function of many variables, which include, among other things, price, safety, efficacy, reliability, marketing and sales efforts, the development of new applications for these products, the availability of third-party reimbursement of procedures using our new products, the existence of competing products and general economic conditions affecting purchasing patterns.

Our ability to market and sell new products is subject to government regulation, including approval or clearance by the FDA and foreign government agencies. Any failure in our ability to successfully develop and introduce new products or enhanced versions of existing products and achieve market acceptance of new products and new applications could have a material adverse effect on our operating results and would cause our net revenues to decline.

We are exposed to risks associated with worldwide economic slowdowns and related uncertainties.

We are subject to macro-economic fluctuations in the U.S. and worldwide economy. Concerns about consumer and investor confidence, volatile corporate profits and reduced capital spending, international conflicts, terrorist and military activity, civil unrest and pandemic illness could reduce customer orders or cause customer order cancellations. For example, the COVID-19 pandemic has and may continue to cause adverse impacts on global economic activity which could negatively impact our business. In addition, political and social turmoil related to international conflicts and terrorist acts may put further pressure on economic conditions in the United States and abroad.

Weak economic conditions and declines in consumer spending and consumption may harm our operating results. Purchases of our products are often discretionary. During uncertain economic times, customers or potential customers may delay, reduce or forego their purchases of our products and services, which may impact our business in a number of ways, including lower prices for our products and services and reducing or delaying sales. There could be a number of follow-on effects from economic uncertainty on our business, including insolvency of key suppliers resulting in product delays, delays in customer payments of outstanding accounts receivable and/or customer insolvencies, counterparty failures negatively impacting our operations, and increasing expense or inability to obtain future financing.

If economic uncertainty persisted, or if the economy entered a prolonged period of decelerating growth, our results of operations may be harmed.

21

Our operating results may fluctuate from quarter to quarter and year to year.

Our sales and operating results may vary significantly from quarter to quarter and from year to year in the future. Our operating results are affected by a number of factors, many of which are beyond our control. Factors contributing to these fluctuations include the following:

In addition to these factors, our quarterly results have been, and are expected to continue to be, affected by seasonal factors. For example, our European sales during the third quarter are generally lower due to many businesses being closed for the summer vacation season.

Our expense levels are based, in part, on expected future sales. If sales levels in a particular quarter do not meet expectations, we may be unable to adjust operating expenses quickly enough to compensate for the shortfall of sales, and our results of operations may be adversely affected. In addition, we have historically made a significant portion of each quarter’s product shipments near the end of the quarter. If that pattern continues, any delays in shipment of products could have a material adverse effect on results of operations for such quarters. Due to these and other factors, we believe that quarter to quarter and year to year comparisons of our past operating results may not be meaningful. You should not rely on our results for any quarter or year as an indication of our future performance. Our operating results in future quarters and years may be below expectations, which would likely cause the price of our common stock to fall.

We rely on continued market acceptance of our existing products and any decline in sales of our existing products would adversely affect our business and results of operations.

We currently market visible and infrared medical laser systems and delivery devices to the ophthalmology market. We believe that continued and increased sales, if any, of these medical laser systems is dependent upon a number of factors including the following:

22

In addition, we derive a meaningful portion of our sales in the form of recurring revenues from selling consumable instrumentation, including our Cyclo G6 probe and EndoProbe devices. Our ability to increase recurring revenues from the sale of consumable products will depend primarily upon the features of our current products and product innovation, the quality of, ease of use and prices of our products, including the relationship to prices of competing products. The level of our service revenues will depend on the quality of service we provide and the responsiveness and the willingness of our customers to request our services rather than purchase competing products or services. Any significant decline in market acceptance of our products or our revenues derived from the sales of laser consoles, delivery devices, consumables or services may have a material adverse effect on our business, results of operations and financial condition.

We face strong competition in our markets and expect the level of competition to grow in the foreseeable future.

Competition in the market for laser systems and delivery devices used for ophthalmic treatment procedures is intense and is expected to increase. This market is also characterized by technological innovation and change. We compete by providing features and services that are valued by our customers such as: enhanced product performance and clinical outcomes, ease of use, durability, versatility, customer training services and rapid repair of equipment.

Our principal ophthalmic laser competitors are Alcon, Inc., Novartis AG, Bausch Health Companies Inc., Carl Zeiss Meditec AG, Ellex Medical Lasers, Ltd., Lumenis Ltd., Nidek Co. Ltd., Quantel Medical SA, OD-OS GmbH and A.R.C. Laser GmbH.  We also compete with alternative glaucoma surgical device companies such as Alcon, Inc., Allergan, Inc., Glaukos Corporation, New World Medical, Inc. and Ivantis, Inc. Pharmaceuticals represent alternative treatments to our laser procedures.  Some of our principal pharmaceutical competitors are Alcon, Inc., Allergan, Inc., Astellas Pharma Inc., Pfizer Inc., Regeneron Pharmaceuticals, Inc., Roche Holdings Ltd. (Genentech) and Bausch Health Companies Inc.  Some of our competitors have substantially greater financial, engineering, product development, manufacturing, marketing and technical resources than we do. Some companies also have greater name recognition than us and long-standing customer relationships. In addition, other medical device companies, academic and research institutions, or others, may develop new technologies or therapies, including medical devices, surgical procedures or pharmacological treatments and obtain regulatory approval for products utilizing such techniques that are more effective in treating the conditions targeted by us, or are less expensive than our current or future products. Our technologies and products could be rendered obsolete by such developments. Any such developments could have a material adverse effect on our business, financial condition and results of operations.

Our ability to raise capital in the future may be limited, and future sales and issuances of securities could negatively affect our stock price and dilute the ownership interest of our existing investors.

Our business and operations may consume resources faster than we anticipate. We may need in the future to raise additional funds through future equity or debt financings to meet our operational needs and capital requirements for product development, clinical trials and commercialization and may subsequently require additional fundraising. Additional financing may not be available on favorable terms, if at all. If adequate funds are not available on acceptable terms, we may be unable to invest in future growth opportunities, which could seriously harm our business and operating results. Future sales or issuances of securities by us could decrease the value of our common stock, dilute stockholders’ voting power and reduce future potential earnings per share.

To raise capital, we may sell common stock, convertible securities or other equity-linked securities in one or more transactions at prices and in a manner we determine from time to time. If we sell additional equity securities, our existing stockholders may be materially diluted. Additionally, new investors could gain rights, preferences and privileges senior to those of existing holders of our common stock. We may also issue debt securities, which may impose restrictive covenants on our operations or otherwise adversely affect the holdings or the rights of our stockholders.

We may sell shares or other securities in any offering at a price per share that is less than the price per share paid by existing investors, and investors purchasing shares or other securities in the future could have rights superior to existing stockholders. The price per share at which we sell additional shares of our common stock, or securities convertible or exchangeable into common stock, in future transactions may be higher or lower than the price per share paid by existing investors.

23

Our operating results may be adversely affected by uncertainty regarding healthcare reform measures and changes in third-party coverage and reimbursement policies.

Our products are typically purchased by doctors, clinics, hospitals and other users, which bill various third-party payers, such as governmental programs and private insurance plans, for the health care services provided to their patients. Changes in government legislation or regulation or in private third-party payers’ policies toward reimbursement for procedures employing our products may prohibit adequate reimbursement. There have been a number of legislative and regulatory proposals to change the healthcare system, reduce the costs of healthcare and change medical reimbursement policies. Doctors, clinics, hospitals and other users of our products may decline to purchase our products to the extent there is uncertainty regarding reimbursement of medical procedures using our products and any healthcare reform measures. Further proposed legislation, regulation and policy changes affecting third-party reimbursement are likely. Among other things, Congress has in the past proposed changes to and the repeal of the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010, collectively, the “Affordable Care Act”, and the current U.S. presidential administration has announced certain policy changes that could impact the availability of benefits under the Affordable Care Act. For example, tax reform legislation enacted at the end of 2017 eliminated the tax penalty for individuals who did not maintain sufficient health insurance coverage beginning in 2019 (the “individual mandate”). We anticipate continued Congressional interest in modifying provisions of the Affordable Care Act. At this time, it remains unclear whether there will be any changes made to or any repeal of the Affordable Care Act, with respect to certain of its provisions or in its entirety or related administrative policies. Various healthcare reform proposals have also emerged at the state level.

We are unable to predict what legislation or regulation, if any, relating to the health care industry or third-party coverage and reimbursement may be enacted in the future at the state or federal level, or what effect such legislation or regulation may have on us. Furthermore, existing legislation and regulation related to the health care industry and third-party coverage reimbursement, including the Affordable Care Act, has been subject to judicial challenge, and may be subject to similar challenges from time to time in the future (such as the ongoing California v. Texas case). Denial of coverage and reimbursement of our products, or the revocation or changes to coverage and reimbursement policies, could have a material adverse effect on our business, results of operations and financial condition.

Third-party payers are increasingly scrutinizing and continue to challenge the coverage of new products and the level of reimbursement for covered products. Doctors, clinics, hospitals and other users of our products may not obtain adequate reimbursement for use of our products from third-party payers. While we believe that the laser procedures using our products have generally been reimbursed, payers may deny coverage and reimbursement for our products if they determine that the device was not reasonable and necessary for the purpose used, was investigational or was not cost-effective.

If we fail to comply with healthcare laws, we could face substantial penalties and financial exposure, and our business, operations and financial condition could be adversely affected.

While we do not bill directly to Medicare, Medicaid or other third-party payors, because payment is in many cases available for our products from such payors, many healthcare laws place limitations and requirements on the manner in which we conduct our business (including our sales and promotional activities and interactions with healthcare professionals and facilities) and could result in liability and exposure for us. The laws that may affect our ability to operate include (i) the federal Anti-Kickback Statute, which prohibits, among other things, persons from knowingly and willfully soliciting, receiving, offering or paying remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual for, or the purchase, order or recommendation of, any good or service for which payment may be made under federal healthcare programs such as Medicare or Medicaid, (ii) federal false claims laws which prohibit, among other things, individuals or entities from knowingly presenting, or causing to be presented, claims for payment from Medicare, Medicaid, or other third-party payors that are false or fraudulent, and which may apply to entities like us if we provide coding and billing advice to customers, or under theories of “implied certification” where the government and qui tam relators may allege that device companies are liable where a product that was paid for by the government in whole or in part was promoted “off-label,” lacked necessary clearance or approval, or failed to comply with good manufacturing practices or other laws; (iii) transparency laws and related reporting and disclosures requirements such as the federal Sunshine Act, now known as Open Payments; and/or (iv) state law equivalents of each of the above federal laws, including, without limitation anti-kickback and false claims laws which may apply to items or services reimbursed by any third-party payor, including commercial insurers, many of which differ from their federal counterparts in significant ways, thus complicating compliance efforts.

24

If our operations are found to be in violation of any of the laws described above or any other governmental regulations that apply to us, we may be subject to penalties, including civil and criminal penalties, exclusion from participation in government healthcare programs, damages, fines and the curtailment or restructuring of our operations. Any penalties, damages, fines, curtailment or restructuring of our operations could adversely affect our ability to operate our business and our financial results. The risk of our being found in violation of these laws is increased by the fact that their provisions are open to a variety of evolving interpretations and enforcement discretion. Compliance with Open Payments, commonly known as the Sunshine Act, has presented a number of challenges to companies such as ours, in terms of interpretation of the law and its implementation. Under the Sunshine Act, Centers for Medicare & Medicaid Services (“CMS”) has the potential to impose penalties of up to $1.15 million per year for violations, depending on the circumstances, although enforcement has been negligible to date. Payments reported under the Sunshine Act also have the potential to draw scrutiny on payments to and relationships with physicians, which may have implications under the Anti-Kickback Statute and other healthcare laws. The risk that we are our being found in violation of these laws may be increased by the fact that we do not have a formal healthcare compliance program in place. Further, while safe harbors may in some instances be available and utilized by companies to reduce risks associated with the Anti-Kickback Statute and certain other healthcare laws, we have not necessarily utilized such safe harbors nor fully followed all elements required to claim the benefit of such safe harbors in all possible instances. Any action against us for violation of these laws, even if we successfully defend against it, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business.

We depend on collaborative relationships to develop, introduce and market new products, product enhancements and new applications.

We depend on both clinical and commercial collaborative relationships. We have entered into collaborative relationships with academic medical centers and physicians in connection with the research and innovation and clinical testing of our products. Commercially, we currently have a distribution and licensing agreement with Alcon for our GreenTip SoftTip Cannula. Sales of and royalties from the GreenTip SoftTip Cannula are dependent upon the sales performance of Alcon, which depends on their efforts and is beyond our control. The failure to obtain any additional future clinical or commercial collaborations and the resulting failure or success of such collaboration relationships could have a material adverse effect on our ability to introduce new products or applications and therefore could have a material adverse effect on our business, results of operations and financial condition.

If we cannot increase our sales volumes, reduce our costs or introduce higher margin products to offset potential reductions in the average unit price of our products, our operating results may suffer.

The average unit price of our products may decrease in the future in response to changes in product mix, competitive pricing pressures, new product introductions by our competitors or other factors. If we are unable to offset the anticipated decrease in our average selling prices by increasing our sales volumes or through new product introductions, our net revenues will decline. In addition, to maintain our gross margins we must continue to reduce the manufacturing cost of our products. If we cannot maintain our gross margins our business could be seriously harmed, particularly if the average selling price of our products decreases significantly without a corresponding increase in sales.

Our promotional practices are subject to extensive government scrutiny. We may be subject to governmental, regulatory and other legal proceedings relative to advertising, promotion and marketing that could have a significant negative effect on our business.

We are subject to governmental oversight and associated civil and criminal enforcement relating to drug and medical device advertising, promotion, and marketing, and such enforcement is evolving and intensifying. In the United States, we are subject to potential enforcement from the FDA, the U.S. Federal Trade Commission, the Department of Justice, the CMS, other divisions of the Department of Health and Human Services and state and local governments. Other parties, including private plaintiffs, also are commonly bringing suit against pharmaceutical and medical device companies, alleging off-label marketing and other violations. We may be subject to liability based on the actions of individual employees and contractors carrying out activities on our behalf, including sales representatives who may interact with healthcare professionals.

If we fail to manage growth effectively, our business could be disrupted which could harm our operating results.

We have experienced and may in the future experience growth in our business, both organically and through the acquisition of businesses and products. We have made and expect to continue to make significant investments to enable our future growth through, among other things, new product innovation and clinical trials for new applications and products. We must also be prepared to expand our work force and to train, motivate and manage additional employees as the need for additional personnel arises. Our personnel, systems, procedures and controls may not be adequate to support our future operations. Any failure to effectively manage future growth could have a material adverse effect on our business, results of operations and financial condition.

25

We rely on patents and proprietary rights to protect our intellectual property and business.

Our success and ability to compete is dependent, in part, upon our proprietary information. We rely on a combination of patents, trade secrets, copyright and trademark laws, nondisclosure and other contractual agreements and technical measures to protect our intellectual property rights. We file patent applications to protect technology, inventions and improvements that are significant to the development of our business. As of January 2, 2021, our patent portfolio includes 25 active United States patents and seven active foreign patents on the technologies related to our products and processes. In addition, as of January 2, 2021, we have seven patent applications pending in the United States and 12 foreign patent applications pending. Our patent applications may not be approved. Any patents granted now or in the future may offer only limited protection against potential infringement and development by our competitors of competing products. Moreover, our competitors, many of which have substantial resources and have made substantial investments in competing technologies, may seek to apply for and obtain patents that will prevent, limit or interfere with our ability to make, use or sell our products either in the United States or in international markets. Patents have a limited lifetime and once a patent expires competition may increase.

In addition to patents, we rely on trade secrets and proprietary know-how which we seek to protect, in part, through proprietary information agreements with employees, consultants and other parties. Our proprietary information agreements with our employees and consultants contain industry standard provisions requiring such individuals to assign to us, without additional consideration, any inventions conceived or reduced to practice by them while employed or retained by us, subject to customary exceptions. Proprietary information agreements with employees, consultants and others may be breached, and we may not have adequate remedies for any breach. Also, our trade secrets may become known to or independently developed by competitors.

The laser and medical device industry is characterized by frequent litigation regarding patent and other intellectual property rights. Companies in the medical device industry have employed intellectual property litigation to gain a competitive advantage.

Numerous patents are held by others, including academic institutions and our competitors. Patent applications filed in the United States generally will be published eighteen months after the filing date. However, since patent applications continue to be maintained in secrecy for at least some period of time, both within the United States and internationally, we cannot provide assurance that our technology does not infringe any patents or patent applications held by third parties. We have, from time to time, been notified of, or have otherwise been made aware of, claims that we may be infringing upon patents or other proprietary intellectual property owned by others. If it appears necessary or desirable, we may seek licenses under such patents or proprietary intellectual property. Although patent holders commonly offer such licenses, licenses under such patents or intellectual property may not be offered or the terms of any offered licenses may not be reasonable.

Any claims, with or without merit, and regardless of whether we are successful on the merits, would be time-consuming, result in costly litigation and diversion of technical and management personnel, cause shipment delays or require us to develop non-infringing technology or to enter into royalty or licensing agreements. An adverse determination in a judicial or administrative proceeding and failure to obtain necessary licenses or develop alternate technologies could prevent us from manufacturing and selling our products, which would have a material adverse effect on our business, results of operations and financial condition.

If we lose key personnel or fail to integrate replacement personnel successfully, our ability to manage our business could be impaired.

Our future success depends upon the continued service of our key management, technical, sales, and other critical personnel. Our officers and other key personnel are employees-at-will, and we cannot provide assurance that we will be able to retain them. Key personnel have left our company in the past, and there likely will be additional departures of key personnel from time to time in the future. The loss of any key employee could result in significant disruptions to our operations, including adversely affecting the timeliness of product releases, the successful implementation and completion of company initiatives, and the results of our operations. Competition for these individuals is intense, and we may not be able to attract, assimilate or retain highly qualified personnel. Competition for qualified personnel in our industry and the San Francisco Bay Area, as well as other geographic markets in which we recruit, is intense and characterized by increasing salaries, which may increase our operating expenses or hinder our ability to recruit qualified candidates. In addition, the integration of replacement personnel could be time consuming, may cause additional disruptions to our operations, and may be unsuccessful.

Efforts to acquire additional companies or product lines may divert our managerial resources away from our business operations, and if we complete additional acquisitions, we may incur or assume additional liabilities or experience integration problems.

As part of our growth strategy, we seek to acquire businesses or product lines for various reasons, including adding new products, adding new customers, increasing penetration with existing customers, adding new manufacturing capabilities or expanding into new geographic markets. Our ability to successfully grow through acquisitions depends upon our ability to

26

identify, negotiate, complete and integrate suitable acquisitions and to obtain any necessary financings. These efforts could divert the attention of our management and key personnel from our business operations. If we complete future acquisitions, we may also experience:

Moreover, we cannot assure you that the anticipated benefits of any acquisition or investment would be realized or that we would not be exposed to unknown liabilities. In connection with these types of transactions, we may issue additional equity securities that would dilute the ownership interest of existing investors or earnings per share, use cash that we may need in the future to operate our business, incur debt on terms unfavorable to us or that we are unable to repay, incur large charges or substantial liabilities, encounter difficulties integrating diverse business cultures and become subject to adverse tax consequences, substantial depreciation or deferred compensation charges. These challenges related to acquisitions or investments could adversely affect our business, operating results and financial condition.

If we fail to accurately forecast demand for our product and component requirements for the manufacture of our product, we could incur additional costs or experience manufacturing delays and may experience lost sales or significant inventory carrying costs.

We use quarterly and annual forecasts based primarily on our anticipated product orders to plan our manufacturing efforts and determine our requirements for components and materials. It is very important that we accurately predict both the demand for our product and the lead times required to obtain or manufacture the necessary components, materials, and fully assembled products. Lead times for components and fully assembled products vary significantly and depend on numerous factors, including the specific supplier, the size of the order, contract terms and current market demand for such products. If we overestimate the demand for our product, we may have excess inventory, which would increase our costs. If we underestimate demand for our product and consequently, our components, materials and fully assembled products requirements, we may have inadequate inventory, which could interrupt our manufacturing, delay delivery of our product to our customers and result in the loss of customer sales. Any of these occurrences would negatively impact our business and operating results.

We depend on sole source or limited source suppliers.

We rely on third parties to manufacture substantially all of the components used in our products, including optics, laser diodes and crystals. We have some long term or volume purchase agreements with our suppliers and currently purchase components and fully-assembled products on a purchase order basis. Some of our suppliers and manufacturers are sole or limited source suppliers. In addition, some of these suppliers are relatively small private companies whose operations may be disrupted or discontinued at any time. There are risks associated with the use of independent manufacturers, including the following:

Our business and operating results may suffer from the lack of alternative sources of supply for critical sole and limited source components and fully-assembled products. The process of qualifying suppliers is complex, requires extensive testing with our products, and may be lengthy, particularly as new products are introduced. New suppliers would have to be educated in our production processes. In addition, the use of alternate components may require design alterations to our products and additional product testing under FDA and relevant foreign regulatory agency guidelines, which may delay sales and increase product costs. Any failures by our vendors to adequately supply limited and sole source components or products may impair our ability to offer our existing products, delay the submission of new products for regulatory approval and market introduction, materially harm our business and financial condition and cause our stock price to decline. Establishing our own

27

capabilities to manufacture these components or products would be expensive and could significantly decrease our profit margins. Our business, results of operations and financial condition would be adversely affected if we are unable to continue to obtain components or fully-assembled products in the quantity and quality desired and at the prices we have budgeted.

If our facilities were to experience catastrophic loss, our operations would be seriously harmed.

Our facilities could be subject to catastrophic loss such as fire, flood, unpredictable power outages, or earthquake. All of our research and development activities, manufacturing, our corporate headquarters and other critical business operations are located near major earthquake faults in Mountain View, California. California can experience earthquakes, catastrophic wildfires, and intermittent power outages. Any such loss at any of our facilities caused by fires, flooding, power outages, or earthquakes could disrupt our operations, delay production, shipments and revenue and result in large expense to repair and replace our facilities.

If we experience a significant disruption in our information technology systems or breaches of data security, our business could be adversely affected.

We rely on information technology systems to keep financial records and corporate records, communicate with staff and external parties and operate other critical functions, including sales and manufacturing processes. Our information technology systems are potentially vulnerable to disruption due to breakdown or malicious intrusion and computer viruses. If we were to experience a prolonged system disruption in our information technology systems, it could negatively impact the coordination of our sales, planning and manufacturing activities, which could adversely affect our business. In addition, in order to maximize our information technology efficiency, we have physically consolidated our primary corporate data and computer operations. This concentration, however, exposes us to a greater risk of disruption to our internal information technology systems. Although we maintain offsite back-ups of our data, if operations at our facilities were disrupted, it may cause a material disruption in our business if we are not capable of restoring function on an acceptable time frame.

In addition, our information technology systems are potentially vulnerable to cyber-attacks or other data security breaches-whether by employees or others-which may expose sensitive data to unauthorized persons. Such data security breaches could lead to the loss of trade secrets or other intellectual property, or could lead to the public exposure of sensitive and confidential information of our employees, customers, suppliers and others, any of which could have a material adverse effect on our business, financial condition and results of operations.

While we have implemented a number of protective measures, including firewalls, antivirus and malware detection tools, patches, log monitors, routine back-ups, system audits, routine password modifications and disaster recovery procedures, such measures may not be adequate or implemented properly to prevent or fully address the adverse effect of such events, and in some cases we may be unaware of an incident or its magnitude and effects. If we are unable to prevent such security breaches or privacy violations or implement satisfactory remedial measures, our operations could be disrupted, and we may suffer loss of reputation, financial loss and other regulatory penalties because of lost or misappropriated information. In addition, these breaches and other inappropriate access can be difficult to detect, and any delay in identifying them may lead to increased harm of the type described above.

If we fail to maintain our relationships with health care providers, customers may not buy our products and our revenue and profitability may decline. At the same time, relationships with these individuals and entities are the subject of heightened scrutiny and may present the potential for healthcare compliance risks.

We market our products to numerous health care providers, including physicians, hospitals, ambulatory surgery centers, government affiliated groups and group purchasing organizations. We have developed and strive to maintain close relationships with members of each of these groups who assist in product research and development and advise us on how to satisfy the full range of surgeon and patient needs. We rely on these groups to recommend our products to their patients and to other members of their organizations. The failure of our existing products and any new products we may introduce to retain the support of these various groups could have a material adverse effect on our business, financial condition and results of operations. In addition, our interactions, communications, and financial relationships with these individuals and entities present potential healthcare compliance risks.

We are subject to government regulations which may cause us to delay or withdraw the introduction of new products or new applications for our products.

The medical devices that we market and manufacture are subject to extensive regulation by the FDA and by foreign and state governments. Under the FD&C Act and the related regulations, the FDA regulates the design, development, clinical testing, manufacture, labeling, sale, distribution and promotion of medical devices. Before a new device can be introduced into the market, the product must be shown to meet regulatory requirements established by the FD&C Act and implemented by the FDA. Unless otherwise exempt, a device manufacturer must obtain marketing “clearance” through the 510(k) premarket notification process, or “approval” through the lengthier premarket approval application (“PMA”) process. Not all devices are eligible for the 510(k) clearance process. Depending upon the type, complexity and novelty of the device and the nature of the disease or disorder to be treated, the PMA process can take several years, require extensive clinical testing and result in significant expenditures. Even if regulatory clearance or approval is obtained, later discovery of previously unknown safety issues may result in restrictions on the product, including withdrawal of the product from the market. Other countries also have extensive regulations regarding clinical trials and testing prior to new product introductions. Our failure to obtain

28

government approvals or any delays in receipt of such approvals would have a material adverse effect on our business, results of operations and financial condition.

The FDA imposes a broad range of additional requirements on medical device companies. Our products must be produced in compliance with the Quality System Regulation (“QSR”) and our manufacturing facilities are subject to establishment registration and device listing requirements from the FDA, and similar requirements from certain state authorities, and ongoing periodic inspections by the FDA, including unannounced inspections for compliance with applicable requirements. We are subject to monitoring, recordkeeping, and reporting obligations for medical device adverse events and malfunctions; notification of our products’ defects or failure to comply with the FDA’s laser regulations; and reporting of recalls, corrections, or removals of our products. The FDA also imposes requirements for the labeling of our products, and places limitations on claims we are permitted to make about our products in promotional labeling. The Federal Trade Commission has jurisdiction over the advertising of all of our products, which are non-restricted devices, and exercises oversight in coordination with the FDA.

Noncompliance with the applicable requirements can result in, among other things, regulatory citations (including “483 Observations”) and Warning Letters, fines, injunctions, civil penalties, recall or seizure of products, total or partial suspension of production, withdrawal of marketing approvals, and criminal prosecution. The FDA also has the authority to request repair, replacement or refund of the cost of any device we manufacture or distribute. Any of these actions by the FDA would materially and adversely affect our ability to continue operating our business and the results of our operations. Such enforcement action can also result in negative publicity.

In addition, we are also subject to varying product standards, packaging requirements, labeling requirements, tariff regulations, duties and tax requirements. As a result of our sales in Europe, we are required to have all products “CE” marked, an international symbol affixed to all products demonstrating compliance with the European Medical Device Directives and all applicable standards. While currently all of our released products are CE marked, continued certification is based on the successful review of our quality system by our European Registrar during their annual audit. Any loss of certification would have a material adverse effect on our business, results of operations and financial condition. There are a number of major regulatory changes occurring in the regulation of medical devices in the EU. A new revision of the quality system regulation (ISO 13485:2016) has been released that substantially increases the requirements for a medical device quality system. The Medical Device Regulation (“MDR”) will replace the current medical device directives (93/42/EEC), and it substantially changes the way that medical devices are brought to market in the EU and how they maintain compliance throughout the product’s life cycle. Due to the UK’s exit from EU (“Brexit”), different rules will apply in Great Britain (England, Wales and Scotland), Northern Ireland and the EU after the Brexit transition period, which began January 1, 2021. Additionally, the new revision 4 of the clinical evaluation report guidance document (MEDDEV 2.7.1) severely restricts the use of substantial equivalence for new products, resulting in the need for formal clinical trial data for most new products. These changes will increase the cost for compliance and for product development, and they lengthen product introduction cycles. Failure to comply with these changes can have an adverse effect on our ability to release new products in a timely manner.

Any clinical trials necessary that we may undertake for regulatory approval or marketing reasons will be an expensive, lengthy, costly, and uncertain process, and could result in delays in new product introductions or even an inability to release a product.

We may be required to undertake clinical trials often required to obtain regulatory approvals or may choose to undertake such trials for marketing or other reasons.  Clinical trials for products such as ours are complex and expensive and their outcomes are uncertain.  Any clinical trials that we may undertake would require the investment of significant financial and administrative resources.  Moreover, the results of clinical trials are uncertain, and inconclusive or negative results may not support, or may impair, the sale and adoption of our products. We may suffer significant setbacks in clinical trials, even after earlier clinical trials showed promising results. Any of our products could produce undesirable side effects that could cause us or regulatory authorities to interrupt, delay or halt clinical trials of a product candidate. We, the FDA, or another regulatory authority could suspend or terminate clinical trials at any time if they or we believed the trial participants faced unacceptable health risks.

If we fail to comply with the FDA’s quality system regulation and laser performance standards, our manufacturing operations could be halted, and our business would suffer.

We are currently required to demonstrate and maintain compliance with the FDA’s QSR. The QSR is a complex regulatory scheme that covers the methods and documentation of the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage and shipping of our products. Because our products involve the use of lasers, our products also are covered by a performance standard for lasers set forth in FDA regulations. The laser performance standard imposes specific record-keeping, reporting, product testing and product labeling requirements. These requirements include affixing warning labels to laser products, as well as incorporating certain safety features in the design of laser products. The FDA enforces the QSR and laser performance standards through periodic unannounced inspections. We have been, and anticipate in the future being, subject to such inspections. Our failure to take satisfactory corrective action in response to an adverse QSR inspection or our failure to comply with applicable laser performance standards could result in enforcement actions, including a public warning letter, a shutdown of our manufacturing operations, a recall of our products, civil or criminal penalties, or other sanctions, which would cause our sales and business to suffer.

29

If we modify one of our FDA cleared devices, we may need to submit a new 510(k), or potentially a PMA, and if clearance or approval is not obtained, it would prevent us from selling our modified products or cause us to redesign our products.

Any modifications to an FDA-cleared device that would significantly affect its safety or effectiveness or that would constitute a major change in its intended use would require a new 510(k) clearance or possibly a PMA. We may not be able to obtain additional 510(k) clearances or premarket approvals for new products or for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenues and future profitability. We have made modifications to our devices in the past and may make additional modifications in the future that we believe do not or will not require additional clearances or approvals. If the FDA disagrees, and requires new clearances or approvals for the modifications, we may be required to recall and to stop marketing the modified devices, which could harm our operating results and require us to redesign our products.

Our products may be misused, which could harm our reputation and our business.

We market and sell our products for use by highly skilled physicians with specialized training and experience in the treatment of eye-related disorders. We, and our distributors, generally offer but do not require purchasers or operators of our products to attend training sessions, nor do we supervise the procedures performed with our products. The physicians who operate our products are responsible for their use and the treatment regime for each individual patient. In addition, non-physicians, particularly in countries outside of the United States, or poorly trained or inexperienced physicians, may make use of our products. Our efforts to market our MicroPulse systems as a fovea-friendly alternative to traditional continuous wavelength systems or alternative treatment methods may result in users failing to implement adequate safety precautions and thereby increase the risks associated with the misuse of our product. The lack of training and the purchase and use of our products by non-physicians or poorly trained or inexperienced physicians may result in product misuse and adverse treatment outcomes, which could harm our reputation and expose us to costly product liability litigation, or otherwise cause our business to suffer.

Inability of customers to obtain credit or material increases in interest rates may harm our sales.

Some of our products are sold to health care providers in general practice. Many of these health care providers purchase our products with funds they secure through various financing arrangements with third-party financial institutions, including credit facilities and short-term loans. If availability of credit becomes more limited, or interest rates increase, these financing arrangements may be harder to obtain or become more expensive for our customers, which may decrease demand for our products. Any reduction in the sales of our products would cause our business to suffer.

Our products could be subject to recalls even after receiving FDA approval or clearance. A recall would harm our reputation and adversely affect our operating results.

The FDA and similar governmental authorities in other countries in which we market and sell our products have the authority to require the recall of our products in the event of material deficiencies or defects in the design or manufacture of our products, or in other cases we may determine that we will recall a product because we have determined that the product is violative, in order to avoid further enforcement action and protect the public health.

A government mandated recall, or a voluntary recall by us, could occur as a result of actual or potential component failures, adverse event reports, manufacturing errors or design defects, including defects in labeling. Furthermore, we may from time to time initiate a recall of a component or set of components comprising a portion of our laser systems, which could increase customer returns, warranty claims and associated reserve levels. A recall could divert management’s attention, cause us to incur significant expenses, harm our reputation with customers and negatively affect our future sales and financial results.

For example, on February 23, 2018, we initiated a worldwide voluntary recall of a specific laser accessory called the TruFocus LIO Premiere^® (“LIO”). The LIO is a head-mounted indirect ophthalmoscope that connects to our laser console and is used to view and perform laser treatment on a patient’s retina. This recall was prompted after we received reports of three adverse events from one physician in the U.S., resulting in focal cataracts and iris burns occurring during procedures in which the TruFocus LIO Premiere was used. We identified several potential root causes for the adverse events, including use error. On March 22, 2019, we provided the FDA with a request for termination of Recall Number Z-1075-2018. Our termination request is pending.

We obtained FDA clearance for an updated TruFocus LIO Premiere^® device. The updated device includes expanded user instructions and minor design changes. Use of the updated LIO may result in adverse events, including those observed with the prior LIO device. If physician use of our updated LIO results in serious adverse events, we may have to initiate another recall or utilize additional resources to further evaluate the design of the LIO device. Furthermore, in light of the recall, we cannot provide any assurance that the updated LIO, once launched, will achieve market acceptance. We will be required to devote significant resources to launch and market the updated LIO and cannot provide any assurance that these activities will generate revenue as anticipated. If our revenue grows more slowly than we expect because of a delay in or a lack of market acceptance for our updated LIO, our business and financials will be adversely affected.

30

If product liability claims are successfully asserted against us, we may incur substantial liabilities that may adversely affect our business or results of operations.

We may be subject to product liability claims from time to time. Our products are highly complex and the risk of significant patient injury is more likely with products and procedures involving the eye. Use of our products incorrectly can result in temporary or permanent loss in vision, burns, scarring, blind spots or other injuries of the eye and we may periodically become subject to product liability lawsuits as a result. We believe we maintain adequate levels of product liability insurance to cover such claims subject to certain deductibles. However, product liability insurance is expensive and we might not be able to obtain product liability insurance in the future on acceptable terms or in sufficient amounts to protect us, if at all. A successful claim brought against us in excess of our insurance coverage could have a material adverse effect on our business, results of operations and financial condition.

Significant developments resulting from recent and potential changes in United States trade policies could have a material adverse effect on us.

Certain of our materials may be subject to the effects of various trade agreements, treaties and tariffs. The recent U.S. presidential administration has imposed tariffs on various goods from various countries, including China, Canada and the European Union (“EU”), and announced intentions to impose furthermore significant tariffs on certain United States imports. As a result, Canada, the EU, China and other countries have responded with retaliatory tariffs on certain United States exports. We cannot predict the effect these and potential additional tariffs will have on our business, including in the context of escalating trade tensions. Further tariffs, additional taxes, or trade barriers, both domestically and internationally, may affect our selling and/or manufacturing costs and margins, the competitiveness of our products, or our ability to sell products or purchase necessary equipment and supplies, and consequently affect our business, results of operations, or financial conditions. To the extent that trade tariffs and other restrictions imposed by the United States increase the price of, or limit the amount of, raw materials and finished goods imported into the United States, the costs of our raw materials may be adversely affected and the demand from our customers for products and services may be diminished, which could adversely affect our revenues and profitability.

In addition, these potential developments and any market perceptions concerning these and related issues and the attendant regulatory uncertainty regarding, for example, the posture of governments with respect to international trade, could have a material adverse effect on global trade and economic growth which, in turn can adversely affect our business. Furthermore, changes in United States trade policy have resulted and could result in additional reactions from United States trading partners and other countries, including adopting responsive trade policies that make it more difficult or costly for us to export our products to those countries. We sell a significant majority of our products into countries outside the United States and we purchase a significant portion of equipment and supplies from suppliers outside the United States. These measures could also result in increased costs for goods imported into the U.S. or may cause us to adjust our worldwide supply chain. Any of these effects could require us to increase prices to our customers which may reduce demand, or, if we are unable to increase prices, may result in lowering our margin on products sold.

We cannot predict future trade policy or the terms of any renegotiated trade agreements and their impacts on our business. The adoption and expansion of trade restrictions, the occurrence of a trade war, or other governmental action related to tariffs or trade agreements or policies has the potential to adversely impact demand for our products, our costs, our customers, our suppliers, and the United States economy, which in turn could adversely impact our business, financial condition and results of operations.

Changes in U.S. tax laws could have a material adverse effect on our business, cash flow, results of operations or financial conditions.

The comprehensive tax legislation commonly referred to as the Tax Cuts and Jobs Act (the “Tax Act”) was enacted in the United States on December 22, 2017 and includes, among other items, a reduction in the federal corporate income tax rate from 35% to 21%, certain interest expense deduction limitations and changes in the timing of certain taxable income. We are required to recognize the effect of the tax law changes in the period of enactment, such as re-measuring our U.S. deferred tax assets and liabilities and reassessing the net realizability of our deferred tax assets and liabilities.

On December 22, 2017, the SEC staff issued Staff Accounting Bulletin No. 118 (“SAB 118”) which provides guidance on accounting for the tax effects of the Tax Act. We have completed our analysis and accounting with respect the Tax Act, and identified no additional changes from amounts previously recorded. However, changes in law, interpretations, and facts may result in adjustments to these amounts. Based on the our net operating loss carryovers and valuation allowance, there is no impact to its consolidated financial statements as a result of the accounting for the tax effects of the Tax Act.

Subsequent legislations, guidance, regulations or audits that differ from our prior assumptions and interpretations, or other factors which were not anticipated at the time we estimated our tax provision could have a material adverse effect on our business, cash flow, results of operations or financial condition.

31

We are subject to federal, state and foreign laws governing our business practices which, if violated, could result in substantial penalties. Additionally, challenges to or investigation into our practices could cause adverse publicity and be costly to respond to and thus could harm our business.

The Dodd-Frank Wall Street Reform and Consumer Protection Act requires us to track and disclose the source of certain metals used in manufacturing which may stem from minerals (so called “conflict minerals”) which originate in the Democratic Republic of the Congo or adjoining regions. These metals include tantalum, tin, gold and tungsten. These metals are central to the technology industry and are present in some of our products as component parts. In most cases no acceptable alternative material exists which has the necessary properties. It is not possible to determine the source of the metals by analysis but instead a good faith description of the source of the intermediate components and raw materials must be obtained. The components which incorporate those metals may originate from many sources and we purchase fabricated products from manufacturers who may have a long and difficult-to-trace supply chain. As the spot price of these materials varies, producers of the metal intermediates can be expected to change the mix of sources used, and components and assemblies which we buy may have a mix of sources as their origin. We are required to carry out a diligent effort to determine and disclose the source of these materials. There can be no assurance we can obtain this information from intermediate producers not willing or not able to provide this information or further identify their sources of supply or to notify us if these sources change. These metals are subject to price fluctuations and shortages which can affect our ability to obtain the manufactured materials we rely on at favorable terms or from consistent sources. These changes could have an adverse impact on our ability to manufacture and market our devices and products.

Divestitures of some of our businesses or product lines may materially and adversely affect our financial condition, results of operations or cash flows and require us to raise additional capital to replace revenue from those business units or product lines.

We evaluate the performance and strategic fit of all of our businesses and may sell businesses or product lines. Divestitures involve risks, including difficulties in the separation of operations, services, products and personnel, the diversion of management's attention from other business concerns, the disruption of our business, the potential loss of key employees and the retention of uncertain environmental or other contingent liabilities related to the divested business. In addition, divestitures may result in significant asset impairment charges, including those related to goodwill and other intangible assets, and the loss of revenue which could have a material adverse effect on our financial condition and results of operations. In addition, we may need to raise additional capital to replace the revenue generated from the business or product line that is divested and we can provide no assurance that such capital will be available or available on terms that are acceptable to us. We cannot assure you that we will be successful in managing these or any other significant risks that we encounter in divesting a business or product line, and any divestiture we undertake could materially and adversely affect our business, financial condition, results of operations and cash flows, and may also result in a diversion of management attention, operational difficulties and losses.

If we fail to comply with environmental requirements, our business, financial condition, operating results and reputation could be adversely affected.

Our products and operations are subject to various federal, state, local and foreign environmental laws and regulations, including those governing the use, storage, handling, exposure to, and disposal of hazardous materials and a large and growing body of international standards which govern the design, manufacture, materials content and sourcing, testing, certification, packaging, installation, use and disposal of our products. We must continually keep abreast of these standards and requirements and integrate compliance to these with the development and regulatory documentation for our products. Failure to meet these standards could limit the ability to market our products in those regions which require compliance with such standards or subject us to fines and penalties. Examples of such standards include laws governing the hazardous material content of our devices and products, such as the EU Directive 2015/863 which is known as “RoHS 3” and that relates to Restrictions on the Use of Certain Hazardous Substances and the EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment. Similar laws and regulations have been passed or are pending in several other jurisdictions and may be enacted in other regions, including in the United States, and we are, or may in the future be, subject to these laws and regulations.

Our failure to comply with past, present and future similar laws could result in reduced sales of our devices and products, inventory write-offs, reputational damage, penalties and other sanctions, any of which could harm our business and financial condition. We also expect that our devices and products will be affected by new environmental laws and regulations on an ongoing basis. New environmental laws and regulations will likely result in additional costs and may increase penalties associated with violations or require us to change the content of our devices and products or how they are manufactured, which could have a material adverse effect on our business, operating results and financial condition.

Risks Relating to Ownership of Our Common Stock

Our stock price has been and may continue to be volatile and an investment in our common stock could suffer a decline in value.

The trading price of our common stock has been subject to wide fluctuations in response to a variety of factors, some of which are beyond our control, including changes in foreign currency exchange rates, quarterly variations in our operating

32

results, announcements by us or our competitors of new products or of significant clinical achievements, changes in market valuations of other similar companies in our industry and general market conditions. During the fourth quarter of fiscal year 2020, the trading price of our common stock fluctuated from a low of $1.62 per share to a high of $2.91 per share. During the fiscal year 2020, the trading price of our common stock fluctuated from a low of $1.40 per share to a high of $3.64 per share. On March 10, 2021, our stock price closed at $7.30 per share. There can be no assurance that our common stock trading price will not suffer declines. Our common stock may experience an imbalance between supply and demand resulting from low trading volumes and therefore broad market fluctuations could have a significant impact on the market price of our common stock regardless of our performance.

Because we do not intend to pay dividends, stockholders will benefit from an investment in our common stock only if it appreciates in value.

We expect to retain any earnings for use to further develop our business, and do not expect to declare cash dividends on our common stock in the foreseeable future. The declaration and payment of any such dividends in the future depends upon our earnings, financial condition, capital needs and other factors deemed relevant by the board of directors, and may be restricted by future agreements with lenders. As a result, the success of an investment in our common stock will depend entirely upon any future appreciation. There is no guarantee that our common stock will appreciate in value or even maintain the price at which stockholders have purchased their shares.

If securities or industry analysts do not continue to publish research or publish incorrect or unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us, our market and our competitors. If no or few securities or industry analysts cover our company, the trading price for our stock could be negatively impacted. If one or more of the analysts who covers us downgrades our stock or publishes incorrect or unfavorable research about our business, our stock price could decline. If one or more of these analysts ceases coverage of our company or fails to publish reports on us regularly, demand for our stock could decrease, which could cause our stock price or trading volume to decline.

Ownership of our common stock is concentrated among a few investors, which may affect the ability of a third party to acquire control of us. Substantial sales by such investors could cause our stock price to decline.

Our directors, executive officers, current five percent or greater stockholders and affiliated entities together beneficially own a significant portion of our common stock outstanding. Having such a concentration of ownership may have the effect of making it more difficult for a third party to acquire, or of discouraging a third party from seeking to acquire, a majority of our outstanding common stock or control of our board of directors through a proxy solicitation.

As a public company, we are obligated to develop and maintain proper and effective internal control over financial reporting. We may not complete our analysis of our internal control over financial reporting in a timely manner, or these internal controls may not be determined to be effective, which may adversely affect investor confidence in our company and, as a result, the value of our common stock.

We are required, pursuant to Section 404 of the Sarbanes-Oxley Act, to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting. This assessment must include disclosure of any material weaknesses identified by our management in our internal control over financial reporting. We may experience difficulty in meeting these reporting requirements in a timely manner, particularly if material weaknesses or significant deficiencies were to persist. Our independent registered public accounting firm will not be required to formally attest to the effectiveness of our internal control over financial reporting pursuant to Section 404 while we are a “smaller reporting company” as defined in the Exchange Act. If we are unable to comply with the requirements of Section 404 in a timely manner, the market price of our stock could decline and we could be subject to sanctions or investigations by the Nasdaq Stock Market, the SEC or other regulatory authorities, which could require additional financial and management resources.

Any failure to develop or maintain effective controls, or any difficulties encountered in their implementation or improvement, could harm our operating results or cause us to fail to meet our reporting obligations. Any failure to implement and maintain effective internal controls also could adversely affect the results of periodic management evaluations regarding the effectiveness of our internal control over financial reporting. Ineffective disclosure controls and procedures or internal control over financial reporting could also cause investors to lose confidence in our reported financial and other information, which could likely have a negative effect on the trading price of our common stock.

Implementing any appropriate changes to our internal controls may require specific compliance training of our directors, officers and employees, entail substantial costs in order to modify our existing accounting systems, and take a significant period of time to complete. Such changes may not, however, be effective in maintaining the adequacy of our internal controls, and any failure to maintain that adequacy, or consequent inability to produce accurate financial statements on a timely basis, could increase our operating costs and could materially impair our ability to operate our business. In the event that we are not able to demonstrate compliance with Section 404 of the Sarbanes-Oxley Act in a timely manner, that

33

our internal controls are perceived as inadequate or that we are unable to produce timely or accurate financial statements, investors may lose confidence in our operating results and our stock price could decline.

Our charter documents, anti-takeover provisions of Delaware law, and contractual provisions could delay or prevent an acquisition or sale of our company.

Our certificate of incorporation empowers the board of directors to establish and issue a class of preferred stock, and to determine the rights, preferences and privileges of the preferred stock. These provisions give the board of directors the ability to deter, discourage or make more difficult a change in control of our company, even if such a change in control could be deemed in the interest of our stockholders or if such a change in control would provide our stockholders with a substantial premium for their shares over the then-prevailing market price for the common stock. Our certificate of incorporation and bylaws contain other provisions that could have an anti-takeover effect, including the following:

In addition, we are generally subject to the anti-takeover provisions of Section 203 of the Delaware General Corporation Law, which regulates corporate acquisitions. These provisions could discourage potential acquisition proposals and could delay or prevent a change in control transaction. They could also have the effect of discouraging others from making tender offers for our common stock or prevent changes in our management.

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

We lease a 37,166 square feet facility in Mountain View, California pursuant to a lease that is scheduled to expire in February 2022.

This facility is being substantially utilized for all of our manufacturing, research and development efforts and also serves as our corporate headquarters. Management believes that these facilities are adequate for our current needs and that suitable additional space or an alternative space would be available as needed in the future on commercially reasonable terms.

Item 3. Legal Proceedings

From time to time, we may be involved in legal proceedings arising in the ordinary course of business. Although the results of litigation and claims cannot be predicted with certainty, we currently believe that the final outcome of these ordinary course matters will not have a material adverse effect on our business, operating results, financial condition or cash flows. Regardless of the outcome, litigation can have an adverse impact on us because of defense and settlement costs, diversion of management resources and other factors. We are not currently party to any material legal proceedings.

Item 4. Mine Safety Disclosures

Not applicable.

34

PART II

Item 5. Market for Registrant’s Common Equity and Related Stockholder Matters, and Issuer Purchases of Equity Securities

Market Information for Common Equity

Our common stock is currently quoted on the Nasdaq Global Market under the symbol “IRIX”.

As of March 15, 2021, there were approximately 33 holders of record (not in street name) of our common stock. Because many of our shares of common stock are held by brokers and other institutions on behalf of our stockholders, we are unable to estimate the total number of stockholders represented by these record holders.

Dividend Policy

We have never paid cash dividends on our common stock. We currently intend to retain any earnings for use in our business and do not anticipate paying cash dividends in the foreseeable future.

Sales of Unregistered Securities

None.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

Not applicable.

Item 6. Selected Financial Data

As a “smaller reporting company,” as defined in Rule 12b-2 of the Exchange Act, we are not required to provide the information called for by this Item.

35

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Overview

IRIDEX Corporation is an ophthalmic medical technology company focused on the development and commercialization of breakthrough products and procedures used to treat sight-threatening eye conditions, including glaucoma and retinal diseases. Certain of our laser products are powered by our proprietary MicroPulse technology, which is a method of delivering laser energy using a mode which chops the continuous wave laser beam into short, microsecond-long laser pulses. Our products consist of laser consoles, delivery devices and consumable instrumentation, including laser probes.

Our laser consoles consist of the following product lines:

Our business generates recurring revenues through sales of consumable products, predominantly single-use laser probe devices and other instrumentation, as well as repair, servicing and extended service contracts for our laser systems. Our laser probes consist of the following product lines:

Ophthalmologists typically use our laser systems in hospital ORs and ambulatory surgical centers (“ASCs”), as well as their offices and clinics. In ORs and ASCs, ophthalmologists use our laser systems with either an indirect laser ophthalmoscope or a consumable, single use MicroPulse P3 Probe, G-Probe, G-Probe Illuminate or EndoProbe.

In 2020 and 2019, our products were sold in the United States and Germany predominantly through a direct sales force and internationally (aside from Germany) primarily through independent distributors. Total revenues in 2020 and 2019 were $36.3 million and $43.4 million, respectively. We generated net losses of $6.3 million and $8.8 million in 2020 and 2019, respectively.

Cost of revenues consists primarily of the cost of components and sub-systems, assembling, packaging, shipping and testing components at our facility, direct labor and associated overhead, warranty, royalty and amortization of intangible assets and depot service costs.

Research and development expenses consist primarily of personnel costs, materials to support new product development and research support provided to clinicians at medical institutions developing new applications which utilize our products and regulatory expenses. Research and development costs have been expensed as incurred.

Sales and marketing expenses consist primarily of costs of personnel, sales commissions, travel expenses, advertising and promotional expenses.

General and administrative expenses consist primarily of costs of personnel, legal, accounting and other public company costs, insurance and other expenses not allocated to other departments.

Impact of COVID-19 to our Business

The outbreak of the COVID-19 has been declared a pandemic by the World Health Organization and continues to spread globally. The spread of COVID-19 has caused public health officials to recommend, and governments to enact, precautions to mitigate the spread of the virus, including travel restrictions and bans, extensive social distancing guidelines and issuing a “shelter-in-place” order in many regions of the world. The pandemic and these related responses have caused, and are expected to continue to cause a global slowdown of economic activity (including the decrease in demand for a broad variety of goods and services), disruptions in global supply chains and significant volatility and disruption of financial markets. We have adopted several measures in response to the COVID-19 outbreak including instructing employees to work from home while under shelter-in-place orders, slowing our manufacturing operations, and restricting non-critical business travel by our employees. Furthermore, we cannot be certain that these actions will mitigate some or all of the negative effects of the pandemic on our business. The extent of the negative effects of COVID-19 on our financial condition or results of operations remains uncertain. Any actual effects on our financial condition or results of operations may differ from any estimates reflected in our financial statements, and such effects may not be fully reflected in our financial condition or results of operations until future periods, if at all.

36

The Company has been deemed an essential business and therefore, has continued to operate in a more limited capacity during the pandemic. In April and May 2020, following shelter-in-place orders, the Company operated with limited personnel at our facilities to continue essential operations. In June 2020, we implemented return-to-work phases in conjunction with a social distancing protocol to safely continue essential operations to best meet customer demands in light of the pandemic. We will continue to actively monitor the situation and may take further actions altering our business operations that we determine are in the best interests of our employees, customers, communities, business partners, suppliers, and shareholders, or as required by federal, state, or local authorities.

Our total revenues decreased $7.1 million or 16.3% from $43.4 million in 2019 to $36.3 million in 2020. This decrease was primarily attributed to the decrease in surgical elective procedures using our products, in part caused by limitations on the availability of such procedures and hospitals’ capacities to provide them and delays in capital purchases caused by the general uncertainty in the near term business environment. The extent to which our operations will be impacted by the outbreak will depend largely on future developments, which are highly uncertain and cannot be accurately predicted, including new information which may emerge concerning the severity of the outbreak and actions by government authorities, hospitals and private businesses to contain the outbreak or recover from its impact, among other things. Due to the nature of our business, the availability of elective surgical procedures and customers’ ability to make capital purchases directly impacts our revenue and operations. We are actively monitoring the ongoing impact of the COVID-19 pandemic and its impact on elective surgical procedures throughout the U.S.

We expect our results of operations to be impacted for so long as the COVID-19 pandemic continues.  

For more information on risks associated with the COVID-19 outbreak, see the section titled “Risk Factors” in Item 1A of Part I.

Results of Operations - 2020 and 2019

Our fiscal year ends on the Saturday closest to December 31. Fiscal 2020 ended on January 2, 2021 and fiscal 2019 ended on December 28, 2019. Fiscal years 2020 and 2019 included 53 weeks and 52 of operations, respectively.

The following table sets forth certain operating data as a percentage of revenue for the periods indicated.

Comparison of 2020 and 2019

Revenues.

37

Our total revenues decreased $7.1 million or 16.3% from $43.4 million in 2019 to $36.3 million in 2020. Our business was impacted by the onset of the COVID-19 pandemic at the beginning of the year with sales of our retina products most impacted. Revenues from G6 products decreased 13.7% with a decrease in both Cyclo G6 systems and probes sales. Revenues from retina products decreased by 20.9% driven by a decrease in both domestic and international sales as capital equipment sales were especially impacted by the pandemic. Other revenues, comprised of service, royalty, freight and legacy G probes, decreased 6.8% due mainly to a decrease in legacy G probes and royalty revenues.

While we believe that demand for our products remains and our revenue will recover, overall capital expenditures within hospitals, surgi-centers and physician offices has been impacted by the general level of uncertainty brought about by COVID-19. Until this stabilizes, we anticipate capital expenditures may continue to be deferred.

Gross Profit.

Gross profit decreased $2.4 million or 13.3% from $17.9 million in 2019 to $15.5 million in 2020. Gross margin increased 1.5% from 41.3% in 2019 to 42.8% in 2020. The increase in gross margin was primarily attributable to favorable geographic and product mix, partially offset by an increase in manufacturing overhead rate as a result of fixed overhead expenditures being absorbed over a lower sales volume.

Gross margins are expected to continue to fluctuate due to changes in the relative proportions of domestic and international sales, the product mix of sales, manufacturing variances, total unit volume changes that lead to greater or lesser production efficiencies, sales return and a variety of other factors.

Research and Development.

R&D expenses decreased $0.4 million or 10.9% from $3.7 million in 2019 to $3.3 million in 2020. The decrease was attributable primarily to a decrease in consulting expenses and a decrease in personnel costs due to reduction in headcount.

Sales and Marketing.

Sales and marketing expenses decreased $2.6 million or 17.6%, from $14.9 million in 2019 to $12.2 million in 2020. The decrease was primarily attributable to a decrease in personnel costs as a result of a reduction in headcount, lower commission expense due to lower sales, lower travel expenses and lower marketing program expenses as a consequence of the COVID-19 pandemic reducing business activity.

General and Administrative.

General and administrative expenses decreased $1.8 million or 21.0% from $8.4 million in 2019 to $6.6 million in 2020. The decrease was primarily attributable to a decrease in personnel costs as a result of a reduction in headcount and lower legal expenses.

Management anticipates operating with the reduction in headcount and consequently lower costs for the foreseeable future as it continues to focus on managing expenses.

Other Income, Net.

Other income, net amounted to $0.3 million in 2020 and $0.2 million in 2019. Other income, net, consisted primarily of interest income or expense, foreign currency gain or loss and the change in expense associated with the re-measurement of contingent liabilities.

Income Taxes.

We recorded a provision for income taxes of $26 thousand for the year ended January 2, 2021 compared to $48 thousand for the year ended December 28, 2019. The effective tax rate for the year ended December 2, 2021 was negative 0.41% compared to an effective tax rate of negative 0.46% for the year ended December 28, 2019. The income tax valuation allowance was $18.8 million at the end of 2020 compared to $17.4 million at the end of 2019.

Liquidity and Capital Resources

Liquidity is our ability to generate sufficient cash flows from operating activities to meet our obligations and commitments. In addition, liquidity includes the ability to obtain appropriate financing or to raise capital.

Comparison of 2020 and 2019

As of January 2, 2021, we had cash and cash equivalents of $11.6 million and working capital of $16.7 million compared to cash and cash equivalents of $12.7 million and working capital of $20.8 million as of December 28, 2019.

Net cash used in operating activities was $3.2 million in 2020 compared to $7.9 million in 2019. The decrease in net cash used in operating activities, expressed in direct cash flow terms, was primarily due to lower vendor payments and lower employee compensation, partially offset by a reduction in cash receipts from customers.

38

During 2020, net cash used in investing activities was $0.1 million, which consisted of capital expenditures. Net cash used in investing activities during 2019 was $0.5 million, which consisted of $0.1 million for capital expenditures and $0.4 million for payment of the contingent earn-out liability.

During 2020, net cash provided by financing activities was $2.5 million, primarily from the proceeds from a U.S. Small Business Association Loan (the “SBA Loan”) pursuant to the Payroll Protection Program (“PPP”) established under the CARES Act. Net cash used in financing activities during 2019 was $0.2 million, which consisted of payroll taxes related to net share settlement of equity awards.

We have historically funded our operations primarily through sales of our products to customers, and through common stock and borrowing arrangements. As of January 2, 2021, our principal sources of liquidity consisted of cash and cash equivalents of $11.6 million. We have incurred net losses over the last several years, and as of January 2, 2021, have an accumulated deficit of approximately $56.9 million. We expect to continue to incur operating losses and negative cash flows from operations at least through January 1, 2022.

We believe our existing cash and cash equivalents will be sufficient to meet our anticipated cash needs over the next 12 months. Our future capital requirements will depend on many factors, including our growth rate, the timing and extent of our spending to support research and development activities, the timing and cost of establishing additional sales and marketing capabilities, the introduction of new and enhanced products and our costs to implement new manufacturing technologies.

Critical Accounting Policies

Revenue Recognition.

Our revenues arise from the sale of laser consoles, delivery devices, consumables, service, and support activities. We also derive revenue from royalties from third parties which are typically based on licensees’ net sales of products that utilize our technology. Our revenue is recognized in accordance with Accounting Standards Codification (“ASC”) 606, “Revenue from Contracts with Customers.”

We have the following revenue transaction types: (1) Product Sale Only, (2) Laser Advantage Program (LAP), (3) Service Contracts, (4) System Repairs (outside of warranty) and (5) Royalty Revenue.

We recognize revenue from product sale at a point in time. When a system or disposables are sold without any additional deliverables, we recognize revenue using the five-step model: (1) identifying the contract with the customer, (2) identifying the performance obligations in the contract, (3) determining expected transaction price, (4) allocating the transaction price to the distinct performance obligations in the contract, and (5) recognizing revenue when (or as) the performance obligations are satisfied.

We recognize revenue from product sales under the LAP program at a point in time. We allocate the transaction price of the distinct performance obligations in the contract by determining stand-alone selling price using historical pricing net of any variable consideration or discounts to specifically allocate to a particular performance obligation.

We recognize revenue from service contracts ratably over the service period. Revenue recognition for the sale of a service contract is largely dependent on the timing of the sale as follows:

39

We recognize revenue from system repairs (outside of warranty) at a point in time. When the customer requests repairs from us subsequent to the expiration of the standard warranty and outside of a service contract, these repair contracts are considered separate from the initial sale, and as such, revenue is recognized as the repair services are rendered and the performance obligation satisfied.

Since these arrangements are for sales-based licenses of intellectual property, for which the guidance in paragraph ASC 606-10-55-65 applies, we recognize revenue only as the subsequent sale occurs. However, we note that such sales being reported by the licensee with a quarter in arrears, such revenue is recognized at the time it is reported and paid by the licensee given that any estimated variable consideration would have to be fully constrained due to the unpredictability of such estimate and the unavoidable risk that it may lead to significant revenue reversals.

We elected the practical expedient allowing it to not recognize as a contract asset the commission paid to its salesforce on the sale of its products as an incremental cost of obtaining a contract with a customer but rather recognize such commission as expense when incurred as the amortization period of the asset that we would have otherwise recognized is one year or less.

Inventories.

Inventories are stated at the lower of cost or net realizable value and include on-hand inventory physically held at our facility, sales demo inventory and service loaner inventory. Cost is determined on a standard cost basis which approximates actual cost on a first-in, first-out (“FIFO”) method. Lower of cost or net realizable value is evaluated by considering obsolescence, excessive levels of inventory, deterioration and other factors. Adjustments to reduce the cost of inventory to its net realizable value, if required, are made for estimated excess, obsolete or impaired inventory and are charged to cost of revenues. Once the cost of the inventory is reduced, a new lower-cost basis for that inventory is established, and subsequent changes in facts and circumstances do not result in the restoration or increase in that newly established cost basis. Factors influencing these adjustments include changes in demand, product life cycle and development plans, component cost trends, product pricing, physical deterioration and quality issues. Revisions to these adjustments would be required if these factors differ from our estimates.

Sales Returns Allowance and Allowance for Doubtful Accounts.

We estimate future product returns related to current period product revenue. We analyze historical returns, and changes in customer demand and acceptance of our products when evaluating the adequacy of the sales returns allowance. Significant management judgment and estimates must be made and used in connection with establishing the sales returns allowance in any accounting period. Material differences may result in the amount and timing of our revenue for any period if management made different judgments or utilized different estimates. Our provision for sales returns is recorded net of the associated costs.

Similarly, management must make estimates regarding the uncollectibility of accounts receivable. We are exposed to credit risk in the event of non-payment by customers to the extent of amounts recorded on the consolidated balance sheets. As sales increase the level of accounts receivable would likely also increase. In addition, in the event that customers were to delay their payments to us, the levels of accounts receivable would likely also increase. We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. The allowance for

40

doubtful accounts is based on past payment history with the customer, analysis of the customer’s current financial condition, the aging of the accounts receivable balance, customer concentration and other known factors.

Warranty.

We provide reserves for the estimated cost of product warranties at the time revenue is recognized based on historical experience of known product failure rates and expected material and labor costs to provide warranty services. We generally provide a two-year warranty on our products. Additionally, from time to time, specific warranty accruals may be made if unforeseen technical problems arise. Alternatively, if estimates are determined to be greater than the actual amounts necessary, we may reverse a portion of such provisions in future periods. Our warranty policy is applicable to products which are considered defective in their performance or fail to meet the product specifications. Warranty costs are reflected in the consolidated statements of operations as cost of revenues.

Income Taxes.

We account for income taxes in accordance with ASC 740, “Income Taxes” (“ASC 740”), which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. Under ASC 740, the liability method is used in accounting for income taxes. Deferred tax assets and liabilities are determined based on the differences between financial reporting and the tax basis of assets and liabilities, and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. ASC 740 also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that some or all of the deferred tax asset will not be realized. We annually evaluate the realizability of our deferred tax assets by assessing our valuation allowance and by adjusting the amount of such allowance, if necessary. The factors used to assess the likelihood of realization include our forecast of future taxable income and available tax planning strategies that could be implemented to realize the net deferred tax assets. As of January 2, 2021, based on our recent history of losses and its forecasted losses, management believes on the more likely than not basis that a full valuation allowance is required. Accordingly, as of January 2, 2021, we provided a full valuation allowance on our federal and state deferred tax assets.

Accounting for Uncertainty in Income Taxes.

We account for uncertain tax positions in accordance with ASC 740. ASC 740 seeks to reduce the diversity in practice associated with certain aspects of measurement and recognition in accounting for income taxes. ASC 740 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax provision that an entity takes or expects to take in a tax return. Additionally, ASC 740 provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosures, and transition. Under ASC 740, an entity may only recognize or continue to recognize tax positions that meet a "more-likely-than-not" threshold. In accordance with our accounting policy, we recognize accrued interest and penalties related to unrecognized tax benefits as a component of income tax expense. There was no accrued interest and penalties during the year ended January 2, 2021.

Accounting for Stock-Based Compensation.

We account for stock-based compensation granted to employees and directors, including employees’ stock option awards and restricted stock units at grant date, based on the fair value of the award. Stock-based compensation is recognized as expense on a ratable basis over the requisite service period of the award.

We value options using the Black-Scholes option pricing model. Time-based restricted stock units are valued at the grant date fair value of the underlying common shares. Performance-based restricted stock units without market conditions are valued at grant date fair value of the underlying common shares. Performance-based RSUs granted with market conditions and performance-based stock options with market conditions are valued using the Monte Carlo simulation model. The Black-Scholes option pricing model requires the use of highly subjective and complex assumptions which determine the fair value of stock-based awards, including the option’s expected term and the price volatility of the underlying stock. The Monte Carlo simulation model incorporates assumptions for the holding period, risk-free interest rate, stock price volatility and dividend yield.

41

Leases.

We determine if an arrangement is a lease at inception. Operating leases are included in Operating lease right-of-use (“ROU”) assets, net and Operating lease liabilities in our consolidated balance sheets. As of January 2, 2021, we were not a party to finance lease arrangements.

ROU assets represent our right to use an underlying asset for the lease term and lease liabilities represent our obligation to make lease payments arising from the lease. Operating lease ROU assets and liabilities are recognized at commencement date based on the present value of lease payments over the lease term. As most of our leases do not provide an implicit rate, we use our incremental borrowing rate based on information available at commencement date in determining the present value of lease payments. We use the implicit rate when readily determinable. The operating lease ROU asset also includes any lease payments made and excludes lease incentives. Our lease terms may include options to extend or terminate the lease when it is reasonably certain that we will exercise that option. Lease expense for lease payments is recognized on a straight-line basis over the lease term.

Under the available practical expedient, we account for the lease and non-lease components as a single lease component.

Recent Accounting Standards Not Yet Adopted.

In December 2019, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2019-12, “Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes” as part of its initiative to reduce complexity in the accounting standards. The standard eliminates certain exceptions related to the approach for intraperiod tax allocation, the methodology for calculating income taxes in an interim period and the recognition of deferred tax liabilities for outside basis differences. The standard also clarifies and simplifies other aspects of the accounting for income taxes. The standard is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020. The Company is currently evaluating the impact that this guidance will have on its financial position and results of operations, if any.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

As a “smaller reporting company,” as defined in Rule 12b-2 of the Exchange Act, we are not required to provide the information called for by this Item.

Item 8. Financial Statements and Supplementary Data.

Our consolidated balance sheets as of January 2, 2021 and December 28, 2019 and the consolidated statements of operations, comprehensive income, stockholders’ equity and cash flows for each of our fiscal years 2020 and 2019 together with the related notes and the report of our independent registered public accounting firm, are on the following pages. Additional required financial information is described in Item 15.

42

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of IRIDEX Corporation

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of IRIDEX Corporation (a Delaware corporation) and its subsidiaries (the “Company”) as of January 2, 2021 and December 28, 2019, and the related consolidated statements of operations, comprehensive loss, stockholders’ equity, and cash flows for each of the two years in the period ended January 2, 2021, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of January 2, 2021 and December 28, 2019, and the results of its operations and its cash flows for each of the two years in the period ended January 2, 2021, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Inventory Valuation - Adjustments for Excess or Obsolete Inventories

As described in Notes 2 and 4 to the consolidated financial statements, the Company has inventories with a carrying value of $5.7 million as of January 2, 2021. The Company’s inventories are stated at the lower of cost or net realizable value. Cost is determined on a standard cost basis which approximates actual cost on a first-in, first-out (“FIFO”) method. Lower of cost or net realizable value is evaluated by considering obsolescence, excessive levels of inventory, deterioration, and other factors. Adjustments to reduce the cost of inventory to its net realizable value, if required, are made for estimated excess, obsolescence or impaired inventory and are charged to cost of revenues.  The Company’s inventories include demonstration units (“demos”) to facilitate the sale of products to prospective customers and loaners for existing customers to use while their product is under repair.

The principal considerations for our determination that performing procedures relating to net realizable value adjustments to inventories is a critical audit matter are the significant amount of judgement by management in developing the assumptions of the forecasted changes in demand, product life cycle and development plans, component cost trends, product pricing, physical deterioration and quality issues, which in turn led to significant auditor judgement, subjectivity, and effort in performing audit procedures and evaluating audit evidence relating to these factors. Additionally, for certain new product launches there may be limited historical data with which to evaluate forecasts.

43

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included obtaining an understanding of the Company’s inventory reserve review process, including the assumptions and data underlying the excess and obsolete inventory valuation. The procedures also included, among others, testing management’s process for developing the estimate of the adjustments for excess or obsolete inventories, testing the completeness and accuracy of the underlying data used in the estimate, and evaluating management’s assumptions of forecasted product demand. Evaluating management’s demand forecast for reasonableness involved considering historical sales by product, comparing prior period estimates to actual results, and determining whether the demand forecast used was consistent with evidence obtained in other areas of the audit.

/s/ BPM LLP

We have served as the Company’s auditor since 2007.

San Jose, California

March 23, 2021

44

IRIDEX Corporation

CONSOLIDATED BALANCE SHEETS

(in thousands, except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements.

45

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)

The accompanying notes are an integral part of these consolidated financial statements.

46

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS

(in thousands)

The accompanying notes are an integral part of these consolidated financial statements.

47

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(in thousands, except share data)

The accompanying notes are an integral part of these consolidated financial statements.

48

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

The accompanying notes are an integral part of these consolidated financial statements.

49

IRIDEX Corporation

Notes to Consolidated Financial Statements

1. Organization

Description of Business.

IRIDEX Corporation (“IRIDEX”, the “Company”, “we”, “us”, or “our”) is a leading worldwide provider of therapeutic based laser systems, delivery devices and consumable instrumentation used to treat sight-threatening eye diseases in ophthalmology. Our ophthalmology products are sold in the United States and Germany predominantly through a direct sales force and internationally (aside from Germany) primarily through independent distributors.

2. Summary of Significant Accounting Policies

Financial Statement Presentation.

The consolidated financial statements include the accounts of IRIDEX and our wholly owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in consolidation.

Our fiscal year always ends on the Saturday closest to December 31. Fiscal 2020 ended on January 2, 2021 (“FY 2020”) and Fiscal 2019 ended on December 28, 2019 (“FY 2019”). Fiscal years 2020 and 2019 included 53 weeks and 52 weeks of operations, respectively.

Use of Estimates.

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”) requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, and expenses and the related disclosure of contingent assets and liabilities. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates. In addition, any change in these estimates or their related assumptions could have an adverse effect on our operating results.

Cash and Cash Equivalents.

We consider all highly liquid debt instruments with insignificant interest rate risk and an original maturity of three months or less when purchased to be cash equivalents. Our cash equivalents consist primarily of cash deposits in money market funds that are available for withdrawal without restriction.

Sales Returns Allowance and Allowance for Doubtful Accounts.

When determining the transaction price, we estimate the variable consideration as the most likely amount to which we expect to be entitled, and we include the estimated amounts in the transaction price to the extent it is probable that a significant reversal of cumulative revenue will not occur when the uncertainty associated with the variable consideration is resolved. Material differences may result in the amount and timing of our revenue for any period if management made different judgments or utilized different estimates. Our provision for sales returns is recorded net of the associated costs. There was no provision for sales returns as of January 2, 2021 and $264 thousand as of December 28, 2019, which was recorded within the deferred revenue accounts in the consolidated balance sheets.

Similarly management must make estimates regarding the uncollectibility of accounts receivable. We are exposed to credit risk in the event of non-payment by customers to the extent of amounts recorded on the consolidated balance sheets. As sales levels change, the level of accounts receivable would likely also change. In addition, in the event that customers were to delay their payments to us, the levels of accounts receivable would likely increase. We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. The allowance for doubtful accounts is based on past payment history with the customer, analysis of the customer’s current financial condition, the aging of the accounts receivable balance, customer concentration and other known factors.

50

A reconciliation of the changes in our allowance for doubtful accounts balances for the years ended January 2, 2021 and December 28, 2019 are as follows (in thousands):

Inventories.

Inventories are stated at the lower of cost or net realizable value and include on-hand inventory physically held at our facility, sales demo inventory and service loaner inventory. Cost is determined on a standard cost basis which approximates actual cost on a first-in, first-out (“FIFO”) method. Lower of cost or net realizable value is evaluated by considering obsolescence, excessive levels of inventory, deterioration and other factors. Adjustments to reduce the cost of inventory to its net realizable value, if required, are made for estimated excess, obsolescence or impaired inventory and are charged to cost of revenues. Once the cost of the inventory is reduced, a new lower-cost basis for that inventory is established, and subsequent changes in facts and circumstances do not result in the restoration or increase in that newly established cost basis. Factors influencing these adjustments include changes in demand, product life cycle and development plans, component cost trends, product pricing, physical deterioration and quality issues. Revisions to these adjustments would be required if these factors differ from our estimates.

As part of our normal business, we generally utilize various finished goods inventory as either sales demos to facilitate the sale of our products to prospective customers, or as loaners that we allow our existing customers to use while we repair their products. We are amortizing these demos and loaners over an estimated useful life of four years. The amortization of the demos is charged to sales and marketing expense while the amortization on the loaners is charged to cost of revenues. The gross value of demos and loaners was $1.9 million and $2.8 million and the accumulated amortization was $1.7 million and $1.4 million as of January 2, 2021 and December 28, 2019, respectively. The net book value of demos and loaners is charged to cost of revenues when such demos or loaners are sold.

Property and Equipment.

Property and equipment are stated at cost less accumulated depreciation and amortization. Depreciation and amortization are calculated on a straight–line basis over the estimated useful lives of the assets, which is generally three years. Leasehold improvements are amortized over the lesser of their estimated useful lives or the lease term. Repairs and maintenance costs are expensed as incurred.

Leases.

We determine if an arrangement is a lease at inception. Operating leases are included in Operating lease right-of-use (“ROU”) assets, net and Operating lease liabilities in our consolidated balance sheets. As of January 2, 2021, the Company was not a party to finance lease arrangements.

ROU assets represent our right to use an underlying asset for the lease term and lease liabilities represent our obligation to make lease payments arising from the lease. Operating lease ROU assets and liabilities are recognized at commencement date based on the present value of lease payments over the lease term. As most of our leases do not provide an implicit rate, we use our incremental borrowing rate based on information available at commencement date in determining the present value of lease payments. We use the implicit rate when readily determinable. The operating lease ROU asset also includes any lease payments made and excludes lease incentives. Our lease terms may include options to extend or terminate the lease when it is reasonably certain that we will exercise that option. Lease expense for lease payments is recognized on a straight-line basis over the lease term.

Under the available practical expedient, we account for the lease and non-lease components as a single lease component.

51

Valuation of Goodwill and Intangible Assets.

Goodwill represents the excess of the purchase price over the fair value of the net tangible and identifiable intangible assets acquired in a business combination. The Company reviews goodwill for impairment on an annual basis or whenever events or changes in circumstances indicate the carrying value may not be recoverable. The Company performs an annual impairment test by comparing the fair value of a reporting unit with its carrying amount. An impairment charge should be recognized for the amount by which the carrying amount exceeds the reporting unit’s fair value; however, the loss recognized should not exceed the total amount of goodwill allocated to that reporting unit. In addition, income tax effects from any tax deductible goodwill carrying amount of the reporting unit should be considered when measuring the goodwill impairment loss, if applicable. The Company has determined that it has a single reporting unit for purposes of performing its goodwill impairment test. As the Company uses the market approach to assess impairment, its common stock price is an important component of the fair value calculation. If the Company’s stock price continues to experience significant price and volume fluctuations, this will impact the fair value of the reporting unit and can lead to potential impairment in future periods. The Company performed its annual impairment test during the second quarter of fiscal 2020 and determined that its goodwill was not impaired. As of January 2, 2021, we had not identified any factors that indicated there was an impairment of our goodwill and determined that no additional impairment analysis was then required.

Intangible assets with definite lives are amortized over the useful life of the asset. We review our amortizing intangible assets for impairment whenever events or changes in circumstances indicate that their carrying value may not be recoverable. An asset is considered impaired if its carrying amount exceeds the future non-discounted net cash flow the asset is expected to generate. If an asset is considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset exceeds its fair value. In such circumstances, we conduct an impairment analysis in accordance with Accounting Standards Codification (“ASC”) 350, “Intangibles – Goodwill and Other” (“ASC 350”).

Revenue Recognition.

Our revenues arise from the sale of laser consoles, delivery devices, consumables, service, and support activities. We also derive revenue from royalties from third parties which are typically based on licensees’ net sales of products that utilize our technology. Our revenue is recognized in accordance with ASC 606, “Revenue from Contracts with Customers.”

The Company has the following revenue transaction types: (1) Product Sale Only, (2) Laser Advantage Program (LAP), (3) Service Contracts, (4) System Repairs (outside of warranty) and (5) Royalty Revenue.

The Company recognizes revenue from product sale at a point in time. When a system or disposables are sold without any additional deliverables, the Company recognizes revenue using the five-step model: (1) identifying the contract with the customer, (2) identifying the performance obligations in the contract, (3) determining expected transaction price, (4) allocating the transaction price to the distinct performance obligations in the contract, and (5) recognizing revenue when (or as) the performance obligations are satisfied.

The Company recognizes revenue from product sales under the LAP program at a point in time. The Company allocates the transaction price of the distinct performance obligations in the contract by determining stand-alone selling price using historical pricing net of any variable consideration or discounts to specifically allocate to a particular performance obligation.

52

The Company recognizes revenue from service contracts ratably over the service period. Revenue recognition for the sale of a service contract is largely dependent on the timing of the sale as follows:

The Company recognizes revenue from system repairs (outside of warranty) at a point in time. When the customer requests repairs from the Company subsequent to the expiration of the standard warranty and outside of a service contract, these repair contracts are considered separate from the initial sale, and as such, revenue is recognized as the repair services are rendered and the performance obligation satisfied.

Since these arrangements are for sales-based licenses of intellectual property, for which the guidance in paragraph ASC 606-10-55-65 applies, the Company recognizes revenue only as the subsequent sale occurs. However, the Company notes that such sales being reported by the licensee with a quarter in arrear, such revenue is recognized at the time it is reported and paid by the licensee given that any estimated variable consideration would have to be fully constrained due to the unpredictability of such estimate and the unavoidable risk that it may lead to significant revenue reversals.

The Company elected the practical expedient allowing it to not recognize as a contract asset the commission paid to its salesforce on the sale of its products as an incremental cost of obtaining a contract with a customer but rather recognize such commission as expense when incurred as the amortization period of the asset that the Company would have otherwise recognized is one year or less.

Taxes Collected from Customers and Remitted to Governmental Authorities.

Taxes collected from customers and remitted to governmental authorities are recognized on a net basis in the accompanying consolidated statements of operations as well as accrued expenses to the degree which is appropriate.

Deferred Revenue.

Deferred revenue represents contract liabilities. Revenue related to extended service contracts is deferred and recognized on a straight-line basis over the period of the applicable service period. Costs associated with these service arrangements are recognized as incurred.

A reconciliation of the changes in our deferred revenue balances for the years ended January 2, 2021 and December 28, 2019 are as follows (in thousands):

53

During each of the twelve months ended January 2, 2021 and December 28, 2019, approximately $1.3 million was recognized pertaining to amounts deferred as of both December 28, 2019 and December 29, 2018.

Warranty.

We provide reserves for the estimated cost of product warranties at the time revenue is recognized based on historical experience of known product failure rates and expected material and labor costs to provide warranty services. We generally provide a two-year warranty on our products. The Company’s warranty policy is applicable to products which are considered defective in their performance or fail to meet the product specifications. Additionally, from time to time, specific warranty accruals may be made if unforeseen technical problems arise. If estimates are determined to be greater than the actual amounts necessary, we may reverse a portion of such provisions in future periods. Warranty costs are reflected in the consolidated statements of operations as costs of revenues.

A reconciliation of the changes in our warranty liability for the years ended January 2, 2021 and December 28, 2019 are as follows (in thousands):

Shipping and Handling Costs.

Our shipping and handling costs billed to customers are included in revenues and the associated expense is recorded in cost of revenues for all periods presented. Shipping and handling costs billed to customers amounted to $0.2 million during each of fiscal years 2020 and 2019.

Research and Development.

Research and development expenditures are charged to operations as incurred.

Advertising.

Advertising and promotion costs are expensed as they are incurred; such costs were approximately $0.1 million in 2020 and $0.3 million in 2019 and are included in sales and marketing expenses in the accompanying consolidated statements of operations.

Income Taxes.

We account for income taxes in accordance with ASC 740, “Income Taxes” (“ASC 740”), which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. Under ASC 740, the liability method is used in accounting for income taxes. Deferred tax assets and liabilities are determined based on the differences between financial reporting and the tax basis of assets and liabilities, and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. ASC 740 also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that some or all of the deferred tax asset will not be realized. We annually evaluate the realizability of our deferred tax assets by assessing our valuation allowance and by adjusting the amount of such allowance, if necessary. The factors used to assess the likelihood of realization include our forecast of future taxable income and available tax planning strategies that could be implemented to realize the net deferred tax assets. As of January 2, 2021, based on the Company's recent history of losses and its forecasted losses, management believes on the more likely than not basis that a full valuation allowance is required. Accordingly, as of January 2, 2021, the Company provided a full valuation allowance on its federal and states deferred tax assets.

54

Accounting for Uncertainty in Income Taxes.

We account for uncertain tax positions in accordance with ASC 740. ASC 740 seeks to reduce the diversity in practice associated with certain aspects of measurement and recognition in accounting for income taxes. ASC 740 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax provision that an entity takes or expects to take in a tax return. Additionally, ASC 740 provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosures, and transition. Under ASC 740, an entity may only recognize or continue to recognize tax positions that meet a "more-likely-than-not" threshold. In accordance with our accounting policy, we recognize accrued interest and penalties related to unrecognized tax benefits as a component of income tax expense. There were no accrued interest and penalties during the years ended January 2, 2021 and December 28, 2019.

Accounting for Stock-Based Compensation.

We account for stock-based compensation granted to employees and directors, including employees stock option awards and restricted stock units in accordance with ASC 718, “Compensation – Stock Compensation” (“ASC 718”). Accordingly, stock-based compensation cost is measured at grant date, based on the fair value of the award. Stock-based compensation is recognized as expense on a ratable basis over the requisite service period of the award.

We value options using the Black-Scholes option pricing model. Time-based restricted stock units are valued at the grant date fair value of the underlying common shares. Performance-based restricted stock units without market conditions are valued at grant date fair value of the underlying common shares. Performance-based RSUs granted with market conditions and performance-based stock options with market conditions are valued using the Monte Carlo simulation model. The Black-Scholes option pricing model requires the use of highly subjective and complex assumptions which determine the fair value of stock-based awards, including the option’s expected term and the price volatility of the underlying stock. The Monte Carlo simulation model incorporates assumptions for the holding period, risk-free interest rate, stock price volatility and dividend yield.

Concentration of Credit Risk and Other Risks and Uncertainties.

Our cash and cash equivalents are deposited in demand and money market accounts. Deposits held with banks may exceed the amount of insurance provided on such deposits. Generally, these deposits may be redeemed upon demand and therefore, bear minimal risk.

We market our products to distributors and end-users throughout the world. Sales to international distributors are generally made on open credit terms and letters of credit. Management performs ongoing credit evaluations of our customers and maintains an allowance for potential credit losses. Historically, we have not experienced any significant losses related to individual customers or a group of customers in any particular geographic area. For the years ended January 2, 2021 and December 28, 2019, no single customer accounted for greater than 10% of total revenues. As of January 2, 2021, one customer accounted for over 10% of our accounts receivable, representing 13%. As of December 28, 2019, one customer accounted for more than 10% of accounts receivable balance, representing 11%.

Our products require approvals from the Food and Drug Administration and international regulatory agencies prior to commercialized sales. Our future products may not receive required approvals. If we were denied such approvals, or if such approvals were delayed, it would have a material adverse impact on our business, results of operations and financial condition.

Reliance on Certain Suppliers.

Certain components and services used to manufacture and develop our products are presently available from only one or a limited number of suppliers or vendors. The loss of any of these suppliers or vendors would potentially require a significant level of hardware and/or software development efforts to incorporate the products or services into our products.

Net Income (Loss) per Share.

Basic net income (loss) per share is based upon the weighted average number of common shares outstanding during the period. Diluted net income per share is based upon the weighted average number of common shares outstanding and dilutive common stock equivalents outstanding during the period. Common stock equivalents consist of incremental common shares issuable upon the exercise of stock options and release (vesting) of restricted stock units and awards and are calculated under the treasury stock method. Common stock equivalent shares from unexercised stock options and unvested restricted stock units are excluded from the computation for periods in which we incur a net loss or if the exercise price of such options is greater than the average market price of our common stock for the period as their effect would be anti-dilutive. See Note 16 - Computation of Basic and Diluted Net Loss Per Common Share.

55

Reclassifications

Certain reclassifications have been made to the prior year consolidated financial statements included in these consolidated financial statements to conform to the current year presentation. The reclassifications had no impact on previously reported net loss, accumulated deficit, total assets, or total liabilities.

Recent Accounting Standards Not Yet Adopted.

In December 2019, the FASB issued ASU 2019-12, “Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes” as part of its initiative to reduce complexity in the accounting standards. The standard eliminates certain exceptions related to the approach for intraperiod tax allocation, the methodology for calculating income taxes in an interim period and the recognition of deferred tax liabilities for outside basis differences. The standard also clarifies and simplifies other aspects of the accounting for income taxes. The standard is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020. Early adoption is permitted. The Company is currently evaluating the impact that this guidance will have on its financial position and results of operations, if any.

3. Fair Value Measurement

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The fair value hierarchy distinguishes between (1) market participant assumptions developed based on market data obtained from independent sources (observable inputs) and (2) an entity’s own assumptions about market participant assumptions developed based on the best information available in the circumstances (unobservable inputs). The fair value hierarchy consists of three broad levels, which gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (Level 1) and the lowest priority to unobservable inputs (Level 3). The three levels of the fair value hierarchy are described below:

In determining fair value, we utilize valuation techniques that maximize the use of observable inputs and minimize the use of unobservable inputs to the extent possible as well as considers counterparty credit risk in our assessment of fair value.

The carrying amounts of our financial assets and liabilities, including cash and cash equivalents, accounts receivable, accounts payable, and accrued expenses as of January 2, 2021 and December 28, 2019, approximate fair value because of the short maturity of these instruments. The carrying amount of the Company’s PPP loan as of January 2, 2021, approximates its fair value based on the specified interest rate.

As of January 2, 2021 and December 28, 2019, financial assets and liabilities measured and recognized at fair value on a recurring basis and classified under the appropriate level of the fair value hierarchy as described above was as follows (in thousands):

The Company’s Level 1 financial assets are money market funds whose fair values are based on quoted market prices. The Company does not have any Level 2 and Level 3 financial assets or liabilities.  

56

4. Inventories

The components of our inventories are as follows (in thousands):

5. Property and Equipment

The components of our property and equipment are as follows (in thousands):