MARINE PRODUCTS CORP - Annual Report: 2021 (Form 10-K)

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

​

FOR THE FISCAL YEAR ENDED DECEMBER 31, 2021

Commission File No. 1-16263

MARINE PRODUCTS CORPORATION

(Exact name of registrant as specified in its charter)

​

2801 BUFORD HIGHWAY NE, SUITE 300

ATLANTA, GEORGIA 30329

(404) 321-7910

(Address of principal executive offices and registrant’s telephone number)

Securities registered pursuant to Section 12(b) of the Act:

​

Securities registered pursuant to section 12(g) of the Act: NONE

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ◻ Yes ☒ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ◻ Yes ☒ No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ⌧ Yes ◻ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ⌧ Yes ◻ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer ◻     Accelerated filer ☒     Non-accelerated filer ◻     Smaller reporting company ☐      Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of Marine Products Corporation common stock held by non-affiliates on June 30, 2021, the last business day of the registrant’s most recent second fiscal quarter, was $141,635,984 based on the closing price on the New York Stock Exchange on June 30, 2021 of $15.44 per share.

Marine Products Corporation had 34,147,179 shares of common stock outstanding as of February 18, 2022.

Documents Incorporated by Reference

Portions of the Proxy Statement for the 2022 Annual Meeting of Stockholders of Marine Products Corporation are incorporated by reference into Part III, Items 10 through 14 of this report.

​

​

​

​

PART I

References in this document to “we,” “our,” “us,” “Marine Products,” or “the Company” mean Marine Products Corporation (“MPC”) and its subsidiaries, Chaparral Boats, Inc. (“Chaparral”) and Robalo Boats, LLC (“Robalo”), collectively or individually, except where the context indicates otherwise.

Forward-Looking Statements

Certain statements made in this report that are not historical facts are “forward-looking statements” under the Private Securities Litigation Reform Act of 1995. Such forward-looking statements may include, without limitation, statement regarding the Company’s belief that it will remain a leading manufacturer of recreational powerboats for sale to a broad range of consumers worldwide; that Chaparral will continue to expand the range of its offerings through insightful, innovative product design and quality manufacturing processes to reach an increasingly discerning recreational boating market; there are several alternative suppliers of engines, resins and fiberglass that could provide adequate quality and quantities of these significant cost components at acceptable prices; the Company’s plans to continue purchasing sterndrive engines through the American Boatbuilders Association (“ABA”); the Company’s belief that its allocation of production among its dealers will continue during 2022 and its belief that it will be able to resell any boat for which an order has been cancelled; the Company’s belief that dealer inventories of its boat models are insufficient to meet the current level of retail customer demand; the Company’s plans to incorporate the bow design on other Chaparral models; the Company’s belief that its strong market share is primarily due to the success of its larger SSX models and the Surf Series; the Company’s belief that increases in the cost of certain components, international tariffs, operating costs, and the impact of environmental regulation have increased the cost of boats and boat ownership in recent years and that these trends may continue; the Company’s belief that it is well positioned to take advantage of industry conditions; the Company’s belief that its membership in the ABA positions itself as a significant third-party customer of major suppliers of sterndrive engines; the Company’s plans to continue seeking the most advantageous purchasing arrangements from its suppliers; the Company’s marketing strategy will enable the Company to expand its presence by building dedicated sales, marketing and distribution systems; the Company’s plans to increase selectively the quantity of its dealers to improve the quality and effectiveness of its dealer network; the Company’s plans to capitalize on its strong dealer network by educating its dealers on the sales and servicing of its products and helping them provide more comprehensive customer service, with the goal of increasing customer satisfaction, customer retention and future sales; the Company’s belief that the nationally advertised fixed retail pricing gives the consumer confidence that they are getting the best possible price resulting in higher customer satisfaction and encouraging consistent pricing across the Company’s dealer network; the Company’s belief that it is leading the way with marketing and branding that consistently presents a luxury-oriented message and integrates the customer into the boater’s entire experience; the Company’s plans to consider making strategic acquisitions; the Company’s belief that its corporate infrastructure, marketing and sales capabilities, financial strength and nationwide presence enables it to compete effectively against its competitors; the Company’s belief that its facilities comply in all material aspects with the regulations of the EPA and OSHA; the Company’s belief that it will not incur any material expenditures to comply with existing environmental or safety regulations; the Company’s belief that its health care program improves employee well-being by facilitating access to healthcare; the Company’s belief that, except for the Chaparral and Robalo trademarks, it is not dependent upon any single trademark or trade name or group of trademarks or trade names; the Company’s belief that quarterly operating results for the second quarter traditionally record the highest sales volume for the year because this corresponds with the highest retail sales volume period; the Company’s belief that price increases will allow the Company to maintain or improve its profit margins and that these price increases will have no immediate impact on consumer demand; the Company’s belief that while the recent increase in inflation and the Federal Reserve’s announcement that it will act to raise interest rates creates a risk to retail demand for recreational boats, such factors are currently not expected to impact production and sales; the Company’s belief that it maintains all requisite licenses and permits and is in compliance with all applicable federal, state and local regulations; the Company’s belief that the ultimate outcome of any litigation will not have a material effect on its liquidity, financial condition or results of operations; the Company’s plans to continue to monitor retail demand, the actions of its competitors, dealer inventory levels and the availability of dealer and consumer financing for the purchase of its products and to adjust its production levels as deemed appropriate; the Company’s plans to continue to monitor its market share, but to continue to prioritize profit maximization; the Company’s belief that strong retail demand for new recreational boats will continue during 2022 and the Company’s belief that recreational boating’s appeal to U.S. consumers has grown because people perceive it to be a safe outdoor activity; the Company’s plans to continue to develop additional new products for subsequent model years; the Company’s efforts to concentrate on production scheduling in a way that will minimize inventory levels to the extent possible; the Company’s expectation that capital expenditures during 2022 will be approximately $3.5 million; the Company’s belief that its liquidity provided by its existing cash and cash equivalents, marketable securities, and cash expected to be generated from operations, will provide sufficient capital to meet the Company’s requirements for at least the next twelve months; the Company’s

2

​

expectation that it does not plan to make any contributions to its Retirement Income Plan in 2022; the Company’s estimate of the amount and timing of future contractual obligations; the Company’s judgments and estimates with respect to its critical accounting policies and estimates; the Company’s expectation about the impact of new accounting pronouncements on the Company’s consolidated financial statements; and the Company’s expectation regarding market risk of its investment portfolio.

The words “may,” “should,” “will,” “expect,” “believe,” “anticipate,” “intend,” “plan,” “seek,” “project,” “estimate,” and similar expressions used in this document that do not relate to historical facts are intended to identify forward-looking statements. Such statements are based on certain assumptions and analyses made by our management in light of its experience and its perception of historical trends, current conditions, expected future developments and other factors it believes to be appropriate. We caution you that such statements are only predictions and not guarantees of future performance and that actual results, developments and business decisions may differ from those envisioned by the forward-looking statements. Risk factors that could cause such future events not to occur as expected include the following: economic conditions, availability of credit and possible decreases in the level of consumer confidence impacting discretionary spending, business interruptions due to adverse weather conditions, increased interest rates, unanticipated changes in consumer demand and preferences, deterioration in the quality of Marine Products’ network of independent boat dealers or availability of financing of their inventory, our ability to insulate financial results against increasing commodity prices, the impact of disruptions in current supplier relationships, our ability to purchase construction materials in sufficient quantities and quality, our ability to identify, complete or successfully integrate acquisitions or strategic alliances, competition from other boat manufacturers and dealers, our potential liability for personal injury and property damage claims, our ability to comply with environmental and other regulatory requirements, our dependence on our key personnel and the loss or interruption of the services of such personnel, risks related to cyber-attacks or other threats, as our operations are dependent on digital technologies and services. We caution you that such statements are only predictions and not guarantees of future performance and that actual results, developments and business decisions may differ from those envisioned by the forward-looking statements. See “Risk Factors” on page 14 for a discussion of factors that may cause actual results to differ from our projections.

Item 1. Business

Marine Products manufactures fiberglass motorized boats distributed and marketed through its independent dealer network. Marine Products’ product offerings include Chaparral sterndrive and outboard pleasure boats and Robalo outboard sport fishing boats.

Organization and Overview

Marine Products is a Delaware corporation incorporated on August 31, 2000, in connection with a spin-off from RPC, Inc. (NYSE: RES) (“RPC”). Effective February 28, 2001, RPC accomplished the spin-off by contributing 100 percent of the issued and outstanding stock of Chaparral to Marine Products, a newly formed, wholly owned subsidiary of RPC, and then distributing the common stock of Marine Products to RPC stockholders.

Marine Products designs, manufactures and sells recreational fiberglass powerboats in the sportboat, sport fishing and jet boat markets. The Company sells its products to a network of 206 domestic and 92 international independent authorized dealers. Marine Products’ mission is to enhance its customers’ boating experience by providing them with high quality, innovative powerboats. The Company intends to remain a leading manufacturer of recreational powerboats for sale to a broad range of consumers worldwide.

Chaparral was founded in 1965 in Ft. Lauderdale, Florida. Chaparral’s first boat was a 15-foot tri-hull design with a retail price of less than $1,000. Over time Chaparral grew by offering exceptional quality and consumer value. In 1976, Chaparral moved to Nashville, Georgia, where a manufacturing facility of a former boat manufacturing company was available for purchase. This provided Chaparral an opportunity to obtain additional manufacturing space and access to a trained workforce. With over 56 years of boatbuilding experience, Chaparral continues to expand the range of its offerings through insightful, innovative product design and quality manufacturing processes in order to reach an increasingly discerning recreational boating market.

The Company manufactures Chaparral sterndrive pleasure boats including SSi and SSX models, and the Chaparral Surf Series. The Company also manufactures Chaparral outboard pleasure boats which include OSX Luxury Sportboats, and SSi and SSX outboard models.

In addition to the outboard models manufactured by Chaparral, the Company also manufactures Robalo outboard sport fishing boats. Robalo was founded in 1969 and its first boat was a 19-foot center console salt-water fishing boat, among the first of

3

​

this type of boat to have an “unsinkable” hull. The models manufactured under the Robalo name include center consoles, dual consoles and Cayman Bay Boats.

The most recent available industry statistics [source: Statistical Surveys, Inc. report dated September 30, 2021] indicate that Robalo is the largest manufacturer of outboard boats in lengths from 18 to 36 feet in the United States with a market share of 4.8 percent. Additionally, the combination of Robalo and Chaparral outboards holds the second highest position in the outboard market of this size range, with a market share of 6.3 percent.

​

Products

Marine Products distinguishes itself by offering a wide range of products to the family recreational markets through its Chaparral brands and to the sport fishing market through its Robalo brand.

​

4

​

The following table provides a brief description of our product lines and their particular market focus:

​

5

​

Manufacturing

Marine Products’ manufacturing facilities are in Nashville, Georgia. Marine Products utilizes five different plants to, among other things, manufacture interiors, design new models, create fiberglass hulls and decks, and assemble various end products. Quality control is conducted throughout the manufacturing process. When fully assembled and inspected, the boats are loaded onto either Company-owned trailers or third-party marine transport trailers for delivery to dealers. The manufacturing process begins with the design of a product to meet dealer and customer needs. Plugs are constructed in the research and development phase from designs. Plugs are used to create a mold from which prototype boats can be built. Adjustments are made to the plug design until acceptable parameters are met. The final plug is used to create the necessary number of production molds. Molds are used to produce the fiberglass hulls and decks. Fiberglass components are made by applying the outside finish or gel coat to the mold, then numerous layers of fiberglass and resin are applied during the lamination process over the gel coat. After curing, the hull and deck are removed from the molds and are trimmed and prepared for final assembly, which includes the installation of electrical and plumbing systems, engines, upholstery, accessories and graphics.

Product Warranty

For our Chaparral and Robalo products, Marine Products provides a lifetime limited structural hull warranty and a transferable one-year limited warranty to the original owner. Chaparral also includes a five-year limited structural deck warranty. Warranties for additional items are provided for periods of one to five years and are not transferrable. Additionally, as it relates to the first subsequent owner, a five-year transferrable hull warranty and the remainder of the original one-year limited warranty on certain components are available. The five-year transferable hull warranty terminates five years after the date of the original retail purchase. Claim costs related to components are generally absorbed by the original component manufacturer.

The manufacturers of the engines, generators, and navigation electronics included on our boats provide and administer their own warranties for various lengths of time.

Suppliers

Marine Products’ three most significant cost components used in manufacturing its boats are engines, resins and fiberglass. For each of these, there is currently an adequate supply available in the market. During 2020 and 2021, at various times Marine Products experienced significant shortages in, and delayed shipments of, several of these raw materials and component parts used in manufacturing its products. These shortages have reduced our ability to meet the existing levels of dealer and consumer demand and have also increased working capital requirements during 2020 and 2021. Trade negotiations between the United States and other countries have the potential to cause disruptions in the availability of fiberglass, the largest supplier of which is in a country impacted by tariffs, though we have experienced no such disruptions. Marine Products believes that there are several alternative suppliers if this supplier fails to provide adequate quality or quantities at acceptable prices.

Marine Products does not manufacture the engines installed in its boats. Engines are generally specified by the dealers at the time of ordering, usually based on anticipated customer preferences or actual customer orders. Sterndrive engines are purchased through the American Boatbuilders Association (“ABA”), which has entered into engine supply arrangements with Mercury Marine and Volvo Penta, the two currently existing suppliers of sterndrive engines. These arrangements contain incentives and discount provisions, which may reduce the cost of the engines purchased, if specified purchase volumes are met during specified periods of time. Although no minimum purchases are required, Marine Products expects to continue purchasing sterndrive engines through the ABA on a voluntary basis in order to receive volume-based purchase discounts. Marine Products does not have a long-term supply contract with the ABA. Marine Products has an outboard engine supply contract with Yamaha which was not negotiated through the ABA. In the event of a sudden and extended interruption in the supply of engines from any of these suppliers, our sales and profitability could be negatively impacted. See “Risk Factors” below.

Marine Products uses other raw materials in its manufacturing processes. Among these are resins, made from hydrocarbon feedstocks, as well as copper and steel. The costs of these commodities fluctuate in response to changes in global economic conditions.

6

​

Sales and Distribution

Domestic sales are generated through our independent dealer network of approximately 71 Chaparral dealers, 47 Robalo dealers and 88 dealers that sell both brands located in markets throughout the United States. Marine Products also has 92 international dealers. Most of our dealers also inventory and sell boat brands manufactured by other companies, including some that compete directly with our brands. The territories served by any dealer are not exclusive to the dealer; however, Marine Products uses discretion in establishing relationships with new dealers in an effort to protect the mutual interests of the existing dealers and the Company. Marine Products’ six independent field sales representatives call upon existing dealers and develop new dealer relationships. The field sales representatives are directed by a National Sales Coordinator, who is responsible for developing the dealer distribution network for the Company’s products. No single dealer accounted for 10 percent or more of net sales during 2021, 2020 or 2019. The marketing of boats to retail customers is primarily the responsibility of the dealer. Marine Products supports dealer marketing efforts by supplementing local advertising, sales and marketing follow up in boating magazines, and participation in selected regional, national, and international boat show exhibitions. In addition, Marine Products has developed virtual marketing programs which include online product demonstrations and virtual reality software and hardware which promote the features of its products. The Company’s virtual marketing efforts have become increasingly important beginning in 2020, when social distancing requirements resulting from the COVID-19 pandemic limited customer interaction at boat dealers’ facilities and reduced in-person boat shows during the winter boat show season.

Marine Products continues to seek new dealers in many areas throughout the U.S., Canada, Europe, South America, Asia, Russia and the Middle East. In general, Marine Products requires full payment in U.S. dollars prior to shipping a boat overseas. Consequently, there is no credit risk associated with these international sales or risk related to foreign currency fluctuation. The Company’s international sales are affected by trends in consumer discretionary spending and the value of the U.S. dollar on global currency markets, among other things. During 2021, the Company’s international net sales increased 35.5 percent compared to 2020 despite the continued impact of trade tariffs enacted during 2018, most notably in Mexico, the United Kingdom and the European Union. International net sales as a percentage of total net sales were 5.3 percent in 2021, 4.9 percent in 2020, and 5.8 percent in 2019.

Marine Products’ sales orders are indicators of strong interest from its dealers. Historically, dealers have in most cases taken delivery of all their orders. In a typical ordering, production and delivery cycle, the Company monitors dealer inventory levels in order to inform its production scheduling and to ensure that dealers do not hold excess inventory. During 2021 and early 2022, however, extraordinarily high dealer and consumer demand combined with the Company’s production delays caused by supply chain disruptions have caused dealer inventories to fall to historic lows. The combination of low inventory levels and continued high demand has forced the Company to allocate its production to dealers to fulfill as many orders as possible and rebuild dealer inventories to levels that both the Company and its dealers believe to be appropriate. Marine Products believes that this allocation of production will continue during 2022. In the past, Marine Products has been able to resell any boat for which an order has been cancelled and believes that this ability will continue during the near term.

Approximately 51 percent of Marine Products’ domestic shipments are made pursuant to “floor plan financing” programs in which Marine Products’ subsidiaries participate on behalf of their dealers with major third-party financing institutions. The remaining dealers finance their boat inventory with smaller regional financial institutions in local markets or self-finance. Under these established arrangements with qualified lending institutions, a dealer establishes a line of credit with one or more of these lenders for the purchase of boat inventory for sales to retail customers in their showroom or during boat show exhibitions. In general, when a dealer purchases and takes delivery of a boat pursuant to a floor plan financing arrangement, it draws against its line of credit and the lender pays the invoice cost of the boat directly to Marine Products generally within ten business days. When the dealer in turn sells the boat to a retail customer, the dealer repays the lender, thereby restoring its available credit line. Each dealer’s floor plan credit facilities are secured by the dealer’s inventory, letters of credit, and perhaps other personal and real property. In connection with a dealer’s floor plan financing arrangements with a qualified lending institution, Marine Products or its subsidiaries have agreed to repurchase inventory which the lender repossesses from a dealer and returns to Marine Products in a “new and unused” condition subject to normal wear and tear, as defined. The contractual agreements that Marine Products or its subsidiaries have with these qualified lenders contain the Company’s assumption of specified percentages of the debt obligation on repossessed boats, up to certain contractually determined dollar limits negotiated with the lender.

7

​

The Company currently has an agreement with one of the floor plan lenders whereby the contractual repurchase amount is limited to a maximum of 16 percent of the average net receivables financed by the floor plan lender for dealers during the prior 12 month period, which was $4.1 million as of December 31, 2021. The Company has contractual repurchase agreements with additional lenders with an aggregate maximum repurchase obligation of $2.4 million, with various expiration and cancellation terms of less than one year. Accordingly, the aggregate repurchase obligation with all financing institutions was approximately $6.5 million as of December 31, 2021. In the event that a dealer defaults on a credit line, the qualified lender may then invoke the manufacturer’s repurchase obligation with respect to that dealer. In that event, all repurchase agreements of all manufacturers supplying a defaulting dealer are generally invoked regardless of the boat or boats with respect to which the dealer has defaulted. Unlike Marine Products’ obligation to repurchase boats repossessed by qualified lenders, Marine Products is under no obligation to repurchase boats directly from dealers. Marine Products does not sponsor financing programs to the retail consumer; any consumer financing promotions for a prospective boat purchaser would be the responsibility of the dealer.

Marine Products’ dealer sales incentive programs are generally designed to promote early replenishment of the stock in dealer inventories depleted throughout the prime spring and summer selling seasons, and to promote the sales of older models in dealer inventory and particular models during specified periods. These programs help to stabilize Marine Products’ manufacturing between the peak and off-peak periods and promote sales of certain models. For the 2022 model year (which commenced July 1, 2021), Marine Products offered its dealers several sales incentive programs based on dollar volume and timing of dealer purchases. Program incentives offered include sales discounts and payment of floor plan financing interest charged by qualified floor plan lenders to dealers generally through April 30, 2022. After the interest payment programs end, interest costs revert to the dealer at rates set by the lender. A dealer makes periodic curtailment payments (principal payments) on outstanding obligations against its dealer inventory as set forth in the floor plan financing agreements between the dealer and its particular lender.

We believe that dealer inventories of our boat models as of December 31, 2021 are insufficient to meet the current level of retail customer demand. The sales order backlog as of December 31, 2021 was 2,457 boats with estimated net sales of approximately $166.0 million. This represents an approximate 30.0 week backlog based on recent production levels. The sales order backlog as of December 31, 2020 was 2,975 boats with estimated net sales of approximately $164.9 million. This represented an approximate 29.8 week backlog based on production levels at that time. The Company’s backlog measured in weeks of production is significantly higher than historical averages due to production delays caused by supply chain disruptions and the surge in retail demand which has extended beyond the traditional retail selling season, both of which are related directly or indirectly to the COVID-19 pandemic. The Company will continue to monitor the number of boats in dealer inventories and adjust its production levels as it deems necessary to manage dealer inventory levels. Due to the high retail demand, over 90 percent of our boats have been in dealer inventory less than 12 months as of December 31, 2021. The Company typically does not manufacture a significant number of boats for its own inventory. The Company occasionally manufactures boats for its own inventory because the number of boats required for immediate shipment is not always the most efficient number of boats to produce in a given production schedule.

Research and Development

Essentially the same technologies and processes are used to produce fiberglass boats by all boat manufacturers. The most common method to build fiberglass boats is with open-face molding. This is usually a labor-intensive, manual process whereby employees hand spray and apply fiberglass and resin in layers on open molds to create boat hulls, decks and other smaller fiberglass components. A single open-face mold is typically capable of producing approximately three hulls per week.

Marine Products has been a leading innovator in the recreational boating industry. One of the Company’s most innovative designs is the full-length “Extended V-Plane” running surface on its Chaparral boat models. Typically, sterndrive boats have a several foot gap on the bottom rear of the hull where the engine enters the water. With the Extended V-Plane, the running surface extends the full length to the rear of the boat. The benefit of this innovation is more deck space, better planing performance and a more comfortable ride. Although the basic hull designs are similar, the Company has historically introduced a variety of new models each year and periodically replaces, updates or discontinues existing models.

Another hull design is the Hydro Lift^TM used on the Robalo boat models. This variable dead rise hull design provides a smooth ride in rough water conditions. It increases the maximum speed obtainable by a given engine horsepower and weight of the boat. Robalo’s current models utilize the Hydro Lift^TM design and we plan to continue to provide this design on Robalo models.

8

​

In support of its new product development efforts, Marine Products incurred research and development costs of $776 thousand in 2021, $751 thousand in 2020, and $730 thousand in 2019.

Industry Overview

The recreational marine market in the United States is a mature market, with 2020 retail expenditures of approximately $49 billion spent on new and used boats, motors and engines, trailers, accessories and other associated costs as estimated by the National Marine Manufacturers Association (“NMMA”). Pleasure boats compete with all other leisure activities for consumers’ limited free time.

There are currently approximately 16 million recreational boats owned in the United States, including outboard, inboard, sterndrive, jet drive, sailboats and personal watercraft. Marine Products competes in the sterndrive boating category with three lines of Chaparral boats and in the outboard category with its Robalo sport fishing boats, OSX Sport Luxury, and selected SSi and SSX models. Management believes that the five largest states for boat sales at the present time are Florida, Texas, Michigan, Minnesota and Wisconsin. Marine Products has dealers in each of these states.

Industry sales of new outboard boats in the United States during 2021 totaled 53,471 units and accounted for approximately 73 percent of the total new fiberglass powerboats sold between 18 and 36 feet in hull length. Sales of new outboard boats had an estimated total retail value of $3.8 billion, with an average retail price per unit of approximately $71,000. Approximately 62 percent of the Company’s unit sales in 2021 were outboard boats compared to 63 percent in 2020. Sales of new sterndrive boats in the United States during 2021 totaled 7,165 units and accounted for approximately 10 percent of the total new fiberglass powerboats sold in the 21 to 34 feet hull length. Sales of new sterndrive boats had an estimated total retail value of $800 million, with an average retail price per unit of approximately $115,000. Approximately 38 percent of the Company’s unit sales in 2021 were sterndrive boats compared to 35 percent in 2020.

The table below reflects the estimated annual sales within the recreational marine market segment by category for 2021 and 2020 (source: Info-Link Technologies, Inc.):

​

Chaparral’s products are categorized as sterndrive boats and outboard boats, and Robalo’s products are categorized as outboard boats. Industry-wide sterndrive boat unit sales have declined steadily during the last three years.

The recreational boat manufacturing market remains highly fragmented, although several large public companies own, or have started to acquire, a diversified group of recreational boat manufacturers. We estimate that the boat manufacturing industry includes fewer than 20 sterndrive manufacturers and approximately 75 outboard boat manufacturers with significant unit production, with the majority representing small, privately held companies with varying degrees of professional management and manufacturing skill. According to estimates provided by Statistical Surveys, Inc., during the latest reported period ended September 30, 2021, the top five outboard model manufacturers, which include Marine Products Corporation’s Robalo and Chaparral brands, have a combined market share of approximately 28 percent, the same as during the same period in the prior year. Also according to Statistical Surveys, Inc., the top five sterndrive model manufacturers, which includes Chaparral, have a combined market share of approximately 74 percent compared to 66 percent in the same period one year ago. Chaparral’s market share in sterndrive units during this period was approximately 19.4 percent, an increase compared to the same period in the prior year. The Company believes that its strong market share is primarily due to the success of our larger SSX models and the Surf Series.

Several factors influence sales trends in the recreational boating industry, including general economic growth, consumer confidence, household incomes, the availability and cost of financing for our dealers and customers, weather, fuel prices, tax laws, demographics and consumers’ leisure time. As noted elsewhere, consumer demand began to increase significantly during the second quarter of 2020 as the COVID-19 pandemic encouraged American consumers to seek safe outdoor activities involving a limited number of people. Also, the value of residential and vacation real estate in coastal and recreational areas influences recreational boat

9

​

sales. The most recent NMMA surveys indicate that many past boating participants do not currently participate in boating because of high costs and a lack of leisure time. The increases in the cost of certain components, international tariffs, operating costs, and the impact of environmental regulation have increased the cost of boats and boat ownership in recent years, and these trends may continue. Competition from other leisure and recreational activities for available leisure time can also affect sales of recreational boats.

Management believes Marine Products is well positioned to take advantage of the following conditions, which continue to characterize the industry:

Business Strategies

Recreational boating is a mature industry. According to Info-Link Technologies, Inc., sales of new powerboats of all types increased at a compounded annual rate of approximately 1.3 percent between 2017 and 2021. During this period, Marine Products experienced a compounded annual decline rate of approximately 5.8 percent in the number of boats sold. The Company has historically grown its boat sales and net sales primarily through increasing market share and by expanding its number of models and product lines. At the end of 2021, the Company’s dealer inventories were approximately 31.5 percent lower than they were at the end of 2020, and our unit order backlog was 17.4 percent lower than it was at the end of 2020. In spite of high retail and dealer demand, and historically low dealer inventories, our unit order backlog is lower at the end of 2021 than at the end of 2020 because current supply chain issues prevent us from forecasting our production accurately during the near term. We believe that dealer inventories are not sufficient to meet retail demand during the 2022 retail selling season. Chaparral has grown its sterndrive market share in its size category from 5.9 percent in fiscal 1996 to 19.4 percent during the latest reported period ended September 30, 2021 (the most recent information available to us from Statistical Surveys, Inc.).

During 2021, Marine Products generated its highest unit sales volume within two of Chaparral’s sterndrive SSI models. We also generated high unit sales volumes within some of our larger Robalo center console models. In general, our model mix during 2021 shifted to larger boats, which generate higher average selling prices.

Our high-volume models support Marine Products’ overall operating strategy, which emphasizes innovative designs and manufacturing processes, and the production of a high-quality product, while also seeking to lower manufacturing costs through increased efficiencies in our facilities. In addition, we seek opportunities to leverage our buying power through economies of scale. Management believes its membership in the ABA positions Marine Products as a significant third-party customer of major suppliers of sterndrive engines. Marine Products’ Chaparral subsidiary is a founding member of the ABA, which collectively represents 23 independent boat manufacturers that have formed a buying group to pool their purchasing power to achieve improved pricing on engines, fiberglass, resin and many other components. Marine Products intends to continue seeking the most advantageous purchasing arrangements from its suppliers.

Our marketing strategy seeks to increase market share by enabling Marine Products to expand its presence by building dedicated sales, marketing and distribution systems. Marine Products has a distribution network of 298 independent dealers located throughout the United States and in several international markets. Our strategy is to increase selectively the quantity of our dealers, and to improve the quality and effectiveness of our entire dealer network. Marine Products seeks to capitalize on its strong dealer network by educating its dealers on the sales and servicing of our products and helping them provide more comprehensive customer service, with the goal of increasing customer satisfaction, customer retention and future sales. Marine Products provides promotional and incentive programs to help its dealers increase product sales and customer satisfaction. During 2021 we continued to develop our nationally advertised fixed retail pricing strategy. We believe the nationally advertised fixed retail pricing gives the consumer confidence that that they are getting the best possible price resulting in higher customer satisfaction and encourages consistent pricing across our dealer network. Marine Products also realizes that innovative marketing is an increasingly important component of the full

10

​

customer experience and is leading the way with marketing and branding that consistently present a luxury-oriented message that integrate themselves into the boater’s entire experience.

A component of Marine Products’ overall strategy is to consider making strategic acquisitions which complement existing product lines, expand its geographic presence in the marketplace and strengthen its capabilities depending upon availability, price and complementary product lines. We periodically review potential acquisition targets.

Competition

The recreational boat industry is highly fragmented, resulting in intense competition for customers, dealers and boat show exhibition space. There is significant competition both within markets we currently serve and in new markets that we may enter. Marine Products’ brands compete with several large national or regional manufacturers that have substantial financial, marketing and other resources. However, we believe that our corporate infrastructure and marketing and sales capabilities, in addition to our financial strength, and our nationwide presence, enable us to compete effectively against these companies. In each of our markets, Marine Products competes on the basis of responsiveness to customer needs, the quality and range of models offered, and the competitive pricing of those models. Additionally, Marine Products faces general competition from all other recreational businesses seeking to attract consumers’ leisure time and discretionary spending dollars.

According to Statistical Surveys, Inc., the following is a list of the top ten (largest to smallest) outboard boat manufacturers in the United States based on unit sales in 2021. According to Statistical Surveys, Inc., the companies set forth below represent approximately 45 percent of all United States retail outboard boat registrations with hull lengths of 18 to 36 feet for the 12-month period ended September 30, 2021 (latest data available to us).

The sterndrive engine powered market encompasses a wide variety of boats, accounting for approximately 10 percent of traditional powerboat unit sales during 2021. Marine Products Corporation’ Chaparral brand was the second largest manufacturer of sterndrive boats in lengths from 21 to 34 feet during the 12-month period ended September 30, 2021 and its share of the market during this period was approximately 19.4 percent. Primary competitors for Chaparral sterndrive market during 2021 included Cobalt ⁴, Regal, Sea Ray ⁵, Crownline and Monterey.

¹ Includes Bayliner and Boston Whaler outboard units

² Includes Robalo and Chaparral outboard units

³ Division or subsidiary of MasterCraft Boat Holdings, Inc.

⁴ Division or subsidiary of Malibu Boats, Inc.

⁵ Division or subsidiary of Brunswick Corporation

Environmental and Regulatory Matters

Certain materials used in boat manufacturing, including the resins used to make the decks and hulls, are toxic, flammable, corrosive, or reactive and are classified by the federal and state governments as “hazardous materials.” Control of these substances is regulated by the Environmental Protection Agency (“EPA”) and state pollution control agencies, which require reports and facility inspections to monitor compliance with their regulations. The Occupational Safety and Health Administration (“OSHA”) standards limit the amount of emissions to which an employee may be exposed without the need for respiratory protection or upgraded plant ventilation. Marine Products’ manufacturing facilities are regularly inspected by OSHA and by state and local inspection agencies and

11

​

departments. Marine Products believes that its facilities comply in all material aspects with these regulations. We do not currently anticipate that any material expenditure will be required to continue to comply with existing environmental or safety regulations in connection with our existing manufacturing facilities.

Recreational powerboats sold in the United States must be manufactured to meet the standards of certification required by the United States Coast Guard. In addition, boats manufactured for sale in the European Community must be compliant with the International Organization for Standardization requirements which specify standards for the design and construction of powerboats. All boats sold by Marine Products meet these standards. In addition, safety of recreational boats is subject to federal regulation under the Boat Safety Act of 1971. The Boat Safety Act requires boat manufacturers to recall products for replacement of parts or components that have demonstrated defects affecting safety. Marine Products has from time to time instituted recalls for defective component parts produced by other manufacturers. None of the recalls has had a material adverse effect on Marine Products.

The EPA has adopted regulations stipulating that many marine propulsion engines meet an air emission standard that requires fitting a catalytic converter to the engine. These regulations also require, among other things, that the engine manufacturer provide a warranty that the engine meets EPA emission standards. The engines used in Marine Products’ Chaparral and Robalo product lines are subject to these regulations. These regulations are similar to regulations adopted by the California Air Resources Board in 2007 but apply to all U.S. states and territories. This regulation has increased the cost to manufacture the majority of the Company’s boat products. Compliance with these EPA regulations has increased Marine Products’ cost and may also reduce Marine Products’ net sales, because the increased cost of owning a boat may force consumers to buy a smaller or less expensive boat.

Human Capital

The table below shows the number of employees at December 31, 2021 and 2020:

​

The recreational boating industry is cyclical and therefore headcount is subject to change based on production levels which are a function of dealer and consumer demand. The Company’s key human capital management objectives are focused on fostering talent in the following areas:

Diversity and Equality - The Company’s workforce reflects the diversity of the community in which it operates. Our dedicated team of employees work toward a common purpose. We provide employment in a small community which we have supported as the largest employer since 1976 under the same management. Our company is strong in its values, relationships and consistency in management. The Board of Directors has a human capital and compensation committee that, among other things, monitors compliance with applicable non-discrimination laws related to race, gender and other protected classes. The Committee provides a report of such incidences to the Board on an annual basis.

Development and Training - The Company’s management team and all its employees are expected to exhibit and promote honest, ethical and respectful conduct in the workplace. We have implemented and maintained a corporate compliance program to provide guidance for everyone associated with the Company, including its employees, officers and directors (the “Code”). Annual review of the Code is required, and the Code prohibits unlawful or unethical activity, including discrimination, and directs our employees, officers, and directors to avoid actions that, even if not unlawful or unethical, might create an appearance of illegality or impropriety. In addition, the Company provides annual training for preventing, identifying, reporting and stopping any type of unlawful discrimination.

Employee Retention - Marine Products monitors voluntary employee turnover and reports these statistics to senior operational management. From time to time, the Company has rewarded employee tenure through various bonus programs for its hourly employees based on attendance and job performance.

Compensation and Benefits - The Company focuses on attracting and retaining employees by providing compensation and benefit packages that are competitive in the market, taking into account the location and responsibilities of the job. We provide competitive financial benefits such as a 401(k) retirement plan with a company match, and generally grant awards of restricted stock for certain of our salaried employees.

12

​

The Company provides a health insurance option that includes a local primary physician who provides immediate care or medical consultation to its employees at reduced or no cost, as well as certain maintenance medications at reduced or no cost. Under this program, an employee with a health concern visits the physician’s office, which is close to our manufacturing facility, and either receives care or is referred to another facility for testing or additional care. We believe that this program improves employee well-being by facilitating their access to health care.

Safety - Marine Products monitors several safety measures and reports them to senior operational management on a regular basis. Management reviews safety incidents, and the Company works to remediate operational issues that may be potential causes of any frequent incidents. In addition, the Company awards safety bonuses to the drivers of its company-owned vehicles based on their driving records.

In response to the COVID-19 pandemic, Marine Products temporarily suspended manufacturing operations for five weeks at the end of the first quarter of 2020, out of concern for the well-being of its employees and their families, and at the recommendation of local and state authorities. The Company also coordinated testing for employees at a local physician’s office. The Company has since resumed operations and implemented additional safety measures for its employees including providing face masks and hand sanitizer as well as social distancing where possible. The Company encourages vaccinations and has created opportunities for employees to conveniently receive vaccinations at their job site.

Proprietary Matters

Marine Products owns several trademarks, trade names and patents that it believes are important to its business. Except for the Chaparral and Robalo trademarks, however, Marine Products is not dependent upon any single trademark or trade name or group of trademarks or trade names. The Chaparral and Robalo trademarks are currently registered in the United States. The current duration for such registration ranges from seven to 15 years but each registration may be renewed an unlimited number of times.

Seasonality

Marine Products’ quarterly operating results are affected by weather and general economic conditions. Quarterly operating results for the second quarter traditionally record the highest sales volume for the year because this corresponds with the highest retail sales volume period. For similar reasons, quarterly operating results for the fourth quarter often record the lowest sales volume for the year. However, in 2020 Marine Products recorded the lowest quarterly sales volume of the year in the second quarter because of our temporary production facility closure caused by the COVID-19 pandemic, and the highest sales volume of the year in the fourth quarter of 2020, due to high retail demand which extended beyond the traditional retail selling season for recreational boats. Boat demand remained very high in 2021 and we believe that these consumer behaviors will continue in 2022. The results for any quarter are not necessarily indicative of results to be expected in any future period.

Inflation

The market prices of certain materials used in manufacturing the Company’s products, especially resins that are made with hydrocarbon feedstocks, copper and steel, have at certain periods been volatile. During 2021, the prices of these raw materials continued to increase compared to prices in 2020 as the global economy began to recover from the global economic slowdown caused by the COVID-19 pandemic. The Company also purchases components of which there are a limited number of suppliers, some of whom temporarily suspended their manufacturing operations due to the COVID-19 pandemic and are experiencing significant customer orders impacting their ability to provide needed supply quantities. The costs of most of these components have increased as demand from recreational boat manufacturers has increased and supply chains have remained constrained. These cost increases are exacerbated by higher transportation costs, which are included in the total cost of these components. These higher component prices increase the costs of manufacturing the Company’s products. In response to historically high consumer demand as well as higher raw materials and components prices, the Company has increased the prices for its products for the 2022 model year which began during the third quarter of 2021. In addition, the Company instituted further price increases during the fourth quarter of 2021 to compensate for continued raw materials price increases incurred by the Company during the third and fourth quarters of 2021 and this may continue during 2022. Marine Products believes that these price increases will allow the Company to maintain or improve our profit margins. We also believe that these price increases will have no immediate impact on consumer demand, but if we are forced to institute continued price increases, the higher cost of our products may compel consumers to choose a smaller boat or forgo the purchase altogether.

13

​

New boat buyers typically finance their purchases. Higher inflation typically results in higher interest rates that could translate into an increased cost of boat ownership. In the event that interest rates rise, or lending standards for consumer loans become more stringent, prospective buyers may choose to forego or delay their purchases or buy a less expensive boat. The Company believes that the recent increase in inflation and the Federal Reserve’s announcement that it will act to raise interest rates creates a risk to retail demand for recreational boats. However, we do not believe that this risk will impact production and sales due to other factors, such as historically low dealer inventories, high dealer backlog, and indications of consumer demand that extend beyond the 2022 retail selling season.

Availability of Filings

Marine Products makes available free of charge on its website, MarineProductsCorp.com, the annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports on the same day as they are filed with the Securities and Exchange Commission.

Item 1A. Risk Factors

Risks Related to our Business.

Economic Conditions, Availability of Credit and Consumer Confidence Levels Affect Marine Products’ Sales Because Marine Products’ Products are Purchased with Discretionary Income.

During an economic recession or when an economic recession is perceived as a threat, Marine Products will be adversely affected as consumers have less discretionary income or are more apt to save their discretionary income rather than spend it. During times of global political or economic uncertainty, Marine Products will be negatively affected to the extent consumers forego or delay large discretionary purchases pending the resolution of those uncertainties. Historical volatility in the prices and financial returns of investments and residential real estate may force consumers to delay retirement, or to choose more modest lifestyles when they do retire. In such a case, consumers may not purchase boats, may purchase boats later in their lives, or may purchase smaller or less expensive boats. Tight lending and credit standards, which until recently have been in use by lenders in the United States, can make loans for boats harder to secure, and such loans may carry unfavorable terms, which may force consumers to forego boat purchases. These factors have also resulted in the past, and may continue to result in the future, in a reduction in the quality and number of dealers upon which Marine Products relies to sell its products.

Marine Products Relies upon Third-Party Dealer Floor Plan Lenders Which Provide Financing to its Network of Independent Dealers.

Marine Products sells its products to a network of independent dealers, most of whom rely on one or more third-party dealer floor plan lenders to provide financing for their inventory prior to its sale to retail customers. In general, this source of financing is vital to Marine Products’ ability to sell products to its dealer network. While dealer floor plan credit is currently available for many of our dealers during the 2022 model year, the Company’s sales and profitability could be adversely affected in the event of a decline in floor plan financing availability, or if financing terms change unfavorably.

Interest Rates and Fuel Prices Affect Marine Products’ Sales.

The Company’s products are often financed by our dealers and the retail boat consumers. Higher interest rates increase the borrowing costs and, accordingly, the cost of doing business for dealers and the cost of boat purchases for consumers. Fuel costs can represent a large portion of the costs to operate our products. Therefore, higher interest rates and fuel costs can adversely affect consumers’ decisions relating to recreational boating purchases.

Marine Products’ Dependence on its Network of Independent Boat Dealers May Affect its Operating Results and Sales.

Virtually all Marine Products’ sales are derived from its network of independent boat dealers. Marine Products has no long-term agreements with these dealers. Competition for dealers among recreational powerboat manufacturers continues to increase based on the quality of available products, the price and value of the products, and attention to customer service. The Company faces intense competition from other recreational powerboat manufacturers in attracting and retaining independent boat dealers. The number of

14

​

independent boat dealers supporting the Chaparral and Robalo trade names and the quality of their marketing and servicing efforts are essential to Marine Products’ ability to generate sales. A deterioration in the number of Marine Products’ network of independent boat dealers could have a material adverse effect on its boat sales. Marine Products’ inability to attract new dealers and retain those dealers, or its inability to increase sales with existing dealers, could substantially impair its ability to execute its business plans. Although Marine Products’ management believes that the quality of its products and services in the recreational boating market should permit it to maintain its relationship with its dealers and its market position, there can be no assurance that Marine Products will be able to sustain its current sales levels.

Marine Products’ Financial Condition and Operating Results may be Adversely Affected by Boat Dealer Defaults.

The Company’s products are sold through independent dealers and the financial health of these dealers is critical to the Company’s continued success. The Company’s results can be negatively affected if a dealer defaults because Marine Products or its subsidiaries may be contractually required to repurchase inventory up to certain limits, although for business reasons, the Company may decide to purchase additional boats in excess of this contractual obligation.

Marine Products’ Sales are Affected by Weather Conditions.

Marine Products’ business is subject to weather patterns that may adversely affect its sales. For example, drought conditions, or merely reduced rainfall levels, or excessive rain, may close area boating locations or render boating dangerous or inconvenient, thereby curtailing customer demand for our products. In addition, unseasonably cool weather and prolonged winter conditions may lead to a shorter selling season in some locations. Hurricanes and other storms could cause disruptions of our operations or damage to our boat inventories and manufacturing facilities.

Marine Products Encounters Intense Competition Which Affects our Sales and Profits.

The recreational boat industry is highly fragmented, resulting in intense competition for customers, dealers and boat show exhibition space. This competition affects both the markets which we currently serve and new markets that we may enter in the future. We compete with several large national or regional manufacturers that have substantial financial, marketing and other resources.

Because Marine Products Relies on Third-party Suppliers, Marine Products may be Unable to Obtain Adequate Raw Materials, Engines and Components Which Could Adversely Affect Sales and Profit Margins.

Marine Products is dependent on third-party suppliers to provide raw materials, engines and components essential to the construction of its various powerboats. Especially critical are the availability and cost of marine engines and commodity raw materials used in the manufacture of Marine Products’ boats. Marine Products has only four suppliers for the three types of engines it purchases. While Marine Products’ management believes that supplier relationships currently in place are sufficient to provide the engines and materials necessary to meet present production demands, there can be no assurance that these relationships will continue, that these suppliers will remain in operation or that the quantity or quality of materials available from these suppliers will be sufficient to meet Marine Products’ future needs. Disruptions in current supplier relationships or the inability of Marine Products to continue to purchase construction materials in sufficient quantities and of sufficient quality at acceptable prices to meet ongoing production schedules could cause a decrease in sales or a sharp increase in the cost of goods sold. Additionally, because of this dependence, the volatility in commodity raw materials or current or future price increases in production materials or the inability of Marine Products’ management to purchase engines and materials required to execute its growth and acquisition strategies could reduce the number of boats Marine Products may be able to produce for sale or cause a reduction in Marine Products’ profit margins.

As note, we rely on third parties to supply a number of raw materials used in our manufacturing processes. Prices for these raw materials fluctuate, often unpredictably, due to market forces beyond our control. When prices of these raw materials increase, we attempt to preserve our profit margins by increasing the prices of our products. During 2021, we experienced increases in raw materials prices and successfully preserved our profitability by increasing prices for our products. However, if inflation continues in the prices of these or other raw materials or parts and components, there is no assurance that we can continue to increase the prices of our products and preserve our profitability.

15

​

Marine Products may be Unable to Identify, Complete or Successfully Integrate Acquisitions.

Marine Products intends to pursue acquisitions and form strategic alliances that will enable Marine Products to acquire complementary skills and capabilities, offer new products, expand its customer base, and obtain other competitive advantages. There can be no assurance, however, that Marine Products will be able to successfully identify suitable acquisition candidates or strategic partners, obtain financing on satisfactory terms, complete acquisitions or strategic alliances, integrate acquired operations into its existing operations, or expand into new markets. Once integrated, acquired operations may not achieve anticipated levels of sales or profitability, or otherwise perform as expected. Acquisitions also involve special risks, including risks associated with unanticipated problems, liabilities and contingencies, diversion of management resources, and possible adverse effects on earnings and earnings per share resulting from increased interest costs, the issuance of additional securities, and difficulties related to the integration of the acquired business. The failure to integrate acquisitions successfully may divert management’s attention from Marine Products’ existing operations and may damage Marine Products’ relationships with its key customers and suppliers.

Risk Management Risks.

Marine Products has Potential Liability for Personal Injury and Property Damage Claims.

The products we sell or service may expose Marine Products to potential liabilities for personal injury or property damage claims relating to the use of those products. Historically, the resolution of product liability claims has not materially affected Marine Products’ business. Marine Products maintains product liability insurance that it believes to be adequate. However, there can be no assurance that Marine Products will not experience legal claims in excess of its insurance coverage or that claims will be covered by insurance. Furthermore, any significant claims against Marine Products could result in negative publicity, which could cause Marine Products’ sales to decline.

If Marine Products is Unable to Comply with Environmental and Other Regulatory Requirements, its Business may be Exposed to Liability and Fines.

Marine Products’ operations are subject to extensive regulation, supervision and licensing under various federal, state and local statutes, ordinances and regulations. While Marine Products believes that it maintains all requisite licenses and permits and is in compliance with all applicable federal, state and local regulations, there can be no assurance that Marine Products will be able to continue to maintain all requisite licenses and permits and comply with applicable laws and regulations. The failure to satisfy these and other regulatory requirements could cause Marine Products to incur fines or penalties or could increase the cost of operations. The adoption of additional laws, rules and regulations could also increase Marine Products’ costs.

The U.S. Environmental Protection Agency (EPA) has adopted regulations affecting many marine propulsion engines. This regulation has increased the cost of boats subject to the regulation, which may either reduce the Company’s profitability or reduce sales.

As with boat construction in general, our manufacturing processes involve the use, handling, storage and contracting for recycling or disposal of hazardous or toxic substances or wastes. Accordingly, we are subject to regulations regarding these substances, and the misuse or mishandling of such substances could expose Marine Products to liability or fines.

Additionally, certain states have required or are considering requiring a license to operate a recreational boat. While such licensing requirements are not expected to be unduly restrictive, regulations may discourage potential first-time buyers, thereby reducing future sales.

Risks Related to our Labor Force.

Marine Products’ Success Will Depend on its Key Personnel, and the Loss of any Key Personnel may Affect its Powerboat Sales.

Marine Products’ success will depend to a significant extent on the continued service of key management personnel. The loss or interruption of the services of any senior management personnel or the inability to attract and retain other qualified management, sales, marketing and technical employees could disrupt Marine Products’ operations and cause a decrease in its sales and profit margins.

16

​

Marine Products’ Ability to Attract and Retain Qualified Employees is Crucial to its Results of Operations and Future Growth.

Marine Products relies on the existence of an available hourly workforce to manufacture its products. As with many businesses, we are challenged at times to find qualified employees. There are no assurances that Marine Products will be able to attract and retain qualified employees to meet current and/or future growth needs.

General Risks.

Marine Products’ Stock Price has been Volatile.

Historically, the market price of common stock of companies engaged in the discretionary consumer products industry has been highly volatile. Likewise, the market price of our common stock has varied significantly in the past. In addition, the availability of Marine Products common stock to the investing public is limited to the extent that shares are not sold by the executive officers, directors and their affiliates, which could negatively impact the trading price of Marine Products’ common stock, increase volatility and affect the ability of minority stockholders to sell their shares. Future sales by executive officers, directors and their affiliates of all or a substantial portion of their shares could also negatively affect the trading price of Marine Products’ common stock. We currently have an effective Form S-3 registration statement on file with the Securities and Exchange Commission that would allow the sale of significant blocks of our common stock by us and certain of our largest shareholders.

Risks Related to Our Capital and Ownership Structure.

Marine Products’ Executive Officers, Directors and Their Affiliates Together Have a Substantial Ownership Interest; Public Stockholders may have no Effective Voice in Marine Products’ Management.

The Company has elected the “Controlled Corporation” exemption under Section 303A of the New York Stock Exchange (“NYSE”) Listed Company Manual. The Company is a “Controlled Corporation” because a group that includes the Company’s Chairman of the Board, Gary W. Rollins, who is also a director of the Company, and certain companies under his control (the “Controlling Group”), controls in excess of fifty percent of the Company’s voting power. As a “Controlled Corporation,” the Company need not comply with certain NYSE rules including those requiring a majority of independent directors and independent nominating and compensation committees.

Marine Products’ executive officers, directors and their affiliates hold directly or through indirect beneficial ownership, in the aggregate, approximately 73 percent of Marine Products’ outstanding shares of common stock. As a result, these stockholders effectively control the operations of Marine Products, including the election of directors and approval of significant corporate transactions such as acquisitions. This concentration of ownership could also have the effect of delaying or preventing a third-party from acquiring control of Marine Products at a premium.

Our Executive Officers, Directors and Their Affiliates Together Have a Substantial Ownership Interest, and the Availability of Marine Products’ Common Stock to the Investing Public May be Limited.

The availability of Marine Products’ common stock to the investing public may be limited to those shares not held by the executive officers, directors and their affiliates, which could negatively impact Marine Products’ stock trading prices and affect the ability of minority stockholders to sell their shares. Future sales by executive officers, directors and their affiliates of all or a portion of their shares could also negatively affect the trading price of our common stock.

17

​

The Controlling Group Could Take Actions That Could Negatively Impact Our Results of Operations, Financial Condition or Stock Price.

The Controlling Group may from time to time and at any time, in their sole discretion, acquire or cause to be acquired, additional equity or other instruments of the Company, its subsidiaries or affiliates, or derivative instruments the value of which is linked to Company securities, or dispose or cause to be disposed, such equity or other securities or instruments, in any amount that the Controlling Group may determine in their sole discretion, through open market transactions, privately negotiated transactions or otherwise. In addition, depending upon a variety of factors, the Controlling Group may at any time engage in discussions with the Company and its affiliates, and other persons, including retained outside advisers, concerning the Company’s business, management, strategic alternatives and direction, and in their sole discretion, consider, formulate and implement various plans or proposals intended to enhance the value of their investment in the Company. In the event the Controlling Group were to engage in any of these actions, our common stock price could be negatively impacted, such actions could cause volatility in the market for our common stock or could have a material adverse effect on our results of operations and our financial condition.

Provisions in Marine Products’ Certificate of Incorporation and Bylaws may Inhibit a Takeover of Marine Products.

Marine Products’ certificate of incorporation, bylaws and other documents contain provisions including advance notice requirements for stockholder proposals and director nominations, and staggered terms of office for the Board of Directors. These provisions may make a tender offer, change in control or takeover attempt that is opposed by Marine Products’ Board of Directors more difficult or expensive.

Risks Related to Digital Operations, Cybersecurity and Business Disruption.

Our operations rely on digital systems and processes that are subject to cyber-attacks or other threats that could have a material adverse effect on our business, consolidated results of operations and consolidated financial condition.

Our operations are dependent on digital technologies and services. We use these technologies and services for internal purposes, including data storage, processing and transmissions, as well as in our interactions with customers and suppliers. Digital technologies are subject to the risk of cyber-attacks, both from internal and external threats. Internal threats in cybersecurity are caused by the misuse of access to networks and assets by individuals within the Company by maliciously or negligently disclosing, modifying or deleting sensitive information. Individuals within the Company include current employees, contractors and partners. External threats in cybersecurity are caused by unauthorized parties attempting to gain access to our networks and assets by exploiting security vulnerabilities or through the introduction of malicious code, such as viruses, worms, Trojan horses and ransomware. In response to the risk of cyber-attacks, we regularly review and update processes to prevent unauthorized access to our networks and assets and misuse of data. We provide security awareness training for all employees, and closely manage the accounts and privileges of all employees and contractors. We also maintain an up-to-date incident response plan to quickly address cybersecurity incidents.

If our systems for protecting against cybersecurity risks prove to be insufficient, we could be adversely affected by, among other things, loss of or damage to intellectual property, proprietary or confidential information, or customer, supplier, or employee data, as well as, interruption of our business operations and increased costs required to prevent, respond to, or mitigate cybersecurity attacks. These risks could harm our reputation and our relationships with customers, suppliers, employees and other third parties, and may result in claims against us. These risks could have a material adverse effect on our business, consolidated results of operations and consolidated financial condition.

​

Item 1B. Unresolved Staff Comments

None.

​

18

​

Item 2. Properties

Marine Products’ corporate offices are in Atlanta, Georgia. These offices are currently shared with RPC and are leased. The monthly rent paid is allocated between Marine Products and RPC. Under this arrangement, Marine Products pays approximately $3,700 per month in rent. Marine Products may cancel this arrangement at any time after giving a 30-day notice.

Chaparral owns and maintains approximately 1,162,000 square feet of space utilized for manufacturing, research and development, warehouse, sales office and operations in Nashville, Georgia. In addition, the Company owns 83,000 square feet of manufacturing space in Valdosta, Georgia. Marine Products’ total square footage under roof is allocated as follows: manufacturing — 724,700, research and development — 68,500, warehousing — 315,700, office and other — 136,100.

​

Item 3. Legal Proceedings

Marine Products is involved in litigation from time to time in the ordinary course of its business. Marine Products does not believe that the ultimate outcome of such litigation will have a material adverse effect on its liquidity, financial condition or results of operations.

​

Item 4. Mine Safety Disclosures

Not applicable.

​

Item 4A. Information About Our Executive Officers

In April of 2021, the Executive Officers of the Company were elected by the Board of Directors to serve at least one year, or until the April 2022 Board of Directors’ meeting, or until their earlier removal by the Board of Directors or resignation. The following table lists the executive officers of Marine Products and their ages, offices, and date first elected to office.

​

​

19

​

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Marine Products’ common stock is listed for trading on the New York Stock Exchange under the symbol “MPX.” As of February 18, 2022, there were 34,147,179 shares of common stock outstanding and approximately 4,700 beneficial holders of our Company’s common stock.

Issuer Purchases of Equity Securities

The Company's Board of Directors announced a stock buyback program on April 25, 2001 authorizing the repurchase of 2,250,000 shares in the open market and another on March 14, 2005 authorizing the repurchase of an additional 3,000,000 shares. On January 22, 2008 the Board of Directors authorized an additional 3,000,000 shares that the Company may repurchase. The Company did not repurchase any shares under this program in 2021. There are 1,570,428 shares that remain available for repurchase as of December 31, 2021. The program does not have a predetermined expiration date.

Performance Graph

The following graph shows a five-year comparison of the cumulative total stockholder return based on the performance of the stock of the Company, assuming dividend reinvestment, as compared with both a broad equity market index and an industry or peer group index. The indices included in the following graph are the Russell 2000 Index (“Russell 2000”) and a peer group which includes companies that are considered peers of the Company (“Peer Group”). The companies included in the Peer Group have been weighted according to each respective issuer’s stock market capitalization at the end of each year. The companies in the Peer Group are Brunswick Corporation, MarineMax, Inc., Malibu Boats, Inc. and Mastercraft Boat Holdings, Inc.

The Russell 2000 is used because the Company is a component of the Russell 2000, and because the Russell 2000 is a stock index representing small capitalization U.S. stocks. During 2021, the components of the Russell 2000 had an average market capitalization of $3.0 billion, and a median market capitalization of $1.3 billion.

The graph below assumes the value of $100.00 invested on December 31, 2016.

20

​

Item 6. Reserved

​

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Presentation

The following discussion should be read in conjunction with “Selected Financial Data” and the Consolidated Financial Statements included elsewhere in this document. See also “Forward-Looking Statements” on page 2. Discussions of 2020 items and year-to-year comparisons of 2020 and 2019 that are not included in this Form 10-K can be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7 of our Annual Report on Form 10-K for the year ended December 31, 2020, which Item is incorporated herein by reference.

Overview

Marine Products, through our wholly owned subsidiaries Chaparral and Robalo, is a leading manufacturer of recreational fiberglass powerboats. Our sales and profits are generated by selling the products that we manufacture to a network of independent dealers who in turn sell the products to retail consumers. These dealers are located throughout the continental United States and in several international markets. Dealers either remit payment upon receipt of the product or finance their inventory through third-party floor plan lenders, who pay Marine Products generally within ten days of delivery of the products to the dealers.

We manage our Company by focusing on the execution of the following business and financial strategies:

In executing these strategies and attempting to optimize our financial returns, management closely monitors dealer orders and inventories, the production mix of various models, and indications of near term demand such as consumer confidence, evolving customer preferences for socially distanced recreational activities, interest rates, dealer orders placed at our annual dealer conferences, and retail attendance and orders at annual winter boat show exhibitions and through virtual marketing events. We also consider trends related to certain key financial and other data, including our historical and forecasted financial results, market share, unit sales of our products, average selling price per boat, and gross profit margins, among others, as indicators of the success of our strategies. Marine Products’ financial results are affected by consumer confidence and preferences, because pleasure boating is a discretionary

21

​

expenditure and consumers have many competing activities for their leisure time. Pleasure boating is also impacted by interest rates, the availability of financing and shifting consumer preferences towards safe activities which do not involve large crowds.

During 2021, aggregate retail sales of the boating segments in which Marine Products operates decreased by approximately 14.2 percent. Retail sales of outboard and sterndrive boats decreased during the year, although sales of inboard boats increased slightly. Our consolidated net sales increased in 2021 compared to 2020 due to a 12.9 percent increase in unit sales coupled with a 10.7 percent increase in the average gross selling price per boat. Management will continue to monitor retail demand among the various segments in the recreational boat market, the actions of our competitors, dealer inventory levels and the availability of dealer and consumer financing for the purchase of our products and adjust our production levels as deemed appropriate.

We periodically monitor our market share in the 19 to 34 foot sterndrive category as one indicator of the success of our strategies and the market’s acceptance of our products. For the 12 month period ended September 30, 2021 (latest data available to us), Chaparral’s market share in the 19 to 34 foot sterndrive category was 19.4 percent, an increase in comparison to the prior year same period, the second highest market share in this category during this period. For the 12-month period ended September 30, 2021, Robalo’s share of the 18 to 36 foot outboard sport fishing boat market was 4.8 percent, the second highest market share within this category. Marine Products Corporation’s share of the outboard recreational market, including both Robalo and Chaparral’s outboard units, was 6.3 percent of the total market within its size range for the 12 months ended September 30, 2021. Moreover, the Company held the second highest share among manufacturers of various outboard brands during the period. We will continue to monitor our market share and believe it to be important, but we believe that maximizing profitability takes precedence over growing our market share. Furthermore, as we continue to expand the breadth of our product offerings within our core category and new categories, we consider our overall market share across the various powerboat categories to be of greater importance to the long-term health of our company than our market share within any specific type of recreational boat.

Outlook

We believe that the strong retail demand for new recreational boats which began during the second quarter of 2020 and throughout 2021 will continue during 2022 because of the ongoing impact on consumer preferences caused by the COVID-19 pandemic. The Company believes that recreational boating’s appeal to U.S. consumers has grown because people perceive it to be a safe outdoor activity which does not involve large groups of people. Beginning in the second quarter of 2020, many consumers chose recreational boating when they left urban areas to spend time in vacation homes or in smaller groups, often located near recreational bodies of water. We believe that continued retail demand resulting from this change in consumer preferences will endure during the foreseeable future.

In spite of strong retail demand, preliminary industry data indicate that 2021 retail sales declined slightly compared to retail sales in 2020. The Company believes that this decline was caused by sales from available dealer inventories during 2020 and the industry’s supply chain and labor problems which prevented recreational boat manufacturers from producing sufficient units in 2021 to meet retail and dealer demand. The overall cost of boat ownership has increased over the last several years. In particular, the cost of boat ownership has increased during 2021 as materials and labor costs have increased and boat manufacturers have passed these cost increases to dealers and retail customers. In addition, the price of fuel has increased during 2021. The higher cost of boat ownership may discourage consumers from purchasing recreational boats. For years, Marine Products and other boat manufacturers have been improving their customer service capabilities, marketing strategies and sales promotions to attract more consumers to recreational boating as well as improve consumers’ boating experiences. The Company provides financial incentives to its dealers for receiving favorable customer satisfaction surveys. In addition, the recreational boating industry conducts a promotional program which involves advertising and consumer targeting efforts, as well as other activities designed to increase the potential consumer market for pleasure boats. Many manufacturers, including Marine Products, participate in this program. Management believes that these efforts have incrementally benefited the industry and Marine Products. Marine Products reduced the number of models in its portfolio for the 2022 model year, which began in the third quarter of 2021, in order to increase production efficiency. In addition, the Company has increased the average size of the models that it is producing during the 2022 model year in response to evolving retail demand and the changes to the model portfolio. In a typical year, Marine Products and its dealers present our new models to retail customers during the winter boat show season, which takes place during the fourth and first calendar quarters. There will be a limited number of winter boat shows during the first quarter of 2022 due to ongoing pandemic-related restrictions, but we plan to attend shows that are conducted, and we are encouraging our dealers to attend as well. We plan to continue to develop and produce additional new products for subsequent model years.

22

​

Due to strong demand across the recreational sector, key materials and components are in tight supply. Supply chain disruptions impacted our production and sales during 2021, and we believe that these disruptions will continue to impact our production and sales in the first quarter of 2022 and possibly for additional quarters. In addition, supply chain disruptions have caused a significant increase in our inventories on hand during 2021 due to insufficient critical components needed to adequately complete boats prior to shipment. At the present time, we do not know when these problems will be resolved, so we are concentrating on production scheduling that will manage to decrease our inventory levels to the extent possible.

Our financial results during 2022 will depend on a number of factors, including our ability to meet dealer and consumer demand in the face of ongoing supply chain disruptions which have impacted our manufacturing operations, the health of American consumers and economic recovery from the pandemic, and potential changes in consumer behavior as society recovers from the pandemic. Additional factors that could impact our results include interest rates, the availability of credit to our dealers and consumers, fuel costs, the continued acceptance of our new products in the recreational boating market, the near-term effectiveness of our marketing efforts, the availability and cost of labor and certain of our raw materials and key components used in manufacturing our products.

​

Results of Operations

​

Year Ended December 31, 2021 Compared to Year Ended December 31, 2020

Net Sales. Marine Products’ net sales increased by $58.2 million or 24.3 percent in 2021 compared to 2020. The increase was primarily due to a 12.9 percent increase in the number of boats sold, as well as an increase in parts and accessories sales, coupled with a 10.7 percent increase in the average gross selling price per boat. Unit sales increased in the majority of our product lines during 2021 compared to the prior year as we worked to overcome significant supply chain difficulties and meet as much dealer and retail demand as possible. In addition, Marine Products sales in 2020 were negatively impacted by the suspension of manufacturing operations for five weeks during the second quarter of 2020 due to concerns over the potential spread of COVID-19. Average selling prices increased compared to the prior year primarily due to a favorable model mix and reduced incentive costs, coupled with model year and other price increases implemented during the fourth quarter of 2021. Domestic net sales were $282.1 million, an increase of 23.7 percent compared to the prior year. International sales increased 35.5 percent during 2021 compared to 2020 due primarily to higher sales in Canada, partially offset by lower sales in other countries outside of North America due in part to continued tariffs imposed on boat imports including the United Kingdom, the European Union and Mexico.

Cost of Goods Sold. Cost of goods sold increased 23.4 percent in 2021 compared to 2020 consistent with the increase in net sales. As a percentage of net sales, cost of goods sold decreased to 77.1 percent in 2021 compared to 77.6 percent in 2020 primarily due to a favorable model mix and model year price increases during 2021 compared to the prior year, partially offset by higher materials costs and less efficient production due to supply chain disruptions as compared to the prior year.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased by 9.0 percent in 2021 compared to 2020 primarily due to an increase in costs that vary with sales and profitability, such as incentive compensation, sales commissions and warranty expense. This increase was partially offset by lower costs in the current year as a result of a reduction in deferred compensation expense associated with the accelerated vesting of restricted stock due to the death of the Company’s Chairman in the third quarter of 2020 coupled with a non-cash pension settlement loss of $647 thousand recorded during the fourth quarter of 2020. Selling, general and administrative expenses as a percentage of net sales were 10.7 percent in 2021 compared to 12.2 percent in 2020. Although these expenses increased during 2021 as compared to the same period of the prior year, they decreased as a percentage

23

​

of net sales due to leverage of higher sales over expenses that are relatively fixed during the short term. As a percentage of net sales, warranty expense was 1.2 percent in both 2021 and 2020.

Interest Income. Interest income decreased to $16 thousand in 2021 compared to $95 thousand in 2020. Marine Products generated interest income in 2021 primarily from investments in money market funds. This decrease was primarily due a decrease in the average balance of cash and cash equivalents.

Income Tax Provision. The income tax provision increased to $7.4 million in 2021 compared to $5.0 million in 2020. The effective tax rate was 20.3 percent in 2021 compared to 20.5 percent in 2020.

Liquidity and Capital Resources

Cash and Cash Flows

The Company’s cash and cash equivalents were $14.1 million at December 31, 2021, $31.6 million at December 31, 2020 and $19.8 million at December 31, 2019. The following table sets forth the historical cash flows for the twelve months ended December 31:

​

Cash provided by operating activities in 2021 of $0.5 million includes net income of $29.0 million partially offset by a net unfavorable change in the primary components of our working capital (accounts receivable, inventories and accounts payable) of $28.8 million due primarily to a significant increase in inventories due to increased production and supply chain disruptions of critical components needed to complete boats, partially offset by decrease in accounts receivable due to receipt of a state tax incentive refund in 2021 and an increase in accounts payable consistent with higher production. This unfavorable change was coupled with a decrease of $4.3 million in other accrued expenses due to the timing of payments, partially offset by an increase of $3.0 million in other long-term liabilities related to the supplemental retirement plan.

Cash used for investing activities in 2021 was $1.2 million compared to $2.1 million for the same period in 2020. This favorable change is primarily due to a decrease in capital expenditures in 2021 in comparison to the same period of the prior year.

Cash used for financing activities in 2021 increased $0.6 million compared to 2020 primarily due to increased dividends per share paid to common shareholders, partially offset by a reduction in the cost of open market repurchases in 2021 compared to 2020.

Cash Requirements

Management expects that capital expenditures during 2022 will be approximately $4.2 million.

The Company participates in a multiple employer Retirement Income Plan, sponsored by RPC. The Company did not make any cash contributions to this plan in 2021. During the fourth quarter of 2021, the Company initiated actions to terminate the defined benefit pension plan and as such the year-end pension obligation has been valued on a termination basis. Specifically, the actuaries utilized an approach based on their experience with other plan terminations that (i) estimated a take rate for lump sums; (ii) for those participants electing a lump-sum, calculated the amount using the November 2021 IRS segment rates and (iii) for those participants with annuities purchased, calculated the amount using estimated insurance settlement rates. We do not currently expect the Company to make any contributions to the Retirement Income Plan in 2022.

On January 25, 2022, the Board of Directors approved a quarterly cash dividend of $0.12 per common share payable March 10, 2022 to stockholders of record at the close of business on February 10, 2022.

The Company has a contractual agreement with one employee that provides for a monthly payment equal to 10 percent of profits (defined as pretax income before goodwill amortization and certain allocated corporate expenses).

24

​

In January 2008, the Board of Directors authorized an additional 3,000,000 shares that the Company may repurchase for a total aggregate authorization of 8,250,000 shares. The Company did not repurchase shares in 2021 and repurchased 97,940 shares in the open market during 2020. Shares remaining available for repurchase under this program total 1,570,428.

The Company has entered into agreements with third-party floor plan lenders where it has agreed, in the event of default by a qualifying dealer, to repurchase MPC boats repossessed from the dealer. These arrangements are subject to maximum repurchase amounts and the associated risk is mitigated by the value of the boats repurchased. The Company had no repurchases of dealer inventory in 2021 and 2020. See further information regarding repurchase obligations in “NOTE 11: COMMITMENTS AND CONTINGENCIES” of the Consolidated Financial Statements which is incorporated herein by reference.

The Company believes that the liquidity provided by existing cash, cash equivalents and marketable securities, its overall strong capitalization, cash generated by operations and the Company’s ability to sell up to approximately $150 million in shares of its common stock under the Company’s shelf registration statement will provide sufficient capital to meet the Company’s requirements for at least the next twelve months. The Company’s decisions about the amount of cash to be used for investing and financing purposes are influenced by its capital position and the expected amount of cash to be provided by operations. The Company has a revolving line of credit facility to increase its flexibility for managing its investment in its working capital.

On November 12, 2021, the Company obtained a $20 million revolving credit facility that matures November 2026. The facility contains customary terms and conditions, including restrictions on indebtedness, dividend payments, business combinations and other related items. The facility includes (i) a $5 million sublimit for swingline loans, (ii) a $2.5 million aggregate sublimit for all letters of credit, and (iii) a committed accordion which can increase the aggregate commitments by the greater of $35 million and EBITDA over the most recently completed twelve month period at the time of incurrence. As of December 31, 2021, the Company had no outstanding borrowings under the revolving credit agreement. For additional information with respect to MPC’s facility, see Note 7 of the consolidated financial statements included in this report and which is incorporated herein by reference.

Contractual Obligations

The Company’s obligations and commitments that require future payments include our credit facility, certain non-cancelable operating leases, amounts related to the usage of corporate aircraft and other long-term liabilities. For additional information with respect to MPC’s contractual obligations, see Note 7, Long-term debt, and Note 14, Leases, of the consolidated financial statements included in this report and which is incorporated herein by reference.

Fair Value Measurements

The Company’s assets and liabilities measured at fair value are classified in the fair value hierarchy (Level 1, 2 or 3) based on the inputs used for valuation. Assets and liabilities that are traded on an exchange with a quoted price are classified as Level 1. Assets and liabilities that are valued using significant observable inputs in addition to quoted market prices are classified as Level 2. The Company currently has no assets or liabilities measured on a recurring basis that are valued using unobservable inputs and therefore no assets or liabilities measured on a recurring basis are classified as Level 3. For defined benefit plan and Supplemental Executive Retirement Plan (“SERP”) investments measured at net asset value, the values are computed using inputs such as cost, discounted future cash flows, independent appraisals and market based comparable data or on net asset values calculated by the investment fund and not publicly available.

Off Balance Sheet Arrangements

To assist dealers in obtaining financing for the purchase of their boats for inventory, the Company has entered into agreements with various third-party floor plan lenders whereby the Company guarantees varying amounts of debt for qualifying dealers on boats in dealer inventory. The Company’s obligation under these guarantees becomes effective in the case of a default under the financing arrangement between the dealer and the third-party lender. The agreements typically provide for the return of all repossessed boats in “new and unused” condition subject to normal wear and tear, as defined, to the Company, in exchange for the Company’s assumption of specified percentages of the debt obligation on those boats, up to certain contractually determined dollar limits which vary by lender. The Company had no repurchases of dealer inventory under contractual agreements during 2021 and 2020.

25

​

Management continues to monitor the risk of additional defaults and resulting repurchase obligations based primarily upon information provided by the third-party floor plan lenders and to adjust the guarantee liability at the end of each reporting period based on information reasonably available at that time. As of December 31, 2021, the Company believes the fair value of its guarantee liability is immaterial. See further information regarding repurchase obligations in “NOTE 11: COMMITMENTS AND CONTINGENCIES” of the Consolidated Financial Statements which is incorporated herein by reference.

The Company currently has an agreement with one of the floor plan lenders whereby the contractual repurchase obligation is limited to a maximum of 16 percent of the average net receivables financed by the floor plan lender for dealers during the prior 12 month period, which was $4.1 million as of December 31, 2021. The Company has contractual repurchase agreements with additional lenders with an aggregate maximum repurchase obligation of $2.4 million, with various expiration and cancellation terms of less than one year. Accordingly, the aggregate repurchase obligation with all financing institutions is $6.5 million as of December 31, 2021. Although the Company has these agreements with financial institutions, in certain situations, the Company may decide for business reasons to repurchase boats in excess of these contractual amounts.

Related Party Transactions

See “NOTE 13: RELATED PARTY TRANSACTIONS” of the Consolidated Financial Statements, which is incorporated herein by reference, for a description of related party transactions.

Critical Accounting Policies and Estimates

The consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America, which require significant judgment by management in selecting the appropriate assumptions for calculating accounting estimates. These judgments are based on our historical experience, terms of existing contracts, trends in the industry, and information available from other outside sources, as appropriate. Senior management has discussed the development, selection and disclosure of its critical accounting policies that require significant judgments or estimates with the Audit Committee of our Board of Directors. The Company believes that, of its significant accounting policies and estimates, the following may involve a higher degree of judgment and complexity.

Sales recognition - The Company sells its boats through its network of independent dealers and recognizes revenues from contracts with its customers based on the consideration received in exchange for the goods sold. Revenue is recognized when obligations under the terms of a contract with our customer are satisfied. Satisfaction of contract terms occur with the transfer of title of our boats, accessories, and parts to our dealers. Net sale is measured as the amount of consideration we expect to receive in exchange for transferring the goods to the dealer and consists of the sales price adjusted for dealer incentives.

Sales incentives and discounts – The Company records incentives as a reduction of sales or as a cost of sales as appropriate. Using historical trends and management estimates, adjusted for current changes, the Company estimates the amount of incentives that will be paid in the future on boats sold and accrues an estimated liability. The Company offers various incentives that promote sales to dealers, and to a lesser extent, retail customers. These incentives are designed to encourage timely replenishment of dealer inventories after peak selling seasons, stabilize manufacturing volumes throughout the year, and improve production model mix. The dealer incentive programs are a combination of annual volume commitment discounts, and additional discounts at time of invoice for those dealers who do not finance their inventory through specified floor plan financing agreements. The annual dealer volume discounts are primarily based on July 1 through June 30 model year purchases. In addition, the Company offers at various times other time-specific or model-specific incentives.

The factors that complicate the calculation of the cost of these incentives are the ability to forecast sales of the Company and individual dealers, the volume and timing of inventory financed by specific dealers, identification of which boats have been sold subject to an incentive, and the estimated lag time between sales and payment of incentives. Settlement of the incentives generally occurs from three to twelve months after the sale. The Company regularly analyzes the historical incentive trends and adjusts recorded liabilities for changes in trends and terms of incentive programs. Total cost of incentives recorded in net sales as a percentage of gross sales was 5.8 percent in 2021, 6.7 percent in 2020, and 7.0 percent in 2019. A 0.25 percentage point change in cost of incentives as a percentage of gross sales during 2021 would have increased or decreased net sales, gross margin and operating income by approximately $0.6 million.

26

​

Warranty costs -The Company records as part of selling, general and administrative expenses an experience-based estimate of the future warranty costs to be incurred when sales are recognized. The Company evaluates its warranty obligation for each product line on a model year basis. The Company provides warranties against manufacturing defects for various components of the boats, primarily the fiberglass deck and hull, with warranty periods extending up to a lifetime. Warranty costs, if any, on other components of the boats are generally absorbed by the original component manufacturer. Warranty costs can vary depending upon the size and number of components in the boats sold, the pre-sale warranty claims, and the desired level of customer service. While we focus on high quality manufacturing programs and processes, including actively monitoring the quality of our component suppliers and managing the dealer and customer service warranty experience and reimbursements, our estimated warranty obligation is based upon the warranty terms and the Company’s enforcement of those terms over time, manufacturing defects or issues, repair costs, and the volume and mix of boat sales. The estimate of warranty costs is regularly analyzed and is adjusted based on several factors including the actual claims that occur. Warranty expense as a percentage of net sales was 1.2 percent in 2021 and 2020, and 1.3 percent in 2019. A 0.10 percentage point increase in the estimated warranty expense as a percentage of net sales during 2021 would have increased selling, general and administrative expenses and reduced operating income by approximately $0.3 million.

Impact of Recent Accounting Pronouncements:

See “NOTE 1: SIGNIFICANT ACCOUNTING POLICIES” of the Consolidated Financial Statements, which is incorporated herein by reference, for a description of recent accounting pronouncements, including the expected dates of adoption and expected effects on results of operations and financial condition, if known.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Marine Products holds no derivative financial instruments which could expose the Company to significant market risk. Marine Products maintains investments primarily in money market funds which are not subject to material interest rate risk exposure. Marine Products does not expect any material changes in market risk exposures or how those risks are managed.

​

​

27

​

MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

To the Stockholders of Marine Products Corporation:

The management of Marine Products Corporation is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. Marine Products Corporation maintains a system of internal accounting controls designed to provide reasonable assurance, at a reasonable cost, that assets are safeguarded against loss or unauthorized use and that the financial records are adequate and can be relied upon to produce financial statements in accordance with accounting principles generally accepted in the United States of America. The internal control system is augmented by written policies and procedures, an internal audit program and the selection and training of qualified personnel. This system includes policies that require adherence to ethical business standards and compliance with all applicable laws and regulations.

There are inherent limitations to the effectiveness of any controls system. A controls system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the controls system are met. Also, no evaluation of controls can provide absolute assurance that all control issues and any instances of fraud, if any, within the Company will be detected. Further, the design of a controls system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. The Company intends to continually improve and refine its internal controls.

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of the design and operations of our internal control over financial reporting, as of December 31, 2021 based on criteria established in 2013 Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, management’s assessment is that Marine Products Corporation maintained effective internal control over financial reporting as of December 31, 2021.

The independent registered public accounting firm, Grant Thornton LLP, has audited the consolidated financial statements as of and for the year ended December 31, 2021, and has also issued their report on the effectiveness of the Company’s internal control over financial reporting, included in this report on page 29.

​

Atlanta, Georgia

February 28, 2022

​

​

28

​

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

Marine Products Corporation

Opinion on internal control over financial reporting

We have audited the internal control over financial reporting of Marine Products Corporation (a Delaware corporation) and subsidiaries (the “Company”) as of December 31, 2021, based on criteria established in the 2013 Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2021, based on criteria established in the 2013 Internal Control—Integrated Framework issued by COSO.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the consolidated financial statements of the Company as of and for the year ended December 31, 2021, and our report dated February 28, 2022 expressed an unqualified opinion on those financial statements.

Basis for opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management's Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and limitations of internal control over financial reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ GRANT THORNTON LLP

We have served as the Company’s auditor since 2004.

Atlanta, Georgia

February 28, 2022

​

29

​

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

Marine Products Corporation

Opinion on the financial statements

We have audited the accompanying consolidated balance sheets of Marine Products Corporation (a Delaware corporation) and subsidiaries (the “Company”) as of December 31, 2021 and 2020, the related consolidated statements of operations, comprehensive income, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2021, and the related notes and financial statement schedule under Item 15(2) (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021, in conformity with accounting principles generally accepted in the United States of America.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the Company’s internal control over financial reporting as of December 31, 2021, based on criteria established in the 2013 Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”), and our report dated February 28, 2022 expressed an unqualified opinion.

Basis for opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical audit matter

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing separate opinions on the critical audit matter or on the accounts or disclosures to which it relates.

Accrued Warranty Claims

As described further in Note 1 to the consolidated financial statements, the Company provides a lifetime limited structural hull warranty, a five-year structural deck warranty, and a one-year limited warranty to the original owner for all boats sold to dealers. The cost of these warranty claims is recorded by the Company at the time of the boat sale based on historical claims experience and may subsequently be adjusted based on items such as production quality. We identified accrued warranty claims ("warranty") as a critical audit matter.

The principal consideration for our determination that warranty is a critical audit matter is that the accrual for warranty claims has a higher degree of estimation uncertainty related to the estimation of anticipated future warranty claims. The estimation

30

​

uncertainty and subjectivity in determining the accrual resulted in the need for significant auditor judgement when assessing the reasonableness of the inputs and assumptions utilized by the Company.

Our audit procedures related to this matter included the following, among others.

​

/s/ GRANT THORNTON LLP

We have served as the Company’s auditor since 2004.

Atlanta, Georgia

February 28, 2022

​

​

​

31

​

Item 8. Financial Statements and Supplementary Data

CONSOLIDATED BALANCE SHEETS

MARINE PRODUCTS CORPORATION AND SUBSIDIARIES

(in thousands except share information)

​

The accompanying notes are an integral part of these statements.

​

32

​

CONSOLIDATED STATEMENTS OF OPERATIONS

MARINE PRODUCTS CORPORATION AND SUBSIDIARIES

(in thousands except per share data)

​

The accompanying notes are an integral part of these statements.

​

33

​

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

MARINE PRODUCTS CORPORATION AND SUBSIDIARIES

(in thousands)

​

The accompanying notes are an integral part of these statements.

​

34

​

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

MARINE PRODUCTS CORPORATION AND SUBSIDIARIES

(in thousands)

​

The accompanying notes are an integral part of these statements.

​

35

​

CONSOLIDATED STATEMENTS OF CASH FLOWS

MARINE PRODUCTS CORPORATION AND SUBSIDIARIES

(in thousands)

​

The accompanying notes are an integral part of these statements.

​

​

36

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Marine Products Corporation and Subsidiaries

Years ended December 31, 2021, 2020 and 2019

NOTE 1: SIGNIFICANT ACCOUNTING POLICIES

Basis of Consolidation and Presentation — The consolidated financial statements include the accounts of Marine Products Corporation (a Delaware corporation) and its wholly owned subsidiaries (“Marine Products” or the “Company”).

The consolidated financial statements included herein may not necessarily be indicative of the future results of operations, financial position and cash flows of Marine Products.

The Company has one reportable segment — its Powerboat Manufacturing business. The Company’s results of operations and its financial condition are not significantly reliant upon any single customer or product model. No single dealer accounted for 10 percent or more of net sales during 2021, 2020 or 2019. Net sales to the Company’s international dealers were approximately $15.9 million in 2021, $11.8 million in 2020, and $17.0 million in 2019.

Common Stock — Marine Products is authorized to issue 74,000,000 shares of common stock, $0.10 par value. Holders of common stock are entitled to receive dividends when, as, and if declared by our Board of Directors out of legally available funds. Each share of common stock is entitled to one vote on all matters submitted to a vote of stockholders. Holders of common stock do not have cumulative voting rights. In the event of any liquidation, dissolution or winding up of the Company, holders of common stock are entitled to ratable distribution of the remaining assets available for distribution to stockholders.

Preferred Stock — Marine Products is authorized to issue up to 1,000,000 shares of preferred stock, $0.10 par value. As of December 31, 2021, there were no shares of preferred stock issued. The Board of Directors is authorized, subject to any limitations prescribed by law, to provide for the issuance of preferred stock as a class without series or, if so determined from time to time, in one or more series, and by filing a certificate pursuant to the applicable laws of the state of Delaware and to fix the designations, powers, preferences and rights, exchangeability for shares of any other class or classes of stock. Any preferred stock to be issued could rank prior to the common stock with respect to dividend rights and rights on liquidation.

Share Repurchases — The Company records the cost of share repurchases in stockholders’ equity as a reduction to common stock to the extent of par value of the shares acquired and the remainder is allocated to capital in excess of par value and retained earnings if capital in excess of par value is depleted. The Company tracks capital in excess of par value on a cumulative basis and for each reporting period, discloses the excess over capital in excess of par value as part of stock purchased and retired in the consolidated statements of stockholders’ equity.

Dividend — On January 25, 2022, the Board of Directors declared a regular cash dividend of $0.12 per share payable March 10, 2022 to stockholders of record at the close of business on February 10, 2022. Subject to industry conditions and Marine Products’ earnings, financial condition, and other relevant factors, the Company expects to continue to pay regular quarterly cash dividends to common stockholders.

Use of Estimates in the Preparation of Financial Statements — The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of sales and expenses during the reporting period. Actual results could differ from those estimates. Significant estimates are used in the determination of sales, sales incentives and discounts, and warranty costs.

Sales Recognition — Marine Products recognizes revenues from contracts with its customers based on the amount of consideration it receives in exchange for the goods sold. See Note 2 for additional information.

Advertising — Advertising expenses are charged to expense during the period in which they are incurred. Expenses associated with product brochures and other inventoriable marketing materials are deferred and amortized over the related model year which approximates the consumption of these materials. The Company had prepaid expenses related to unamortized product brochure costs of $132,000 as of December 31, 2021 and $194,000 as of December 31, 2020. Advertising expenses totaled approximately $1,645,000 in 2021, $2,013,000 in 2020 and $2,543,000 in 2019 and are recorded in selling, general and administrative expenses.

37

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Marine Products Corporation and Subsidiaries

Years ended December 31, 2021, 2020 and 2019

Cash and Cash Equivalents — Highly liquid investments with original maturities of three months or less when acquired are considered to be cash equivalents. The Company maintains its cash in bank accounts, which at times, may exceed federally insured limits.

Accounts Receivable — The majority of the Company’s accounts receivable is due from dealers located in markets throughout the United States. Approximately 51 percent of Marine Products’ domestic shipments are made pursuant to “floor plan financing” programs in which Marine Products’ subsidiaries participate on behalf of their dealers with various major third-party financing institutions. Under these arrangements, a dealer establishes lines of credit with one or more of these third-party lenders for the purchase of boat inventory for sales to retail customers in their show room or during boat show exhibitions. When a dealer purchases and takes delivery of a boat pursuant to a floor plan financing arrangement, it draws against its line of credit and the lender pays the invoice cost of the boat directly to Marine Products within approximately ten business days. The Company determines its credit loss allowance by considering a number of factors, including the length of time trade accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation to the Company, and the condition of the general economy and the industry as a whole. The Company writes-off accounts receivable when they become uncollectible, and payments subsequently received on such receivables are credited to the allowance.

Inventories — Inventories are stated at the lower of cost (determined on a first-in, first-out basis) and net realizable value. When evidence exists that the net realizable value of inventory is lower than its cost, the Company recognizes the difference as a loss in earnings in the period in which it occurs. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation.

Property, Plant and Equipment — Property, plant and equipment is carried at cost. Depreciation is provided principally on a straight-line basis over the estimated useful lives of the assets. The cost of assets retired or otherwise disposed of and the related accumulated depreciation are eliminated from the accounts in the year of disposal with the resulting gain or loss credited or charged to income. Expenditures for additions, major renewals, and betterments are capitalized while expenditures for routine maintenance and repairs are expensed as incurred. Depreciation expense on operating equipment used in production is included in cost of goods sold in the accompanying consolidated statements of operations. All other depreciation is included in selling, general and administrative expenses in the accompanying consolidated statements of operations. Property, plant and equipment are reviewed for impairment when indicators of impairment exist.

Goodwill and Other Intangibles — Intangibles consist primarily of goodwill and trade names related to businesses acquired. Goodwill represents the excess of the purchase price over the fair value of net assets of businesses acquired. The carrying amount of goodwill was $3,308,000 as of December 31, 2021 and 2020. The Company evaluates whether goodwill is impaired by comparing its market capitalization based on its closing stock price (Level 1 input) to the book value of its equity on the annual evaluation date. The Company also periodically performs a valuation of its trade names and has concluded that the fair value of these assets is not impaired. Based on these evaluations, the Company concluded that no impairment of its goodwill or trade names has occurred for the years ended December 31, 2021, 2020 and 2019.

Investments — The Company maintains certain securities in the non-qualified Supplemental Executive Retirement Plan that have been classified as trading. See Note 12 for further information regarding these securities.

38

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Marine Products Corporation and Subsidiaries

Years ended December 31, 2021, 2020 and 2019

Warranty Costs — The Company provides a lifetime limited structural hull warranty, a five-year limited structural deck warranty, and a transferable one-year limited warranty to the original owner. Warranties for additional items are provided for periods of one to five years and are not transferrable. Additionally, as it relates to the first subsequent owner, a five-year transferrable hull warranty and the remainder of the original one-year limited warranty on certain components are available. The five-year transferable hull warranty terminates five years after the date of the original retail purchase. Claim costs related to components are generally absorbed by the original component manufacturer. The Company accrues for estimated future warranty costs at the time of the sale based on its historical claims experience. An analysis of the warranty accruals for the years ended December 31, 2021 and 2020 is as follows:

​

​

Insurance Accruals — The Company fully insures its risks related to general liability, product liability and vehicle liability, whereas the health insurance plan up to a maximum annual claim amount for each covered employee and related dependents and workers’ compensation are self-funded. The estimated cost of claims under the self-insurance program is accrued as the claims are incurred and may subsequently be revised based on developments relating to such claims.

Research and Development Costs — The Company expenses research and development costs for new products and components as incurred. Research and development costs are included in selling, general and administrative expenses and totaled $776,000 in 2021, $751,000 in 2020, and $730,000 in 2019.

Repurchase Obligations — The Company has entered into agreements with third-party floor plan lenders where it has agreed, in the event of default by the dealer, to repurchase MPC boats repossessed from the dealer. These arrangements are subject to maximum repurchase amounts and the associated risk is mitigated by the value of the boats repurchased. The Company accrues estimated losses when a loss, due primarily to the default of one of our dealers, is determined to be probable and the amount of the loss can be reasonably estimated.

Income Taxes — Deferred tax liabilities and assets are determined based on the difference between the financial and tax bases of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to reverse. The Company establishes a valuation allowance against the carrying value of deferred tax assets if the Company concludes that it is more likely than not that the asset will not be realized through future taxable income.

Retirement Income Plan — Marine Products participates in the tax-qualified, defined benefit, noncontributory, trusteed retirement income plan sponsored by RPC, Inc. (“RPC”) that provides monthly benefits upon normal retirement at age 65, or reduced early retirement benefits at age 59 ½ or at age 55 or older with 15 or more years of service, to substantially all employees with at least one year of service prior to 2002. In 2002, RPC’s Board of Directors approved a resolution to cease all future retirement benefit accruals under the defined benefit pension plan. During the fourth quarter of 2021, the Company initiated actions to terminate the defined benefit pension plan. See Note 12 for a full description and status of this plan and the related accounting and funding policies.

Stock-Based Compensation — Stock-based compensation expense is recognized for all share-based payment awards, net of an estimated forfeiture rate. Thus, compensation cost is amortized for those shares expected to vest on a straight-line basis over the requisite service period of the award. See Note 12 for additional information.

Earnings per Share — Basic and diluted earnings per share are computed by dividing net income by the weighted average number of shares outstanding during the respective periods. In addition, the Company has periodically issued share-based payment awards that contain non-forfeitable rights to dividends and are therefore considered participating securities. See Note 12 for further information on restricted stock granted to employees.

39

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Marine Products Corporation and Subsidiaries

Years ended December 31, 2021, 2020 and 2019

Restricted shares of common stock (participating securities) outstanding and a reconciliation of weighted average shares outstanding is as follows:

​

​

Fair Value of Financial Instruments — The Company’s financial instruments consist primarily of cash and cash equivalents, accounts receivable, accounts payable and marketable securities. The carrying value of cash and cash equivalents, accounts receivable and accounts payable approximate their fair values because of the short-term nature of such instruments. The Company’s marketable securities are held in the non-qualified Supplemental Executive Retirement Plan (“SERP”) which are classified as trading securities. All of these securities are carried at fair value in the accompanying consolidated balance sheets. See Note 10 for further information regarding the fair value measurement of assets and liabilities.

Concentration of Suppliers — The Company has only four suppliers for the three types of engines it purchases. This concentration of suppliers could impact our sales and profitability in the event of a sudden interruption in the delivery of these engines.

Recent Accounting Pronouncements — The FASB issued the following Accounting Standards Updates (ASUs):

Recently Adopted Accounting Standards:

​

Accounting Standards Update (ASU) No. 2019-12 — Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes. The amendments in this ASU simplify the accounting for income taxes by removing the exceptions to the incremental approach for intra-period tax allocation in certain situations, requirement to recognize a deferred tax liability for a change in the status of a foreign investment, and the general methodology for computing income taxes in an interim period when year-to date loss exceeds the anticipated loss for the year. The amendments also simplify the accounting for income taxes with regard to franchise tax, evaluation of step up in the tax basis goodwill in certain business combinations, allocating current and deferred tax expense to legal entities that are not subject to tax and enacted change in tax laws or rates. The Company adopted these provisions in the first quarter of 2021, and the adoption did not have a material impact on its consolidated financial statements.

​

Recently Issued Accounting Standards Not Yet Adopted:

​

ASU No. 2020-04 — Reference Rate Reform (Topic 848). The amendments in this ASU, provides optional guidance for a limited time to ease the impact of the reference rate reform on financial reporting. The amendments, which are elective, provide expedients to contract modifications, affected by reference rate reform if certain criteria are met. The amendments apply only to contracts and hedging relationships that reference LIBOR or other reference rate that is expected to be discontinued due to reference rate reform. This ASU is effective as of March 12, 2020 through December 31, 2022 and may be applied to contract modifications and hedging relationships from the beginning of an interim period that includes or is subsequent to March 12, 2020. The Company will adopt these provisions when LIBOR is discontinued and does not expect adoption to have a material impact on its consolidated financial statements.

​

ASU No. 2021-08 — Business Combinations (Topic 805): Accounting for Contract Assets and Contract Liabilities from Contracts with Customers. The amendments in this ASU address diversity in practice related to the accounting for revenue contracts with customers acquired in a business combination, by adopting guidance requiring an acquirer to recognize and measure contract assets and contract liabilities acquired in a business combination in accordance with Topic 606. At the acquisition date, an acquirer would recognize and measure the acquired contract assets and contract liabilities in the same manner that they were

40

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Marine Products Corporation and Subsidiaries

Years ended December 31, 2021, 2020 and 2019

recognized and measured in the acquiree's financial statements before the acquisition. These amendments are effective beginning in the first quarter of 2023 with early implementation permitted and should be applied prospectively to business combinations occurring on or after January 1, 2023. The company is currently evaluating the impact of adopting these provisions on its consolidated financial statements.

​

​

NOTE 2: NET SALES

Accounting Policy - MPC’s contract revenues are generated principally from selling: (1) fiberglass motorized boats and accessories and (2) parts to independent dealers. Revenue is recognized when obligations under the terms of a contract with our customer are satisfied. Satisfaction of contract terms occur with the transfer of title of our boats, accessories, and parts to our dealers. Net sales are measured as the amount of consideration we expect to receive in exchange for transferring the goods to the dealer. The amount of consideration we expect to receive consists of the sales price adjusted for dealer incentives. The expected costs associated with our base warranties continue to be recognized as expense when the products are sold as they are deemed to be assurance-type warranties (see Note 1). Incidental promotional items that are immaterial in the context of the contract are recognized as expense. Fees charged to customers for shipping and handling are included in net sales in the accompanying consolidated statements of operations and the related costs incurred by the Company are included in cost of goods sold.

Nature of goods - MPC’s performance obligations within its contracts consists of: (1) boats and accessories and (2) parts. The Company transfers control and recognizes revenue on the satisfaction of its performance obligations (point in time) as follows:

Payment terms - For most domestic customers, MPC manufactures and delivers boats and accessories and parts ahead of payment - i.e., MPC has fulfilled its performance obligations prior to submitting an invoice to the dealer. MPC invoices the customer when the products are delivered and receives the related compensation, typically within seven to ten business days after invoicing. For some domestic customers and all international customers, MPC requires payment prior to transferring control of the goods. These amounts are classified as deferred revenue and recognized when control has transferred, which generally occurs within three months of receiving the payment.

When the Company enters into contracts with its customers, it generally expects there to be no significant timing difference between the date the goods have been delivered to the customer (satisfaction of the performance obligation) and the date cash consideration is received. Accordingly, there is no financing component to the Company’s arrangements with its customers.

Significant judgments

Determining the transaction price - The transaction price for MPC’s boats and accessories is the invoice price adjusted for dealer incentives. Key inputs and assumptions utilized in determining variable consideration related to dealer incentives include:

Other - Our contracts with dealers do not provide them with a right of return. Accordingly, we do not have any obligations recorded for returns or refunds.

41

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Marine Products Corporation and Subsidiaries

Years ended December 31, 2021, 2020 and 2019

Disaggregation of revenues

The following table disaggregates our sales by major source:

​

​

The following table disaggregates our revenues between domestic and international:

​

​

Timing of revenue recognition for each of the periods presented is shown below:

​

​

Contract balances -Amounts received from international and certain domestic dealers toward the purchase of boats are classified as deferred revenue and are included in accrued expenses and other liabilities on the Consolidated Balance Sheets.

​

​

Substantially all of the amounts of deferred revenue as of December 31, 2021 and December 31, 2020 were recognized as sales during the immediately following quarters, when control transferred.

​

NOTE 3: ACCOUNTS RECEIVABLE

Accounts receivable consist of the following:

​

​

Trade receivables consist primarily of balances related to the sales of boats which are shipped pursuant to “floor-plan financing” programs with qualified lenders. Other receivables consist primarily of rebate receivables from various suppliers in 2021 and 2020 and also a state incentive receivable in 2020. Changes in the Company’s allowance for credit losses are disclosed in Schedule II on page 62 of this report.

​

42

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Marine Products Corporation and Subsidiaries

Years ended December 31, 2021, 2020 and 2019

NOTE 4: INVENTORIES

Inventories consist of the following:

​

​

The Company’s inventories have increased significantly in 2021 compared to the prior year due to insufficient critical components needed to adequately complete boats prior to shipment as a result of supply chain disruptions.

​

NOTE 5: PROPERTY, PLANT AND EQUIPMENT

Property, plant and equipment are presented at cost, net of accumulated depreciation, and consist of the following:

​