Annual Statements Open main menu

ONTO INNOVATION INC. - Quarter Report: 2013 March (Form 10-Q)


 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D. C. 20549
___________________________ 
FORM 10-Q
_____________________________________ 

(Mark One)
x
Quarterly report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the quarterly period ended March 30, 2013
OR
o
Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the transition period from              to             
Commission file number 0-13470 
___________________________________
NANOMETRICS INCORPORATED
(Exact name of registrant as specified in its charter)
__________________________________ 
Delaware
 
94-2276314
(State or other jurisdiction of
incorporation or organization)
 
(I. R. S. Employer
Identification No.)
1550 Buckeye Drive, Milpitas, CA
 
95035
(Address of principal executive offices)
 
(Zip Code)
Registrant’s telephone number, including area code: (408) 545-6000 
___________________________________ 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  Q    No  £
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or such shorter period that the registrant was required to submit and post such file)    Yes  Q    No  £
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer," "accelerated filer," and "smaller reporting company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer
 
o
  
Accelerated filer
x
 
Non-accelerated filer
 
o (Do not check if a smaller reporting company)
  
Smaller reporting company
 o
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes   o  No  x
As of May 1, 2013 there were 23,112,394 shares of common stock, $0.001 par value, issued and outstanding.


Table of Contents

NANOMETRICS INCORPORATED
INDEX TO QUARTERLY REPORT ON FORM 10-Q
FOR QUARTER ENDED MARCH 30, 2013
 
 
 
 
Page
 
 
 
 
 
Item 1.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Item 2.
 
 
 
 
 
Item 3.
 
 
 
 
 
Item 4.
 
 
 
 
 
 
 
Item 1.
 
 
 
 
 
Item 1A.
 
 
 
 
 
Item 2.
 
 
 
 
 
Item 6.
 
 
 
 
 


2

Table of Contents

PART I — FINANCIAL INFORMATION
 
ITEM 1.
FINANCIAL STATEMENTS

NANOMETRICS INCORPORATED
CONDENSED CONSOLIDATED BALANCE SHEETS
(In thousands except share and per share amounts)
(Unaudited) 
 
March 30,
2013
 
December 29,
2012
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
47,345

 
$
62,915

Marketable securities
47,939

 
46,993

Accounts receivable, net of allowances of $90 and $82, respectively
19,747

 
21,388

Inventories
43,545

 
39,659

Inventories-delivered systems
1,524

 
2,274

Prepaid expenses and other
7,141

 
7,492

Deferred income tax assets
12,555

 
8,593

Total current assets
179,796

 
189,314

Property, plant and equipment, net
42,938

 
43,213

Goodwill
11,041

 
11,352

Intangible assets, net
9,938

 
10,980

Deferred income tax assets
3,591

 
3,671

Other assets
829

 
924

Total assets
$
248,133

 
$
259,454

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
6,362

 
$
6,398

Accrued payroll and related expenses
5,926

 
6,670

Deferred revenue
8,221

 
8,485

Other current liabilities
8,385

 
7,822

Income taxes payable
274

 
424

Current portion of debt obligations
945

 
928

Total current liabilities
30,113

 
30,727

Deferred revenue
3,746

 
4,307

Income taxes payable
2,280

 
2,135

Other long-term liabilities
2,011

 
2,140

Debt obligations
4,131

 
4,374

Total liabilities
42,281

 
43,683

Commitments and contingencies (Note 16)


 


Stockholders’ equity:
 
 
 
Preferred stock, $0.001 par value; 3,000,000 shares authorized; no shares issued or outstanding

 

Common stock, $0.001 par value, 47,000,000 shares authorized; 23,095,612 and 23,250,429, respectively, issued and outstanding
23

 
23

Additional paid-in capital
235,928

 
238,326

Accumulated deficit
(29,432
)
 
(23,850
)
Accumulated other comprehensive income
(667
)
 
1,272

Total stockholders’ equity
205,852

 
215,771

Total liabilities and stockholders’ equity
$
248,133

 
$
259,454

See Notes to Condensed Consolidated Financial Statements

3

Table of Contents

NANOMETRICS INCORPORATED
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands except per share amounts)
(Unaudited) 
 
Three Months Ended
 
March 30, 2013
 
March 31, 2012
Net revenues:
 
 
 
Products
$
13,079

 
$
47,858

Service
11,473

 
7,634

Total net revenues
24,552

 
55,492

Costs of net revenues:
 
 
 
Cost of products
7,960

 
24,819

Cost of service
5,448

 
4,970

Amortization of intangible assets
658

 
637

Total costs of net revenues
14,066

 
30,426

Gross profit
10,486

 
25,066

Operating expenses:
 
 
 
Research and development
7,447

 
7,476

Selling
6,932

 
7,211

General and administrative
5,512

 
6,081

Amortization of intangible assets
198

 
192

Total operating expenses
20,089

 
20,960

Income (loss) from operations
(9,603
)
 
4,106

Other income (expense)
 
 
 
Interest income
25

 
52

Interest expense
(226
)
 
(269
)
Other, net
40

 
(175
)
Total other expense, net
(161
)
 
(392
)
Income (loss) before income taxes
(9,764
)
 
3,714

Provision for (benefit from) income taxes
(4,182
)
 
2,011

Net income (loss)
$
(5,582
)
 
$
1,703

Net income (loss) per share:
 
 
 
Basic
$
(0.24
)
 
$
0.07

Diluted
$
(0.24
)
 
$
0.07

Shares used in per share calculation:
 
 
 
Basic
23,341

 
23,349

Diluted
23,341

 
23,981

See Notes to Condensed Consolidated Financial Statements

4

Table of Contents

NANOMETRICS INCORPORATED
CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(In thousands)
(Unaudited) 


 
Three Months Ended
 
March 30, 2013
 
March 31, 2012
Net income ( loss)
$
(5,582
)
 
$
1,703

Other comprehensive income (loss):
 
 
 
Change in foreign currency translation adjustment
(1,944
)
 
246

Net change on unrealized gains (losses) on available-for-sale investments
5

 

Other comprehensive income (loss)
(1,939
)
 
246

Comprehensive income (loss)
$
(7,521
)
 
$
1,949




5

Table of Contents

NANOMETRICS INCORPORATED
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
(Unaudited)
 
Three Months Ended

March 30,
2013
 
March 31,
2012
Cash flows from operating activities:
 
 
 
Net income (loss)
$
(5,582
)
 
$
1,703

Reconciliation of net income (loss) to net cash used in operating activities:
 
 
 
Depreciation and amortization
2,108

 
1,790

Stock-based compensation
1,457

 
1,461

Excess tax benefit from equity awards
367

 
(645
)
Loss on disposal of fixed assets
12

 
118

Inventory write down
1,321

 
806

Deferred income taxes
(4,065
)
 
2,468

Changes in fair value of contingent consideration
389

 
8

Changes in assets and liabilities:
 
 
 
Accounts receivable
1,268

 
(9,617
)
Inventories
(5,631
)
 
(713
)
Inventories-delivered systems
750

 
(61
)
Prepaid expenses and other
592

 
(2,337
)
Accounts payable, accrued and other liabilities
(351
)
 
(1,166
)
Deferred revenue
(796
)
 
2,731

Income taxes payable
(360
)
 
518

Net cash used in operating activities
(8,521
)
 
(2,936
)
Cash flows from investing activities:
 
 
 
Maturities of marketable securities
10,111

 

Purchases of marketable securities
(11,292
)
 

Purchases of property, plant and equipment
(997
)
 
(867
)
Net cash used in investing activities
(2,178
)
 
(867
)
Cash flows from financing activities:
 
 
 
          Payments of contingent consideration
(133
)
 
(107
)
          Repayments of debt obligations
(227
)
 
(186
)
          Proceeds from sale of shares under employee stock option plans and purchase plan
1,598

 
1,214

          Excess tax benefit from equity awards
(367
)
 
645

          Taxes paid on net issuance of stock awards
(86
)
 
(16
)
          Repurchases of common stock
(5,000
)
 

Net cash provided by (used in) financing activities
(4,215
)
 
1,550

Effect of exchange rate changes on cash and cash equivalents
(656
)
 
32

Net decrease in cash and cash equivalents
(15,570
)
 
(2,221
)
Cash and cash equivalents, beginning of period
62,915

 
97,699

Cash and cash equivalents, end of period
$
47,345

 
$
95,478

See Notes to Condensed Consolidated Financial Statements

6


NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Note 1. Nature of Business and Basis of Presentation

Description of Business – Nanometrics Incorporated (“Nanometrics” or the “Company”) and its wholly owned subsidiaries design, manufacture, market, sell and support thin film, optical critical dimension and overlay dimension metrology and inspection systems used primarily in the manufacturing of semiconductors, solar photovoltaics (“solar PV”) and high-brightness LEDs (“HB-LED”), as well as by customers in the silicon wafer and data storage industries. Nanometrics' metrology systems precisely measure a wide range of film types deposited on substrates during manufacturing to control manufacturing processes and increase production yields in the fabrication of integrated circuits. The thin film metrology systems use a broad spectrum of wavelengths, high-sensitivity optics, proprietary software, and patented technology to measure the thickness and uniformity of films deposited on silicon and other substrates as well as their chemical composition. The Company’s optical critical dimension technology is a patented critical dimension measurement technology that is used to precisely determine the dimensions on the semiconductor wafer that directly control the resulting performance of the integrated circuit devices. The overlay metrology systems are used to measure the overlay accuracy of successive layers of semiconductor patterns on wafers in the photolithography process. Nanometrics' inspection systems are used to find defects on patterned and unpatterned wafers at nearly every stage of the semiconductor production flow. The corporate headquarters of Nanometrics is located in Milpitas, California.
    
Basis of Presentation – The accompanying condensed consolidated financial statements ("financial statements") have been prepared on a consistent basis with the audited consolidated financial statements as of December 29, 2012, and include all adjustments necessary to fairly present the information set forth therein, which include only normal recurring adjustments. All significant intercompany accounts and transactions have been eliminated in consolidation.
The financial statements have been prepared in accordance with the regulations of the United States Securities and Exchange Commission (“SEC”) for interim periods in accordance with S-X Article 10, and, therefore, omit certain information and footnote disclosure necessary to present the statements in accordance with accounting principles generally accepted in the United States of America. The operating results for interim periods are not necessarily indicative of the operating results that may be expected for the entire year. These financial statements should be read in conjunction with the audited consolidated financial statements and notes thereto for the fiscal year ended December 29, 2012, which were included in the Company’s Annual Report on Form 10-K filed with the SEC on March 12, 2013.

Fiscal Period – The Company uses a 52/53 week fiscal year ending on the Saturday nearest to December 31. All references to the quarter refer to Nanometrics' fiscal quarter. The fiscal quarters presented herein include 13 weeks.

Reclassification – Certain prior year amounts have been reclassified to conform to the current year presentation.

Use of Estimates – The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reported period. Actual results could differ materially from those estimates. Estimates are used for, but not limited to, revenue recognition, the provision for doubtful accounts, the provision for excess, obsolete, or slow moving inventories, depreciation and amortization, valuation of intangible assets and long-lived assets, warranty accruals, income taxes, valuation of stock-based compensation, and contingencies.

Foreign Currency Translation – The assets and liabilities of foreign subsidiaries are translated from their respective functional currencies at exchange rates in effect at the balance sheet date and income and expense accounts are translated at average exchange rates during the reporting period. Resulting translation adjustments are reflected in “Accumulated other
comprehensive income,” a component of stockholders’ equity. Foreign currency transaction gains and losses are reflected in
“Other income (expense)” in the consolidated statements of operations in the period incurred and consists of a $0.1 million gain and a $0.2 million loss for the three-month periods ended March 30, 2013, and March 31, 2012, respectively.

Revenue Recognition – The Company derives revenue from the sale of process control metrology systems (“product revenue”) as well as spare part sales, billable service, service contracts, and upgrades (together “service revenue”). Upgrades are a group of parts and/or software that change the existing configuration of a product and are included in service revenue. They are distinguished from product revenue, which consists of complete, advanced process control metrology and inspection systems (the “system(s)”). Nanometrics' systems consist of hardware and software components that function together to deliver

7

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


the essential functionality of the system. Arrangements for sales of systems often include defined customer-specified acceptance criteria.

In summary, the Company recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the seller's price is fixed or determinable, and collectability is reasonably assured.

For product sales to existing customers, revenue recognition occurs at the time title and risk of loss transfer to the customer, which usually occurs upon shipment from the Company's manufacturing location, if it can be reliably demonstrated that the product has successfully met the defined customer specified acceptance criteria and all other recognition criteria has been met. For initial sales where the product has not previously met the defined customer specified acceptance criteria, product revenues are recognized upon the earlier of receipt of written customer acceptance or expiration of the contractual acceptance period. In Japan, where contractual terms with the customer specify risk of loss and title transfers upon customer acceptance, revenue is recognized upon receipt of written customer acceptance, provided that all other recognition criteria have been met.

The Company warrants its products against defects in manufacturing. Upon recognition of product revenue, a liability is recorded for anticipated warranty costs. On occasion, customers request a warranty period longer than the Company's standard warranty. In those instances where extended warranty services are separately quoted to the customer, the associated revenue is deferred and recognized as service revenue ratably over the term of the contract. The portion of service contracts and extended warranty services agreements that are uncompleted at the end of any reporting period are included in deferred revenue.

As part of its customer services, the Company sells software that is considered to be an upgrade to a customer's existing systems. These standalone software upgrades are not essential to the tangible product's functionality and are accounted for under software revenue recognition rules which require vendor specific objective evidence ("VSOE") of fair value to allocate revenue in a multiple element arrangement. Revenue from upgrades is recognized when the upgrades are delivered to the customer, provided that all other recognition criteria have been met.
    
Revenue related to spare parts is recognized upon shipment. Revenue related to billable services is recognized as the services are performed. Service contracts may be purchased by the customer during or after the warranty period and revenue is recognized ratably over the service contract period.

Frequently, the Company delivers products and various services in a single transaction. The Company's deliverables consist of tools, installation, upgrades, billable services, spare parts, and service contracts. The Company's typical multi-element arrangements include a sale of one or multiple tools that include installation and standard warranty. Other arrangements consist of a sale of tools bundled with service elements or it includes delivery of different types of services. The Company's tools, upgrades, and spare parts are delivered to customers within a period of up to six months from order date. Installation is usually performed soon after delivery of the tool. The portion of revenue associated with installation is deferred based on estimated fair value and that revenue is recognized upon completion of the installation. Billable services are billed on a time and materials basis and performed as requested by customers. Under service contract arrangements, services are provided as needed over the fixed arrangement term, which terms can be up to twelve months. The Company does not grant its customers a general right of return or any refund terms and imposes a penalty on orders canceled prior to the scheduled shipment date.

The Company regularly evaluates its revenue arrangements to identify deliverables and to determine whether these deliverables are separable into multiple units of accounting. In accordance with revenue recognition guidance, the Company allocates the arrangement consideration among the deliverables based on relative selling prices. The Company has established VSOE for some of its products and services when a substantial majority of selling prices falls within a narrow range when sold separately. For deliverables with no established VSOE, the Company uses best estimate of selling price to determine standalone selling price for such deliverable. The Company does not use third party evidence ("TPE") to determine standalone selling price since this information is not widely available in the market as the Company's products contain a significant element of proprietary technology and the solutions offered differ substantially from competitors. The Company has established a process for developing estimated selling prices, which incorporates historical selling prices, the effect of market conditions, gross margin objectives, pricing practices, as well as entity-specific factors. The Company monitors and evaluates estimated selling price on a regular basis to ensure that changes in circumstances are accounted for in a timely manner.

8

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


When certain elements in multiple-element arrangements are not delivered or accepted at the end of a reporting period, the relative selling prices of undelivered elements are deferred until these elements are delivered and/or accepted. If deliverables cannot be accounted for as separate units of accounting, the entire arrangement is accounted for as a single unit of accounting and revenue is deferred until all elements are delivered and all revenue recognition requirements are met.


Note 2. Recent Accounting Pronouncements

In February 2013, the FASB issued ASU No. 2013-02, Comprehensive Income (Topic 220) - Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income to require reclassification adjustments from other comprehensive income to be presented either in the financial statements or in the notes to the financial statements, which we have done within Note 13 - "Equity and Stock Based Compensation Plans". ASU 2013-02 does not change the current requirements for reporting net income or other comprehensive income in the financial statements. ASU 2013-02 was effective for the period ending March 30, 2013 and is applied prospectively.

Note 3. Fair Value Measurements and Disclosures
Fair value is defined as the price that would be received upon the sale of an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The standard assumes that the transaction to sell the asset or transfer the liability occurs in the principal or most advantageous market for the asset or liability and establishes that the fair value of an asset or liability shall be determined based on the assumptions that market participants would use in pricing the asset or liability.
The Company determines the fair values of its financial instruments based on the fair value hierarchy established in ASC 820, which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. The classification of a financial asset or liability within the hierarchy is based upon the lowest level input that is significant to the fair value measurement. The fair value hierarchy prioritizes the inputs into three levels that may be used to measure fair value:
Level 1 — Quoted prices in active markets for identical assets or liabilities.
Level 2 — Inputs other than Level 1 that are observable, either directly or indirectly, such as quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the financial instrument.
Level 3 — Unobservable inputs that are supported by little or no market activity and are significant to the fair value of the assets or liabilities. Such unobservable inputs include an estimated discount rate used in the Company's discounted present value analysis of future cash flows, which reflects the Company's estimate of debt with similar terms in the current credit markets. As there is currently minimal activity in such markets, the actual rate could be materially different.
 
The following tables present the Company’s assets and liabilities measured at estimated fair value on a recurring basis, excluding accrued interest components, categorized in accordance with the fair value hierarchy (in thousands):
 

9

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


 
March 30, 2013
 
December 29, 2012
 
Fair Value Measurements Using Input Types
 
 
 
Fair Value Measurements Using Input Types
 
 
 
Level 1
 
Level 2
 
Level 3
 
Total
 
Level 1
 
Level 2
 
Level 3
 
Total
Assets:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Cash equivalents:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   Money market funds
$
413

 
$

 
$

 
$
413

 
$
109

 
$

 
$

 
$
109

Commercial paper and corporate debt securities

 
1,400

 

 
1,400

 

 
2,600

 

 

Total cash equivalents
413

 
1,400

 

 
1,813

 
109

 
2,600

 

 
2,709

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Marketable securities:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
U.S. Treasury securities and U.S. Government agency debt securities
20,504

 

 

 
20,504

 
20,568

 

 

 
20,568

Commercial paper, corporate debt securities, and municipal securities

 
27,435

 

 
27,435

 

 
26,425

 

 
26,425

Total marketable securities
20,504

 
27,435

 

 
47,939

 
20,568

 
26,425

 

 
46,993

Total (1)
$
20,917

 
$
28,835

 
$

 
$
49,752

 
$
20,677

 
$
29,025

 
$

 
$
49,702

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Liabilities:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Contingent consideration payable
$

 
$

 
$
2,718

 
$
2,718

 
$

 
$

 
$
2,462

 
$
2,462

(1) Excludes $45.5 million and $60.2 million held in operating accounts as of March 31, 2013 and December 29, 2012 respectively.

The fair values of the marketable securities that are classified as Level 1 in the table above were derived from quoted market prices for identical assets or liabilities that the Company has the ability to access. The fair value of marketable securities that are classified as Level 2 in the table above were derived from the following: non-binding market consensus prices that were corroborated by observable market data, quoted market prices for similar instruments, or pricing models, such as discounted cash flow techniques, with all significant inputs derived from or corroborated by observable market data.

Refer to Note 11 "Line of Credit and Debt Obligations" for the carrying value and fair value of the Company's debt obligations.
Changes in Level 3 liabilities
 
Fair value at December 29, 2012
$
2,462

Payments made to Zygo Corporation
(133
)
Change in fair value included in earnings
389

Fair Value at March 30, 2013
$
2,718

As of March 30, 2013, the Company had liabilities of $2.7 million resulting from the acquisition of certain assets from Zygo Corporation (“Zygo”) which are measured at fair value on a recurring basis, and changes in fair value are recorded in other income or expenses. Of the $2.7 million of Zygo liability at March 30, 2013, $1.0 million was a current liability and $1.7 million was a long-term liability.
As of December 29, 2012, the Company had liabilities of $2.5 million resulting from the acquisition of certain assets from Zygo which are measured at fair value on a recurring basis, and changes in fair value are recorded in other income or expenses. Of the $2.5 million of Zygo liability at December 29, 2012, $0.7 million was a current liability and $1.8 million was a long-term liability.

10

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


The fair values of these liabilities were determined using level 3 inputs using a discounted cash flow model incorporating assumptions that market participants would use in their estimates of fair value. Some of these assumptions included estimates for discount rate, timing and amount of cash flows.

Note 4. Cash and Investments
The following table presents cash, cash equivalents, and available-for-sale investments as of March 30, 2013, and December 29, 2012 (in thousands):
 
Amortized Cost
 
Gross Unrealized Gains
 
Gross Unrealized Losses
 
Estimated Fair Market Value
March 30, 2013
 
 
 
 
 
 
 
Cash
$
45,532

 
$

 
$

 
$
45,532

Cash equivalents:
 
 
 
 
 
 
 
Money market funds
413

 

 

 
413

Commercial paper
1,400

 

 

 
1,400

Short-term investments:
 
 
 
 
 
 
 
Commercial paper
2,400

 

 

 
2,400

U.S. Treasury securities
4,998

 
1

 

 
4,999

U.S. Government agency securities
15,502

 
4

 
(1
)
 
15,505

Municipal securities
6,313

 
4

 
(1
)
 
6,316

Corporate debt securities
18,721

 
6

 
(8
)
 
18,719

Total cash, cash equivalents, and short-term investments
$
95,279

 
$
15

 
$
(10
)
 
$
95,284

 
 
 
 
 
 
 
 
December 29, 2012
 
 
 
 
 
 
 
Cash
$
60,206

 
$

 
$

 
$
60,206

Cash equivalents:
 
 
 
 
 
 
 
Money market funds
109

 

 

 
109

Commercial paper
2,600

 

 

 
2,600

Short-term investments:
 
 
 
 
 
 
 
Commercial paper
3,199

 

 

 
3,199

U.S. Treasury Securities
4,996

 
1

 

 
4,997

U.S. Government agency securities
15,567

 
6

 
(2
)
 
15,571

Municipal securities
5,396

 
1

 
(1
)
 
5,396

Corporate debt securities
17,837

 
2

 
(9
)
 
17,830

Total cash, cash equivalents, and short-term investments
$
109,910

 
$
10

 
$
(12
)
 
$
109,908


Available-for-sale marketable securities, readily convertible to cash, with maturity dates of 90 days or less are classified as cash equivalents, while those with maturity dates greater than 90 days are classified as marketable securities within short-term assets. All marketable securities as of March 30, 2013, and December 29, 2012, were available-for-sale and reported at fair value based on the estimated or quoted market prices as of the balance sheet date. Unrealized gains or losses, net of tax effect, are recorded in accumulated other comprehensive income (loss) within stockholders' equity.
Both the gross unrealized gains and gross unrealized losses for the three month period ended March 30, 2013, were insignificant and no marketable securities had other than temporary impairment as of March 30, 2013. The Company had no unrealized gains or losses for the three month period ended March 31, 2012 because there were no marketable securities. All

11

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


marketable securities as of March 30, 2013, and December 29, 2012 had maturity dates of less than two years and none were invested in foreign entities.

Note 5. Goodwill Impairment and Long-lived Asset Impairment
 
The Company’s impairment review process is completed during the fourth quarter of each year or whenever events or circumstances occur that indicate that an impairment may have occurred. The accounting standard update described above provides the option to assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying value. If, after assessing the qualitative factors, a company determines that it is more likely than not that the fair value of a reporting unit is less than its carrying value, then performing the two-step impairment test is necessary. Otherwise, no further testing is necessary.
    
The Company completed its annual goodwill impairment assessment during the fourth quarter of 2012 by first performing a qualitative assessment. As part of this assessment, the Company considered the trading value of the Company's stock, the industry trends, and the Company's sales forecast and products plans. The Company concluded that it was more likely than not that the fair value was more than the carrying values of the Company's reporting unit and therefore did not proceed to Step 1 of the goodwill impairment test.

The process of evaluating the potential impairment of long-lived assets is highly subjective and requires significant judgment. In estimating the fair value of these assets, the Company made estimates and judgments about future revenues and cash flows. The Company’s forecasts were based on assumptions that are consistent with the plans and estimates the Company is using to manage its business. Changes in these estimates could change the Company’s conclusion regarding impairment of the long-lived assets and potentially result in future impairment charges for all or a portion of their balance at December 29, 2012. The Company did not record any impairment charges in the fiscal year 2012.


Note 6. Accounts Receivable

The Company maintains arrangements under which eligible accounts receivable in Japan are sold without recourse to unrelated third-party financial institutions. These receivables were not included in the consolidated balance sheet as the criteria for sale treatment had been met. The Company pays administrative fees as well as interest ranging from 1.29% to 1.475% based on the anticipated length of time between the date the sale is consummated and the expected collection date of the receivables sold. The Company sold $1.4 million of receivables during each of the three month periods ended March 30, 2013, and March 31, 2012. There were no material gains or losses on the sale of such receivables. There were no amounts due from such third party financial institutions at March 30, 2013, and December 29, 2012.
 

Note 7. Inventories
Inventories are stated at the lower of standard cost (which approximates actual cost on a first-in, first-out basis), or market. Inventories consist of the following (in thousands):
 
 
At
 
March 30,
2013
 
December 29,
2012
Raw materials and sub-assemblies
$
23,704

 
$
22,477

Work in process
7,507

 
5,812

Finished goods
12,334

 
11,370

Inventories
43,545

 
39,659

Inventories-delivered systems
1,524

 
2,274

Total inventories
$
45,069

 
$
41,933

The Company reflects the cost of systems that were invoiced upon shipment but deferred for revenue recognition purposes separate from its inventory held for sale as "Inventories-delivered systems."


12

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


Note 8. Property, Plant and Equipment
Property, plant and equipment consist of the following (in thousands):
 
 
At
 
March 30, 2013
 
December 29, 2012
Land
$
15,571

 
$
15,573

Building and improvements
19,387

 
19,231

Machinery and equipment
23,046

 
21,523

Furniture and fixtures
2,261

 
2,228

Capital in progress
3,574

 
4,377

Total property, plant and equipment, gross
63,839

 
62,932

Accumulated depreciation
(20,901
)
 
(19,719
)
Total property, plant and equipment, net
$
42,938

 
$
43,213

Total depreciation expense for the three month periods ended March 30, 2013, and March 31, 2012, was $1.3 million and $1.0 million, respectively.


Note 9. Intangible Assets
Finite-lived intangible assets are recorded at cost, less accumulated amortization. Finite-lived intangible assets as of March 30, 2013, and December 29, 2012 consisted of the following (in thousands):
 
 
Adjusted cost as of
 
Accumulated amortization as of
 
Net carrying amount as of
 
March 30, 2013
 
March 30, 2013
 
March 30, 2013
Developed technology
$
17,482

 
$
(8,871
)
 
$
8,611

Customer relationships
9,510

 
(8,800
)
 
710

Brand names
1,927

 
(1,625
)
 
302

Patented technology
2,252

 
(1,939
)
 
313

Trademark
80

 
(78
)
 
2

Total
$
31,251

 
$
(21,313
)
 
$
9,938

 
 
Adjusted cost as of December 29, 2012
 
Accumulated amortization as of December 29, 2012
 
Net carrying amount as of December 29, 2012
Developed technology
$
17,700

 
$
(8,277
)
 
$
9,423

Customer relationships
9,538

 
(8,643
)
 
895

Brand names
1,927

 
(1,599
)
 
328

Patented technology
2,252

 
(1,922
)
 
330

Trademark
80

 
(76
)
 
4

Total
$
31,497

 
$
(20,517
)
 
$
10,980

The amortization of finite-lived intangibles is computed using the straight-line method. Estimated lives of finite-lived intangibles range from 2 years to 10 years. Total amortization expense for the three month periods ended March 30, 2013 and March 31, 2012 was $0.9 million and $0.8 million, respectively.

Note 10. Other Current Liabilities
Other current liabilities consist of the following (in thousands):

13

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


 
At
 
March 30,
2013
 
December 29,
2012
Accrued warranty
$
3,655

 
$
4,203

Accrued professional services
962

 
584

Customer deposits
880

 
73

Contingent consideration at fair value
1,015

 
649

Other
1,873

 
2,313

Total other current liabilities
$
8,385

 
$
7,822



Note 11. Line of Credit and Debt Obligations
Debt obligations consist of the following (in thousands):
 
 
At
 
March 30,
2013
 
December 29,
2012
Line of Credit
 
 
 
Balance on line of credit
$

 
$

Debt Obligations
 
 
 
Milpitas building mortgage
5,076

 
5,302

Total debt obligations
5,076

 
5,302

Current portion of debt obligations
(945
)
 
(928
)
Long-term debt obligations
$
4,131

 
$
4,374

 
On April 23, 2012, the Company amended its revolving line of credit facility to (i) extend the maturity date of such facility by two years to April 30, 2014, (ii) decrease the unused revolving line commitment fee from 0.1875% per annum to 0.10% per annum, and (iii) reduce the minimum interest rate on borrowings from 5.75% to 3.00% per annum.
The instrument governing the line of credit facility includes certain financial covenants regarding tangible net worth. The revolving line of credit agreement includes a provision for the issuance of commercial or standby letters of credit by the bank on behalf of the Company. The value of all letters of credit outstanding reduces the total line of credit available. The revolving line of credit is collateralized by a blanket lien on all of the Company’s domestic assets excluding intellectual property and real estate. The minimum borrowing interest rate is 3.00% per annum. Borrowing is limited to the lesser of (a) $7.5 million plus the borrowing base, or (b) $20.0 million. The total borrowing available as of March 30, 2013, was $13.4 million. As of March 30, 2013, the Company was not in breach of any restrictive covenants in connection with this line of credit. There were no outstanding amounts drawn on this facility as of March 30, 2013. Although management has no current plans to request advances under this credit facility, the Company may use the proceeds of any future borrowing for general corporate purposes, future acquisitions or expansion of the Company's business.
In July 2008, the Company entered into a mortgage agreement with General Electric Commercial Finance ("GE") pursuant to which it borrowed $13.5 million. The mortgage initially bears interest at the rate of 7.18% per annum, which rate will be reset after five years to 3.03% over the then weekly average yield of five-year U.S. Dollar Interest Rate Swaps as published by the Federal Reserve. Monthly principal and interest payments are based on a 20 years amortization for the first 60 months and 15 years amortization thereafter. The remaining principal balance of the mortgage and any accrued but unpaid interest will be due on August 1, 2018. The mortgage is secured, in part, by a lien on and security interest in the building and land comprising the Company’s principal offices in Milpitas, California. GE subsequently sold the mortgage on March 31, 2011 to Sterling Savings Bank; however, no changes were made to the terms of the original loan agreement with GE as a result of the sale.
According to the terms of the loan agreement, the Company can make annual pre-payments of up to 20% of the outstanding principal balance without incurring any penalty. In July 2012, the Company prepaid $1.4 million, representing 20% of the outstanding balance. The Company did not make any prepayment during the three months ended March 30, 2013. At March 30, 2013, future annual maturities of all debt obligations were as follows (in thousands):

14

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


 
Fiscal years
Amount
2013
$
701

2014
998

2015
1,073

2016
1,153

2017
1,151

Thereafter

Total loan amount
$
5,076


The Company's level 2 valuation estimate of the fair value of its debt is based on the interest rates for similar debt instruments issued by other entities with credit ratings comparable to the Company's. The estimated fair value of the debt as of March 30, 2013 and December 29, 2012 was $5.5 million and $5.7 million, respectively.
 

Note 12. Net Income/(Loss) Per Share
    
The Company presents both basic and diluted earnings per share on the face of its condensed consolidated statements of operations. Basic earnings per share are computed by dividing net income by the weighted-average number of shares of common stock outstanding for the period. Diluted earnings per share are computed using the weighted-average number of shares of common stock outstanding plus the effect of all dilutive securities representing potential shares of common stock outstanding during the period.
A reconciliation of the share denominator of the basic and diluted net income per share computations for the three months ended March 30, 2013 and March 31, 2012 were as follows (in thousands):

 
 
Three Months Ended
 
 
 
March 30, 2013
March 31, 2012
Weighted average common shares outstanding used in basic net income per share calculation
23,341

23,349

Dilutive common stock equivalents, using treasury stock method

632

Shares used in diluted net income per share computation
23,341

23,981


Since we had a net loss for the three month period ended March 30, 2013, 376 potentially dilutive securities were not included in the computation of diluted shares for this period as inclusion of such shares would have been anti-dilutive. Accordingly, basic and diluted net loss per share were the same for the period ending March 30, 2013.


Note 13. Equity and Stock Based Compensation Plans
Options
The fair value of each option award is estimated on the date of grant using the Black-Scholes valuation model and the assumptions noted in the following table. The expected term of options granted was calculated using the simplified method. The risk-free rate is based on the U.S. Treasury rates in effect during the corresponding period of grant. The expected volatility is based on the historical volatility of Nanometrics’ stock price. The dividend yield reflects that the Company has not paid any    cash dividends since inception and does not intend to pay any cash dividends in the foreseeable future.

15

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


 
Three Months Ended
 
March 30,
2013
 
March 31,
2012
Stock Options
 
 
 
Expected life
4.5 years

 
4.6 years

Volatility
73.12
%
 
78.13
%
Risk free interest rate
0.86
%
 
0.88
%
Dividends

 

Employee Stock Purchase Plan
 
 
 
Expected life
0.5 years

 
0.5 years

Volatility
27.61
%
 
55.93
%
Risk free interest rate
0.11
%
 
0.06
%
Dividends

 

The weighted average fair value per share of the stock options awarded in the three month periods ended March 30, 2013, and March 31, 2012 was $8.88 and $11.13, respectively, based on the fair market value of the Company’s common stock on the grant dates.
A summary of activity under the Company’s stock option plans during the three month period ended March 30, 2013, is as follows:
 
 
Number of
Shares
Outstanding
(Options)
 
Weighted
Average
Exercise
Price
 
Weighted
Average
Remaining
Contractual Term (Years)
 
Aggregate Intrinsic Value (in Thousands)
Options
 
 
 
 
 
 
 
Outstanding at December 29, 2012
2,020,319

 
$
12.01

 
4.44

 
$
6,770

Exercised
(105,843
)
 
7.79

 
 
 
 
Granted
254,300

 
15.52

 
 
 
 
Cancelled
(29,650
)
 
13.45

 
 
 
 
Outstanding at March 30, 2013
2,139,126

 
$
12.62

 
4.43

 
$
6,142

Exercisable at March 30, 2013
1,205,776

 
$
10.65

 
3.55

 
$
5,438

The aggregate intrinsic value in the preceding table represents the total pretax intrinsic value, based on the Company’s closing stock price of $14.43 as of March 30, 2013 which would have been received by the option holders had all option holders exercised their options as of that date. The total intrinsic value of options exercised during the three month periods ended March 30, 2013, and March 31, 2012 was $0.8 million and $2.7 million, respectively.

Restricted Stock Units ("RSUs")
A summary of activity for RSUs during the three month period ended March 30, 2013, is as follows:

Number
of RSUs
 
Weighted
Average Fair
Value
Outstanding RSU as of December 29, 2012
235,162

 
$
16.32

Granted
218,480

 
15.74

Released
(14,168
)
 
14.83

Cancelled

 

Outstanding RSU as of March 30, 2013
439,474

 
$
16.08


16

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)



Stock-based Compensation Expense
Stock-based compensation expense for all share-based payment awards made to the Company’s employees and directors pursuant to the employee stock option and employee stock purchase plans by function were as follows (in thousands):
 
 
Three Months Ended
 
March 30,
2013

March 31,
2012
Cost of products
$
45

 
$
57

Cost of service
59

 
58

Research and development
317

 
319

Selling
440

 
441

General and administrative
596

 
586

Total stock-based compensation expense
$
1,457

 
$
1,461


Other Comprehensive Income

The following table shows a summary of changes in accumulated other comprehensive income by component for the three months ended March 31, 2013 (in thousands):

 
Defined Benefit Pension Plans
 
Foreign Currency Translations
 
Unrealized Gain (Loss) on Investment
 
Total
Balance as of December 29, 2012
$
(179
)
 
$
1,453

 
$
(2
)
 
$
1,272

Other comprehensive income before reclassifications

 
(1,944
)
 
5

 
(1,939
)
Amounts reclassified from accumulated other comprehensive income

 

 

 

Net current-period other comprehensive income

 
(1,944
)
 
5

 
(1,939
)
Balance as of March 30, 2013
$
(179
)
 
$
(491
)
 
$
3

 
$
(667
)


Note 14. Warranties
The Company sells the majority of its products with a 12 months repair or replacement warranty from the date of acceptance. The Company provides an accrual for estimated future warranty costs based upon the historical relationship of warranty costs to the cost of products sold. The estimated future warranty obligations related to product sales are recorded in the period in which the related revenue is recognized. The estimated future warranty obligations are affected by the warranty periods, sales volumes, product failure rates, material usage, and labor and replacement costs incurred in correcting a product failure. If actual product failure rates, material usage, labor or replacement costs were to differ from the Company’s estimates, revisions to the estimated warranty obligations would be required. The warranty accrual represents the best estimate of the amount necessary to settle future and existing claims on products sold as of the balance sheet date. The Company periodically assesses the adequacy of its reported warranty reserve and adjusts such amounts in accordance with changes in these factors. Components of the warranty accrual, which were included in the accompanying condensed consolidated balance sheets with other current liabilities, were as follows (in thousands):
 

17

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


 
Three Months Ended
 
March 30,
2013
 
March 31,
2012
Balance as of beginning of period
$
4,203

 
$
4,797

Accruals for warranties issued during period
423

 
1,472

Aggregate changes in liabilities related to preexisting warranties
217

 
609

Settlements during the period
(1,188
)
 
(1,955
)
Balance as of end of period
$
3,655

 
$
4,923


Note 15. Income Taxes

The Company accounts for income taxes under the provisions of ASC 740, Accounting for Income Taxes. The Company adjusts its effective tax rate each quarter to be consistent with the estimated annual effective tax rate. The Company also records the tax effect of unusual or infrequently occurring discrete items, including changes in judgment about valuation allowances and effects of changes in tax laws or tax rates, in the interim period in which they occur. The Company's effective tax rate reflects the impact of a portion of its earnings being taxed in foreign jurisdictions as well as a valuation allowance maintained on certain deferred tax assets.

The Company recorded a tax benefit of $4.2 million and a tax provision of $2.0 million for the three month periods ended March 30, 2013 and March 31, 2012, respectively. The change during the three months ended March 30, 2013 compared to the corresponding period in 2012 is primarily due to the Company having a net loss for the quarter ending March 30, 2013, compared to net income in the quarter ended March 31, 2012, as well as a one-time benefit of $0.5 million recorded during the three month period ended March 30, 2013 related to the retroactive reinstatement of the 2012 federal R&D Tax Credit.
As of March 30, 2013, the Company continued to maintain a valuation allowance against certain net deferred tax assets as a result of uncertainties regarding the realization of the asset due to cumulative losses and uncertainty of future taxable income in various tax jurisdictions. In the event that the Company determines that the deferred tax assets are realizable, an adjustment to the valuation allowance will be reflected in the tax provision for the period such determination is made.
The Company is subject to taxation in the United States and various states including California, and foreign jurisdictions including South Korea, Japan, China, Germany, France and the United Kingdom. Due to tax attribute carry-forwards, the Company is subject to examination by the IRS for tax years beginning from the 2003 tax year for U.S. tax purposes. The Company is also subject to examination in various states for tax years beginning from the 2002 tax year. The Company is also subject to examination in various foreign jurisdictions beginning from the 2006 tax year.
The Company accrues interest and penalties related to unrecognized tax benefits in its provision for income taxes. The total amount of accrued penalties and interest is not material for the three month period ended March 30, 2013. The Company reduced its unrecognized tax benefits by an immaterial amount during the period ended March 30, 2013 as a result of a lapse of statute of limitations in Japan. During the next twelve months, the Company anticipates increases in its unrecognized tax benefits of approximately $0.5 million.


Note 16. Commitments and Contingencies

Intellectual Property Indemnification Obligations – The Company will, from time to time, in the normal course of business, agree to indemnify certain customers, vendors or others against third party claims that the Company’s products, when used for their intended purpose(s), or the Company's intellectual property, infringe the intellectual property rights of such third parties or other claims made against parties with which it enters into contractual relationships. It is not possible to determine the maximum potential amount of liability under these indemnification obligations due to the limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in each particular claim. Historically, the Company has not made payments under these obligations and believes that the estimated fair value of these agreements is immaterial. Accordingly, no liabilities have been recorded for these obligations in the accompanying unaudited consolidated balance sheets as of March 30, 2013 and December 29, 2012.


18

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


On January 13, 2012, the Company entered into a settlement and limited patent cross license agreement with KLA to resolve all existing patent litigation between the parties. Pursuant to the settlement agreement, the Company agreed to make a one-time payment of $2.5 million to KLA and each party agreed to a cross-license of the patents that were subject to the litigation. The Company accrued for the one-time payment of $2.5 million as expense incurred in the fiscal year of 2011, and the payment was made in the three month period ended March 31, 2012.

Note 17. Geographic and Significant Customer Information
The Company has one operating segment, which is the sale, design, manufacture, marketing and support of thin film, optical critical dimension and overlay dimension metrology systems. The following table summarizes total net revenues (based on the deployments and service location of the systems) and long-lived assets (excluding intangible assets) attributed to significant geographic regions (in thousands):
 
 
Three Months Ended
 
March 30, 2013
 
March 31, 2012
Total net revenues:
 
 
 
United States
$
9,433

 
$
11,577

Japan
5,212

 
4,339

South Korea
3,547

 
27,471

Israel
255

 
6,316

All Other
6,105

 
5,789

Total net revenues
$
24,552

 
$
55,492



 
At
 
March 30, 2013
 
December 29, 2012
Long-lived tangible assets:
 
 
 
United States
$
40,399

 
$
40,600

Japan
125

 
148

South Korea
465

 
520

Israel
10

 
13

All Other
1,939

 
1,932

Total long-lived tangible assets
$
42,938

 
$
43,213


    
The following customers accounted for 10% or more of total accounts receivable:
 
At
 
March 30, 2013
 
December 29, 2012
Intel Corporation
20.2
%
 
12.3
%
Taiwan Semiconductor Mfg. Co.
***

 
17.3
%
    
*** The customer accounted for less than 10% of total accounts receivable for that period.


The following customers accounted for 10% or more of total revenue

19

Table of Contents
NANOMETRICS INCORPORATED
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(Unaudited)


 
Three Months Ended
 
March 30,
2013
 
March 31,
2012
Intel Corporation
29.3
%
 
29.9
%
Samsung Electronics Co. Ltd.
***

 
40.5
%
 
*** The customer accounted for less than 10% of total revenue for that period.

Note 18. Stock Repurchase

On May 29, 2012, the Company's Board of Directors approved a program to repurchase up to $20.0 million of the Company's common stock. Stock repurchases under this program may be made through open market and privately negotiated transactions, at times and in such amounts as management deems appropriate. The timing and actual number of shares repurchased is dependent on a variety of factors including price, corporate and regulatory requirements and other market conditions. Under this program, the Company repurchased and retired 250,400 shares the Company's common stock at the weighted average price of $14.15 per share during fiscal 2012. During the three months ended March 30, 2013, the Company repurchased and retired 332,771 shares of the Company's common stock at the weighted average price of $15.03 per share. As of March 30, 2013, the Company had repurchased and retired 583,171 shares of the Company's common stock at a weighted average price of $14.65 per share under this authorization, and there remained $11.5 million available for the future repurchase of shares of common stock.


ITEM 2.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This Quarterly Report on Form 10-Q contains forward-looking statements that involve risks and uncertainties. The statements contained in this document that are not purely historical are forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, including, without limitation, statements regarding future periods, financial results, revenues, margins, growth, customers, tax rates, product performance, and the impact of accounting rules on our business and the future implications of our statements regarding goals, strategy, and similar terms. We may identify these statements by the use of words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” "intend," "likely," “may,” “might,” "plan," "potential," "predict," "project," "should," “will,” "would," and other similar expressions. All forward-looking statements included in this document are based on information available to us on the date hereof, and we assume no obligation to update any such forward-looking statements, except as may otherwise be required by law.
Our actual results could differ materially from those anticipated in these forward-looking statements as a result of certain risks, uncertainties and changes in circumstances, many of which may be difficult to predict or beyond our control, including those factors referenced in Part II, Item 1A “Risk Factors” and elsewhere in this document, and in Part I Item 1A "Risk Factors" in our Annual Report on Form 10-K for the fiscal year ended December 29, 2012. In particular our results could vary significantly based on: changes in customer and industry spending; rate and extent of changes in product mix; adoption of new products and manufacturing processes; timing of orders, shipments, acceptance of new products; our ability to secure volume supply agreements; and general economic conditions. In evaluating our business, investors should carefully consider these factors in addition to any other risks and uncertainties set forth elsewhere. The occurrence of the events described in the risk factors and elsewhere in this report as well as other risks and uncertainties could materially and adversely affect our business, operating results and financial condition. While management believes that the discussion and analysis in this report is adequate for a fair presentation of the information presented, we recommend that you read this discussion and analysis in conjunction with (i) our audited consolidated financial statements and notes thereto for the fiscal year ended December 29, 2012, which were included in our 2012 Annual Report on Form 10-K filed with the Securities Exchange Commission (SEC) on March 12, 2013, and (ii) our other filings with the SEC.
We are an innovator in the field of metrology and inspection systems for semiconductor manufacturing and other industries. Our systems are designed to precisely monitor film thickness and critical dimensions that are necessary to control the manufacturing process and to identify defects that can affect production yields and performance.
Principal factors that impact our revenue growth include capital expenditures by manufacturers of semiconductors to increase capacity and to enable their development of new technologies, and our ability to take market share. The increasing

20

Table of Contents

complexity of the manufacturing processes for semiconductors is an important factor in the demand for our innovative metrology systems, as are the adoption of optical critical dimension (“OCD”) metrology across fabrication processes, adoption of immersion lithography and double patterning, adoption of new types of thin film materials, the adoption of advanced packaging strategies and wafer backside inspection and the need for improved process control to drive process efficiencies. Our strategy is to continue to innovate organically as well as to evaluate strategic acquisitions to address business challenges and opportunities.
Our revenues are primarily derived from product sales but are also derived from customer service and system upgrades for the installed base of our products. For the three months ended March 30, 2013, we derived 53.3% of our total net revenues from product sales and 46.7% of our total net revenues from services.

Overview

Nanometrics Incorporated and its subsidiaries (“Nanometrics”, the “Company”, or “we”) is a leading provider of advanced, high-performance process control metrology and inspection systems used primarily in the fabrication of integrated circuits, high-brightness LEDs (“HB-LED”), discrete components and data storage devices. Our automated and integrated systems address numerous process control applications, including critical dimension and film thickness measurement, device topography, defect inspection, overlay registration, and analysis of various other film properties such as optical, electrical and material characteristics. Our process control solutions are deployed throughout the fabrication process, from front-end-of-line substrate manufacturing, to high-volume production of semiconductors and other devices, to advanced wafer-scale packaging applications. Our systems enable device manufacturers to improve yields, increase productivity and lower their manufacturing costs. Our defect inspection systems locate large area and microscopic defects on patterned and unpatterned wafers. This system can be used for inspection at nearly every stage of the semiconductor production flow.
Nanometrics Products
We offer a diverse line of systems to address the broad range of process control requirements of the semiconductor manufacturing industry. In addition, we believe that our engineering expertise, strategic acquisitions, supplier alliances and short-cycle production strategies enable us to develop and offer advanced process control solutions in the future that should address industry advancement and trends. We categorize our systems as follows:
Automated Standalone Systems
Our automated systems are made up of both semi-automated and fully automated metrology systems which are employed in both high-volume and low-volume production environments. The Atlas® II, Atlas XP/Atlas XP+ and Atlas-M represent our line of high-performance metrology systems providing optical critical dimension (“OCD”®), thin film metrology and wafer stress for transistor and interconnect metrology applications. The OCD technology is supported by our NanoCD® suite of solutions including our NanoDiffract® software and NanoGenTM scalable computing engine that enables visualization, modeling, and analysis of complex structures. The MosaicTM family of systems provide cost effective overlay metrology solutions, for today's advanced 300mm overlay process technologies, and is available on our Lynx®platform. The UniFire® system enables users to measure multiple parameters at any given process step in the advanced packaging process flow for critical dimension, overlay, and topography applications. Our SPARKTM defect inspection system, offers ultra-fast inspection of patterned and unpatterned semiconductor wafers.
We continue to offer automated products for 200mm factories running at 90nm nodes and above, as well as systems supporting micro-electrical mechanical systems (“MEMS”). Our Q240AT is a 200mm overlay metrology system that incorporates the same measurement technology as the Mosaic, which thereby extends the technology capability of our customers' existing factories.
System Platform
The Lynx platform enables cluster metrology factory automation for improved cost of ownership to our customers by combining our Mosaic, Atlas II and IMPULSE®, UniFire metrology, and SPARK inspection systems in configurations to provide high throughput, reduced footprint systems for leading 300mm wafer metrology applications including OCD, overlay, and thin film process control.
Integrated Systems

21

Table of Contents

Our integrated metrology (“IM”) systems are installed directly onto wafer processing equipment to provide near real-time measurements for improved process control and maximum throughput. Our IM systems are sold directly to end customers and through OEM channels. The IMPULSE system is our latest metrology platform for OCD, DBO, and thin film metrology and has been successfully qualified on numerous OEM platforms. Our 90x0 system is qualified for OEM and direct sales supporting thin film and OCD applications. Our NanoCD solutions suite is sold in conjunction with our IMPULSE and legacy 90x0 systems. Our Trajectory™ system provides in-line measurement of layers in thin film thickness and composition in semiconductor applications.
Materials Characterization
Our Materials Characterization products include systems that are used to monitor the physical, optical, electrical and material characteristics of discrete electronic industry, HB-LED, solar PV, compound semiconductor, strained silicon and silicon-on-insulator (“SOI”) devices, including composition, crystal structure, layer thickness, dopant concentration, contamination and electron mobility.
Our Vertex™ is a photoluminescence (“PL”) mapping system designed for high-volume compound semiconductor metrology applications including power control and photonics applications. The RPMBlue™ is our latest PL mapping system designed specifically for the HB-LED market. We sell Fourier-Transform Infrared (“FTIR”) automated and manual systems in the QS2200/3300 and QS1200 respectively. The FTIR systems are spectrometers designed for non-destructive wafer analysis for various applications. The NanoSpec® line of products includes the 6100 which supports thin film measurement across all applications in both low volume production and research applications.
We are continually working to strengthen our competitive position by developing new technologies and products in our market segment. In furtherance of our goals, we have:

Introduced new products in every core product line and primary market served;
 
Diversified our product line and addressed new markets through acquisitions, such as the 2011 acquisition of Nanda Technologies GmbH, a supplier of high sensitivity, high throughput defect inspection systems;
 
Continued development of new measurement and inspection technologies for advanced fabrication processes; and
 
Researched and developed innovative applications of existing technology to new market opportunities within the solar PV, HB-LED, and data storage industries.

Important Themes and Significant Trends
The semiconductor equipment industry is characterized by cyclical growth. Changing trends in the semiconductor industry continue to drive the need for metrology as a major component of manufacturing systems. These trends include:

Proliferation of Optical Critical Dimension Metrology across Fabrication Processes. Our customers use photolithographic processes to create patterns on wafers. Critical dimensions must be carefully controlled during this process. In advanced node device definition, additional monitoring of thickness and profile dimensions on these patterned structures at CMP, Etch, and Thin Film processing is driving broader OCD adoption. Our proprietary OCD systems can provide the critical process control of these circuit dimensions that is necessary for successful manufacturing of these state of the art devices. Nanometrics OCD technology is broadly adopted across NAND, DRAM, HDD, and logic semiconductor manufacturing processes.
Adoption of Advanced Packaging Processes: Our customers use photolithographic, etching, metallization and wafer thinning to enable next generation advanced packaging solutions for semiconductor devices. The new packaging leads to increased functionality in smaller, less expensive form factors.  Advanced packages can be broken down into high density flip chip or bump packages that increase pin density allowing for more complex I/O on advanced CPU parts. Or, similar or different devices can be stacked at the wafer level using a Through Silicon Via ("TSV") process. The TSV process enables high density small form factor parts, being primarily driven by mobile consumer products (i.e. cellular telephones with integrated CMOS camera sensors). Increasingly, advanced packaging technologies are being adopted by our end customers.
Adoption of New Types of Thin Film Materials. The need for ever increasing device circuit speed coupled with lower power consumption has pushed semiconductor device manufacturers to begin the replacement of the traditional aluminum etch back interconnect flows as well as conventional gate dielectric materials, all which drive a broader adoption of thin film and OCD metrology systems. To achieve greater semiconductor device speed, manufacturers

22

Table of Contents

have adopted copper in Logic/IDM and it is now proliferating in next generation DRAM and Flash nodes. Additionally, to achieve improved transistor performance in logic devices and higher cell densities in memory devices, new materials including high dielectric constant (or high-k) gate materials are increasingly being substituted for traditional silicon-oxide gate dielectric materials. High-k materials are comprised of complex thin films including layers of hafnium oxide and a bi-layer of thin film metals. Our advanced metrology and inspection solutions are required for control of process steps, which are critical to enable the device performance improvements that these new materials allow.
Development of 3D Transistor Architectures. Our end customers continue to improve device density and performance by scaling front end of line transistor architectures. Many of these designs, including fin-fet transistors and 3D-NAND have buried features and high aspect ratio stacked features that enable improved performance and density. The advanced designs require additional process control to manage the complex shapes and materials properties, driving additional applications for both OCD and our UniFire systems.
Need for Improved Process Control to Drive Process Efficiencies. Competitive forces influencing semiconductor device manufacturers, such as price-cutting and shorter product life cycles, place pressure on manufacturers to rapidly achieve production efficiency. Device manufacturers are using our integrated and automated systems throughout the fabrication to ensure that manufacturing processes scale rapidly, are accurate and can be repeated on a consistent basis.
Reduced Number of Customers. Our market is characterized by an ongoing oligopolistic trend which drives customer concentration. The largest customer accounted for 29.3% of our total revenue for the first quarter of 2013, and the largest customer accounted for 40.5% of our total revenue for the first quarter of 2012.


Critical Accounting Policies
The preparation of our financial statements conforms to accounting principles generally accepted in the United States of America, which requires management, in applying our accounting policies, to make estimates and judgments that have an important impact on our reported amounts of assets, liabilities, revenue, expenses and related disclosures at the date of our financial statements. On an on-going basis, management evaluates its estimates including those related to bad debts, inventory valuations, warranty obligations and income taxes. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from management’s estimates. Since December 29, 2012, there have been no significant changes to our critical accounting policies discussed in our Annual Report on Form 10-K for the fiscal year ended December 29, 2012.
Recent Accounting Pronouncements
See Note 2 of the Unaudited Condensed Consolidated Financial Statements for a description of recent accounting pronouncements, including the respective dates of adoption and effects or anticipated effects on results of operations and financial condition.

Results of Operations
Three Month Periods Ended March 30, 2013 and March 31, 2012
Total net revenues - Our net revenues comprised the following categories (in thousands, except percentages):

 
Three Months Ended
 
 
 
 
 
March 30,
2013
 
March 31,
2012
 
Changes In
Amount
 
%
Automated Systems
$
5,262

 
$
40,982

 
$
(35,720
)
 
(87.2
)%
Integrated Systems
2,155

 
4,281

 
(2,126
)
 
(49.7
)%
Materials Characterization
5,662

 
2,595

 
3,067

 
118.2
 %
Total product revenues
13,079

 
47,858

 
(34,779
)
 
(72.7
)%
Service revenues
11,473

 
7,634

 
3,839

 
50.3
 %
Total net revenues
$
24,552

 
$
55,492

 
$
(30,940
)
 
(55.8
)%
For the three month period ended March 30, 2013, total product revenues decreased by $34.8 million relative to the comparable 2012 period. Sales of our Automated Systems and Integrated Systems accounted for $35.7 million and $2.1 million, respectively, of the decrease, partially offset by a $3.1 million increase in sales of Materials Characterization. The year over

23

Table of Contents

year decrease in Automated Systems and Integrated Systems was primarily due to a substantial decline in demand and capital spending by our three largest customers, primarily as a result of their technology refresh cycle and lack of capacity expansion in memory production. The year over year increase in sales of Materials Characterization was primarily due to non-recurring sales of several relatively high priced products into the bare silicon substrate market.
For the three month period ended March 30, 2013, service revenues increased by $3.8 million relative to the comparable 2012 period. This increase was primarily due to upgrades of a large number of installed tools by a customer during the 2013 period. Upgrades tend to fluctuate from quarter to quarter based on availability of new functionality from upgrades and customer production cycles which determine when customers purchase available upgrades.
With a significant portion of the world's semiconductor manufacturing capacity located in Asia, a substantial portion of our revenues continue to be generated in that region. Although sales to customers within individual countries of that region will vary from time to time, we expect that a substantial portion of our revenues will continue to be generated in Asia.

Gross margin. Our gross margin for product and services was as follows:  
 
Three Months Ended
 
March 30,
2013
 
March 31,
2012
Product
34.1
%
 
46.8
%
Services
52.5
%
 
34.9
%
    
The calculation of product gross margin includes both cost of products and amortization of intangible assets. Product gross margin for the three month period ended March 30, 2013, was 34.1%, reflecting a decrease of 12.7 percentage points, from the comparable prior year period. The decrease is primarily due to adverse impact of fixed costs such as fixed overhead, amortization of intangible assets, and reserves for excess and obsolete inventory against much lower revenue in the three month period ended March 30, 2013, which was partially offset by a decrease in standard product cost and improved margins in product mix of tools sold.
The gross margin for our services business was 52.5% for the three month period March 30, 2013, reflecting an increase of 17.6 percentage points compared to the three month period ended March 31, 2012, due principally to increased upgrade revenue, which typically have higher margins then system sales, - and the effects of lower labor and material costs associated with delivery of services under contracts.
Operating expenses. Our operating expenses comprised the following (in thousands, except percentages):

 
Three Months Ended
 
 
 
 
 
Changes in
March 30, 2013
 
March 31, 2012
Amount
 
%
Research and development
$
7,447

 
$
7,476

 
$
(29
)
 
(0.4
)%
Selling
6,932

 
7,211

 
(279
)
 
(3.9
)%
General and administrative
5,512

 
6,081

 
(569
)
 
(9.4
)%
Amortization of intangible assets
198

 
192

 
6

 
3.1
 %
Total operating expenses
$
20,089

 
$
20,960

 
$
(871
)
 
(4.2
)%
Research and development. Research and development expenses decreased slightly for the three months ended March 30, 2013 over the comparable period in 2012. The result is primarily due to a $0.4 million decrease in labor costs associated with a decrease in headcount, offset by an increase in spending for development projects and related activities including a $0.2 million increase in equipment depreciation, tooling, and consumable materials, and a $0.2 million increase in development projects and related activities.
Selling. Selling expenses decreased by $0.3 million for the three months ended March 30, 2013 as compared to the corresponding period in 2012, principally due to a $0.5 million decrease in personnel related expense, including commissions

24

Table of Contents

and bonus accruals, which are impacted by lower sales volumes, and a $0.2 million decrease in travel expenses related lower sales activities, offset by a $0.4 million increase in depreciation of additional equipment used by our sales and applications departments, and more evaluation tools at customer sites.
General and administrative. General and administrative expenses decreased by $0.6 million for the three months ended March 30, 2013, as compared to the corresponding period in 2012, principally due to a $0.2 million decrease in one-time legal expenses associated with a legal settlement with KLA-Tencor and the acquisition of Nanda Technologies in the corresponding period of 2012, a $0.1 million decrease in accounting services, and a $0.3 million decrease in facilities, information technology, and, communication services expenses as certain purchase agreements were renegotiated.
Amortization of intangible assets. Amortization of intangible assets increased slightly for the three month periods ended March 30, 2013 when compared to the same periods in 2012, due principally to fluctuation of foreign currency exchange rates.
Other Income (expense), net. Our net other income (expense) consisted of the following categories (in thousands, except percentages):

 
Three Months Ended
 
 
 
 
 
Changes in
 
March 30, 2013
 
March 30, 2012
Amount
 
%
Interest income
$
25

 
$
52

 
$
(27
)
 
(51.9
)%
Interest expense
(226
)
 
(269
)
 
43

 
(16.0
)%
Other, net
40

 
(175
)
 
215

 
(122.9
)%
Total other income (expense), net
$
(161
)
 
$
(392
)
 
$
231

 
(58.9
)%

For the three months ended March 30, 2013, compared to the same period of 2012, interest income declined minimally as the total balances of cash, cash equivalents, and marketable securities remained relatively flat and interest rates for the three months ended March 30, 2013 were lower than interest rates in the comparable prior year period. Interest expense for the three months ended March 30, 2013 was lower than the comparable prior year period primarily due to a lower principal balance on our mortgage of our headquarters as a result of monthly payments and a prepayment of $1.4 million in July of 2012. Other, net represents an income of $0.1 million and an expense of $0.2 million during the three month periods ended March 30, 2013 and March 31, 2012, respectively. The fluctuation during the three month period ended March 30, 2013 compared to the same period of 2012 is primarily due to a $0.4 million increase in fair value of contingent consideration payable as a result of fluctuation of unobservable inputs during the three months ended March 30, 2013 offset by a $0.2 million gain in foreign exchange gains compared to a $0.2 million loss in foreign exchange losses in the same period of 2012.
Income taxes. We account for income taxes under the provisions of ASC 740, Accounting for Income Taxes. We adjust the effective tax rate each quarter to be consistent with the estimated annual effective tax rate. We also record the tax effect of unusual or infrequently occurring discrete items, including changes in judgment about valuation allowances and effects of changes in tax laws or tax rates, in the interim period in which they occur. Our effective tax rate reflects the impact of a portion of its earnings being taxed in foreign jurisdictions as well as a valuation allowance maintained on certain deferred tax assets.
We recorded a tax benefit of $4.2 million and a tax provision of $2.0 million for the three month periods ended March 30, 2013 and March 31, 2012, respectively. The change during the three months ended March 30, 2013 compared to the corresponding period in 2012 is primarily due to our net loss for the quarter ending March 30, 2013, compared to our net income for the quarter ended March 31, 2012, as well as a one-time benefit of $0.5 million recorded during the period ended March 30, 2013, related to the retroactive reinstatement of the 2012 federal R&D Tax Credit.
As of March 30, 2013, we continued to maintain a valuation allowance against certain net deferred tax assets as a result of uncertainties regarding the realization of the asset due to cumulative losses and uncertainty of future taxable income in various tax jurisdictions. In the event that we determine that the deferred tax assets are realizable, an adjustment to the valuation allowance will be reflected in the tax provision for the period such determination is made.
We are subject to taxation in the United States and various states including California, and foreign jurisdictions including South Korea, Japan, China, Germany, France and the United Kingdom. Due to tax attribute carry-forwards, we are subject to

25

Table of Contents

examination by the IRS for tax years beginning from the 2003 tax year for U.S. tax purposes. We are also subject to examination in various states for tax years beginning from the 2002 tax year. We are also subject to examination in various foreign jurisdictions beginning from the 2006 tax year.
We accrue interest and penalties related to unrecognized tax benefits in our provision for income taxes. The total amount of accrued penalties and interest is not material for the three month period ended March 30, 2013. We reduced our unrecognized tax benefits by an immaterial amount during the period ended March 30, 2013 as a result of a lapse of statute of limitations in Japan. During the next twelve months, we anticipate increases in our unrecognized tax benefits of approximately $0.5 million.

Liquidity and Capital Resources
During the first half of 2012, we implemented an ongoing investment strategy of maintaining a portion of our cash and investments in available-for-sale investments with the objective of preserving capital and maintaining liquidity while mitigating concentration risk and increasing yields. Our policy is to maintain a marketable securities portfolio consisting of highly rated investments that may include: obligations issued by the US Treasury and its agencies, corporate bonds and commercial paper, tax exempt debt obligations of US municipalities, and time deposits at commercial banks. Our policy is that, with the exception of US treasury and agency issues, no single issue at the time of purchase, may exceed 5% of the total portfolio or have a duration exceeding 2 years. At March 30, 2013, and December 29, 2012, we held marketable securities of $47.9 million and $47.0 million, respectively.
We have historically relied on cash flow from operations, borrowings under a credit facility and mortgage, and issuances of equity securities for our liquidity needs. At March 30, 2013, our cash, cash equivalents, and marketable securities totaled $95.3 million and working capital was $149.7 million, compared to $109.9 million and $158.6 million, respectively, as of December 29, 2012.
Our principal cash requirements include working capital, capital expenditures, payment of taxes and payment of principal and interest on borrowings. In addition, we regularly evaluate our ability to repurchase our common stock, pre-pay outstanding debt, and acquire other businesses and technologies.

Cash flows from operating activities -
Cash used by operating activities for the three month period ended March 30, 2013 was $8.5 million, which resulted primarily from the following factors: Net loss of $5.6 million and a $4.5 million reduction in non-cash working capital offset in part by non-cash transactions of $1.6 million. Non-cash transactions primarily consisted of depreciation and amortization expense of $2.1 million, stock based compensation of $1.5 million, inventory write down of $1.3 million, and a $0.4 million increase in the fair value of contingent consideration offset in part by $4.1 million of deferred income taxes. The reduction in non-cash working capital as of March 30, 3013 compared to December 29, 2012 was primarily due to a $5.6 million increase in inventory, and a $0.8 million increase in deferred revenue, partially offset by a $1.3 million decrease in accounts receivable as a result of lower sales volumes during the three month period ended March 30, 2013.
Cash used by operating activities for the three month period ended March 31, 2012 was $2.9 million, which primarily resulted from the following offsetting factors: Net income of $1.7 million, significant non-cash transactions including (i) deferred income tax of $2.5 million, (ii) depreciation and amortization of $1.8 million, and (iii) stock based compensation of $1.5 million. This operating cash flow was offset by $10.6 million decrease in non-cash working capital, consisting principally of an increase in accounts receivable of $9.6 million associated with the increase in revenues over the fourth quarter of 2011; an increase in prepaid expenses and other assets of $2.3 million associated principally with prepaid taxes; and decrease in accounts payable and other accrued liabilities of $1.2 million, which included a $2.5 million payment of the legal settlement accrued at December 31, 2011. The non-cash working capital decrease was partly offset by an increase in deferred revenue of $2.7 million.
Cash flows from investing activities -
For the three month period ended March 30, 2013, $11.3 million of cash was used for purchases of marketable securities, and $1.0 million for capital asset purchases. These outflows were offset by $10.1 million cash received from maturities of marketable securities.

26

Table of Contents

For the three month period ended March 31, 2012, $0.9 million cash was used for capital asset purchases.
Cash flows from financing activities -
For the three month period ended March 30, 2013, $4.2 million was used for financing activities primarily composed of $5.0 million used to repurchase common stock, $0.2 million used to repay debt obligations and a $0.4 million reduction related to the effect of excess tax benefits from the exercise of stock options. These payments were partially offset by $1.6 million net of tax received from the issuance of common stock from employee stock option exercises and stock purchased under the employee stock purchase program.
For the three month period ended March 31, 2012, $1.6 million was provided by financing activities, primarily due to $1.2 million from the issuance of common stock from employee stock option exercises and stock purchased under the employee stock purchase program, and $0.6 million of excess tax benefits from employee stock option exercises, partially offset $0.2 million for repayment of debt obligations, and $0.1 million for payments to Zygo Corporation related to the asset acquisition from 2009.

Line of Credit - On April 23, 2012, we amended our revolving line of credit facility with Comerica Bank principally (i) to extend the maturity date of such facility by two years to April 30, 2014, (ii) decrease the unused revolving line commitment fee from 0.1875% per annum to 0.10% per annum, and (iii) reduce the minimum interest rate on borrowings from 5.75% to 3.00% per annum.

The instrument governing the line of credit facility includes certain financial covenants regarding tangible net worth. The revolving line of credit agreement includes a provision for the issuance of commercial or standby letters of credit by the bank on our behalf. The value of all letters of credit outstanding reduces the total line of credit available. The revolving line of credit is collateralized by a blanket lien on all of our domestic assets excluding intellectual property and real estate. The minimum borrowing interest rate is 3.00% per annum. Borrowing is limited to the lesser of (a) $7.5 million plus the borrowing base, or (b) $20.0 million. The total borrowing available as of March 30, 2013 was $13.4 million. As of March 30, 2013, we were not in breach of any restrictive covenants in connection with this line of credit. There were no outstanding amounts drawn on this facility as of March 30, 2013. Although management has no current plans to request advances under this credit facility, we may use the proceeds of any future borrowing for general corporate purposes, future acquisitions or expansion of our business.

Mortgage Loan - In July 2008, we entered into a loan agreement with General Electric Commercial Finance ("GE") pursuant to which we borrowed $13.5 million secured, in part, by a lien on and security interest in the building and land comprising our principal offices in Milpitas, California. The loan initially bears interest at the rate of 7.18% per annum, which rate will be reset in August 2013 to 3.03% over the weekly average yield of five-year U.S Dollar Interest Rate Swaps as published by the Federal Reserve. Monthly principal and interest payments are based on a twenty year amortization for the first sixty months and fifteen year amortization thereafter. The remaining principal balance of the loan and any accrued but unpaid interest will be due on August 1, 2018. According to the terms of the loan agreement, we can make annual pre-payments of up to 20% of the outstanding principal balance without incurring any penalty. GE subsequently sold the mortgage on March 31, 2011 to Sterling Saving Bank; however, no changes were made to the terms of the original loan agreement with GE as a result of the sale. In July 2012, we prepaid $1.4 million of the loan, respectively, representing 20% of the outstanding balance at the time of prepayment. As of March 30, 2013, the outstanding balance of the loan was $5.1 million.
    
Repurchases of Common Stock - On May 29, 2012, our Board of Directors approved a program to repurchase up to $20.0 million of our common stock. Stock repurchases under this program may be made through open market and privately negotiated transactions, at times and in such amounts as management deems appropriate. The timing and actual number of shares repurchased is dependent on a variety of factors including price, corporate and regulatory requirements and other market conditions. Under this program, we repurchased and retired 250,400 shares our common stock at the weighted average price of $14.15 per share during fiscal 2012. During the three months ended March 30, 2013, we repurchased and retired 332,771 shares our common stock at the weighted average price of $15.03 per share. As of March 30, 2013, we had repurchased and retired 583,171 shares of our common stock at a weighted average price of $14.65 per share under this authorization, and there remained $11.5 million available for the future repurchase of shares of common stock.

Business Partnership - On June 17, 2009, we announced a strategic business relationship with Zygo under which we purchased inventory and certain other assets including the Unifire system from Zygo and the two companies entered into a supply agreement. We will make payments to Zygo (with an estimated present value of $2.7 million as of March 30, 2013) over a period of time as acquired inventory is sold and other aspects of the supply agreement are executed. We made royalty and sustaining engineering payments of $0.1 million to Zygo in each of the three month periods ended March 30, 2013, and March 31, 2012.

27

Table of Contents


We have evaluated and will continue to evaluate the acquisitions of products, technologies or businesses that are complementary to our business. These activities may result in product and business investments, which may affect our cash position and working capital balances. Some of these activities might require significant cash outlays.

We believe our cash, cash equivalents, marketable securities, and borrowing availability will be sufficient to meet our needs through at least the next twelve months. Our ability to fund our working capital needs, planned capital expenditures and scheduled debt payments, as well as to comply with all of the financial covenants under our debt agreements, depends on our future operating performance and cash flow, which in turn are subject to prevailing economic conditions, and to financial, business and other factors, some of which are beyond our control.

ITEM 3.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Our exposure to market risk does not differ materially from that discussed in our Annual Report on Form 10-K for the fiscal year ended December 29, 2012, filed with the SEC on March 12, 2013. However, we cannot give any assurance as to the effect that future changes in interest rates or foreign currency rates will have on our consolidated financial position, results of operations or cash flows.

ITEM 4.
CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
Our management evaluated, with the participation of our Chief Executive Officer, Timothy J. Stultz, and our Chief Financial Officer, Ronald W. Kisling, the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Quarterly Report on Form 10-Q. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that as of March 30, 2013, our disclosure controls and procedures were effective to ensure that information that we are required to disclose in reports that we file or submit under the Securities Exchange Act of 1934 were (i) recorded, processed, summarized and reported within the time periods specified in SEC rules and forms; and (ii) accumulated and reported to our management, including of Chief Executive Officer and Chief Financial Officer, to allow timely discussions regarding required disclosures.
Changes in Internal Control over Financial Reporting
There were no changes in our internal control over financial reporting during the three month period ended March 30, 2013 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls
Our management, including our CEO and CFO, has designed our disclosure controls and procedures and our internal control over financial reporting to provide reasonable assurances that the controls' objectives will be met. However, management does not expect that disclosure controls and procedures or our internal control over financial reporting will prevent or detect all error and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system's objectives will be met. The design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any system's design will succeed in achieving its stated goals under all potential future conditions. Projections of any evaluation of a system's control effectiveness into future periods are subject to risks. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.



28



PART II — OTHER INFORMATION
 
ITEM 1.
LEGAL PROCEEDINGS

None.


ITEM 1A.
RISK FACTORS
Investing in our securities involves a high degree of risk. In assessing these risks, you should carefully consider the information included in or incorporated by reference into this report, including our financial statements and the related notes thereto. You should carefully review and consider all of the risk factors set forth in Part l, “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the fiscal year ended December 29, 2012, filed with the SEC on March 12, 2013. The risks described in our Annual Report on Form 10-K are not the only ones we face. Additional risks and uncertainties that are not presently known to us or that we currently believe are immaterial may also impair our business operations. Our business, operating results and financial conditions could be materially harmed by any of these risks. The trading price of our common stock could decline due to any of these risks and investors may lose all or part of their investment. There have been no material changes in our risk factors from those discussed in our Annual Report on Form 10-K for the fiscal year ended December 29, 2012.

ITEM 2.
UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

We have not granted any equity awards outside of our approved stock plans, nor made any unregistered sales of equity securities in the three month period ended March 30, 2013.
On May 29, 2012, our Board of Directors approved a program to repurchase up to $20.0 million of our common stock. Stock repurchases under this program may be made through open market and privately negotiated transactions, at times and in such amounts as management deems appropriate. The timing and actual number of shares repurchased is dependent on a variety of factors including price, corporate and regulatory requirements and other market conditions. There is currently no expiration date for this repurchase program.
Pursuant to repurchase programs approved by our Board of Directors on May 29, 2012, we repurchased our common stock during the three month period ended March 30, 2013 as follows (in thousands, except shares and per share data):
Period
 
Total Number of Shares Purchased
 
Average price paid per share
 
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs
 
Maximum Number (or Approximate Dollar Value) of Shares that May Yet be Purchased Under the Plans or Program
December 30, 2012 - January 26, 2013
 

 

 

 

January 27, 2013 - February 23 -2013
 

 

 

 

February 24, 2013 - March 30, 2013
 
332,771

 
$
15.03

 
332,771

 
$
11,461

Total
 
332,771

 
$
15.03

 
332,771

 
$
11,461


    




29

Table of Contents

ITEM 6.
EXHIBITS
The following exhibits are filed, furnished or incorporated by reference with this Quarterly Report on Form 10-Q:
 
Exhibit
No.
 
Description
3(i)
 
Certificate of Incorporation
 
 
3.1(1)
 
Certificate of Incorporation of the Registrant
 
 
3(ii)
 
Bylaws
 
 
3.2(2)
 
Bylaws of the Registrant
 
 
 
10
 
Material Contracts
 
 
 
10.1(5)
 
Form of Indemnity Agreement for Directors and Executive Officers
10.2(6)
 
2013 Executive Bonus Structure
 
 
 
31
 
Rule 13a-14(a)/15d-14(a) Certifications
 
 
 
31.1(3)
 
Certification of Timothy J. Stultz, principal executive officer of the Registrant, pursuant to rule 13a-14(a) or rule 15a-14(a) of the Securities Exchange Act of 1934, as amended, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
31.2(3)
 
Certification of Ronald W. Kisling, principal financial officer of the Registrant, pursuant to rule 13a-14(a) or rule 15a-14(a) of the Securities Exchange Act of 1934, as amended, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
32
 
Section 1350 Certifications
32.1(4)
 
Certification of Timothy J. Stultz, principal executive officer of the Registrant, and Ronald W. Kisling, principal financial officer of the Registrant, pursuant to rule 13a-14(b) of the Securities Exchange Act of 1934, as amended, and U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
 
101(4)
 
The following financial statements, formatted in XBRL: (i) Condensed Consolidated Balance Sheets at March 30, 2013 and December 29, 2012, (ii) Condensed Consolidated Statements of Operations for the three months ended March 30, 2013 and March 31, 2012 (iii) Condensed Consolidated Statements of Cash Flows for the three months March 30, 2013 and March 31, 2012, and (v) Notes to Unaudited Condensed Consolidated Financial Statements, tagged as blocks of text. The information is Exhibit 101 is “furnished” and not “filed”, as provided in Rule 402 of Regulation S-T.
 
 
 
101.INS
 
XBRL Instance Document

 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document

 
 
 
101.CAL

 
XBRL Taxonomy Extension Calculation Linkbase Document

 
 
 
101.DEF

 
XBRL Taxonomy Extension Definition Linkbase Document

 
 
 
101.LAB

 
XBRL Taxonomy Extension Label Linkbase Document



 
 
 
101.PRE

 
XBRL Taxonomy Extension Presentation Linkbase Document


 __________________
(1)
Incorporated by reference to Exhibit 3.1 filed with the Registrant’s Current Report on Form 8-K filed on October 5, 2006.
(2)
Incorporated by reference to Exhibit 3.1 filed with the Registrant’s Current Report on Form 8-K filed on April 12, 2012.
(3)
Filed herewith.
(4)
Furnished herewith.
(5)
Incorporated by reference to Exhibit 10.1 filed with the Registrant's Current Report on Form 8-K filed on March 18, 2013.
(6)
Incorporated by reference to the disclosure in Item 5.02 of the Registrant's Current Report on Form 8-K filed on March 18, 2013.


30

Table of Contents

SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
 
NANOMETRICS INCORPORATED
 
(Registrant)
 
 
 
 
By:
/S/    RONALD W. KISLING      
 
 
Ronald W. Kisling
 
 
Chief Financial Officer
Dated: May 7, 2013

31

Table of Contents

EXHIBIT INDEX
 
Exhibit
No.
 
Description
 
 
3(i)
 
Certificate of Incorporation
 
 
3.1(1)
 
Certificate of Incorporation of the Registrant
 
 
3(ii)
 
Bylaws
 
 
3.2(2)
 
Bylaws of the Registrant
10
 
Material Contracts
 
 
 
10.1(5)
 
Form of Indemnity Agreement for Directors and Executive Officers
10.2(6)
 
2013 Executive Bonus Structure
31
 
Rule 13a-14(a)/15d-14(a) Certifications
 
 
31.1(3)
 
Certification of Timothy J. Stultz, principal executive officer of the Registrant, pursuant to rule 13a-14(a) or rule 15a-14(a) of the Securities Exchange Act of 1934, as amended, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
31.2(3)
 
Certification of Ronald W. Kisling, principal financial officer of the Registrant, pursuant to rule 13a-14(a) or rule 15a-14(a) of the Securities Exchange Act of 1934, as amended, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
32
 
Section 1350 Certifications
 
 
32.1(4)
 
Certification of Timothy J. Stultz, principal executive officer of the Registrant, and Ronald W. Kisling, principal financial officer of the Registrant, pursuant to rule 13a-14(b) of the Securities Exchange Act of 1934, as amended, and U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
 
101(4)
 
The following financial statements, formatted in XBRL: (i) Condensed Consolidated Balance Sheets at March 30, 2013 and December 29, 2012, (ii) Condensed Consolidated Statements of Operations for the three months ended March 30, 2013 and March 31, 2012, (iii) Condensed Consolidated Statements of Cash Flows for the three months ended March 30, 2013 and March 31, 2012, and (v) Notes to Unaudited Condensed Consolidated Financial Statements, tagged as blocks of text. The information is Exhibit 101 is “furnished” and not “filed”, as provided in Rule 402 of Regulation S-T.


__________________
(1)
Incorporated by reference to Exhibit 3.1 filed with the Registrant’s Current Report on Form 8-K filed on October 5, 2006.
(2)
Incorporated by reference to Exhibit 3.1 filed with the Registrant’s Current Report on Form 8-K filed on April 12, 2012
(3)
Filed herewith.
(4)
Furnished herewith.
(5)
Incorporated by reference to Exhibit 10.1 filed with the Registrant's Current Report on Form 8-K filed on March 18, 2013.
(6)
Incorporated by reference to the disclosure in Item 5.02 of the Registrant's Current Report on Form 8-K filed on March 18, 2013.

.

32