Annual Statements Open main menu

Proto Labs Inc - Annual Report: 2021 (Form 10-K)

prlb20211231_10k.htm
 

 

Table of Contents

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

________________

 

FORM 10-K

 

(Mark One)

 

 

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended December 31, 2021

or

 

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from                      to                     

 

Commission File Number: 001-35435

 

 

Proto Labs, Inc.

(Exact name of Registrant as specified in its charter)

 

Minnesota

41-1939628

(State or other jurisdiction of

(I.R.S. Employer

incorporation or organization)

Identification No.)

 

 

5540 Pioneer Creek Drive

 

Maple Plain, Minnesota

55359

(Address of principal executive offices)

(Zip Code)

 

(763) 479-3680

(Registrant’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

Trading Symbol(s)

Name of each exchange on which registered

Common Stock, Par Value $0.001 Per Share

PRLB

New York Stock Exchange

 

Securities registered pursuant to Section 12(g) of the Act: None

____________________________________________

 

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes ☒  No 

 

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes ☐  No ☒

 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ☒  No ☐

 

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files).  Yes  ☒  No  ☐

 

 

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ☒

Accelerated filer ☐

 

 

Non-accelerated filer ☐

Smaller reporting company ☐

  

 

Emerging growth company ☐

 

If an emerging growth company, indicate by check mark if the Registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

 

Indicate by check mark whether the Registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

 

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes ☐  No ☒

 

As of June 30, 2021 (the last business day of the Registrant’s most recently completed second fiscal quarter), the aggregate market value of voting stock held by non-affiliates of the Registrant was approximately $2.5 billion.

 

As of February 9, 2022, there were 27,466,902 shares of the Registrant’s common stock outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the Registrant’s definitive proxy statement relating to its 2022 annual meeting of shareholders are incorporated by reference into Part III of this Form 10-K where indicated. Such proxy statement will be filed with the U.S. Securities and Exchange Commission within 120 days after the end of the fiscal year to which this report relates.

 

 

 

 

Table of Contents

  

   

Page

PART I

Item 1.

Business

5

Item 1A.

Risk Factors

18

Item 1B.

Unresolved Staff Comments

31

Item 2.

Properties

31

Item 3.

Legal Proceedings

32

Item 4.

Mine Safety Disclosures

32

     

PART II

Item 5.

Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

33

Item 6.

[Reserved]

35

Item 7.

Management's Discussion and Analysis of Financial Condition and Results of Operations

36

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

48

Item 8.

Financial Statements and Supplementary Data

49

Item 9.

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

81

Item 9A.

Controls and Procedures

81

Item 9B.

Other Information

81

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections 81
     

PART III

Item 10.

Directors, Executive Officers and Corporate Governance

82

Item 11.

Executive Compensation

82

Item 12.

Security Ownership of Certain Beneficial Owners and Management

82

Item 13.

Certain Relationships and Related Transactions, and Director Independence

82

Item 14.

Principal Accountant Fees and Services

82

     

PART IV

Item 15.

Exhibits and Financial Statement Schedules

83

 

 

 

Special Note Regarding Forward Looking Statements

 

Statements contained in this Annual Report on Form 10-K regarding matters that are not historical or current facts are “forward-looking statements” within the meaning of The Private Securities Litigation Reform Act of 1995. In some cases, you can identify forward-looking statements by the following words: “may,” “will,” “could,” “would,” “should,” “expect,” “intend,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “project,” “potential,” “continue,” “ongoing” or the negative of these terms or other comparable terminology, although not all forward-looking statements contain these words. These statements involve known and unknown risks, uncertainties and other factors which may cause our results to be materially different than those expressed or implied in such statements. In particular, some of the risks associated with our business include:

 

  the duration, scope, severity and potential mutations of COVID-19;
     
 

the level of competition in our industry and our ability to compete;

 

 

 

 

our ability to respond to changes in our industry;

 

 

 

 

our ability to effectively grow our business and manage our growth;

 

 

 

 

our ability to continue to sell to existing and new customers;

 

 

 

 

our ability to meet product developers’ and engineers’ needs and expectations regarding quick turnaround time, price and specifications for quality;

 

 

 

 

the adoption rate of e-commerce and 3D CAD software by product developers and engineers;

 

 

 

 

our ability to process a large volume of designs and identify significant opportunities in our business;

 

 

 

 

our ability to maintain and enhance our brand;

 

 

 

 

our ability to successfully identify, complete and integrate acquisitions or other strategic transactions;

     
  our ability to complete and successfully launch updates to our systems;
 

 

 

 

the loss of key personnel or failure to attract and retain additional personnel;

 

 

 

 

system interruptions at our operating facilities;

 

 

 

 

possible unauthorized access to customers’ confidential information stored in our systems; and

 

 

 

 

our ability to protect our intellectual property and not infringe on others’ intellectual property.

 

Certain of these factors and others are described in the discussion on risk factors that appear in Part I, Item 1A. “Risk Factors” of this Annual Report on Form 10-K and uncertainties are detailed in this and other reports and filings with the Securities and Exchange Commission (SEC). Other unknown or unpredictable factors also could have material adverse effects on our future results. We cannot guarantee future results, levels of activity, performance or achievements. Accordingly, you should not place undue reliance on these forward-looking statements. Finally, except as required by law, we expressly disclaim any intent or obligation to update any forward-looking statements to reflect subsequent events or circumstances.

 

 

PART I

 

Item 1. Business

 

 

Item 1. Business

 

Overview

 

Proto Labs, Inc. was incorporated in Minnesota in 1999. The terms “Proto Labs,” the “Company,” “we,” “us,” and “our” as used herein refer to the business and operations of Proto Labs, Inc. and its subsidiaries. We are one of the world’s largest and fastest digital manufacturers of custom prototypes and on-demand production parts. Our mission is to empower companies to bring new ideas to market by offering the fastest and most comprehensive digital manufacturing service in the world. Our automated quoting and manufacturing systems allow us to produce commercial-grade plastic, metal, and liquid silicone rubber parts in as fast as one day. We manufacture prototype and low volume production parts for companies worldwide, who are under increasing pressure to bring their finished products to market faster than their competition. We utilize injection molding, computer numerical control (CNC) machining, 3D printing and sheet metal fabrication to manufacture custom parts for our customers. We have manufactured over 370 million parts for customers. For most of our offerings, our proprietary technology eliminates most of the time-consuming and expensive skilled labor conventionally required to quote and manufacture parts. Using our technology, we have analyzed over 7.4 million unique part designs. Our customers conduct nearly all of their business with us over the Internet. We target our products to the millions of product developers and engineers who use three-dimensional computer-aided design (3D CAD) software to design products across a diverse range of end-markets. In addition, we serve procurement and supply chain professionals seeking to manufacture custom parts on-demand. We have established in-house manufacturing facilities and offices in the United States, Europe and Japan, which we believe are three of the largest geographic markets where our customers are located. Through the acquisition of Hubs (formerly 3D Hubs, Inc.) (Hubs) in 2021, we are able to provide our customers access to a global network of premium manufacturing partners who reside across North America, Europe and Asia, complementing our in-house manufacturing. We believe our use of advanced technology enables us to offer significant advantages at competitive prices to many customers and is the primary reason we have become a leading supplier of custom parts.

 

We believe prototype and low volume custom parts manufacturing has historically been an underserved market due to the inefficiencies inherent in the quotation, equipment set-up and non-recurring engineering processes required to produce custom parts. Our customers typically order short run custom parts for a variety of reasons, including: 

 

 

they need a prototype to confirm the form, fit and function of one or more components of a product under development;

     
 

they need an initial supply of parts to support pilot production for testing of a product;

     
 

they need an initial supply of parts to support production while their tools for a high-volume production mold are prepared;

     
 

they need to meet their customers' variable demand for parts in a competitive timeframe;

     
 

their product will only be produced in a limited quantity and/or is highly customized;

     
 

they need to support end-of-life production in a cost-effective manner;

     
 

they want to avoid minimum order quantities or storing inventory;

     
 

they need access to diverse, cost competitive manufacturing capabilities and value the convenience of working with a single supplier to match parts to the best producer; or

     
 

they need low- to mid-volumes of parts on an irregular schedule and prefer to order on-demand.

 

5

 

In each of these instances, we believe our solution provides product developers, engineers, and production buyers with an exceptional combination of speed, quality, competitive pricing, ease of use and reliability that they typically cannot find among conventional custom parts manufacturers. Our technology enables us to ship parts as soon as the same day after receipt of a customer’s design submission.

 

Our primary manufacturing product lines currently include Injection Molding, CNC Machining, 3D Printing and Sheet Metal. We continually seek to expand the range of size and geometric complexity of the parts we can make with these processes, to extend the variety of materials we are able to support and to identify additional manufacturing processes to which we can apply our technology in order to better serve the evolving preferences and needs of product developers and production buyers. Through the acquisition of Hubs, and as we complete the integration of our offerings, we will be providing our customers access to a global network of premium manufacturing partners which significantly expands the breadth and depth of our manufacturing capabilities. The acquisition of Hubs also allows us to offer customers a wider variety of lead times and pricing options, and an expanded envelope of parts (complexity, size, etc.). 

 

We have experienced significant growth since our inception in 1999. We have grown our total revenue from $344.5 million in 2017 to $488.1 million in 2021.

 

Our increases in revenue can be attributed to expanding our customer base, broadening our parts envelope, and launching new manufacturing technologies. We were founded in 1999 with plastic injection molding, and have expanded our product lines over the years by the introduction of: 

 

 

CNC machining in 2007;

 

 

liquid silicon rubber (LSR) and lathe manufacturing processes that expanded the breadth and scope of our injection molding and CNC machining product lines in 2014;

 

 

3D printing, including stereolithography (SL), selective laser sintering (SLS), and direct metal laser sintering (DMLS), through our acquisition of FineLine Prototyping, Inc. (FineLine) in 2014 and expanded through our acquisition of certain assets of Alphaform AG (Alphaform) in 2015;

 

 

rapid overmolding technology in 2016 and insert molding technology in 2017, both of which expanded the breadth of our manufacturing capabilities in our Injection Molding product line;

 

 

PolyJet and Multi Jet Fusion (MJF) in 2017, which expanded the processes with which we produce 3D printed parts;

 

 

injection molding commercial offerings tailored to on-demand manufacturing customers in 2017;

 

 

sheet metal fabrication capability through our acquisition of RAPID Manufacturing Group, LLC (RAPID) in 2017; 

 

 

expanded CNC machining capabilities for larger and more complex parts through our acquisition of RAPID in 2017;

 

 

Carbon Digital Light Synthesis(TM) (DLS) in 2019, which further expanded the processes with which we produce 3D printed parts;

 

 

enhancements to our e-commerce customer interface and back-end operations software in Europe in the fourth quarter of 2020 and in the United States in the first quarter of 2021 designed to add value for our customers and support the growth of the business in the future;

 

 

Hubs in 2021 to provide the platform to expand our offering for our customers by providing access to a global network of premium manufacturing partners; and

 

 

Critical-to-Quality First Article Inspection technology for Injection Molded prototypes and low-volume production parts.

 

6

 

a1.jpg

 

 

Industry Overview

 

We serve product developers and engineers worldwide who bring new ideas to market in the form of products containing one or more custom parts. Many of these product developers and engineers use 3D CAD software to create digital models representing their custom part designs that are then used to create physical parts for concept modeling, prototyping, functional testing, market evaluation or production. Custom prototype parts play a critical role in the product development process, as they provide product developers and engineers with the ability to test and confirm their intended performance requirements and explore design alternatives.

 

Our digital model supports the transition from prototyping to production and enables us to serve product developers and engineers through prototyping and product development. Our digital model also enables us to serve production buyers that are focused on bringing their end product to market in a scalable, cost-effective manner. Our internal manufacturing operations, augmented by external manufacturing partners through our acquisition of Hubs in 2021, allow us to provide solutions for the many customer use cases from prototyping to low-volume production in a broad range of lead time and pricing options.

 

We believe there are three significant trends disrupting the manufacturing industry today:

 

 

SKU Proliferation – The increase in the number of products launched has been dramatic across many sectors.

 

Shorter Product Life Cycles – New products are launching faster and more frequently than ever before, partially driven by the internet of things and other connected device trends, resulting in shorter lives in the market.

 

Shift to E-commerce Sourcing – The first two trends, SKU proliferation and shorter product life cycles, put pressure on traditional supply chains causing many to adopt digital solutions and begin to invest in digital supply ecosystems.

 

The impacts of these trends include increased volatility, reduced development time, increased variety to manage, higher pressure on development costs, shorter payback period in the market and reduced capital investment per product. Our digital thread makes us ideally suited to solve these challenges for many manufacturing companies by offering world-class speed, low upfront investment, no minimum order quantities, broad manufacturing capabilities, and flexibility to adapt to demand volatility.

 

7

 

Our Process

 

Our digital thread, which is the combination of our proprietary software and the physical manufacturing process, has enabled us to reinvent manufacturing. Our digital thread ties together each aspect of the online ordering and manufacturing processes, including 3D CAD modeling and visualization tools, proprietary design for manufacturability analysis (DFM), computer aided manufacturing, the manufacturing equipment, and the shop floor data collection systems. Digital manufacturing, and the addition of the digital thread, results in automation that reduces manufacturing and labor costs and increases throughput, enabling us to differentiate ourselves as one of the world’s fastest and most effective solutions for prototype and low volume production use cases.

 

Our technology allows us to manufacture a broad range of parts and products, across multiple industries and processes and enables us to serve a diverse set of customers. We currently serve all manufacturing industry verticals, with our top industries being medical and healthcare, computer electronics, industrial machinery and equipment, aerospace and automotive.

 

The Aura Project, a project with our client, Aura, is one example of our broad ability to serve our customers’ use cases. Aura came to us in the midst of the COVID-19 pandemic with a need for prototyping to rapidly bring to market a safe, high-quality ventilator that was also low in cost. Our automated analysis helped reduce their startup cost, and Protolabs’ quick turn sheet metal fabrication and 3D printing helped Aura move quickly through several rounds of iterations to prepare a final design. This product went to market in record time and their ability to rapidly prototype with us was key to their success.

 

Customer Order

 

The customer order process begins when the customer uploads one or more 3D CAD models representing the desired part geometry through our web-based customer interfaces. Our websites provide a straightforward means for our customers to submit 3D CAD part designs, including managing projects with multi-part orders, across multiple services and capabilities. Our proprietary software uses complex algorithms to analyze the 3D CAD geometry, analyze its DFM and support the creation of an interactive, web-based quotation containing pricing and manufacturability information. Using this technology, we have analyzed over 7.4 million unique part designs. The artificial intelligence and machine learning provided by each analysis allows us to continually improve our DFM technology. When the analysis is complete, a link to the quotation is then e-mailed to the customer, who can access the quotation, change a variety of order parameters and instantly see the effect on price before finalizing the order.

 

Digital Manufacturing Process

 

Our internal manufacturing operations produce parts in-house, while our outsourced manufacturing operations automatically route the parts for production by a global network of premium manufacturing partners.

 

Internal Manufacturing Operations

 

a2.jpg

 

8

 

For our internal manufacturing operations, once the design is ready and the customer places the order, digital instructions are sent to the production floor where manufacturing can begin immediately. Our proprietary software and business process automates the non-recurring manufacturing engineering in many of our services, removing time and cost from the manufacture of the custom part. With the integrated digital thread, data is shared through the continuum of the manufacturing process, from product conception and design upload to manufacturing, inspection and delivery. This ensures consistency, quality and a high degree of automation. As a result of this automation, we are able to ship parts to customers with industry leading speed at scale.

 

 

Outsourced Manufacturing Operations to Network of Manufacturing Partners

 

 

a3.jpg

 

Once a customer order is confirmed, Hubs’ proprietary software automatically routes the parts to the right manufacturing partner within minutes using a smart order routing system. Selected highlights of Hubs’ proprietary software platform are:

 

 

Majority of ordered parts are instantly quoted

 

98% of orders are manufacturable and the design for manufacturability software developed in-house

 

Majority of sourced orders are paired automatically using smart order routing system

  Machine learning on data of over 7 million parts produced

 

Shipping Parts to Customers

 

Once parts are produced through our digital manufacturing process, either in-house or by one of our manufacturing partners, the parts are shipped to our customer. Parts are shipped in as little as one business day from design submission. We ship our parts via small parcel common carriers on standard terms and conditions.

 

Our Product Lines

 

Our suite of services falls under our four main product offerings — Injection Molding, CNC Machining, 3D Printing and Sheet Metal. These product lines offer many engineers and buyers the ability to quickly and efficiently outsource their quick-turn custom parts manufacturing. See Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” for the historical revenue generated by each of Injection Molding, CNC Machining, 3D Printing and Sheet Metal. In 2021, we augmented our internal manufacturing operations through our acquisition of Hubs to expand the envelope of custom parts we can provide to our customers through a network of premium manufacturing partners in each of our product lines.

 

9

 

Injection Molding

 

Our Injection Molding product line uses our 3D CAD-to-CNC machining technology for the automated design and manufacture of molds, which are then used to produce custom plastic and liquid silicone rubber injection-molded parts and over-molded and insert-molded injection-molded parts on commercially available equipment. Our Injection Molding product line works best for on-demand production, bridge tooling, pilot runs and functional prototyping. Our affordable molds and quick turnaround times help reduce design risk and limit overall production costs for product developers and engineers. Because we retain possession of the molds, customers who need short-run production often come back to Proto Labs’ Injection Molding product line for additional quantities. They do so to support pilot production for product testing, while their tooling for high-volume production is being prepared, because they need on-demand manufacturing due to disruptions in their manufacturing process, because their product requires limited annual quantity or because they need end-of-life production support. In 2017, we launched an on-demand manufacturing injection molding service. This service utilizes our existing processes, but is designed to fulfill the needs of customers with on-going production needs.

 

CNC Machining

 

Our CNC Machining product line uses commercially available CNC machines to offer milling and turning. CNC milling is a manufacturing process that cuts plastic and metal blocks into one or more custom parts based on the 3D CAD model uploaded by the customer. CNC turning is a subtractive manufacturing process that rotates a metal rod while a cutting tool is used to remove material and create final parts. Quick-turn CNC machining works best for prototyping, form and fit testing, jigs and fixtures and functional components for end-use applications.

 

Industrial 3D Printing

 

Our Industrial 3D Printing product line includes SL, SLS, DMLS, MJF, PolyJet, Carbon DLS and fused deposition modeling (FDM) processes, which offers customers a wide-variety of high-quality, precision rapid prototyping and low volume production. These processes create parts with a high level of accuracy, detail, strength and durability. Industrial 3D Printing is best suited for functional prototypes, complex designs and end-use applications.

 

Sheet Metal

 

Our Sheet Metal product line includes quick-turn and e-commerce-enabled custom sheet metal parts, providing customers with prototype and low-volume production parts. The rapid prototype sheet metal process is most often used when form, fit and function are all a priority. Our manufacturing process uses customer 3D CAD models uploaded by the customer to fabricate rapid prototyping sheet metal or end-use production parts and assemblies.

 

Our Growth Strategy

 

We currently operate in a global custom contract manufacturing market which is a form of outsourcing where companies enter into an arrangement or formal agreement with another company or individual for the manufacture of complete parts, products, or components. Since our inception, we have focused on areas where we could automate the manufacturing process via our digital model. Our initial focus was on prototypes and simple parts and have added complexity over time. We have added product lines and expanded those product lines to meet the needs of our customers, which has ultimately driven our growth. Historically, we focused on speed, reliability and quality as key components of our differentiation, and customers used us for production where there was a good fit. We have positioned ourselves to avoid routine, low margin, high-volume commoditized manufacturing. We have evolved from serving primarily fast response prototypes to broader customer use cases including higher requirements, such as a tighter tolerance, broader ranges of lead times and price points and quality and process documentation to support production needs. We have further expanded our offering through the acquisition of Hubs to be able to serve our customers more holistically, augmenting our in-house manufacturing capabilities with a network of premium manufacturing partners to serve our customer needs that currently reside outside of our internal manufacturing capabilities. As we integrate with Hubs, our goal is to go from being one of the fastest and most reliable providers of custom parts to one of the most comprehensive in our four services. Combining our unprecedented in-house manufacturing with Hubs broad services offer and wide variety of price and lead time options expands our ability to provide value to our customers and differentiates us from competitors.

 

10

 

The principal elements of our growth strategy are to:

 

Establish Platform (2020-2023)

 

We serve nearly all of our customers over the internet using our e-commerce, digital model. The majority of customers upload CAD files through our secure e-commerce platform to receive a quote, and ultimately, place an order. The order is then processed through our digital model that is connected by our systems.

 

In the fourth quarter of 2020 in Europe and in the first quarter of 2021 in the United States, we launched Protolabs 2.0 (PL 2.0), a project designed to enhance the functionality and ease of use of our platform and expanded the capabilities of our customer-facing and back-end systems in order to further increase automation and meet the evolving needs of product developers and engineers worldwide.

 

In 2021, our e-commerce platform was recognized by the World Economic Forum’s Global Lighthouse Network, recognizing our industry leading efforts to implement Fourth Industrial Revolution (4IR) technologies at our Plymouth, MN injection molding facility. The Lighthouse Network serves as a platform for manufacturers showing leadership in using 4IR technologies to share and learn best practices, support new partnerships and help other manufacturers deploy technology, adopt sustainable solutions, and transform their workforces. By implementing manufacturing automation and industrial internet of things technologies like this, we are able to unlock new levels of sustainability and efficiency for ourselves and our customers.

 

We believe product developers and engineers have come to expect advanced web-based tools and a fully integrated Internet platform from their vendors. In the near term, PL 2.0 provides our customers a more simplified quoting and more intuitive user experience. It requires fewer clicks and provides a better overall buying experience. Further, it allows expanded production capabilities for our customers. In the long-term, we expect PL 2.0 will allow us to launch new services and capabilities faster, help integrate acquisitions more efficiently, and continue to improve the buying experience by monitoring customer feedback and how customers use the system.

 

a4.jpg

 

Our integration of the Hubs platform will position us to be able to expand our offer to provide our customers with the broadest solution for custom parts and we will continue to deliver innovation through historic and future R&D investment. With the integration of the Protolabs and Hubs architectures into a united platform, we can provide customers a complete offer with a single e-commerce storefront. This combined architecture will connect customers to the right manufacturing solution based on their needs. We will provide a range of price and lead time options providing customers with the most comprehensive custom parts solution in the world.

 

Accelerate Growth (2022-2026)

 

Our launch of PL 2.0 and acquisition of Hubs in 2021, will provide the foundation for us to accelerate growth in 2022 and beyond. The enhanced customer experience and expanded offering portfolio is expected to drive higher customer satisfaction, higher annual revenue per customer and improved customer retention. In addition, the new platform will allow us to continue to expand our parts offerings and serve a broader set of customer use cases. We serve a diverse set of customers from over a dozen industries. Accordingly, unlike most traditional manufacturers, we are not reliant on a single industry for growth. Our customers range from small start-ups to multi-national corporations. We continue to capitalize on the e-commerce revolution, as product developers and engineers move from sourcing parts traditionally to the e-commerce experience for sourcing custom parts.

 

11

 

We primarily focus on two types of customers: design engineers and production buyers. Our original customer, and still our largest type of customer, is the design engineer. Design engineers typically value, in order of importance, reliability, speed, quality, breadth of manufacturing capabilities, ease of use and price. Our first growth opportunity is to capture more wallet share by being a single provider for all their needs. The breadth and depth of our offering expanded with our acquisition of Hubs, allowing us to better serve our design engineers. Our enhanced offering is expected to lead to higher customer retention, greater customer satisfaction and increased revenue per customer as we serve more of their product needs.

 

Our second type of customer is the production buyer. Our ability to move quickly from prototyping to production enables us to serve the low volume, on-demand production needs of our customers. Shorter product life cycles, unpredictable demand, and the need to get products to market more quickly have increased the demand for our production offering. Production buyers typically value, in order of importance, quality, total cost of ownership, reliability, breadth of manufacturing capabilities, ease of use and speed. Transitioning with our customers to production has been a newer growth strategy for us and we historically captured only a portion of production business. Through our internal R&D road map and our acquisition of Hubs, we continue to expand our production capabilities to be able to serve more of our customers’ needs, including offering a variety of price points and lead times, quality documentation and 3D printing production for certain use cases.

 

Finally, we anticipate our new complete and comprehensive offering will be attractive to new customers. We expect to continue to acquire new customers from traditional shops by communicating the advantages of digital manufacturing.

 

Expand Profitability (2025 and beyond)

 

The market in which we play, the tremendous value we deliver to our customers and our ability to expand our capabilities to serve our customers, has allowed us to grow from revenue of $126.0 million in 2012, the year of our IPO, to revenue of $488.1 million in 2021. As we establish our platform and accelerate growth, we are positioned to serve customers more holistically, which we expect will drive continued, long-term sustainable revenue growth, and ultimately, expanded profitability.

 

In recent years, we have focused on expanding our capabilities and investing in building our base infrastructure to support our long-term growth. Our integrated offer and service expansion will provide the platform for accelerating our growth. Going forward, we aim to leverage scale and innovation to expand profitability and capture enhanced operational efficiencies.

 

Marketing

 

As a customer-centric organization, we continue to evolve our go-to-market strategy. We believe we have three marketing opportunities to capitalize on: 1) expanding business with existing customers, including engineers and buyers, 2) engaging buyers who are new to us and are increasing e-commerce spend as manufacturing digitalizes, and 3) capturing engineers who are new to us and are turning to digital manufacturing solutions. Our global marketing effort generates leads for our sales teams and seeks to strengthen our reputation as an industry leader in digital manufacturing services for custom prototyping and low-volume manufacturing. Since we are an agile, technology-based company, much of our marketing activities occur online. We use marketing automation software to enhance the productivity of our marketing and sales teams and continuously track the results of our campaigns to ensure our return on investment.

 

We maintain top-of-mind brand awareness with product developers and engineers through regular publication of technical information including design guidelines and helpful tips, engineering white papers, educational webinars, quick videos, and a quarterly journal focused on important industry topics. We also provide complimentary physical design aids to designers and engineers — as well as teachers and students — that highlight technical aspects of injection molding to help create efficient, well-designed parts. We believe these educational materials are key aspects of our lead generation efforts. 

 

12

 

Marketing represents the face of Proto Labs, so it is our goal to actively and intelligently engage buyers and engineers across multiple mediums — whether print, online, social media or in person. By doing this, we gain new customers, drive sales and build brand equity.

 

Sales and Customer Service

 

We maintain an internal sales team trained in the basics of part design and the capabilities of our manufacturing product lines, as well as the key advantages of our processes over alternate methods of custom parts manufacturing. We organize our sales team into complementary roles: business development, account management and strategic account management, with the former focused on selling to new customer companies within targeted market segments and the latter two focused on expanding sales within existing customer companies. 

 

We believe our sales staff is adept at researching customer companies and networking to find additional customers who may have a need for our products. We also have a team of customer service engineers who can support highly technical engineering discussions with product developers and engineers as required during the sales process. Our revenue is generated from a diverse customer base, with no single customer company representing more than 3% of our total revenue in 2021. We have served over 85% of the 2021 Fortune 500 companies in our target industries.

 

 

Competition

 

The market for custom parts manufacturing is fragmented, highly competitive and subject to rapid and significant technological change. Our potential competitors include:

 

 

Other custom parts manufacturers. There are thousands of alternative manufacturing machine shops, injection molding suppliers, sheet metal fabricators, and 3D printing service bureaus and vendors worldwide. The size and scale of these businesses range from very small specialty shops to large, high-volume production manufacturers.

 

 

Brokers. There are an increasing number of digital brokers that provide product developers with a network of manufacturers, generally a subset of the other custom parts manufacturers described above, that can offer a diverse range of capabilities, capacity, competitive pricing and desired lead times to meet customer demand.

 

 

Captive in-house product manufacturing. Many larger companies undertaking product development have established additive rapid prototyping (3D printing), CNC machining, injection molding or sheet metal capabilities internally to support prototyping or manufacturing requirements of their product developers and engineers.

 

We believe that the key competitive factors in our industry include:

 

 

Quality: dimensional accuracy, surface finish, color and cleanliness;

 

 

Speed: turnaround time for quotations and parts;

 

 

Reliability: highly reliable delivery with predictable lead times;

 

 

Service: overall customer experience, from web interface to post-sales support;

 

 

Capability: range of part sizes and dimensional complexities supported, variety of manufacturing processes offered, materials supported and post-processing provided;

 

 

Scale: ability to support thousands of part designs in parallel;

 

13

 

 

Capacity: ability to manage peaks in demand with very short lead times and no minimum order quantities; and

 

 

Price: competitive mold and part pricing, including total cost of ownership.

 

We believe that our digital end-to-end manufacturing capability positions us favorably and has enabled us to become a leader in our markets. We also believe that substantially all of our current direct competitors are smaller than us in terms of size of operations, revenue, number of customers and volume of parts sold, and generally lack our technological capabilities, or where developed at scale, have yet to operate profitably. However, our industry is evolving rapidly and other companies, including potentially larger and more established companies with developed technological capabilities, may begin to focus on low volume, high mix custom parts manufacturing. These companies could more directly compete with us, along with our existing competitors, and could also launch new products and product lines that we do not offer that may quickly gain market acceptance. Any of the foregoing could adversely affect our ability to attract customers.

 

 

Corporate Responsibility and Sustainability

 

Our corporate responsibility and sustainability practices are built on a foundation of shared fundamental values of teamwork, trust and achievement, and help us to deliver strong financial results that create value for our Company and our shareholders in a way that respects our communities and the environments in which we operate. The Company's three core values are embodied in everything we do.

 

Teamwork – We are dedicated to the idea that a diversity of minds is better than one. Through open communication, we strive to collaborate with and include all of our colleagues to maximize our creativity and to make our good ideas great. We respect each other’s opinions. We help colleagues who are struggling to improve, so our success is everyone’s success.

Trust – Our integrity is built on honest answers to our customers and colleagues. It is okay to make mistakes if we use them to learn. We navigate difficult situations with compassion. The success of our Company depends on the success of our people.

Achievement – Speed and innovation are the cornerstones of our success. We are committed to being a solution for getting things done quickly and sustainably and a catalyst for great ideas for our shareholders, customers, the environment and each other. We are responsible for our performance, our results and our future.

 

Workforce Demographics

 

As of December 31, 2021, we had 2,663 full-time employees, including 1,826 full-time employees in the United States, 759 full-time employees in Europe and 78 full-time employees in Japan. We also regularly use independent contractors and other temporary employees across the organization to augment our regular staff. We believe that our future success will depend in part on our continued ability to attract, hire and retain qualified, diverse and inclusive personnel.

 

We are an equal opportunity employer, and we believe that a diverse workforce made up of people with different ideas, strengths, interests and cultural backgrounds drives employee and business success. Our workforce is composed of a diverse group of engineers, technicians and business professionals from around the world and every walk of life.

 

We believe our employees are critical to our success and continually seek employee feedback to enhance employee engagement. In 2021, our attrition rates were higher than normal. Our attrition rates were 17%, 20% and 8% in the United States, Europe and Japan, respectively.

 

14

 

Compensation

 

We believe our success depends in large measure on our ability to attract, retain and motivate a broad range of employees to be successful in a dynamic and changing business environment, and that a competitive compensation program is essential. In determining employee compensation, our executive leadership team reviews and considers several factors, including individual and corporate performance, input from managers, competitor market data from third party compensation surveys, our compensation philosophy and key principles, and the leadership’s collective experience and knowledge. Annually, our executive leadership team reviews input from managers throughout our organization, including recommendations as to compensation levels that the managers believe are commensurate with an individual’s job performance, skills, experience, qualifications, criticality to our company and development/career opportunities. We also award long-term equity-based compensation to high performing employees and managers who have the greatest impact on the creation of shareholder value to further align the interests of our employees and shareholders.

 

Diversity, Equity and Inclusion

 

At Protolabs, diversity, equity and inclusion matters. We are committed to nurturing a culture where we celebrate diversity, equity and inclusivity as a way of life. Our diversity and inclusion efforts start at the top with our board regularly reviewing initiatives. Our Diversity, Equity and Inclusion (DEI) Leadership Council was established to promote honest conversations, influence best practices and educate our employees. Our DEI Leadership Council members are employee representatives chosen from various functions and locations to work directly with our leadership team to drive change in our work environment. As we continue to grow, we will continue to emphasize employee safety and having an inclusive work environment as top priorities. Our goal is to build diverse teams throughout the global organization and be a role model for the communities where we work and live. Uniqueness defines us as a company, from our custom products to our employees. Our pledge is to promote a global culture that invites, recognizes and embraces each individuals contributions to make a stronger “US”.

 

Health, Safety and Wellness

 

We strive to continuously improve our employees’ health, safety and wellness. Our “I Am” safety program teaches that safety is the responsibility of every individual in our organization. We believe this program is the basis for our excellent safety compliance record. We believe that our employees are our most valuable asset, and their safety and health is among our top priorities.

 

In addition to concentrating on employee safety in the workplace, we also focus on the overall wellbeing of our employees. We continue to invest in a variety of employee health and wellness programs, including gym membership discounts, on-site yoga classes at certain facilities, wellness newsletters and learning sessions, and providing various Employee Assistance Programs.

 

In response to the COVID-19 pandemic, we are closely monitoring infection rates to ensure appropriate safety measures are in place for the well-being of our employees, customers, and suppliers. Our goal is to minimize the spread of illness, while ensuring we can deliver on our customers' expectations. In accordance with the guidance provided by both the World Health Organization and the U.S. Centers for Disease Control and Prevention, we established safety measures, including social distancing and work-from-home guidelines for positions that can be performed remotely. In addition, we increased our focus on employee mental health during the pandemic by providing employees with mental health resources and enhanced Employee Assistance Programs.

 

Education

 

We firmly believe that investing in the education of our employees is critical to our success. Our employees are provided access to a robust learning management system that offers hundreds of courses on various topics ranging from compliance to leadership and for job-specific skills. In 2021, excluding Hubs, employees spent an average of 14 hours per employee in training sessions. We provide an Educational Assistance Program for employees, which offers financial assistance for both professional and personal development to inspire employees to continuously enhance their skills and knowledge. We have a customized leadership development program designed for current and aspiring managers in search of developing their leadership skills. The program provides training on topics that are aligned with our Leadership Principles and our Core Values.

 

In order to ensure our industry remains robust, we are committed to supporting Science, Technology, Engineering and Mathematics (STEM) programs in the cities where we have facilities. Through the Protolabs Foundation, we provide STEM education grants to eligible organizations. In addition, we partner with schools, colleges and universities to provide various outreach opportunities and sponsorships.

 

15

 

Charitable Giving

 

We pride ourselves in being a responsible corporate citizen through our Protolabs Foundation. We support several charitable causes with our Employee Matching, Cool Ideas, and Major Gifts Programs. The Foundation’s efforts serve as a sustaining investment in the future of the communities where our employees live and work, and also a commitment to build talent to support the future employment needs of the manufacturing industry. ProtoGivers, our employee led community involvement team, organizes a wide variety of charitable activities, including blood drives, working for Habitat for Humanity projects, volunteering for Feed My Starving Children, and making financial contributions to charitable causes, many of which are matched through the Protolabs Foundation Employee Giving Program. Our financial support and our community outreach programs are intended to improve the quality of life in the communities where we have facilities.

 

Environment

 

We are committed to having a positive impact on the environment. In 2021, we were awarded a Manufacturing Leadership Award from the National Association of Manufacturers (NAM) in the Sustainability Leadership category. This category recognizes companies embracing manufacturing processes that are non-polluting, conserve energy and natural resources, and are economically sound and safe for employees, communities, and consumers. In 2020, we installed nearly 1,900 solar panels on the roof of our facility in Plymouth, MN, one of our larger manufacturing facilities. The solar array will cover 20 percent of our future energy use and will offset the equivalent of 1.3 million pounds of CO2 and preserve 775 acres of forest annually.

 

We strive to maximize recycling in both our manufacturing and office facilities. In our manufacturing facilities, we recycle metal, plastic and water used throughout the manufacturing processes. Finally, the Green Team, an employee-led organization, educates our employees on how they can positively impact the environment, both at work and at home.

 

Intellectual Property

 

We regard our patents, trademarks, service marks, trade dress, trade secrets, copyrights, domain names and other intellectual property as valuable to our business and rely on patent, trademark and copyright law, trade secret protection and confidentiality and/or license agreements with our employees, customers, vendors and others to protect our proprietary rights. We register our patents, trademarks and service marks in the United States and other jurisdictions as we deem appropriate. As of December 31, 2021, we owned and had applications pending for patents relating to various aspects of our quoting and manufacturing processes as follows:

 


 

Jurisdiction

  Issued Patents     Applications Pending  

United States

  25     14  

United Kingdom

  2     0  

 

Our patents have expiration dates ranging from 2022 to 2038. We also owned approximately 27 registered United States trademarks or service marks as of December 31, 2021, with corresponding registered protection in Europe and Japan for the most important of these marks such as PROTO LABS, PROTOMOLD, FIRSTCUT, PROTOQUOTE, FIRSTQUOTE, PROTOFLOW and FINELINE, corresponding approved protection in Canada for PROTO LABS, FIRSTCUT and FINELINE, and corresponding registered protection in Australia, Canada and Mexico for PROTOMOLD. There can be no assurance that the steps we take to protect our proprietary rights will be adequate or that third parties will not infringe or misappropriate such rights. We have been subject to claims and expect to be subject to legal proceedings and claims from time to time in the ordinary course of our business. In particular, we may face claims from third parties that we have infringed their patents, trademarks or other intellectual property rights. Such claims, even if not meritorious, could result in the expenditure of significant financial and managerial resources. Any unauthorized disclosure or use of our intellectual property could make it more expensive to do business and harm our operating results.

 

Available Information

 

Our principal executive offices are located at 5540 Pioneer Creek Drive, Maple Plain, Minnesota 55359 and our telephone number is (763) 479-3680. Our website address is www.protolabs.com. Information on our website does not constitute part of this Annual Report on Form 10-K or any other report we file or furnish with the SEC. We provide free access to various reports that we file with or furnish to the SEC through our website as soon as reasonably practicable after they have been filed or furnished. These reports include, but are not limited to, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and any amendments to these reports. Our SEC reports can be accessed through the investor relations section of our website.

 

 

The SEC maintains a website that contains reports, proxy and information statements, and other information regarding issuers that file information electronically with the SEC. The SEC’s website is www.sec.gov.

 

Executive Officers of the Registrant

 

Set forth below are the names of our current executive officers, their ages, titles, the year first appointed as an executive officer, and employment for the past five years:

 

Robert Bodor

49

President, Chief Executive Officer and Director

Michael R. Kenison

50

Vice President/General Manager – Americas

Daniel Schumacher

47

Interim Chief Financial Officer

Arthur R. Baker III

54

Chief Technology Officer

Bjoern Klaas

52

Vice President/General Manager and Managing Director – Europe, Middle East and Africa

 

Executive officers of the Company are elected at the discretion of the board of directors with no fixed terms. There are no family relationships between or among any of the executive officers or directors of the Company.

 

Robert Bodor. Dr. Bodor has served as our President and Chief Executive Officer since March 2021. Prior to his current position, Dr. Bodor served as Vice President/General Manager - Americas since 2015. From July 2013 to January 2015, Dr. Bodor served as our Chief Technology Officer. From December 2012 to June 2013, Dr. Bodor served as our Director of Business Development. Prior to joining Proto Labs, from January 2011 to December 2012, Dr. Bodor held several roles at Honeywell, most recently leading SaaS business offerings for Honeywell’s Life Safety Division.

 

Michael R. Kenison. Mr. Kenison has served as our Vice President/General Manager - Americas since June 2021. Prior to his current position, Mr. Kenison led various teams at the company, including as Vice President of Manufacturing, a role he held since 2013. Before his tenure at Protolabs, Mr. Kenison served in several leadership roles within the industry, including as Vice President of Manufacturing at Cardiac Science, Inc. - a medical device provider of defibrillator technology.

 

Daniel Schumacher. Mr. Schumacher has served as our Interim Chief Financial Officer and principal financial and accounting officer since December 2021. Prior to his current role, Mr. Schumacher led investor communication, forecasting and planning, and business intelligence for the Company as Vice President of Investor Relations and FP&A from April 2017 to December 2021. From 2015 to 2017, Mr. Schumacher served as finance director in the Americas Finance & Operations organization of Stratasys, Inc, a 3D Printing OEM. From 2001 to 2015, Mr. Schumacher was in finance leadership roles of increasing responsibility for Rockwell Automation, an industrial automation company.

 

Arthur R. Baker III. Dr. Baker has been our Chief Technology Officer since May 2016. Prior to joining Proto Labs, Dr. Baker served as Chief Technology Officer of PaR Systems, a robotics and specialty machine tool builder from 2014 to 2016. From 2005 to 2014, Dr. Baker held multiple positions at MTS Systems, including General Manager of the Test Division, Chief Technology Officer, and Vice President of Engineering and Operations. MTS Systems is a provider of mechanical testing and simulation systems for automotive, aerospace, medical, civil-seismic and general research.

  

Bjoern Klaas. Mr. Klaas has led our Company’s business in Europe, Middle East and Africa as the Vice President and Managing Director since December 2017. Prior to joining Proto Labs, Mr. Klaas held key positions with global polymer supplier PolyOne from 2012 to 2017, most recently as its Vice President and General Manager for its ColorMatrix Group headquartered in the United States. From 2008 to 2012, Mr. Klaas worked at Colorant-Chromatics, a global leader for high temperature polymer formulations, as the General Manager for the global business.

 

 

Item 1A. Risk Factors

 

The following are the significant factors that could materially adversely affect our business, financial condition, or operating results, as well as adversely affect the value of an investment in our common stock. The risks described below are not the only risks facing our Company. Risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and operating results.

 

Risks Relating to Our Business

 

We face significant competition and expect to face increasing competition in many aspects of our business, which could cause our operating results to suffer.

 

The market for custom parts manufacturing is fragmented and highly competitive. We compete for customers with a wide variety of custom parts manufacturers and methods. Some of our current and potential competitors include captive in-house product lines, other custom parts manufacturers, brokers of custom parts and alternative manufacturing vendors such as those utilizing 3D printing processes. Moreover, some of our existing and potential competitors are researching, designing, developing and marketing other types of products and product lines. We also expect that future competition may arise from the development of allied or related techniques for custom parts manufacturing that are not encompassed by our patents, from the issuance of patents to other companies that may inhibit our ability to develop certain products and from improvements to existing technologies. Furthermore, our competitors may attempt to adopt and improve upon key aspects of our business model, such as development of technology that automates much of the manual labor conventionally required to quote and manufacture custom parts, implementation of interactive web-based and automated user interface and quoting systems and/or building scalable operating models specifically designed for efficient custom production. Third-party CAD software companies may develop software that mold-makers, injection molders and CNC machine shops could use to compete with our business model. Additive manufacturers may develop stronger, higher temperature resins or introduce other improvements that could more effectively compete with us on part quality. We may also, from time to time, establish alliances or relationships with other competitors or potential competitors. To the extent companies terminate such relationships and establish alliances and relationships with our competitors, our business could be harmed.

  

Existing and potential competitors may have substantially greater financial, technical, marketing and sales, manufacturing, distribution and other resources and name recognition than us, as well as experience and expertise in intellectual property rights and operating within certain international locations, any of which may enable them to compete effectively against us.

 

Though we plan to continue to expend resources to develop new technologies, processes and product lines, we cannot assure you that we will be able to maintain our current position or continue to compete successfully against current and future sources of competition. Our challenge to develop new products manufactured internally is finding product lines for which our automated quotation and manufacturing processes offer an attractive value proposition, and we may not be able to find any new product lines with potential economies of scale similar to our existing product lines. We mitigate this risk through products offered by our manufacturing partner network via our acquisition of Hubs in 2021. If we do not keep pace with technological change and introduce new technologies, processes and product lines, the demand for our products and product lines may decline and our operating results may suffer.

 

We may not timely and effectively scale and adapt our existing technology, processes and infrastructure to meet the needs of our business.

 

A key element to our continued growth is the ability to quickly and efficiently quote an increasing number of product developer and engineer submissions across geographic regions and to manufacture the related parts. This will require us to timely and effectively scale and adapt our existing technology, processes and infrastructure to meet the needs of our business. With respect to our websites and quoting technology, it may become increasingly difficult to maintain and improve their performance, especially during periods of heavy usage and as our solutions become more complex and our user traffic increases across geographic regions. Similarly, our manufacturing automation technology may not enable us to process the large numbers of unique designs and efficiently manufacture the related parts in a timely fashion to meet the needs of product developers and engineers as our business continues to grow. Any failure in our ability to timely and effectively scale and adapt our existing technology, processes and infrastructure could negatively impact our ability to retain existing customers and attract new customers, damage our reputation and brand, result in lost revenue, and otherwise substantially harm our business and results of operations.

 

 

Economic uncertainty arising from the recent COVID-19 pandemic has adversely affected our business and results of operations and could continue to do so in the future.

 

On March 11, 2020, the World Health Organization declared the outbreak of the novel coronavirus (COVID-19) a pandemic. The COVID-19 pandemic and associated counter-acting measures implemented by governments around the world, as well as increased business uncertainty, has adversely affected our business and results of operations and could continue to do so in the future. The Company is monitoring the global COVID-19 pandemic and has taken steps to mitigate the risks to our employees, customers, suppliers and other stakeholders. The current business environment and quickly evolving market conditions require significant management judgment to interpret and quantify the actual and potential impact on our assumptions about future financial performance and operating cash flows. To the extent that changes in the current business environment continue to impact our ability to achieve levels of forecasted operating results and cash flows, if our stock price were to trade below book value per share for an extended period of time and/or should other events occur indicating the carrying value of our assets might be impaired, we may be required to recognize impairment losses on goodwill, intangible and tangible assets.

 

Numerous factors may cause us not to maintain the revenue growth that we have historically experienced.

 

Although our revenue has grown over the past five years from $344.5 million for the year ended December 31, 2017 to $488.1 million for the year ended December 31, 2021, we may not be able to maintain our historical rate of revenue growth. We believe that our continued revenue growth will depend on many factors, a number of which are out of our control, including among others, our ability to:

 

 

retain and further penetrate existing customer companies, as well as attract new customer companies;

 

 

 

 

consistently execute on custom part orders in a manner that satisfies product developers’ and engineers’ needs and provides them with a superior experience;

 

 

 

 

develop new technologies or manufacturing processes and broaden the range of parts we offer;

 

 

 

 

successfully execute on our international strategy and expand into new geographic markets;

 

 

 

 

capitalize on product developer and engineer expectations for access to comprehensive, user-friendly e-commerce capabilities 24 hours per day, 7 days per week;

 

 

 

 

increase the strength and awareness of our brand across geographic regions;

 

 

 

 

respond to changes in product developer and engineer needs, technology and our industry;

     
  successfully integrate operations and offerings of acquisitions;
 

 

 

 

react to challenges from existing and new competitors;

 

 

 

  continue to attract and retain R&D professionals who will continue to expand our technologies; and
     
 

respond to an economic recession which negatively impacts manufacturers' ability to innovate and bring new products to market.

 

We cannot assure you that we will be successful in addressing the factors above and continuing to grow our business and revenue.

 

 

Interruptions to, or other problems with, our website and interactive user interface, information technology systems, manufacturing processes or other operations could damage our reputation and brand and substantially harm our business and results of operations.

 

The satisfactory performance, reliability, consistency, security and availability of our websites and interactive user interface, information technology systems, manufacturing processes and other operations are critical to our reputation and brand, and to our ability to effectively service product developers and engineers. Any interruptions or other problems that cause any of our websites, interactive user interface or information technology systems to malfunction or be unavailable, or negatively impact our manufacturing processes or other operations, may damage our reputation and brand, result in lost revenue, cause us to incur significant costs seeking to remedy the problem and otherwise substantially harm our business and results of operations.

 

A number of factors or events could cause such interruptions or problems, including among others: human and software errors, design faults, challenges associated with upgrades, changes or new facets of our business, power loss, telecommunication failures, fire, flood, extreme weather, political instability, acts of terrorism, war, break-ins and security breaches, contract disputes, labor strikes and other workforce-related issues, capacity constraints due to an unusually large number of product developers and engineers accessing our websites or ordering parts at the same time, and other similar events. These risks are augmented by the fact that our customers come to us largely for our quick-turn manufacturing capabilities and that accessibility and turnaround speed are often of critical importance to these product developers and engineers. We are dependent upon our facilities through which we satisfy all of our production demands and in which we house all of the computer hardware necessary to operate our websites and systems as well as managerial, customer service, sales, marketing and other similar functions, and we have not identified alternatives to these facilities or established fully redundant systems in multiple locations. However, we have back-up computing systems for each of our United States, European and Japanese operations. In addition, we are dependent in part on third parties for the implementation and maintenance of certain aspects of our communications and production systems, and therefore preventing, identifying and rectifying problems with these aspects of our systems is to a large extent outside of our control.

 

Moreover, the business interruption insurance that we carry may not be sufficient to compensate us for the potentially significant losses, including the potential harm to the future growth of our business that may result from interruptions in our product lines as a result of system failures.

 

We store confidential customer information in our systems that, if breached or otherwise subjected to unauthorized access, may harm our reputation or brand or expose us to liability.

 

Our system stores, processes and transmits our customers’ confidential information, including the intellectual property in their part designs and other sensitive data. We rely on encryption, authentication and other technologies licensed from third parties, as well as administrative and physical safeguards, to secure such confidential information. Any compromise of our information security could damage our reputation and brand and expose us to a risk of loss, costly litigation and liability that would substantially harm our business and operating results. We may not have adequately assessed the internal and external risks posed to the security of our company’s systems and information and may not have implemented adequate preventative safeguards or take adequate reactionary measures in the event of a security incident. In addition, most states have enacted laws requiring companies to notify individuals and often state authorities of data security breaches involving their personal data. These mandatory disclosures regarding a security breach often lead to widespread negative publicity, which may cause our existing and prospective customers to lose confidence in the effectiveness of our data security measures. Any security breach, whether successful or not, would harm our reputation and brand and could cause the loss of customers.

 

Aspects of our business are subject to privacy, data use and data security regulations, which may impact the way we use data to target customers.

 

Privacy and security laws and regulations may limit the use and disclosure of certain information and require us to adopt certain cybersecurity and data handling practices that may affect our ability to effectively market our services to current, past or prospective customers. In many jurisdictions consumers must be notified in the event of a data security breach, and such notification requirements continue to increase in scope and cost. The changing privacy laws in the United States, Europe and elsewhere—including the General Data Protection Regulation (GDPR) in the European Union, which became effective May 25, 2018, and the California Consumer Privacy Act of 2018, which was enacted on June 28, 2018, and became effective on January 1, 2020—create new individual privacy rights and impose increased obligations, including disclosure obligations, on companies handling personal data. The impact of these continuously evolving laws and regulations could have a material adverse effect on the way we use data to digitally market and pursue our customers.

 

 

Global economic conditions may harm our ability to do business, increase our costs and negatively affect our stock price.

 

The prospects for economic growth in regions where we operate remain uncertain and could worsen. Economic concerns and other issues such as reduced access to capital for businesses may cause product developers and engineers to further delay or reduce the product development projects that our business supports. Given the continued uncertainty concerning the global economy, we face risks that may arise from financial difficulties experienced by our suppliers, product developers, and engineers and other related risks to our business.

 

We operate a global business that exposes us to additional risks.

 

We have established our operations in the United States, Europe and Japan and are seeking to further expand our international operations. In addition to English, our website is available in British English, French, German, Italian, Japanese and Spanish. Our international revenue accounted for approximately 21%, 20% and 22% of our total revenue in the years ended December 31, 2021, 2020 and 2019, respectively. The future growth and profitability of our international business is subject to a variety of risks and uncertainties. Many of the following factors have adversely affected our international operations and sales to customers located outside of the United States and may again in the future:

 

 

difficulties in staffing and managing foreign operations, particularly in new geographic locations;

 

 

 

 

challenges in providing solutions across a significant distance, in different languages and among different cultures;

 

 

 

 

rapid changes in government, economic and political policies and conditions, political or civil unrest or instability, terrorism or epidemics, and other similar outbreaks or events;

 

 

 

 

economic uncertainty, including significant volatility in global stock markets and currency exchange rates, resulting from Brexit;

 

 

 

 

fluctuations in foreign currency exchange rates;

 

 

 

 

differences in product developer and engineer preferences and means of procuring parts;

 

 

 

 

compliance with and changes in foreign laws and regulations, as well as U.S. laws affecting the activities of U.S. companies abroad, including those associated with export controls, tariffs and embargoes, other trade restrictions and antitrust and data privacy concerns;

 

 

 

 

different, complex and changing laws governing intellectual property rights, sometimes affording companies lesser protection in certain areas;

 

 

 

 

differing levels of use of the Internet or 3D CAD software;

 

 

 

 

seasonal reductions in business activity in certain parts of the world, particularly during the summer months in Europe and holiday season;

 

 

 

 

higher costs of doing business internationally;

 

 

 

 

interruptions resulting from any events affecting raw material supply or manufacturing capabilities abroad;

 

 

 

 

protectionist laws and business practices that favor local producers and service providers;

 

 

 

 

taxation;

 

 

 

 

energy costs;

 

 

 

 

restrictions imposed by local labor practices and laws on our business and operations;

 

 

 

 

workforce uncertainty in countries where labor unrest is more common than in the United States;

 

 

 

 

transportation delays; and

 

 

 

 

increased payment risk and higher levels of payment fraud.

 

Our business depends on product developers’ and engineers’ demand for our product lines, the general economic health of current and prospective customers, and companies’ desire or ability to make investments in new products. A deterioration of global, regional or local political, economic or social conditions could affect potential customers in ways that reduce demand for our product lines, disrupt our manufacturing and sales plans and efforts or otherwise negatively impact our business. Acts of terrorism, wars, public health issues and increased energy costs could disrupt commerce in ways that could impair our ability to get products to our customers and increase our manufacturing and delivery costs. We have not undertaken hedging transactions to cover our foreign currency exposure, and changes in foreign currency exchange rates may negatively impact reported revenue and expenses. In addition, our sales are often made on unsecured credit terms, and a deterioration of political, economic or social conditions in a given country or region could reduce or eliminate our ability to collect accounts receivable in that country or region. In any of these events, our results of operations could be materially and adversely affected.

 

 

 

Climate change, or legal, regulatory or market measures to address climate change, may materially adversely affect our financial condition and business operations.

 

Climate change resulting from increased concentrations of carbon dioxide and other greenhouse gases in the atmosphere could present risks to our future operations from natural disasters and extreme weather conditions, such as hurricanes, tornadoes, earthquakes, wildfires or flooding. Such extreme weather conditions could pose physical risks to our facilities and disrupt operation of our supply chain and may increase operational costs. Concern over climate change could result in new legal or regulatory requirements designed to mitigate the effects of climate change on the environment. If such laws or regulations are more stringent than current legal or regulatory requirements, we may experience increased compliance burdens and costs to meet the regulatory obligations and raw material sourcing, manufacturing operations and the distribution of our products may be affected.

 

If a natural or man-made disaster strikes any of our manufacturing facilities, we will be unable to manufacture our products for a substantial amount of time and our sales will decline.

 

All of our in-house manufacturing products are produced in 10 manufacturing facilities, located in Rosemount, Minnesota; Plymouth, Minnesota; Brooklyn Park, Minnesota; Cary, North Carolina; Nashua, New Hampshire (2 facilities); Telford, United Kingdom; Putzbrunn, Germany; Eschenlohe, Germany; and Zama, Kanagawa, Japan. These facilities and the manufacturing equipment we use would be costly to replace and could require substantial lead time to repair or replace. Our facilities may be harmed by natural or man-made disasters, including, without limitation, earthquakes, floods, tornadoes, fires, hurricanes, tsunamis and nuclear disasters.

 

In the event any of our facilities are affected by a disaster, we may:

 

 

be unable to meet the shipping deadlines of our customers;

 

 

 

 

experience disruptions in our ability to process submissions and generate quotations, manufacture and ship parts, provide marketing and sales support and customer service, and otherwise operate our business, any of which could negatively impact our business;

 

 

 

 

be forced to rely on third-party manufacturers;

 

 

 

 

need to expend significant capital and other resources to address any damage caused by the disaster; and

 

 

 

 

lose customers and be unable to regain those customers.

 

We mitigate such risks through the addition of access to a network of manufacturing partners via our acquisition of Hubs in 2021. Although we possess insurance for damage to our property and the disruption of our business from casualties, this insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

 

Any acquisition, strategic relationship, joint venture or investment could disrupt our business and harm our operating results and financial condition.

 

Our business and our customer base have been built primarily through organic growth. However, from time to time, we may selectively pursue acquisitions, strategic relationships, joint ventures or investments that we believe may allow us to complement our growth strategy, increase market share in our current markets or expand into other markets, or broaden our technology, intellectual property or product line capabilities. For example, in April 2014, we acquired FineLine to enable us to offer our customers 3D printing manufacturing processes; in October 2015, we acquired Alphaform to enable us to expand our 3D printing capabilities in Europe; in November 2017, we acquired RAPID to enable us to offer our customers Sheet Metal and expand our CNC Machining processes; and in 2021 we acquired Hubs to provide our customers with on-demand access to a global network of premium manufacturing partners. We cannot forecast the number, timing or size of any future acquisitions or other similar strategic transactions, or the effect that any such transactions might have on our operating or financial results. Such transactions may be complex, time consuming and expensive, and may present numerous challenges and risks including:

 

 

an acquired company, asset or technology not furthering our business strategy as anticipated;

 

 

 

 

difficulties entering and competing in new product or geographic markets and increased competition, including price competition;

 

 

 

 

integration challenges;

 

 

 

 

challenges in working with strategic partners and resolving any related disagreements or disputes;

 

 

 

 

high valuation for a company, asset or technology, or changes in the economic or market conditions or assumptions underlying our decision to acquire;

 

 

 

 

significant problems or liabilities associated with acquired businesses, assets or technologies, including increased intellectual property and employment related litigation exposure;

 

 

 

 

acquisition of a significant amount of goodwill, which could result in future impairment charges that would reduce our earnings; and

 

 

 

 

requirements to record substantial charges and amortization expenses related to certain purchased intangible assets, deferred stock compensation and other items, as well as other charges or expenses.

 

 

 

Any one of these challenges or risks could impair our ability to realize any benefit from our acquisitions, strategic relationships, joint ventures or investments after we have expended resources on them, as well as divert our management’s attention. Any failure to successfully address these challenges or risks could disrupt our business and harm our operating results and financial condition. Moreover, any such transaction may not be viewed favorably by investors or stakeholders.

 

In addition, from time to time we may enter into negotiations for acquisitions, relationships, joint ventures or investments that are not ultimately consummated. These negotiations could result in significant diversion of management time, as well as substantial out-of-pocket costs.

 

Our success depends on our ability to deliver products and product lines that meet the needs of product developers and engineers and to effectively respond to changes in our industry.

 

We derive almost all of our revenue from the manufacture and sale to product developers and engineers of quick-turn low volumes of custom parts for prototyping, support of internal manufacturing and limited quantity product release. Our business has been, and, we believe, will continue to be, affected by changes in product developer and engineering requirements and preferences, rapid technological change, new product and product line introductions and the emergence of new standards and practices, any of which could render our technology, products and product lines less attractive, uneconomical or obsolete. To the extent that our customers’ need for quick-turn parts decreases significantly for any reason, it would likely have a material adverse effect on our business and operating results and harm our competitive position. In addition, CAD simulation and other technologies may reduce the demand for physical prototype parts. Therefore, we believe that to remain competitive, we must continually enhance and improve our technology, product offerings and product lines.

 

In particular, we plan to increase our research and development efforts and to continue to focus a significant portion of those efforts to further develop our technology in areas such as our interactive user interface and manufacturing processes and broaden the range of parts that we are able to manufacture. We believe successful execution of this part of our business plan is critical for our ability to compete in our industry and grow our business, and there are no guarantees we will be able to do so in a timely fashion, or at all. Broadening the range of parts we offer is of particular importance since limitations in manufacturability are the primary reason we are not able to fulfill many quotation requests. There are no guarantees that the resources devoted to executing on this aspect of our business plan will improve our business and operating results or result in increased demand for our products and product lines. Failures in this area could adversely impact our operating results and harm our reputation and brand. Even if we are successful in executing in these areas, our industry is subject to rapid and significant technological change, and our competitors may develop new technologies, processes and product lines that are superior to ours. Our research and development costs were approximately $44.2 million, $36.9 million and $32.7 million for the years ended December 31, 2021, 2020 and 2019, respectively, and there is no guarantee that these costs will enable us to maintain or grow our revenue profitability. Refer to Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K for additional discussion related to research and development costs.

 

Any failure to properly meet the needs of product developers and engineers or respond to changes in our industry on a cost-effective and timely basis, or at all, would likely have a material adverse effect on our business and operating results and harm our competitive position.

 

Our failure to meet our customers' expectations regarding quick turnaround time would adversely affect our business and results of operations.

 

We believe many product developers and engineers are facing increased pressure from global competitors to be first to market with their finished products, often resulting in a need for quick turnaround of custom parts. We believe our ability to quickly quote, manufacture and ship custom parts has been an important factor in our results to date. There are no guarantees we will be able to meet product developers’ and engineers’ increasing expectations regarding quick turnaround time, especially as we increase the scope of our operations. If we fail to meet our customers’ expectations regarding turnaround time in any given period, our business and results of operations will likely suffer.

 

Our failure to meet our customers’ price expectations would adversely affect our business and results of operations.

 

Demand for our product lines is sensitive to price. We believe our competitive pricing has been an important factor in our results to date. Therefore, changes in our pricing strategies can have a significant impact on our business and ability to generate revenue. Many factors, including our production and personnel costs and our competitors’ pricing and marketing strategies, can significantly impact our pricing strategies. If we fail to meet our customers’ price expectations in any given period, demand for our products and product lines could be negatively impacted and our business and results of operations could suffer.

 

Our failure to meet our customers' quality specifications would adversely affect our business and results of operations.

 

We believe many product developers and engineers have a need for specific quality of quick-turn, on-demand custom parts. We believe our ability to create parts with the specifications of the product developers and engineers is an important factor in our results to date. If we fail to meet our customers’ specifications in any given period, demand for our products and product lines could be negatively impacted and our business and results of operations could suffer.

 

 

 

The strength of our brand is important to our business, and any failure to maintain and enhance our brand would hurt our ability to retain and expand our customer base as well as further penetrate existing customers.

 

Since our products and product lines are sold primarily through our websites, the success of our business depends upon our ability to attract new and repeat customers to our websites in order to increase business and grow our revenue. Customer awareness and the perceived value of our brand will depend largely on the success of our marketing efforts, as well as our ability to consistently provide quality custom parts within the required timeframes and positive customer experiences, which we may not do successfully. A primary component of our business strategy is the continued promotion and strengthening of our brand, and we have incurred and plan to continue to incur substantial expense related to advertising and other marketing efforts directed toward enhancing our brand. We have initiated marketing efforts through social media, but this method of marketing may not be successful and subjects us to a greater risk of inconsistent messaging and bad publicity. We may choose to increase our branding expense materially, but we cannot be sure that this investment will be profitable. If we are unable to successfully maintain and enhance our brand, this could have a negative impact on our business and ability to generate revenue.

 

Our business depends in part on our ability to process a large volume of new part designs from a diverse group of product developers and engineers and successfully identify significant opportunities for our business based on those submissions.

 

We believe the volume of new part designs we process and the size and diversity of our customer base give us valuable insight into the needs of our prospective customers. We utilize this industry knowledge to determine where we should focus our development resources. If the number of new part designs we process or the size and diversity of our customer base decrease, our ability to successfully identify significant opportunities for our business and meet the needs of product developers and engineers could be negatively impacted. In addition, even if we do continue to process a large number of new part designs and work with a significant and diverse customer base, there are no guarantees that any industry knowledge we extract from those interactions will be successfully utilized to help us identify significant business opportunities or better understand the needs of product developers and engineers.

 

The loss of one or more key members of our management team or personnel, or our failure to attract, integrate and retain additional personnel in the future, could harm our business and negatively affect our ability to successfully grow our business.

 

We are highly dependent upon the continued service and performance of the key members of our management team and other personnel. The loss of any of these individuals, each of whom is “at will” and may terminate his or her employment relationship with us at any time, could disrupt our operations and significantly delay or prevent the achievement of our business objectives. We believe that our future success will also depend in part on our continued ability to identify, hire, train and motivate qualified personnel. A possible shortage of qualified individuals in the regions where we operate might require us to pay increased compensation to attract and retain key employees, thereby increasing our costs. In addition, we face intense competition for qualified individuals from numerous companies, many of whom have substantially greater financial and other resources and name recognition than us. We may be unable to attract and retain suitably qualified individuals who are capable of meeting our growing operational, managerial and other requirements, or we may be required to pay increased compensation in order to do so. Our failure to attract, hire, integrate and retain qualified personnel could impair our ability to achieve our business objectives.

  

If we fail to grow our business as anticipated, our net sales, gross margin and operating margin will be adversely affected.

 

We are attempting to grow our business substantially. To this end, we have made and expect to continue to make significant investments in our business, including investments in our infrastructure, technology, and marketing and sales efforts. These investments include dedicated facilities expansion and increased staffing, both domestic and international. If our business does not generate the level of revenue required to support our investment, our net sales and profitability will be adversely affected.

 

If we are unable to manage our growth and expand our operations successfully, our reputation and brand may be damaged, and our business and results of operations may be harmed.

 

Over the past several years, we have experienced rapid growth. For example, we have grown from 1,700 full-time employees as of January 1, 2017 to 2,663 full-time employees as of December 31, 2021. We have expanded internationally, including establishing manufacturing operations in Europe in 2005 and Japan in 2009. In 2014, we expanded our product lines with 3D Printing through our acquisition of FineLine. In 2015, we expanded our manufacturing operations and our 3D Printing product lines in Europe through our acquisition of Alphaform. In 2017, we expanded our product lines to include Sheet Metal through our acquisition of RAPID. In 2021, we expanded the breadth of products and lead times we offer through the acquisition of Hubs. We expect this growth to continue and the number of countries and facilities from which we operate to increase in the future. Our ability to effectively manage our anticipated growth and expansion of our operations will require us to do, among other things, the following:

 

 

enhance our operational, financial and management controls and infrastructure, human resource policies, and reporting systems and procedures, in particular as we continue to operate as a global organization;

 

 

 

 

effectively scale our operations, including accurately predicting the need for floor space, equipment, and additional staffing;

 

 

 

  integrate the offer and operations of acquisitions;
     
 

successfully identify, recruit, hire, train, develop, maintain, motivate and integrate additional employees; and

 

 

 

 

expand our international resources.

 

These enhancements and improvements will require significant capital expenditures and allocation of valuable management and employee resources. Furthermore, our growth, combined with the geographical dispersion of our operations, has placed, and will continue to place, a strain on our operational, financial and management infrastructure. Our future financial performance and our ability to execute on our business plan will depend, in part, on our ability to effectively manage any future growth and expansion. There are no guarantees we will be able to do so in an efficient or timely manner, or at all. Our failure to effectively manage growth and expansion could have a material adverse effect on our business, results of operations, financial condition, prospects, and reputation and brand, including impairing our ability to perform to our customers’ expectations.

 

 

If our present single or limited source suppliers become unavailable or inadequate, our customer relationships, results of operations and financial condition may be adversely affected.

 

We acquire substantially all of the manufacturing equipment and certain of our materials that are critical to the ongoing operation and future growth of our business from several third parties. We do not have long-term supply contracts with any of our suppliers and operate on a purchase-order basis. While most manufacturing equipment and materials for our products are available from multiple suppliers, certain of those items are only available from single or limited sources. Should any of our present single or limited source suppliers for manufacturing equipment or materials become unavailable or inadequate, or impose terms unacceptable to us such as increased pricing terms, we could be required to spend a significant amount of time and expense to develop alternate sources of supply, and we may not be successful in doing so on terms acceptable to us, or at all. Natural disasters, such as hurricanes, may affect our supply of materials, particularly resins, from time to time, and we may purchase larger amounts of certain materials in anticipation of future shortages or increases in pricing. Global supply chain disruptions may make scarce materials or supplies critical to our product offers and adversely impact our ability to manufacture and deliver products to our customers on time. In addition, if we were unable to find a suitable supplier for a particular type of manufacturing equipment or material, we could be required to modify our existing business processes and offerings to accommodate the situation. As a result, the loss of a single or limited source supplier could adversely affect our relationship with our customers and our results of operations and financial condition.

 

We may not be able to adequately protect or enforce our intellectual property rights, which could impair our competitive position.

 

Our success and future revenue growth will depend, in part, on our ability to protect our intellectual property. We rely primarily on patents, licenses, trademarks and trade secrets, as well as non-disclosure agreements and other methods, to protect our proprietary technologies and processes globally. Despite our efforts to protect our proprietary technologies and processes, it is possible that competitors or other unauthorized third parties may obtain, copy, use or disclose our technologies and processes. We cannot assure you that any of our existing or future patents will not be challenged, invalidated or circumvented. As such, any rights granted under these patents may not provide us with meaningful protection. We may not be able to obtain foreign patents corresponding to our United States patents. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. If our patents and other intellectual property do not adequately protect our technology, our competitors may be able to offer product lines similar to ours. Our competitors may also be able to develop similar technology independently or design around our patents. Any of the foregoing events would lead to increased competition and lower revenue or gross margin, which would adversely affect our net income.

 

We may be subject to infringement claims.

 

We may be subject to intellectual property infringement claims from individuals, vendors and other companies who have acquired or developed patents in the fields of injection molding, CNC machining, 3D printing, sheet metal fabrication or part production for purposes of developing competing products or for the sole purpose of asserting claims against us. Any claims that our products or processes infringe the intellectual property rights of others, regardless of the merit or resolution of such claims, could cause us to incur significant costs in responding to, defending and resolving such claims, and may prohibit or otherwise impair our ability to commercialize new or existing products. If we are unable to effectively defend our processes, our market share, sales and profitability could be adversely impacted.

 

Our failure to expand our intellectual property portfolio could adversely affect the growth of our business and results of operations.

 

Expansion of our intellectual property portfolio is one of the available methods of growing our revenue and our profits. This involves a complex and costly set of activities with uncertain outcomes. Our ability to obtain patents and other intellectual property can be adversely affected by insufficient inventiveness of our employees, by changes in intellectual property laws, treaties, and regulations, and by judicial and administrative interpretations of those laws, treaties and regulations. Our ability to expand our intellectual property portfolio could also be adversely affected by the lack of valuable intellectual property for sale or license at affordable prices. There is no assurance that we will be able to obtain valuable intellectual property in the jurisdictions where we and our competitors operate or that we will be able to use or license that intellectual property.

 

 

We may be subject to product liability claims, which could result in material expense, diversion of management time and attention and damage to our business and reputation and brand.

 

The prototype parts we manufacture and the parts we manufacture in low volumes may contain undetected defects or errors that are not discovered until after the products have been installed and used by customers. This could result in claims from customers or others, damage to our business and reputation and brand, or significant costs to correct the defect or error.

 

We attempt to include provisions in our agreements with customers that are designed to limit our exposure to potential liability for damages arising from defects or errors in our products. However, it is possible that these limitations may not be effective as a result of unfavorable judicial decisions or laws enacted in the future.

  

The sale and support of our products entails the risk of product liability claims. Any product liability claim brought against us, regardless of its merit, could result in material expense, diversion of management time and attention, damage to our business and reputation and brand, and cause us to fail to retain existing customers or to fail to attract new customers.

 

Government regulation of the Internet and e-commerce is evolving, and unfavorable changes or failure by us to comply with these regulations could substantially harm our business and results of operations.

 

We are subject to general business regulations and laws as well as regulations and laws specifically governing the Internet and e-commerce. Existing and future laws and regulations may impede the growth of the Internet or other online services. These regulations and laws may cover taxation, restrictions on imports and exports, customs, tariffs, user privacy, data protection, pricing, content, copyrights, distribution, electronic contracts and other communications, consumer protection, the provision of online payment services, broadband residential Internet access and the characteristics and quality of products and product lines. It is not clear how existing laws governing issues such as property use and ownership, sales and other taxes, fraud, libel and personal privacy apply to the Internet and e-commerce, especially where these laws were adopted prior to the advent of the Internet and do not contemplate or address the unique issues raised by the Internet or e-commerce. Those laws that do reference the Internet are being interpreted by the courts and their applicability and reach are therefore uncertain. The costs of compliance with these regulations may increase in the future as a result of changes in the regulations or the interpretation of them. Further, any failures on our part to comply with these regulations may subject us to significant liabilities. Those current and future laws and regulations or unfavorable resolution of these issues may substantially harm our business and results of operations.

 

Changes in, or interpretation of, tax rules and regulations may impact our effective tax rate and future profitability.

 

We are a multinational company based in the United States and subject to tax in multiple tax jurisdictions, both domestic and abroad. Our future effective tax rates could be adversely affected by changes in statutory tax rates or interpretation of tax rules, including those set forth in the Tax Cuts and Jobs Act enacted in 2017, and regulations in jurisdictions in which we do business, changes in the amount of revenue or earnings in the countries with varying statutory tax rates, or by changes in the valuation of deferred tax assets and liabilities.

 

In addition, we are subject to audits and examinations of previously filed income tax returns by the Internal Revenue Service, or IRS, and other domestic and foreign tax authorities. We regularly assess the potential impact of such examinations to determine the adequacy of our provision for income taxes and have reserved for potential adjustments that may result from the current examinations. We believe such estimates to be reasonable; however, there is no assurance that the final determination of any examination will not have an adverse effect on our operating results and financial position.

 

We may require additional capital to support business growth, and this capital might not be available on acceptable terms, if at all.

 

We intend to continue to make investments to support our business growth and may require additional funds to respond to business challenges, including the need to complement our growth strategy, increase market share in our current markets or expand into other markets, or broaden our technology, intellectual property or product line capabilities. Accordingly, we may need to engage in equity or debt financings to secure additional funds. If we raise additional funds through future issuances of equity or convertible debt securities, our existing shareholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences and privileges superior to those of holders of our common stock. Any debt financing we secure in the future could involve restrictive covenants relating to our capital raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities, including potential acquisitions. We may not be able to obtain additional financing on terms favorable to us, if at all. If we are unable to obtain adequate financing or financing on terms satisfactory to us when we require it, our ability to continue to support our business growth and to respond to business challenges could be significantly impaired, and our business may be harmed.

 

 

Our operating results and financial condition may fluctuate on a quarterly and annual basis.

 

Our operating results and financial condition may fluctuate from quarter to quarter and year to year, and are likely to continue to vary due to a number of factors, some of which are outside of our control. In addition, our actual or projected operating results may fail to match our past performance. These events could in turn cause the market price of our common stock to fluctuate. If our operating results do not meet the expectations of securities analysts or investors, who may derive their expectations by extrapolating data from recent historical operating results, the market price of our common stock will likely decline.

 

Our operating results and financial condition may fluctuate due to a number of factors, including those listed below and those identified throughout this “Risk Factors” section:

 

 

the development of new competitive systems or processes by others;

 

 

 

 

the entry of new competitors into our market, whether by established companies or by new companies;

     
  ability to economically source products manufactured by our network of premium manufacturing partners;
     
 

changes in the size and complexity of our organization, including our international operations;

 

 

 

 

levels of sales of our products and product lines to new and existing customers;

 

 

 

 

the geographic distribution of our sales;

 

 

 

 

changes in product developer and engineer preferences or needs;

 

 

 

 

changes in the amount that we invest to develop, acquire or license new technologies and processes, which we anticipate will generally increase and may fluctuate in the future;

 

 

 

 

delays between our expenditures to develop, acquire or license new technologies and processes, and the generation of sales related thereto;

 

 

 

 

our ability to timely and effectively scale our business during periods of sequential quarterly or annual growth;

 

 

 

 

limitations or delays in our ability to reduce our expenses during periods of declining sequential quarterly or annual revenue;

 

 

 

 

changes in our pricing policies or those of our competitors, including our responses to price competition;

 

 

 

 

changes in the amount we spend in our marketing and other efforts;

 

 

 

 

unexpected increases in expenses as compared to our related accounting accruals or operating plan;

 

 

 

 

the volatile global economy;

 

 

 

 

general economic and industry conditions that affect customer demand and product development trends;

 

 

 

 

interruptions to or other problems with our website and interactive user interface, information technology systems, manufacturing processes or other operations;

 

 

 

 

changes in accounting rules and tax and other laws; and

 

 

 

 

plant shutdowns due to health or weather conditions.

 

Due to all of the foregoing factors and the other risks discussed in this “Risk Factors” section, you should not rely on quarter-to-quarter or year-to-year comparisons of our operating results as an indicator of future performance.

 

 

Our business involves the use of hazardous materials, and we and our suppliers must comply with environmental laws and regulations, which can be expensive and restrict how we do business.

 

Our business involves the controlled storage, use and disposal of hazardous materials. We and our suppliers are subject to federal, state and local as well as foreign laws and regulations governing the use, manufacture, storage, handling and disposal of these hazardous materials. Although we believe that the safety procedures utilized by us and our suppliers for handling and disposing of these materials comply with the standards prescribed by these laws and regulations, we cannot eliminate the risk of accidental contamination or injury from these materials. In the event of an accident, state, federal or foreign authorities may curtail the use of these materials and interrupt our business operations. We do not currently maintain hazardous materials insurance coverage. If we are subject to any liability as a result of activities involving hazardous materials, our business and financial condition may be adversely affected and our reputation and brand may be harmed.

 

If we are unable to meet quality standards applicable to our manufacturing and quality processes for the parts we manufacture, our business, financial condition or operating results could be harmed.

 

As a manufacturer of CNC-machined and injection-molded custom parts, we conform to certain international standards, including International Organization for Standardization, or ISO, 9001:2015 for our injection molding facilities and the AS9001D standard for our CNC-machined facilities in Minnesota. In North Carolina, we conform to the ISO 9001:2015 standard for our plastics manufacturing and the AS9100D standard for our metals manufacturing. In New Hampshire, we conform to the ISO 9001:2015 for our sheet metal custom parts and the AS9100D standards for our CNC-machined custom parts. We also conform to international standard ISO 9001:2015 at our manufacturing facilities in Putzbrunn, Germany and Eschenlohe, Germany. Additionally, we conform to international standard ISO 13485 at our manufacturing facility in Eschenlohe, Germany and international standard ISO 14001 at our manufacturing facility in Putzbrunn, Germany. Lastly, we conform to international standards ISO 9001, ISO 14001 and ISO 27001 at our facilities in Japan. If any system inspection reveals that we are not in compliance with applicable standards, registrars may take action against us, including issuing a corrective action request or discontinuing our certifications. If any of these actions were to occur, it could harm our reputation as well as our business, financial condition and operating results.

 

We are subject to payment-related risks.

 

We accept payments using a variety of methods, including credit card, customer invoicing, physical bank check and payment upon delivery. As we offer new payment options to our customers, we may be subject to additional regulations, compliance requirements and fraud risk. For certain payment methods, including credit and debit cards, we pay interchange and other fees, which may increase over time and raise our operating costs and lower profitability. We rely on third parties to provide payment processing services, including the processing of credit cards, debit cards or electronic checks, and it could disrupt our business if these companies become unwilling or unable to provide these services to us. We are also subject to payment card association operating rules, certification requirements and rules governing electronic funds transfers, which could change or be reinterpreted to make it difficult or impossible for us to comply. If we fail to comply with these rules or requirements, we may be subject to fines and higher transaction fees and lose our ability to accept credit and debit card payments from our customers, process electronic funds transfers, or facilitate other types of online payments, and our business and operating results could be adversely affected.

 

 

Risks Relating to Ownership of Our Common Stock

 

Our stock price has been and may continue to be volatile.

 

In the year ended December 31, 2021, our common stock traded as high as $286.57 and as low as $47.57. The market for our common stock may become less active, liquid or orderly, which could depress the trading price of our common stock. Some of the factors, many of which are outside of our control, that may cause the market price of our common stock to fluctuate include:

 

 

fluctuations in our financial condition and operating results;

 

 

 

 

our ability to retain and attract customers and increase net sales;

 

 

 

 

pricing pressures due to competition or otherwise and changes in gross margins;

 

 

 

 

changes in general economic and market conditions, economic uncertainty and changes in product development activity levels;

 

 

 

 

announcements by us or our competitors of technological innovations or new product or product lines offerings or significant acquisitions;

 

 

 

 

timing, effectiveness, and costs of expansion and upgrades of our offerings, systems and infrastructure;

 

 

 

 

changes in key personnel;

 

 

 

 

success in entry into new markets and expansion efforts;

 

 

 

 

the public’s response to press releases or other public announcements by us or third parties, including our filings with the Securities and Exchange Commission and announcements relating to litigation;

 

 

 

 

the projections we may provide to the public, any changes in these projections or our failure to meet these projections;

 

 

 

 

the issuance of new or updated research or reports by any securities or industry analysts who follow our common stock, changes in analysts’ financial estimates or ratings, and failure of securities analysts to initiate or maintain coverage of our common stock;

 

 

 

 

changes in the market valuations of similar companies;

 

 

 

 

significant lawsuits, including patent or shareholder litigation;

 

 

 

 

changes in laws or regulations applicable to us;

 

 

 

 

changes in accounting principles;

 

 

 

 

the sustainability of an active trading market for our common stock;

 

 

 

 

future sales of our common stock by us or our shareholders, including sales by our officers, directors and significant shareholders;

 

 

 

 

share price and volume fluctuations attributable to inconsistent trading levels of our shares; and

 

 

 

 

other events or factors, including those resulting from war, acts of terrorism, natural disasters or responses to these events.

 

In addition, the stock markets have experienced extreme price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. In the past, shareholders have instituted securities class action litigation following periods of market volatility. If we were to become involved in securities litigation, we could incur substantial costs and our resources and the attention of management could be diverted from our business.

 

 

If securities or industry analysts publish inaccurate or unfavorable research or reports about our business, our stock price and trading volume could decline.

 

The trading market for our common stock depends, in part, on the research and reports that securities or industry analysts publish about us or our business. We do not have any control over these analysts. If one or more of the analysts who covers us downgrades our common stock, changes their opinion of our shares or publishes inaccurate or unfavorable research about our business, our stock price would likely decline. If one or more of these analysts ceases coverage of us or fails to publish reports on us regularly, demand for our common stock could decrease and we could lose visibility in the financial markets, which could cause our stock price and trading volume to decline.

 

Our failure to maintain proper and effective internal controls over financial reporting and otherwise comply with Section 404 of the Sarbanes-Oxley Act or prevent or detect misstatements in our financial statements in the future could harm our business and cause a decrease in our stock price.

 

Ensuring that we have internal financial and accounting controls and procedures adequate to produce accurate financial statements on a timely basis is a costly and time-consuming effort that needs to be re-evaluated frequently. The Sarbanes-Oxley Act requires, among other things, that we maintain effective internal control over financial reporting and disclosure controls and procedures. In particular, we are required to perform annual system and process evaluation and testing of our internal control over financial reporting to allow management and our independent registered public accounting firm to report on the effectiveness of our internal control over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act. If we are not able to comply with the requirements of Section 404 in the future, or if we fail to prevent or detect misstatements in the financial statements we include in our reports filed with the SEC, our business could be harmed and the market price of our common stock could decline.

 

Anti-takeover provisions in our charter documents and Minnesota law might discourage or delay acquisition attempts for us that you might consider favorable.

 

Our Third Amended and Restated Articles of Incorporation, as amended, and Amended and Restated By-Laws contain provisions that may make the acquisition of our company more difficult without the approval of our board of directors. These provisions:

 

 

permit our board of directors to issue up to 10,000,000 shares of preferred stock, with any rights, preferences and privileges as our board may designate, including the right to approve an acquisition or other change in our control;

 

 

 

 

provide that the authorized number of directors may be changed by resolution of the board of directors;

 

 

 

 

provide that all vacancies, including newly created directorships, may, except as otherwise required by law, be filled by the affirmative vote of a majority of directors then in office, even if less than a quorum;

 

 

 

 

provide that shareholders seeking to present proposals before a meeting of shareholders or to nominate candidates for election as directors at a meeting of shareholders must provide notice in writing in a timely manner, and also specify requirements as to the form and content of a shareholder’s notice; and

 

 

 

 

do not provide for cumulative voting rights.

 

We are subject to the provisions of Section 302A.673 of the Minnesota Statutes, which regulates business combinations. Section 302A.673 generally prohibits any business combination by an issuing public corporation, or any of its subsidiaries, with an interested shareholder, which means any shareholder that purchases 10% or more of the corporation’s voting shares within four years following the date the person became an interested shareholder, unless the business combination is approved by a committee composed solely of one or more disinterested members of the corporation’s board of directors before the date the person became an interested shareholder.

 

These anti-takeover provisions could discourage, delay or prevent a transaction involving a change in control of our company, even if doing so would benefit our shareholders. These provisions could also discourage proxy contests and make it more difficult for you and other shareholders to elect directors of your choosing and to cause us to take other corporate actions you desire.

 

We do not expect to pay any cash dividends for the foreseeable future.

 

We have never declared or paid any cash dividends on our common stock, and we do not anticipate that we will pay any such cash dividends for the foreseeable future. We anticipate that we will retain all of our future earnings for use in the business and for general corporate purposes. Any determination to pay dividends in the future will be at the discretion of our board of directors and will depend upon results of operations, financial condition, contractual restrictions, restrictions imposed by applicable law and other factors our board of directors deems relevant.

 

 

Item 1B. Unresolved Staff Comments

 

None.

 

Item 2. Properties

 

We believe that our facilities are well maintained and of sufficient capacity to support our current operations. We have facilities in the following regions:

 

United States

 

Our corporate headquarters are located in Maple Plain, Minnesota in a facility we own encompassing approximately 95,000 square feet of office space. We also own a nearby facility encompassing approximately 35,000 square feet of manufacturing space. We own a facility in Rosemount, Minnesota that encompasses approximately 130,000 square feet of manufacturing and office space. We also own a facility in Plymouth, Minnesota that encompasses approximately 170,000 square feet of manufacturing and office space. In 2018, we purchased a facility in Brooklyn Park, Minnesota that encompasses approximately 215,000 square feet of manufacturing and office space.

 

We own a facility in Cary, North Carolina that encompasses approximately 77,000 square feet of manufacturing and office space. In October 2021, we entered into an agreement to expand our additive manufacturing footprint at a second location, which will add approximately 120,000 square feet at the end of 2022.

 

In 2021, we consolidated facilities in Nashua, New Hampshire reducing our total footprint by approximately 18,000 square feet. In May 2021, we purchased one of our previously leased facilities and continue to lease a second facility. The lease expires in 2026.  The New Hampshire facilities provide a total of approximately 128,000 square feet of manufacturing and office space.

 

In 2021, we leased a facility in Chicago, Illinois that encompasses approximately 10,000 square feet of office space utilized to support our outsourced manufacturing operations.  The lease expires in 2026.

 

Europe

 

Our European operations are headquartered in Telford, United Kingdom in a facility we own encompassing approximately 163,000 square feet of office and manufacturing space. In 2021, we constructed a new facility we own in Putzbrunn, Germany which encompasses approximately 70,000 square feet of office and manufacturing space.

 

We also lease office space in Mosbach, Germany; Le Bourget du Lac, France; Novara, Italy and Nacka, Sweden for sales, customer service and technical support staff. The leases expire at various times from 2023 to 2025. We also lease a manufacturing and office facility encompassing approximately 21,000 square feet in Eschenlohe, Germany. The lease expires in 2024.

 

Our outsourced manufacturing operations are headquartered in Amsterdam, Netherlands in a leased facility encompassing approximately 12,000 square feet of office space.  The lease expires in 2022.

 

Japan

 

Our Japan operations are headquartered in Zama, Kanagawa, Japan (southwest of Tokyo) in a leased facility encompassing approximately 88,000 square feet of office and manufacturing space. The lease expires in 2023.

 

 

Item 3. Legal Proceedings

 

From time to time, we are subject to various legal proceedings and claims that arise in the ordinary course of our business activities. Although the results of litigation and claims cannot be predicted with certainty, as of the date of this Annual Report on Form 10-K, we do not believe we are party to any litigation the outcome of which, if determined adversely to us, would individually or in the aggregate be reasonably expected to have a material adverse effect on our business.

 

Item 4. Mine Safety Disclosures

 

Not applicable.

 

 

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

Our common stock has traded on the New York Stock Exchange (NYSE) under the symbol “PRLB” since February 24, 2012. Prior to that date, there was no public market for our common stock.

 

As of February 9, 2022, we had 12 holders of record of our common stock. The actual number of shareholders is greater than this number of record holders, and includes shareholders who are beneficial owners, but whose shares are held in street name by brokers and other nominees.

 

We have never declared or paid any cash dividends on our capital stock and we do not intend to pay cash dividends on our common stock for the foreseeable future. Any future determination related to our dividend policy will be made at the discretion of our board of directors and will depend on then-existing conditions, including our financial condition, operating results, contractual restrictions, capital requirements, business prospects and other factors our board of directors may deem relevant.

 

 

Performance Graph

 

The following graph shows a comparison from December 31, 2016 through December 31, 2021 of the cumulative total return for our common stock, the S&P 500 Index and the Russell 2000 Index. We have selected the Russell 2000 Index because the Russell 2000 Index measures the performance of the small market capitalization segment of U.S. equity instruments and we are a member company included in the Russell 2000 Index. Such returns are based on historical results and are not intended to suggest future performance. Data for the S&P 500 Index and the Russell 2000 Index assume reinvestment of dividends.

 

graph01.jpg

 

Index

 

12/31/16

   

06/30/17

   

12/31/17

   

06/30/18

   

12/31/18

   

06/30/19

   

12/31/19

   

06/30/20

   

12/31/20

   

06/30/21

   

12/31/21

 

Proto Labs, Inc.

    100.00       130.96       200.58       231.65       219.65       225.94       197.76       219.03       298.73       178.77       100.00  

S&P 500

    100.00       108.24       119.42       121.42       111.97       131.40       144.31       138.48       167.77       191.95       212.89  

Russell 2000

    100.00       104.29       113.14       121.07       99.37       115.43       122.94       106.21       145.52       170.25       165.45  

 

 

Unregistered Sales of Equity Securities and Issuer Purchases of Equity Securities

 

On May 15, 2019, the Board of Directors authorized the repurchase of shares of the Company’s common stock from time to time on the open market or in privately negotiated purchases, at an aggregate purchase price of up to $100 million. On December 8, 2021, the Board of Directors of the Company approved an increase to the total expenditure authorized to $150 million. We have $61.9 million remaining under this authorization. The timing and amount of any share repurchases will be determined by our management based on market conditions and other factors. The term of the program runs through December 31, 2023. 

 

During the year ended December 31, 2021, we repurchased 351,582 shares at an average price of $66.19 per share for an aggregate purchase price of $23.3 million.

 

Period

 

Total Number of Shares Purchased

   

Average Price Paid per Share

   

Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs

   

Maximum Dollar Value of Shares that May Yet Be Purchased Under the Plans or Programs (in thousands)

 

October 1, 2021 through October 31, 2021

    63,819     $ 68.06       63,819     $ 17,800  

November 1, 2021 through November 30, 2021

    47,737     $ 50.84       47,737     $ 15,372  

December 1, 2021 through December 31, 2021

    68,612     $ 50.53       68,612     $ 61,905  
      180,168     $ 56.82       180,168     $ 61,905  

 

 

Item 6. [Reserved]

 

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with the consolidated financial statements and related notes included elsewhere in this Annual Report on Form 10-K. This discussion and analysis contains forward-looking statements that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward- looking statements as a result of various factors, including those set forth under “Risk Factors” and elsewhere in this Annual Report on Form 10-K.

 

Overview

 

We are one of the world’s largest and fastest digital manufacturers of custom prototypes and on-demand production parts. We manufacture prototypes and low-volume production parts for companies worldwide that are under increasing pressure to bring their finished products to market faster than their competition. We utilize injection molding, computer numerical control (CNC) machining, 3D printing and sheet metal fabrication to manufacture custom parts for our customers. Our proprietary technology eliminates most of the time-consuming and expensive skilled labor conventionally required to quote and manufacture parts. In January 2021, we acquired Hubs, a leading online manufacturing platform based in Amsterdam, Netherlands, that provides customers with on-demand access to a global network of premium manufacturing partners. This acquisition creates an extremely comprehensive digital manufacturing offer, offering the broadest set of manufacturing services with the help of a global network of premium manufacturing partners. Our customers conduct nearly all of their business with us over the Internet. We target our products at the millions of product developers and engineers who use three-dimensional computer-aided design (3D CAD) software to design products across a diverse range of end-markets.

 

We have experienced significant growth since our inception. Since we first introduced our Injection Molding product line in 1999, we have steadily expanded the size and geometric complexity of the injection-molded parts we are able to manufacture, and we continue to extend the diversity of materials we are able to support. Similarly, since first introducing our CNC Machining product line in 2007, we have expanded the range of part sizes, design geometries and materials we can support. In 2014, we acquired FineLine Prototyping, Inc. (FineLine) to expand the number of process types we offer to include stereolithography (SL), selective laser sintering (SLS) and direct metal laser sintering (DMLS). In 2017, we acquired RAPID to expand the number of process types we offer to include sheet metal fabrication and expand our CNC machining capability. In 2019, we added Carbon DLS to our 3D printing processes, introduced precision color matching on Injection Molding parts and launched production capabilities for metal 3D printing. In 2021, we acquired Hubs to provide customers with on-demand access to a global network of premium manufacturing partners. We also continually seek to enhance other aspects of our technology and manufacturing processes, including our interactive web-based and automated user interface and quoting system. We intend to continue to invest significantly to enhance our technology and manufacturing processes and expand the range of our existing capabilities with the aim of meeting the needs of a broader set of customers. As a result of the factors described above, many of our customers tend to return to Proto Labs to meet their ongoing needs, with approximately 93%, 93% and 92% of our revenue in 2021, 2020 and 2019, respectively, derived from existing customers.

 

We have established our operations in the United States, Europe and Japan, which we believe are three of the largest geographic markets where product developers and engineers are located. We entered the European market in 2005 and launched operations in Japan in late 2009. We further expanded our operations in the United States through our acquisitions of Fineline in 2014, RAPID in 2017 and Hubs in 2021. Our operations were further expanded in Europe through our acquisitions of Alphaform in 2015 and Hubs in 2021. Our revenue outside of the United States accounted for approximately 21%, 20% and 22% of our consolidated revenue in the years ended December 31, 2021, 2020 and 2019, respectively. We intend to continue to expand our international sales efforts and believe opportunities exist to serve the needs of product developers and engineers in select new geographic regions.

 

We have grown our total revenue from $344.5 million in 2017 to $488.1 million in 2021. During this period, our operating expenses increased from $121.6 million in 2017 to $182.3 million in 2021. Our recent growth in revenue has been accompanied by increased cost of revenues and operating expenses. We expect to increase investment in our operations to support anticipated future growth as discussed more fully below.

 

In addition, we believe that a number of trends affecting our industry have affected our results of operations and may continue to do so. For example, we believe that many of our target product developer and engineer customers are facing three mega trends, which are disrupting long-term product growth models. We believe our customers are facing increased pressure to shorten product life-cycles, to embed products with connectivity driven by the internet of things technology, and to deliver products that are personalized and customized to unique customer specifications. We believe we continue to be well positioned to benefit from these trends, given our proprietary technology that enables us to automate and integrate the majority of activities involved in procuring custom parts. The COVID-19 pandemic has also impacted the manufacturing environment. For example, the pandemic accelerated the digitization of manufacturing as companies pivoted to a work-from-home and socially-distanced manufacturing plant environment. As a result, the adoption of e-commerce was accelerated, which allows opportunity for us to provide valuable solutions to manufacturers looking to build resiliency in their supply chains through fast, on-demand manufacturers. While our business may be positively affected by these trends, our results may also be favorably or unfavorably impacted by other trends that affect product developer and engineer orders for custom parts in low volumes, including, among others, economic conditions, changes in product developer and engineer preferences or needs, developments in our industry and among our competitors, and developments in our customers' industries. For a more complete discussion of the risks facing our business, see Part I, Item 1A. “Risk Factors” of this Annual Report on Form 10-K.

 

 

Key Financial Measures and Trends

 

Revenue

 

Our operations are comprised of three geographic operating segments in the United States, Europe and Japan. Revenue is derived from our Injection Molding, CNC Machining, 3D Printing and Sheet Metal product lines. Injection Molding revenue consists of sales of custom injection molds and injection-molded parts. CNC Machining revenue consists of sales of CNC-machined custom parts. 3D Printing revenue consists of sales of custom 3D-printed parts. Sheet Metal revenue consists of sales of fabricated sheet metal custom parts and assemblies. Our revenue is generated from a diverse customer base, with no single customer company representing more than 3% of our total revenue in 2021. Our historical and current efforts to increase revenue have been directed at gaining new customers and selling to our existing customer base by increasing marketing and selling activities, including:

 

  expanding the breadth and scope of our products by adding more sizes and materials to our offerings;
     
 

the introduction of our 3D Printing product line through our acquisition of FineLine in 2014;

 

 

 

 

expanding 3D printing to Europe through our acquisition of Alphaform in October 2015;

 

 

 

 

the introduction of our Sheet Metal product line through our acquisition of RAPID in 2017;

 

 

 

 

continuously improving the usability of our product lines such as our web-centric applications; and

 

 

 

 

providing customers with on-demand access to a global network of premium manufacturing partners through our acquisition of Hubs in January 2021.

 

During 2021, we served 55,330 unique product developers and engineers who purchased our products through our web-based customer interface, an increase of 26.3% over the same period in 2020. The increase in product developers served was driven primarily by our acquisition of Hubs. Excluding the impact of Hubs, our product developers served increased 5.2% over the same period in 2020.

 

During 2020, we served 43,808 unique product developers and engineers who purchased our products through our web-based customer interface, a decrease of 15.7% over the same period in 2019. The unique product developers and engineers served for the year ended December 31, 2020 has been restated to include unique product developers and engineers who purchased injection molding parts only. Historically we included only those developers who purchased injection molds in our metric. In 2020, the economic uncertainty arising from the COVID-19 pandemic impacted the number of product developers and engineers who purchased our products. 

 

Cost of Revenue, Gross Profit and Gross Margin

 

Cost of revenue consists primarily of raw materials, equipment depreciation, employee compensation including benefits and stock-based compensation, facilities costs and overhead allocations associated with the manufacturing process for molds and custom parts. We expect our personnel-related costs to increase in order to retain and attract top talent and remain competitive in the market. Overall, we expect cost of revenue to increase in absolute dollars.

 

Our business model requires that we invest in our capacity well in advance of demand to ensure we can fulfill the expectations for quick delivery of our products to our customers. Therefore, over the last several years, we have made significant investments in additional factory space, equipment and infrastructure across our geographic segments. We expect to continue to grow in future periods, which will result in the need for additional investments in factory space and equipment. We expect that these additional costs for factory and equipment expansion can be absorbed by revenue growth, and allow gross margins by product line to remain relatively consistent over time. Our addition of Hubs in 2021 provides a complementary opportunity to add revenue growth through the use of premium manufacturing partners, without the significant investments required by our legacy business model.

 

We define gross profit as our revenue less our cost of revenue, and we define gross margin as gross profit expressed as a percentage of revenue. Our gross profit and gross margin are affected by many factors, including our mix of revenue by product line, pricing, sales volume, manufacturing costs, the costs associated with increasing production capacity, the mix between domestic and foreign revenue sources, the mix between revenue produced in our internal manufacturing operations and outsourced to our external manufacturing partners, and foreign exchange rates.

 

 

Operating Expenses

 

Operating expenses consist of marketing and sales, research and development and general and administrative expenses. Personnel-related costs are the most significant component in each of these categories.

 

Our recent growth in operating expenses is mainly due to the launch of our PL 2.0 project, an internal business systems initiative impacting both external customer-facing and internal back-end systems, in the fourth quarter of 2020. During the development of PL 2.0, certain research and development personnel costs were capitalizable as a software development asset. Since the system was placed in service in November 2020, the personnel costs have been expensed as incurred. In addition, amortization expense for the software asset is now being recorded over the systems’ estimated useful lives of seven to ten years. Our business strategy is to continue to be a leading online and technology-enabled manufacturer of quick-turn, on-demand injection-molded, CNC-machined, 3D-printed and sheet metal custom parts for prototyping and low-volume production. In order to achieve our goals, we anticipate continued substantial investments in technology and personnel, resulting in increased operating expenses.

 

Marketing and sales. Marketing and sales expense consists primarily of employee compensation, benefits, commissions, stock-based compensation, marketing programs such as electronic, print and pay-per-click advertising, trade shows and other related overhead, which includes an allocation of information technology expense including amortization of PL 2.0 software assets. We expect sales and marketing expense to increase in the future as we increase the number of marketing and sales professionals and marketing programs targeted to increase our customer base and grow revenue.

 

Research and development. Research and development expense consists primarily of personnel and outside service costs related to the development of new processes and product lines, enhancement of existing product lines, software developed for internal use, maintenance of internally developed software, quality assurance and testing. Costs for internal use software are evaluated by project and capitalized where appropriate under Accounting Standards Codification (ASC) 350-40, Intangibles — Goodwill and Other, Internal-Use Software. We expect research and development expense to increase in the future as we seek to enhance our e-commerce interface technology, internal software and supporting business systems, and continue to expand our product lines.

 

General and administrative. General and administrative expense consists primarily of employee compensation, benefits, stock-based compensation, professional service fees related to accounting, tax and legal and other related overhead, which includes an allocation of information technology expense including amortization of PL 2.0 software assets. We expect general and administrative expense to increase in the future as we continue to grow and expand as a global organization.

 

Other Income, Net

 

Other income, net primarily consists of foreign currency-related gains and losses and interest income on cash balances and investments. Our foreign currency-related gains and losses will vary depending upon movements in underlying exchange rates. Our interest income will vary each reporting period depending on our average cash balances during the period, composition of our marketable security portfolio and the current level of interest rates.

 

Provision for Income Taxes

 

Provision for income taxes is comprised of federal, state, local and foreign taxes based on pre-tax income. Overall, our effective tax rate for 2021 and beyond may differ from historical effective tax rates due to increases in losses in foreign operations that are not eligible for tax benefits on account of valuation allowances, as well as any future tax law changes that may impact the effective tax rate.

 

 

Results of Operations

 

The following table summarizes our results of operations and the related changes for the periods indicated. The results below are not necessarily indicative of the results for future periods.

 


 

   

Year Ended

                   

Year Ended

                 
   

December 31,

   

Change

   

December 31,

   

Change

 

(dollars in thousands)

 

2021

   

2020

   

$

   

%

   

2020

   

2019

   

$

   

%

 
                                                                                                 

Revenue

  $ 488,098       100.0 %   $ 434,395       100.0 %   $ 53,703       12.4     $ 434,395       100.0 %   $ 458,728       100.0 %   $ (24,333 )     (5.3 )

Cost of revenue

    265,407       54.4       216,568       49.9       48,839       22.6       216,568       49.9       223,438       48.7       (6,870 )     (3.1 )

Gross profit

    222,691       45.6       217,827       50.1       4,864       2.2       217,827       50.1       235,290       51.3       (17,463 )     (7.4 )

Operating expenses:

                                                                                               

Marketing and sales

    82,175       16.8       69,309       16.0       12,866       18.6       69,309       16.0       72,976       15.9       (3,667 )     (5.0 )

Research and development

    44,241       9.1       36,940       8.5       7,301       19.8       36,940       8.5       32,692       7.1       4,248       13.0  

General and administrative

    68,436       14.0       51,742       11.9       16,694       32.3       51,742       11.9       49,766       10.9       1,976       4.0  

Changes in fair value of contingent consideration

    (12,503 )     (2.6 )     -       -       (12,503 )     *       -       -       -       -       -       -  

Total operating expenses

    182,349       37.3       157,991       36.4       24,358       15.4       157,991       36.4       155,434       33.9       2,557       1.6  

Income from operations

    40,342       8.3       59,836       13.8       (19,494 )     (32.6 )     59,836       13.8       79,856       17.4       (20,020 )     (25.1 )

Other income, net

    (158 )     -       3,109       0.7       (3,267 )     (105.1 )     3,109       0.7       1,337       0.3       1,772       132.5  

Income before income taxes

    40,184       8.2       62,945       14.5       (22,761 )     (36.2 )     62,945       14.5       81,193       17.7       (18,248 )     (22.5 )

Provision for income taxes

    6,812       1.4       12,078       2.8       (5,266 )     (43.6 )     12,078       2.8       17,538       3.8       (5,460 )     (31.1 )

Net income

  $ 33,372       6.8 %   $ 50,867       11.7 %   $ (17,495 )     (34.4 %)   $ 50,867       11.7 %   $ 63,655       13.9 %   $ (12,788 )     (20.1 %)

 


*Percentage change not meaningful

 

Stock-based compensation expense included in the statements of comprehensive income data above is as follows:

 


 

   

Year Ended December 31,

 

(dollars in thousands)

 

2021

   

2020

   

2019

 
                         

Stock options and grants

  $ 17,553     $ 13,327     $ 9,591  

Employee stock purchase plan

    1,542       1,346       1,190  

Total stock-based compensation expense

  $ 19,095     $ 14,673     $ 10,781  
                         

Cost of revenue

  $ 2,595     $ 2,451     $ 2,056  

Operating expenses:

                       

Marketing and sales

    3,736       3,121       2,632  

Research and development

    2,833       2,440       1,851  

General and administrative

    9,931       6,661       4,242  

Total stock-based compensation expense

  $ 19,095     $ 14,673     $ 10,781  

 


 

Comparison of Years Ended December 31, 2021 and 2020

 

Revenue

 

Revenue by reportable segment and the related changes for 2021 and 2020 is summarized as follows:


 

   

Year Ended December 31,

                 
   

2021

   

2020

   

Change

 

(dollars in thousands)

 

$

   

% of Total Revenue

   

$

   

% of Total Revenue

   

$

   

%

 
                                                 

Revenue

                                               

United States

  $ 384,458       78.8 %   $ 345,708       79.6 %   $ 38,750       11.2 %

Europe

    90,399       18.5       74,796       17.2       15,603       20.9  

Japan

    13,241       2.7       13,891       3.2       (650 )     (4.7 )

Total revenue

  $ 488,098       100.0 %   $ 434,395       100.0 %   $ 53,703       12.4 %

 

 

Our revenue increased $53.7 million, or 12.4%, for 2021 compared with 2020. Our revenue for 2021 includes revenue of $33.3 million provided by our acquisition of Hubs. By reportable segment, revenue in the United States increased $38.8 million, or 11.2%, for 2021 compared with 2020. Revenue in Europe increased $15.6 million, or 20.9%, for 2021 compared with 2020. Revenue in Japan decreased $0.7 million, or 4.7%, for 2021 compared with 2020. Excluding Hubs, revenue in the United States increased $21.1 million, or 6.1%, and revenue in Europe decreased $0.1 million, or 0.2%, for 2021 compared to the same period in 2020. International revenue was positively impacted by $3.3 million during 2021 compared to the same period in 2020 as a result of foreign currency movements, primarily the strengthening of the British Pound and Euro relative to the United States Dollar.

 

 

During 2021, we served 55,330 unique product developers and engineers, an increase of  26.3% over 2020. The increase in product developers served was driven primarily by our acquisition of Hubs. Excluding the impact of Hubs, our product developers served increased 5.2% over the same period in 2020. Our growth in product developers and engineers served increased at a greater rate than our revenue growth, resulting in a decrease in the average spend per product developer and engineer. The decrease in average spend per product developer and engineer was driven by a change in the mix of products with a lower average order size purchased during the year by product developers and engineers we serve.

 

Revenue by product line and the related changes for 2021 and 2020 is summarized as follows:

 


 

   

Year Ended December 31,

                 
   

2021

   

2020

   

Change

 

(dollars in thousands)

 

$

   

% of Total Revenue

   

$

   

% of Total Revenue

   

$

   

%

 
                                                 

Revenue

                                               

Injection Molding

  $ 226,117       46.3 %   $ 217,992       50.2 %   $ 8,125       3.7 %

CNC Machining

    166,811       34.2       131,587       30.3       35,224       26.8  

3D Printing

    72,721       14.9       62,502       14.4       10,219       16.3  

Sheet Metal

    20,397       4.2       18,838       4.3       1,559       8.3  

Other Revenue

    2,052       0.4       3,476       0.8       (1,424 )     (41.0 )

Total revenue

  $ 488,098       100.0 %   $ 434,395       100.0 %   $ 53,703       12.4 %

 


 

By product line, our revenue increase was driven by a 26.8% increase in CNC Machining revenue, a 16.3% increase in 3D Printing revenue, a 3.7% increase in Injection Molding revenue, and an 8.3% increase in Sheet Metal revenue, which was partially offset by a 41.0% decrease in Other Revenue, in each case for 2021 compared with 2020.

 

Cost of Revenue, Gross Profit and Gross Margin

 

Cost of Revenue. Cost of revenue increased $48.8 million, or 22.6%, for 2021 compared to 2020, which was greater than the rate of revenue increase of 12.4% for 2021 compared to 2020. The increase in cost of revenue was driven by a $28.2 million increase resulting from our acquisition of Hubs.  The $20.6 million increase in cost of revenue in our legacy business was driven by increased volumes and labor shortage resulting in wage inflation, increased overtime and increased recruiting costs, leading to personnel and related cost increases of $12.1 million and an increase in raw material and product costs of $9.6 million, which were partially offset by a decrease in equipment and facility related costs of $1.1 million.

 

Gross Profit and Gross Margin. Gross profit increased from $217.8 million in 2020 to $222.7 million in 2021. Gross margin decreased from 50.1% of revenue in 2020 to 45.6% of revenue in 2021 primarily due to labor and materials cost inflation and the mix of revenue.

 

Operating Expenses

 

Marketing and Sales. Marketing and sales expense increased $12.9 million, or 18.6%, for 2021 compared to 2020. In our legacy business, the increase was driven by personnel and related cost increases of $3.0 million and information technology allocation cost increases, including amortization of PL 2.0 software assets, of $4.4 million. In addition, our acquisition of Hubs provided $5.5 million in marketing and sales expense during 2021.

 

Research and Development. Our research and development expense increased $7.3 million, or 19.8%, for 2021 compared to 2020 primarily due to personnel and related cost increases of $4.2 million driven by personnel and contractor resources dedicated to the launch of our PL 2.0 system. During the development of PL 2.0, certain research and development personnel costs were capitalizable as a software development asset. Since the system was placed in service in November 2020, the continuing personnel costs have been expensed as incurred. In addition, increases of $3.2 million resulted from our acquisition of Hubs.

 

General and Administrative. Our general and administrative expense increased $16.7 million, or 32.3%, for 2021 compared to 2020 primarily due to an increase of $9.3 million resulting from our acquisition of Hubs, other professional service cost increases of $5.0 million, stock-based compensation cost increases of $0.9 million, and personnel and related cost increases of $1.6 million.

 

Changes in fair value of contingent consideration. The fair value of contingent consideration associated with the acquisition of Hubs decreased $12.5 million during 2021. We had no contingent consideration liabilities recorded during 2020.

 

 

Income from Operations

 

Income from operations decreased $19.5 million, or 32.6%, for 2021 compared with 2020. By reportable segment, income from operations for the United States and Europe decreased 0.8% and 93.8%, respectively, and loss from operations and expenses included in Corporate Unallocated and Japan increased 15.3% for 2021 compared with 2020. The decrease in income from operations is primarily driven by the acquisition of Hubs, increases in cost of revenue due to wage and material inflation and the additional costs of PL 2.0, including the amortization of the software asset.

 

Other (Expense) Income, Net and Provision for Income Taxes

 

Other (Expense) Income, Net. We recognized other expense, net of $0.2 million in 2021, a decrease of $3.3 million compared to other income, net of $3.1 million for 2020. Other expense, net for 2021 primarily consisted of a $0.9 million loss on foreign currency, which is partially offset by a $0.2 million in interest income and $0.5 million in other income. Other income, net for 2020 primarily consisted of $1.4 million in interest income on investments and a $1.5 million gain on foreign currency.

 

Provision for Income Taxes. Our income tax provision decreased by $5.3 million for 2021 compared to 2020. The decrease in the provision is primarily due to lower taxable income and the lower effective tax rate. Our effective tax rate of  17.0% for 2021 decreased 2.2% compared to 19.2% for the same period in 2020.

 

Comparison of Years Ended December 31, 2020 and 2019

 

For a comparison of our results of operations for fiscal years ended December 31, 2020 and December 31, 2019, see "Part II, Item 7 Management's Discussion and Analysis of Financial Condition and Results of Operations" of our Annual Report on Form 10-K for the fiscal year ended December 31, 2020, filed with the SEC on February 19, 2021.

 

 

Liquidity and Capital Resources

 

Cash Flows

 

The following table summarizes our cash flows for the years ended December 31, 2021, 2020 and 2019:

 


 

   

Year Ended December 31,

 

(dollars in thousands)

 

2021

   

2020

   

2019

 
                         

Net cash provided by operating activities

  $ 55,242     $ 106,969     $ 116,052  

Net cash used in investing activities

    (94,664 )     (95,473 )     (44,303 )

Net cash used in financing activities

    (22,198 )     (10,726 )     (31,617 )

Effect of exchange rates on cash and cash equivalents

    (54 )     1,608       47  

Net (decrease) increase in cash and cash equivalents

  $ (61,674 )   $ 2,378     $ 40,179  

 


 

Sources of Liquidity

 

We finance our operations and capital expenditures through cash flow from operations. We had cash and cash equivalents of $65.9 million as of December 31, 2021, a decrease of $61.7 million from December 31, 2020. The decrease in our cash was primarily due to cash used in investing activities for our acquisition of Hubs of $127.4 million, purchases of property, equipment and other capital assets of $34.2 million, and cash used in financing activities for repurchases of common stock of $23.3 million, which were partially offset by net proceeds from investments in marketable securities of $67.0 million and cash generated through operations of $55.2 million. We had cash and cash equivalents of $127.6 million as of December 31, 2020, an increase of $2.4 million from December 31, 2019. The increase in our cash was due primarily to cash generated through operations, partially offset by investing activity and repurchases of common stock. We had cash and cash equivalents of $125.2 million as of December 31, 2019, an increase of $40.2 million from December 31, 2018. The increase in our cash was due primarily to cash generated through operations.

 

As of December 31, 2021, the amount of cash and cash equivalents held by foreign subsidiaries was $20.6 million. Our intent is to continue to permanently reinvest these funds outside the U.S. and our current plans do not demonstrate a need to repatriate them to fund our domestic operations. We believe that our existing cash and cash equivalents together with cash generated from operations will be sufficient to meet our working capital expenditure requirements for at least the next 12 months.

 

Cash Flows from Operating Activities

 

Cash flow from operating activities of $55.2 million during 2021 primarily consisted of net income of $33.4 million, adjusted for certain non-cash items, including depreciation and amortization of $40.5 million and stock-based compensation expense of $19.1 million, which were partially offset by a decrease in the fair value of contingent consideration of $13.3 million and changes in operating assets and liabilities and other items totaling $24.5 million. The cash flow from operating activities during 2021 compared to 2020 decreased $51.7 million primarily due to decreases in net income of $17.5 million, increases in accounts receivable of $20.1 million driven by timing of cash receipts, a decrease in the fair value of contingent consideration of $13.3 million, decreases in deferred taxes of $7.2 million, and decreases of $6.0 million in other items, which were partially offset by increases in depreciation and amortization of $7.9 million and increases in stock-based compensation of $4.4 million.

 

Cash flow from operating activities of $107.0 million during 2020 primarily consisted of net income of $50.9 million, adjusted for certain non-cash items, including depreciation and amortization of $32.6 million, stock-based compensation expense of $14.7 million and deferred taxes of $7.6 million and changes in operating assets and liabilities and other items totaling $1.3 million. The cash flow from operating activities during 2020 compared to 2019 decreased $9.1 million due to decreases in net income of $12.8 million and changes in operating assets and liabilities and other items of $3.8 million, which were partially offset by increases in stock-based compensation expenses of $3.9 million, increases in deferred taxes of $1.5 million, increases in depreciation and amortization of $1.7 million driven by an increase in capital investments and increases in amortization of held-to-maturity securities of $0.4 million.

 

 

Cash Flows from Investing Activities

 

Cash used in investing activities was $94.7 million for the year ended December 31, 2021, consisting of $127.4 million in cash used for acquisitions, net of cash acquired and $34.2 million for the purchases of property, equipment and other capital assets, which were partially offset by $67.0 million of net proceeds from investments in marketable securities.

 

Cash used in investing activities was $95.5 million for the year ended December 31, 2020, consisting of $47.0 million for the purchase of property, equipment and other capital assets, $113.2 million for the purchase of marketable securities and $3.0 in other investing activities, which were partially offset by $67.7 million in proceeds from maturities of marketable securities.

 

Cash Flows from Financing Activities

 

Cash used in financing activities was $22.2 million for the year ended December 31, 2021, consisting of $23.3 million in repurchases of common stock, $4.2 million in shares withheld for tax obligations associated with equity transactions, and $0.6 million for repayments of finance lease obligations, which were partially offset by $5.9 million in proceeds from the exercise of stock options.

 

Cash used in financing activities was $10.7 million for the year ended December 31, 2020, consisting of $14.7 million in repurchases of common stock, $3.4 million in purchases of shares withheld for tax obligations associated with equity transactions and $0.2 million in principal repayments of finance lease obligations, partially offset by $7.6 million in proceeds from exercises of stock options.

 

Operating and Capital Expenditure Requirements

 

We believe, based on our current operating plan, that our cash balances and cash generated through operations and interest income will be sufficient to meet our anticipated cash requirements through at least the next 12 months. From time to time we may seek to sell equity or convertible debt securities or enter into credit facilities. The sale of equity and convertible debt securities may result in dilution to our shareholders. If we raise additional funds through the issuance of convertible debt securities or enter into credit facilities, these securities and debt holders could have rights senior to those of our common stock, and this debt could contain covenants that would restrict our operations. We may require additional capital beyond our currently forecasted amounts. Any such required additional capital may not be available on terms acceptable to us, or at all.

 

Our future capital requirements will depend on many factors, including the following:

 

 

the revenue growth in Injection Molding, CNC Machining, 3D Printing and Sheet Metal product lines;

 

 

 

 

costs of operations, including costs relating to expansion and growth;

 

 

 

 

the emergence of competing or complementary technological developments;

 

 

 

 

the costs of filing, prosecuting, defending and enforcing any patent claims and other intellectual product rights, or participating in litigation-related activities; and

 

 

 

 

the acquisition of businesses, products and technologies, although we currently have no commitments or agreements relating to any of these types of transactions.

 

Our recent annual capital expenditures have varied between 7% and 20% of annual revenue. We believe future growth capital expenditures, excluding any expenditures for buildings and maintenance capital we might purchase for our operations, are likely to vary between approximately 8% and 12% of annual revenue.

 

 

Contractual Obligations

 

As of December 31, 2021, our contractual obligations are $7.4 million related to current and long-term operating and finance lease liabilities.

 

Financing Arrangements

  

We had no financing arrangements as of December 31, 2021 and 2020.

 

Inflation

 

We experience normal inflation and changing prices, primarily on our production materials and labor. In 2021 and 2020, wage inflation contributed to our lower gross margin. We do not believe inflation and changing prices had a material effect on our financial condition in 2019. 

 

Off-Balance Sheet Arrangements

 

Since our inception, we have not engaged in any off-balance sheet arrangements, including the use of structured finance, special purpose entities or variable interest entities.

 

Critical Accounting Policies and Use of Estimates

 

The discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates, judgments and assumptions that affect the reported amount of assets, liabilities, revenue, expenses and related disclosures. On an ongoing basis, we evaluate our estimates, including those related to revenue recognition, goodwill, capitalized software costs, other intangible assets, stock-based compensation, and income taxes. We base our estimates of the carrying value of certain assets and liabilities on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. In many cases, we could reasonably have used different accounting policies and estimates. In some cases, changes in the accounting estimates are reasonably likely to occur from period to period. Management has discussed the development, selection and disclosure of these estimates with the audit committee of our board of directors. Our actual results may differ significantly from these estimates under different assumptions or conditions.

 

We believe the following critical accounting policies affect our more significant judgments used in the preparation of our consolidated financial statements. See the Notes to Consolidated Financial Statements included in Item 8. “Financial Statements and Supplementary Data” in this Annual Report on Form 10-K for additional information about these critical accounting policies, as well as a description of our other accounting policies.

 

 

Revenue Recognition

 

We recognize revenue for our internal and outsourced manufacturing operations in accordance with ASC 606, Revenue from Contracts with Customers. We manufacture custom parts to specific customer orders that have no alternative use to us, and we believe there is a legally enforceable right to payment for performance completed to date on internally and outsourced manufactured parts. For manufactured parts that meet these two criteria, we will recognize revenue over time. Revenue is recognized over time using the input method based on time in production as a percentage of total estimated production time to measure progress toward satisfying performance obligations using the estimated total time necessary to complete the parts per the customer's order and an estimate of inventory and production costs incurred to date. The input method requires an analysis of the incurred time in production and an estimate of the total time necessary to complete the total parts per the customer's order. The majority of our CNC machining, 3D printing, and sheet metal contracts have a single performance obligation. The majority of our injection molding contracts have multiple performance obligations including one obligation to produce the mold and a second obligation to produce parts. For injection molding contracts with multiple performance obligations, we allocate revenue to each performance obligation based on its relative standalone selling price. We generally determine standalone selling price based on the price charged to customers.

 

Goodwill

 

We recognize goodwill in accordance with ASC 350, Intangibles—Goodwill and Other. Goodwill is the excess of cost of an acquired entity over the amounts assigned to assets acquired and liabilities assumed in a business combination. Goodwill is allocated to our reporting units, which are determined by the discrete financial information available for the component and whether it is regularly reviewed by segment management. Our reporting units are the United States, Europe and Japan. Goodwill is not amortized.

 

Goodwill is tested for impairment annually at the beginning of the fourth quarter, and is tested for impairment between annual tests if an event occurs or circumstances change that would indicate the carrying amount may be impaired. An impairment charge for goodwill is recognized only when the estimated fair value of a reporting unit, including goodwill, is less than its carrying amount. In 2021, we performed a quantitative analysis based on the performance of Europe in 2021 and the amount of goodwill recorded during the year from the Hubs acquisition. The quantitative impairment test requires judgment, including the identification of reporting units, the assignment of assets, liabilities and goodwill to reporting units, and the determination of fair value of each reporting unit. The impairment test requires the comparison of the fair value of each reporting unit with its carrying amount, including goodwill. In performing the impairment test, we determined the fair value of its reporting units through a combination of  the income approach by using discounted cash flow (DCF) analyses and the market approach through the guideline company method. Determining fair value requires us to make judgments about appropriate discount rates, perpetual growth rates and the amount and timing of expected future cash flows. The cash flows employed in the DCF analysis for each reporting unit are based on the reporting unit's budget, long-term business plan and recent operating performance. Discount rate assumptions are based on an assessment of the risk inherent in the future cash flows of the respective reporting unit and market conditions. Given the inherent uncertainty in determining the assumptions underlying a DCF analysis, actual results may differ from those used in our valuations. In assessing the reasonableness of the determined fair values, we also reconciled the aggregate determined fair value of the Company to the Company's market capitalization, which, at the date of its 2021 impairment test, included a 16 percent control discount. Significant assumptions used in the DCF analysis included long-term revenue growth rates. As a result of the analyses, no impairment was identified.

 

Capitalized Software Costs

 

We follow ASC 350-40, Intangibles – Goodwill and Other, Internal-Use Software, in accounting for internally developed software. Costs for internal-use software are evaluated by projected and capitalized where appropriate.

 

Other Intangible Assets

 

We recognize other intangibles assets in accordance with ASC 350, Intangibles—Goodwill and Other. Other intangible assets include software technology, customer relationships and other intangible assets acquired from independent parties. We used a multi-period excess earnings method under the income approach to measure the software platform. The significant assumptions used to estimate the value of the software platform included forecasted annual revenue growth, gross margin rates, operating expenses as a percentage of sales and the weighted-average cost of capital, which are affected by our business plans and expectations about future market or economic conditions. Other intangible assets with a definite life are amortized over a period ranging from two to 12 years on a straight line basis, and are tested for impairment whenever events or circumstances indicate that the carrying amount of an asset (asset group) may not be recoverable. An impairment loss is recognized when the carrying amount of an asset exceeds the estimated undiscounted cash flows generated by the asset. As of December 31, 2021 no impairment charges for intangible assets have been recognized.

 

Stock-Based Compensation

 

We determine our stock-based compensation in accordance with ASC 718, Compensation—Stock Compensation (ASC 718), which requires the measurement and recognition of compensation expense for all share-based payment awards made to employees and non-employee directors based on the grant date fair value of the award.

 

Determining the appropriate fair value model and calculating the fair value of stock option grants requires the input of subjective assumptions. We use the Black-Scholes option pricing model to value our stock option awards. Stock-based compensation expense is significant to our consolidated financial statements and is calculated using our best estimates, which involve inherent uncertainties and the application of management’s judgment. Significant estimates include our expected term and stock price volatility. If different estimates and assumptions had been used, our common stock valuations could be significantly different and related stock-based compensation expense may be materially impacted.

 

The Black-Scholes option pricing model requires inputs such as the risk-free interest rate, expected term, expected volatility and expected dividend yield. We base the risk-free interest rate that we use in the Black-Scholes option pricing model on zero coupon U.S. Treasury instruments with maturities similar to the expected term of the award being valued. The expected term of stock options is estimated from the vesting period of the award and represents the weighted average period that our stock options are expected to be outstanding. We estimated the volatility of our stock price based on the historic volatility of our common stock. We have never paid and do not anticipate paying any cash dividends in the foreseeable future and, therefore, we use an expected dividend yield of zero in the option pricing model. We account for forfeitures as they occur.

 

 

The fair value of each new employee option awarded was estimated on the date of grant for the periods below using the Black-Scholes option pricing model with the following assumptions:

 


 

   

Year Ended December 31,

 
   

2021

   

2020

   

2019

 
                         

Risk-free interest rate

    0.80 - 1.12%       0.50 - 1.47%       2.35 - 2.58%  

Expected life (years)

    6.25       6.25       6.25  

Expected volatility

    45.28 - 45.53%       42.40 - 43.83%       42.52 - 42.74%  

Expected dividend yield

    0%       0%       0%  

Weighted average grant date fair value

    $128.14       $45.32       $47.84  

 


 

Our 2012 Employee Stock Purchase Plan (ESPP) allows eligible employees to purchase a variable number of shares of our common stock during each offering period at a discount through payroll deductions of up to 15% of their eligible compensation, subject to plan limitations. The ESPP provides for six-month offering periods with a single purchase period. At the end of each offering period, employees are able to purchase shares at 85% of the lower of the fair market value of our common stock on the first trading day of the offering period or on the last trading day of the offering period. We determine the fair value stock-based compensation related to our ESPP in accordance with ASC 718 using the component measurement approach and the Black-Scholes standard option pricing model.

 

The fair value of each offering period was estimated using the Black-Scholes option pricing model with the following assumptions:

 


 

   

Year Ended December 31,

 
   

2021

   

2020

   

2019

 
                         

Risk-free interest rate

    0.06 - 0.17%       0.12 - 0.17%       1.59 - 2.35%  

Expected life (months)

    6.00       6.00       6.00  

Expected volatility

    53.44 - 65.53%       50.85 - 59.99%       42.63 - 53.57%  

Expected dividend yield

    0%       0%       0%  

 


 

 There are significant differences among option valuation models, and this may result in a lack of comparability with other companies that use different models, methods and assumptions. If factors change and we employ different assumptions in the application of ASC 718 in future periods, or if we decide to use a different valuation model, such as a lattice model, the stock-based compensation expense that we record in the future under ASC 718 may differ significantly from what we have recorded using the Black-Scholes option pricing model and could materially affect our operating results.

 

We recognize stock-based compensation expense on a straight-line basis over the requisite service period. We recorded stock-based compensation expense relating to stock options, restricted stock awards, performance stock units and our ESPP of $19.1 million, $14.7 million and $10.8 million during the years ended December 31, 2021, 2020 and 2019, respectively. As of December 31, 2021, we had $4.3 million of unrecognized stock-based compensation costs related to unvested stock options that are expected to be recognized over a weighted average period of 2.6 years. We issued options to purchase 57,901, 60,065 and 53,708 shares of our common stock in 2021, 2020 and 2019, respectively. As of December 31, 2021, we had $26.0 million of unrecognized stock-based compensation costs related to non-vested restricted stock, which is expected to be recognized over a weighted average period of 2.4 years. We issued restricted stock awards of 205,996, 108,179 and 115,471 shares of our common stock in 2021, 2020 and 2019, respectively. As of December 31, 2021, we had $0.8 million of unrecognized stock-based compensation costs related to non-vested performance stock, which is expected to be recognized over a weighted average period of 1.8 years. We issued performance stock awards of 15,078, 19,956 and 21,434 shares of our common stock in 2021, 2020 and 2019, respectively.

 

In future periods, our stock-based compensation expense is expected to increase due to our existing unrecognized stock-based compensation and the issuance of additional stock-based awards to continue to attract and retain employees and non-employee directors.

 

Income Taxes

 

We account for income taxes in accordance with ASC 740, Income Taxes (ASC 740). Under this method, we determine tax assets and liabilities based upon the differences between the financial statement carrying amounts and the tax basis of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to affect taxable income. The tax consequences of most events recognized in the current year’s financial statements are included in determining income taxes currently payable. However, because tax laws and financial accounting standards differ in their recognition and measurement of assets, liabilities and equity, revenues, expenses, gains and losses, differences arise between the amount of taxable income and pretax financial income for a year and between the tax basis of assets or liabilities and their reported amounts in the financial statements. Because we assume that the reported amounts of assets and liabilities will be recovered and settled, respectively, a difference between the tax basis of an asset or liability and its reported amount in the balance sheet will result in a taxable or a deductible amount in some future years when the related liabilities are settled or the reported amounts of the assets are recovered, giving rise to a deferred tax asset or liability. We establish a valuation allowance for any portion of our deferred tax assets that we believe will not be recognized.

 

 

ASC 740 also clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements by defining a criterion that an individual tax position must meet for any part of the benefit of that position to be recognized in an enterprise’s financial statements. The Company recognizes the effect of income tax positions only if sustaining those positions is more likely than not. The Company records penalties and interest related to unrecognized tax benefits in income taxes in the Company’s Consolidated Statements of Income. Including interest and penalties, we have established a liability for uncertain tax positions of $5.7 million as of December 31, 2021.

 

The effective tax rate decreased by 2.2% for the year ended December 31, 2021 when compared to 2020 primarily due to a one-time benefit from the revaluation of contingent consideration and a benefit from the decrease in the tax liability for uncertain tax positions resulting from the expiration of the statute of limitations. These benefits were partially offset by an increase in the valuation allowances on losses from foreign operations. 

 

Recently adopted accounting pronouncements

 

In December 2019, the Financial Accounting Standards Board issued Accounting Standards Update (ASU) 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes (ASU 2019-12). ASU 2019-12 attempts to simplify aspects of accounting for franchise taxes and enacted changes in tax laws or rates, and clarifies the accounting for transactions that result in a step-up in the tax basis of goodwill. ASU 2019-12 is effective for public business entities for fiscal years beginning after December 15, 2020, including interim periods within that fiscal year. The Company adopted ASU 2019-12 on January 1, 2021 and there was no material impact on the Company’s consolidated financial statements.

 

 

 

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

 

Quantitative and Qualitative Disclosure of Market Risks

 

Our exposure to market risk is confined to our cash and cash equivalent balances and investments. The primary goals of our investment policy are preservation of capital, fulfillment of liquidity needs and fiduciary control of cash and cash equivalent balances. We also seek to maximize income from our investments without assuming significant risk. To achieve our goals, we maintain a portfolio of debt securities with various maturities ranging from one to three years. Due to the nature of our investment portfolio, we are subject to interest rate risks, which we mitigate by holding our investments to maturity. In future periods, we will continue to evaluate our investment policy in order to continue our overall goals.

 

Foreign Currency Risk

 

As a result of our foreign operations, we have revenue, expenses, assets and liabilities that are denominated in foreign currencies. We generate revenue and incur production costs and operating expenses in British Pound, Euro and Japanese Yen.

 

Our operating results and cash flows are adversely impacted when the United States dollar appreciates relative to other foreign currencies. Additionally, our operating results and cash flows are adversely impacted when the British Pound appreciates relative to the Euro. As we expand internationally, our results of operations and cash flows will become increasingly subject to changes in foreign currency exchange rates.

 

We have not used forward contracts or currency borrowings to hedge our exposure to foreign currency risk. Foreign currency risk can be assessed by estimating the change in results of operations or financial position resulting from a hypothetical 10% adverse change in foreign exchange rates. We believe such a change would generally not have a material impact on our financial position, but could have a material impact on our results of operations. We recognized foreign currency losses of $0.9 million for the year ended December 31, 2021 and foreign currency gains of $1.5 million for the year ended December 31, 2020.

 

 

Item 8. Financial Statements and Supplementary Data

 

Proto Labs, Inc.

Index to Consolidated Financial Statements

 

       

Page

Report of Independent Registered Public Accounting Firm on Consolidated Financial Statements

 

50

Report of Independent Registered Public Accounting Firm (PCAOB ID: 42)

 

52

Consolidated Balance Sheets at December 31, 2021 and 2020

 

53

Consolidated Statements of Comprehensive Income for the years ended December 31, 2021, 2020 and 2019

 

54

Consolidated Statements of Shareholders' Equity for the years ended December 31, 2021, 2020 and 2019

 

55

Consolidated Statements of Cash Flows for the years ended December 31, 2021, 2020 and 2019

 

56

Notes to Consolidated Financial Statements

 

57

 

 

Report of Independent Registered Public Accounting Firm

 

To the Shareholders and the Board of Directors of Proto Labs, Inc.

 

Opinion on the Financial Statements

 

We have audited the accompanying consolidated balance sheets of Proto Labs, Inc. (the Company) as of December 31, 2021 and 2020, the related consolidated statements of comprehensive income, shareholders' equity and cash flows for each of the three years in the period ended December 31, 2021, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021, in conformity with U.S. generally accepted accounting principles.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), and our report dated February 18, 2022 expressed an unqualified opinion thereon.

 

Basis for Opinion

 

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

Critical Audit Matter

 

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

 

 

 

   

Revenue Recognition – Revenue Recognized Over Time

 

Description of the Matter  

 

As discussed in Notes 2 and 3 to the consolidated financial statements, the Company provides quality, quick-turn prototyping and on-demand manufacturing services.  The majority of revenue recognized in a reporting period is based on completed, invoiced contracts.  The Company manufactures custom parts to specific customer orders that have no alternative use to the Company, and the Company believes that there is a legally enforceable right to payment for performance completed to date on these manufactured parts.  Revenue is recognized over time for manufactured parts which meet these two criteria.  For revenue recognized over time, management uses the input method based on time in production as a percentage of total estimated production time to measure progress toward satisfying performance obligations using the estimated total time necessary to complete the parts per the customer's order and an estimate of inventory and production costs incurred to date.

 

Auditing revenue recognized over time was challenging because the relevant accounting standard requires the Company to estimate the progress towards satisfaction of performance obligations, applying a single appropriate method to measure progress. The input method requires an analysis of the incurred time in production and an estimate of the total time necessary to complete the total parts per the customer’s order. The Company also estimates inventory and production costs incurred to date. These estimates are based on management’s assessment of the current status of production as well as historical results.

     

How We Addressed the Matter in Our Audit

 

We obtained an understanding, evaluated the design and tested the operating effectiveness of controls over the Company’s process for recognizing revenue over time. This included testing controls over management’s evaluation of contract terms, the estimation of production time incurred to date and total production time used in the input method, estimation of a reasonable profit margin and the completeness and accuracy of the data used in the input method.   

To test the Company’s revenue recognition over time, we performed audit procedures that included, among others, inspecting a sample of contracts to evaluate the existence of an enforceable right to payment for performance completed to-date, evaluating the progress towards completion of orders in process through examination of a sample of product shipments subsequent to the end of the reporting period, evaluating the reasonableness of management’s estimate of profit margins based on a comparison to historical margins, testing the appropriateness of the timing and amount of revenue recognized over time based on the underlying inputs, and performing an independent sensitivity analysis to evaluate the impact on revenues of changes in significant assumptions.

 

 

/s/ Ernst & Young LLP

 

We have served as the Company’s auditor since 2011.

 

Minneapolis, Minnesota

February 18, 2022

 

 

Report of Independent Registered Public Accounting Firm

 

To the Shareholders and the Board of Directors of Proto Labs, Inc.

 

Opinion on Internal Control over Financial Reporting 

 

We have audited Proto Labs, Inc.’s internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). In our opinion, Proto Labs, Inc. (the Company) maintained, in all material respects, effective internal control over financial reporting as of December 31, 2021, based on the COSO criteria.

 

As indicated in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting, management’s assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of 3D Hubs, Inc. (Hubs), which is included in the 2021 consolidated financial statements of the Company and constituted 4% of total assets as of December 31, 2021 and 7% of revenues for the year then ended. Our audit of internal control over financial reporting of the Company also did not include an evaluation of the internal control over financial reporting of Hubs.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of Proto Labs, Inc. as of December 31, 2021 and 2020, the related consolidated statements of comprehensive income, shareholders' equity and cash flows for each of the three years in the period ended December 31, 2021, and the related notes and our report dated February 18, 2022 expressed an unqualified opinion thereon.

 

Basis for Opinion

 

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.

 

Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

Definition and Limitations of Internal Control Over Financial Reporting

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

/s/ Ernst & Young LLP

 

Minneapolis, Minnesota

February 18, 2022

 

 

 

Proto Labs, Inc.

Consolidated Balance Sheets

(In thousands, except share and per share amounts)

 

 

  

December 31,

 
  

2021

  

2020

 
         

Assets

        

Current assets

        

Cash and cash equivalents

 $65,929  $127,603 

Short-term marketable securities

  11,580   34,088 

Accounts receivable, net of allowance for doubtful accounts of $1,948 and $1,781 as of December 31, 2021 and December 31, 2020, respectively

  80,051   57,877 

Inventory

  13,161   10,862 

Prepaid expenses and other current assets

  11,450   11,032 

Income taxes receivable

  1,321   540 

Total current assets

  183,492   242,002 

Property and equipment, net

  280,346   282,666 

Goodwill

  400,610   128,752 

Other intangible assets, net

  37,998   14,350 

Long-term marketable securities

  14,340   59,357 

Operating lease assets

  5,578   9,855 

Finance lease assets

  1,898   2,396 

Other long-term assets

  4,320   4,826 

Total assets

 $928,582  $744,204 
         

Liabilities and shareholders' equity

        

Current liabilities

        

Accounts payable

 $25,364  $18,248 

Accrued compensation

  13,704   11,989 

Accrued liabilities and other

  11,980   16,193 

Current operating lease liabilities

  3,298   3,272 

Current finance lease liabilities

  550   552 

Total current liabilities

  54,896   50,254 

Long-term operating lease liabilities

  2,245   7,586 

Long-term finance lease liabilities

  1,351   1,919 

Long-term deferred tax liabilities

  35,892   33,854 

Other long-term liabilities

  5,705   6,235 

Total liabilities

  100,089   99,848 
         

Shareholders' equity

        

Preferred stock, $0.001 par value, authorized 10,000,000 shares; issued and outstanding 0 shares as of December 31, 2021 and December 31, 2020, respectively

  -   - 

Common stock, $0.001 par value, authorized 150,000,000 shares; issued and outstanding 27,465,945 and 26,776,796 shares as of December 31, 2021 and December 31, 2020, respectively

  28   27 

Additional paid-in capital

  468,548   284,848 

Retained earnings

  376,734   362,901 

Accumulated other comprehensive loss

  (16,817)  (3,420)

Total shareholders' equity

  828,493   644,356 

Total liabilities and shareholders' equity

 $928,582  $744,204 

 


 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

Proto Labs, Inc.

Consolidated Statements of Comprehensive Income

(In thousands, except share and per share amounts)

 

 

   

Year Ended December 31,

 
   

2021

   

2020

   

2019

 
                         

Statements of Operations:

                       

Revenue

  $ 488,098     $ 434,395     $ 458,728  

Cost of revenue

    265,407       216,568       223,438  

Gross profit

    222,691       217,827       235,290  

Operating expenses

                       

Marketing and sales

    82,175       69,309       72,976  

Research and development

    44,241       36,940       32,692  

General and administrative

    55,933       51,742       49,766  

Total operating expenses

    182,349       157,991       155,434  

Income from operations

    40,342       59,836       79,856  

Other (expense) income, net

    (158 )     3,109       1,337  

Income before income taxes

    40,184       62,945       81,193  

Provision for income taxes

    6,812       12,078       17,538  

Net income

  $ 33,372     $ 50,867     $ 63,655  
                         

Net income per share:

                       

Basic

  $ 1.21     $ 1.90     $ 2.37  

Diluted

  $ 1.21     $ 1.89     $ 2.35  
                         

Shares used to compute net income per share:

                       

Basic

    27,617,627       26,737,425       26,866,985  

Diluted

    27,653,099       26,896,357       27,049,423  
                         

Other Comprehensive Income (Loss), net of tax

                       

Foreign currency translation adjustments

  $ (13,278 )   $ 3,598     $ 1,474  

Net unrealized gains (losses) on investments in securities

    (119 )     -       -  

Comprehensive income

  $ 19,975     $ 54,465     $ 65,129  

 


 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

Proto Labs, Inc.

Consolidated Statements of Shareholders' Equity

(In thousands, except share amounts)

 

 

   

Common Stock

   

Additional

           

Accumulated Other

         
                   

Paid-In

   

Retained

   

Comprehensive

         
   

Shares

   

Amount

   

Capital

   

Earnings

   

Loss

   

Total

 
                                                 

Balance at January 1, 2019

    26,984,747       27       258,502       291,460       (8,492 )     541,497  

Common shares issued on exercise of options and other, net of shares withheld for tax obligations

    128,174       -       1,904       -       -       1,904  

Stock-based compensation expense

    -       -       10,781       -       -       10,781  

Repurchases of Common Stock

    (326,462 )     -       (3,128 )     (30,393 )     -       (33,521 )

Net income

    -       -       -       63,655       -       63,655  

Other comprehensive income

                                               

Foreign currency translation adjustment

    -       -       -       -       1,474       1,474  

Comprehensive income

                                            65,129  

Balance at December 31, 2019

    26,786,459     $ 27     $ 268,059     $ 324,722     $ (7,018 )   $ 585,790  

Common shares issued on exercise of options and other, net of shares withheld for tax obligations

    189,951       -       4,114       -       -       4,114  

Stock-based compensation expense

    -       -       14,673       -       -       14,673  

Repurchases of Common Stock

    (199,614 )     -       (1,998 )     (12,688 )     -       (14,686 )

Net income

                            50,867               50,867  

Other comprehensive income

                                               

Foreign currency translation adjustment

    -       -       -       -       3,598       3,598  

Comprehensive income

                                    54,465  

Balance at December 31, 2020

    26,776,796     $ 27     $ 284,848     $ 362,901     $ (3,420 )   $ 644,356  

Common shares issued on exercise of options and other, net of shares withheld for tax obligations

    176,736       -       1,637       -       -       1,637  

Common shares issued for Hubs acquisition

    863,995       1       166,708       -       -       166,709  

Stock-based compensation expense

    -       -       19,095       -       -       19,095  

Repurchases of Common Stock

    (351,582 )     -       (3,740 )     (19,539 )     -       (23,279 )

Net income

    -       -       -       33,372       -       33,372  

Other comprehensive income

                                               

Foreign currency translation adjustment

    -       -       -       -       (13,278 )     (13,278 )

Net unrealized gains (losses) on investments in securities

    -       -       -       -       (119 )     (119 )

Comprehensive income

                                    19,975  

Balance at December 31, 2021

    27,465,945     $ 28     $ 468,548     $ 376,734     $ (16,817 )   $ 828,493  

 


 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

Proto Labs, Inc.

Consolidated Statements of Cash Flows

(In thousands)

 


 

   

Year Ended December 31,

 
   

2021

   

2020

   

2019

 
                         

Operating activities

                       

Net income

  $ 33,372     $ 50,867     $ 63,655  

Adjustments to reconcile net income to net cash provided by operating activities:

                       

Depreciation and amortization

    40,488       32,594       30,864  

Stock-based compensation expense

    19,095       14,673       10,781  

Deferred taxes

    339       7,577       6,106  

Amortization of marketable securities

    -       415       5  

Realized loss on available-sale-securities

    567       -       -  

Changes in fair value of contingent consideration

    (13,253 )     -       -  

Other

    275       (336 )     391  

Changes in operating assets and liabilities, net of acquisitions:

                       

Accounts receivable

    (20,112 )     (91 )     1,848  

Inventories

    (2,390 )     (662 )     60  

Prepaid expenses and other

    64       (1,680 )     545  

Income taxes

    (774 )     (1,960 )     6,555  

Accounts payable

    4,654       1,492       (719 )

Accrued liabilities and other

    (7,083 )     4,080       (4,039 )

Net cash provided by operating activities

    55,242       106,969       116,052  
                         

Investing activities

                       

Purchases of property, equipment and other capital assets

    (34,209 )     (47,010 )     (62,230 )

Cash used for acquisitions, net of cash acquired

    (127,413 )     -       -  

Purchases of other assets and investments

    -       (3,000 )     (4,000 )

Purchases of marketable securities

    (16,159 )     (113,200 )     (46,403 )

Proceeds from sales of marketable securities

    64,913       -       -  

Proceeds from maturities of marketable securities

    18,204       67,737       68,330  

Net cash used in investing activities

    (94,664 )     (95,473 )     (44,303 )
                         

Financing activities

                       

Proceeds from exercises of stock options

    5,862       7,557       4,391  

Purchases of shares withheld for tax obligations

    (4,225 )     (3,443 )     (2,487 )

Repurchases of common stock

    (23,279 )     (14,686 )     (33,521 )

Principal repayments of finance lease obligations

    (552 )     (154 )     -  

Other

    (4 )     -       -  

Net cash used in financing activities

    (22,198 )     (10,726 )     (31,617 )

Effect of exchange rate changes on cash and cash equivalents

    (54 )     1,608       47  

Net (decrease) increase in cash and cash equivalents

    (61,674 )     2,378       40,179  

Cash and cash equivalents, beginning of period

    127,603       125,225       85,046  

Cash and cash equivalents, end of period

  $ 65,929     $ 127,603     $ 125,225  
                         

Supplemental cash flow disclosure

                       

Cash paid for interest

  $ 28     $ 23     $ 14  

Cash paid for taxes

  $ 7,583     $ 5,650     $ 4,002  

 



The accompanying notes are an integral part of these consolidated financial statements.

 

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

Note 1 — Nature of Business

 

Organization and business

 

Proto Labs, Inc. and its subsidiaries (Proto Labs, the Company, we, us, or our) is a digital manufacturer of custom prototypes and on-demand production parts. The Company utilizes injection molding, computer numerical control (CNC) machining, 3D printing and sheet metal fabrication to manufacture custom parts for its customers. The Company's customers conduct nearly all of their business over the internet. The Company targets its products to the millions of product developers and engineers who use three-dimensional computer-aided design (3D CAD) software to design products across a diverse range of end-markets. In addition, the Company serves procurement and supply chain professionals seeking to manufacture custom parts on-demand. The Company has established operations in the United States, Europe and Japan, which the Company believes are among the largest geographic markets where these product developers and engineers are located. Through the acquisition of Hubs in 2021, the Company is able to provide its customers access to a global network of premium manufacturing partners who reside across North America, Europe and Asia, complementing its in-house manufacturing. Proto Labs, Inc. is headquartered in Maple Plain, Minnesota. The Company’s subsidiaries are:

 


  

 

Name

   

Location

         
 

PL-US International LLC

   

United States

 

Hubs Manufacturing Inc.

     

United States

 
 

3D Hubs Manufacturing LLC

     

United States

 
 

Proto Labs Ltd.

   

United Kingdom

 

PL International Holdings, UK, Ltd.

   

United Kingdom

 

PL Euro Services Limited

   

United Kingdom

 

Proto Labs GmbH

   

Germany

 

Proto Labs Tooling GmbH

   

Germany

 

3D Hubs B.V.

     

Netherlands

 
 

Proto Labs, G.K.

   

Japan

 


 

 

 

Note 2 — Summary of Significant Accounting Policies

 

Principles of consolidation

 

The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries, as listed within “Organization and business” above. All intercompany accounts and transactions have been eliminated in consolidation.

 

Comprehensive income

 

Components of comprehensive income include net income, foreign currency translation adjustments and net unrealized gains and losses on investments in securities. Comprehensive income is disclosed in the accompanying Consolidated Statements of Comprehensive Income and Consolidated Statements of Shareholders’ Equity.

 

57

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

Accounting estimates

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (U.S. GAAP) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and related disclosures at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

 

Cash and cash equivalents

 

Cash and cash equivalents include cash and other investments, including marketable securities, with maturities of three months or less at the date of purchase. The Company maintains its cash in bank deposit accounts, which, at times, may exceed federally insured limits. The Company has not experienced any losses on such accounts.

 

Marketable securities

 

As of December 31, 2021, marketable securities are categorized as available-for-sale and are recorded at fair value.  In the first quarter of 2021, the Company sold held-to-maturity securities in order to partially fund the acquisition of Hubs. As a result of the sale, all remaining marketable securities were reclassified to available-for-sale securities and reported at fair value. Management determines the appropriate classification of debt securities at the time of purchase and reevaluates such designation as of each balance sheet date. The classification of marketable securities as current or non-current is dependent upon the security’s maturity date. Securities with maturities of three months or less at the time of purchase are categorized as cash equivalents as described above.

 

As of December 31, 2020, marketable securities included held-to-maturity debt securities recorded at amortized cost. Debt securities were classified as held-to-maturity when the Company had the positive intent and ability to hold the securities to maturity. Held-to-maturity securities were stated at amortized cost, adjusted for amortization of premiums and accretion of discounts to maturity computed under the effective interest method. Such amortization was included in other income, net. Interest on securities classified as held to maturity was included in other income, net. During the first quarter of 2020, the Company adopted the FASB ASU 2016-13, Financial Instruments – Credit Losses. The Company calculated the expected credit loss for each security in its portfolio using the probability-of-default method. The Company concluded the adoption of the guidance had no material impact on its consolidated financial statements.

 

Accounts receivable and allowance for doubtful accounts

 

Accounts receivable are reported at the invoiced amount less an allowance for doubtful accounts. As of each balance sheet date, the Company evaluates its accounts receivable and establishes an allowance for doubtful accounts based on a combination of specific customer circumstances and credit conditions taking into account the history of write-offs and collections. A receivable is considered past due if payment has not been received within the period agreed upon in the invoice. Accounts receivable are written off after all collection efforts have been exhausted. Recoveries of trade receivables previously written off are recorded when received.

 

Inventory

 

Inventory consists primarily of raw materials, which are recorded at the lower of cost or market, using the standard cost method, which approximates first-in, first-out (FIFO) cost. The Company periodically reviews its inventory for slow-moving, damaged and discontinued items and provides allowances to reduce such items identified to their recoverable amounts.

 

Property, equipment and leasehold improvements

 

Property, equipment and leasehold improvements are stated at cost. Major improvements that substantially extend an asset’s useful life are capitalized. Repairs, maintenance and minor improvements are charged to operations as incurred. Depreciation, including amortization of leasehold improvements and assets recorded under capital leases, is calculated using the straight-line method over the estimated useful lives of the individual assets and ranges from 3 to 39 years. Manufacturing equipment is depreciated over 3 to 15 years, office furniture and equipment are depreciated over 3 to 7 years, computer hardware and software are depreciated over 3 to 5 years, building costs are depreciated over 39 years, leasehold improvements are depreciated over the estimated lives of the related assets or the life of the lease, whichever is shorter, and building and land improvements are depreciated over 10 to 39 years. Assets not in service are not depreciated until the asset is put into use.

 

The Company follows ASC 350-40, Internal-Use Software, in accounting for internally developed software. As of December 31, 2021 and 2020, $49.4 million of software development costs were capitalized.

 

58

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

Goodwill

 

The Company recognizes goodwill in accordance with ASC 350, Intangibles—Goodwill and Other. Goodwill is the excess of cost of an acquired entity over the amounts assigned to assets acquired and liabilities assumed in a business combination. Goodwill is allocated to the Company's reporting units, which are determined by the discrete financial information available for the component and whether it is regularly reviewed by segment management. The Company's reporting units are the United States, Europe and Japan. Goodwill is not amortized.

 

Goodwill is tested for impairment annually at the beginning of the fourth quarter, and is tested for impairment between annual tests if an event occurs or circumstances change that would indicate the carrying amount may be impaired. An impairment charge for goodwill is recognized only when the estimated fair value of a reporting unit, including goodwill, is less than its carrying amount. In 2021, the Company performed a quantitative analysis based on the performance of Europe in 2021 and the amount of goodwill recorded during the year from the Hubs acquisition. The quantitative impairment test requires judgment, including the identification of reporting units, the assignment of assets, liabilities and goodwill to reporting units, and the determination of fair value of each reporting unit. The impairment test requires the comparison of the fair value of each reporting unit with its carrying amount, including goodwill. In performing the impairment test, the Company determined the fair value of its reporting units through a combination of the income approach by using discounted cash flow (DCF) analyses and the market approach through the guideline company method. Determining fair value requires the Company to make judgments about appropriate discount rates, perpetual growth rates and the amount and timing of expected future cash flows. The cash flows employed in the DCF analysis for each reporting unit are based on the reporting unit's budget, long-term business plan and recent operating performance. Discount rate assumptions are based on an assessment of the risk inherent in the future cash flows of the respective reporting unit and market conditions. Given the inherent uncertainty in determining the assumptions underlying a DCF analysis, actual results may differ from those used in the Company's valuations. In assessing the reasonableness of the determined fair values, the Company also reconciled the aggregate determined fair value of the Company to the Company's market capitalization, which, at the date of its 2021 impairment test, included a 16 percent control discount. Significant assumptions used in the DCF analysis included long-term revenue growth rates. As a result of the analyses, no impairment was identified.

 

Capitalized Software Costs

 

The Company follows ASC 350-40, Intangibles – Goodwill and Other, Internal-Use Software, in accounting for internally developed software. Costs for internal use software are evaluated by projected and capitalized where appropriate.

  

Other Intangible Assets

 

Other intangible assets include software technology, customer relationships and other intangible assets acquired from other independent parties. Other intangible assets with a definite life are amortized over a period ranging from two to 12 years on a straight line basis, and are tested for impairment whenever events or circumstances indicate that the carrying amount of an asset (asset group) may not be recoverable. An impairment loss is recognized when the carrying amount of an asset exceeds the estimated undiscounted cash flows generated by the asset. The amount of the impairment loss recorded is calculated by the excess of the asset’s carrying value over its fair value.

 

Accounting for long-lived assets

 

The Company periodically reviews the carrying amount of its property, equipment and leasehold improvements to determine if circumstances exist indicating an impairment or if depreciation periods should be modified. If facts or circumstances indicate that an impairment may exist, the Company will prepare a projection of the undiscounted future cash flows of the specific assets to determine if the assets are recoverable. If impairment exists based on these projections, an adjustment will be made to reduce the carrying amount of the specific assets to fair value.

 

Revenue recognition

 

The Company recognizes revenue for its internal and outsourced manufacturing operations in accordance with ASC 606, Revenue from Contracts with Customers. The Company manufactures custom parts to specific customer orders that have no alternative use to the Company, and the Company believes there is a legally enforceable right to payment for performance completed to date on internally and outsourced manufactured parts. For manufactured parts that meet these two criteria, the Company will recognize revenue over time. Revenue is recognized over time using the input method based on time in production as a percentage of total estimated production time to measure progress toward satisfying performance obligations using the estimated total time necessary to complete the parts per the customer's order and an estimate of inventory and production costs incurred to date. The input method requires an analysis of the incurred time in production and an estimate of the total time necessary to complete the total parts per the customer's order. The majority of the Company’s injection molding contracts have multiple performance obligations including one obligation to produce the mold and a second obligation to produce parts. For injection molding contracts with multiple performance obligations, the Company allocates revenue to each performance obligation based on its relative standalone selling price. The Company generally determines standalone selling price based on the price charged to customers.

 

Leases

 

The Company accounts for leases in accordance with ASC 842, Leases, which requires the balance sheet recognition of lease assets and lease liabilities by lessees for those leases classified as operating and finance leases. The Company determines if an arrangement is a lease at inception. Operating leases are included in operating lease assets, current operating lease liabilities and long-term operating lease liabilities in the Consolidated Balance Sheets and are recognized based on the present value of lease payments over the lease term at the commencement date. Finance leases are included in finance lease assets, current finance lease liabilities and long-term finance lease liabilities in the Consolidated Balance Sheets and are recognized based on the present value of lease payments over the lease term at commencement date. The majority of the Company’s leases do not provide an implicit rate of return, therefore, the Company uses its incremental borrowing rate based on the information available at commencement date in determining the present value of lease payments. Lease agreements that contain non-lease components, with the exception of certain real estate leases, are accounted for as a single lease component.

 

The Company has operating leases for office space, manufacturing facilities and certain company vehicles and equipment and finance leases for certain company equipment. The leases have remaining lease terms of one year to eight years. Leases with an initial term of 12 months or less are not recorded on the balance sheet; we recognize lease expense for these leases on a straight-line basis over the lease term. For purposes of calculating operating lease liabilities, lease terms may be deemed to include options to extend or terminate the lease when it is reasonably certain that the Company will exercise that option. As of December 31, 2021, the operating lease liability does not include any options to extend or terminate leases.

 

59

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

Income taxes

 

The Company accounts for income taxes in accordance with ASC 740, Income Taxes (ASC 740). Under this method, the Company determines tax assets and liabilities based upon the differences between the financial statement carrying amounts and the tax basis of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to affect taxable income. The tax consequences of most events recognized in the financial statements are included in determining income taxes currently payable. However, because tax laws and financial accounting standards differ in their recognition and measurement of assets, liabilities and equity, revenues, expenses, gains and losses, differences arise between the amount of taxable income and pretax financial income for a year and between the tax basis of assets or liabilities and their reported amounts in the financial statements. Because the Company assumes that the reported amounts of assets and liabilities will be recovered and settled, respectively, a difference between the tax basis of an asset or liability and its reported amount in the balance sheet will result in a taxable or a deductible amount in some future years when the related liabilities are settled or the reported amounts of the assets are recovered, giving rise to a deferred tax asset or liability. The Company establishes a valuation allowance for any portion of its deferred tax assets that the Company believes  may not be recognized.

 

ASC 740 also clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements by requiring that individual tax positions are recorded only when they meet a more-likely-than-not criterion. The Company recognizes the effect of income tax positions only if sustaining those positions is more likely than not. The Company records penalties and interest related to unrecognized tax benefits in income taxes in the Company’s Consolidated Statements of Income.

 

Stock-based compensation

 

The Company accounts for stock-based compensation in accordance with ASC 718, Compensation—Stock Compensation (ASC 718). Under the fair value recognition provisions of ASC 718, the Company measures stock-based compensation cost at the grant date fair value and recognizes the compensation expense over the requisite service period, which is the vesting period, using a straight-line attribution method. The amount of stock-based compensation expense recognized during a period is based on the portion of the awards that are ultimately expected to vest. The Company accounts for forfeitures as they occur. Ultimately, the total expense recognized over the vesting period will only be for those awards that vest. The Company’s awards are not eligible to vest early in the event of retirement, however, the awards vest early in the event of a change in control.

 

In determining the compensation cost of the options granted, the fair value of options granted has been estimated on the date of grant using the Black-Scholes option-pricing model.

 

Advertising costs

 

Advertising is expensed as incurred and was approximately $11.6 million, $11.5 million and $13.0 million for the years ended December 31, 2021, 2020 and 2019, respectively.

 

Research and development

 

Research and development expenses consist primarily of personnel and outside service costs related to the development of new processes and product lines, enhancements of existing product lines, development of software for internal use, maintenance of internally developed software, quality assurance and testing. Costs for internal use software are evaluated by project and capitalized where appropriate under ASC 350-40, Intangibles - Goodwill and Other, Internal-Use Software. Research and development costs were approximately $44.2 million, $36.9 million and $32.7 million for the years ended December 31, 2021, 2020 and 2019, respectively.

 

Foreign currency translation/transactions

 

The Company translated the balance sheets of its foreign subsidiaries at period-end exchange rates and the income statement at the average exchange rates in effect throughout the period. The Company has recorded the translation adjustment as a separate component of consolidated shareholders’ equity. Foreign currency transaction gains and losses are recognized in the Consolidated Statements of Comprehensive Income.

 

Recently adopted accounting pronouncements

 

In  December 2019, the Financial Accounting Standards Board issued Accounting Standards Update (ASU) 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes (ASU 2019-12). ASU 2019-12 attempts to simplify aspects of accounting for franchise taxes and enacted changes in tax laws or rates, and clarifies the accounting for transactions that result in a step-up in the tax basis of goodwill. ASU 2019-12 is effective for public business entities for fiscal years beginning after  December 15, 2020, including interim periods within that fiscal year. The Company adopted ASU 2019-12 on  January 1, 2021 and there was no material impact on the Company’s consolidated financial statements.

 

60

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

 

 

Note 3 – Revenue

 

The Company accounts for revenue in accordance with ASC 606, Revenue from Contracts with Customers. The Company provides quality, quick-turn prototyping and on-demand manufacturing services. As a result, the majority of revenue recognized in a reporting period is based on completed, invoiced contracts. 

 

A performance obligation is a promise in a contract to transfer a distinct good or service to the customer, and is the unit of account in ASC 606. The majority of the Company’s CNC machining, 3D printing, and sheet metal contracts have a single performance obligation. The majority of the Company’s injection molding contracts have multiple performance obligations including one obligation to produce the mold and a second obligation to produce parts. For injection molding contracts with multiple performance obligations, we allocate revenue to each performance obligation based on its relative standalone selling price. We generally determine standalone selling price based on the price charged to customers.

 

The Company manufactures parts that have no alternative use to the Company since the parts are custom made to specific customer orders, and the Company believes there is a legally enforceable right to payment for performance completed to date on these manufactured parts. For manufactured parts that meet these two criteria, the Company will recognize revenue over time. Revenue is recognized over time using the input method based on time in production as a percentage of total estimated production time to measure progress toward satisfying performance obligations using the estimated total time necessary to complete the parts per the customer's order and an estimate of inventory and production costs incurred to date. The input method requires an analysis of the incurred time in production and an estimate of the total time necessary to complete the total parts per the customer's order.

 

Revenue by geographic region for the years ended December 31, 2021, 2020 and 2019 was as follows:

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 

Revenue:

            

United States

 $384,458  $345,708  $360,205 

Europe

  90,399   74,796   82,805 

Japan

  13,241   13,891   15,718 

Total revenue

 $488,098  $434,395  $458,728 

 


 

Revenue by product line for the years ended December 31, 2021, 2020 and 2019 was as follows:

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 

Revenue:

            

Injection Molding

 $226,117  $217,992  $217,415 

CNC Machining

  166,811   131,587   155,473 

3D Printing

  72,721   62,502   61,352 

Sheet Metal

  20,397   18,838   21,000 

Other Revenue

  2,052   3,476   3,488 

Total revenue

 $488,098  $434,395  $458,728 

 


 

The Company generally expenses sales commissions when incurred because the amortization period would have been one year or less. These costs are recorded within marketing and sales expenses. The value of unsatisfied performance obligations for contracts with an original expected length of one year or less is not material.

 

61

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

 

 

Note 4 – Net Income Per Common Share

 

Basic net income per share is computed based on the weighted average number of common shares outstanding. Diluted net income per share is computed based on the weighted average number of common shares outstanding, increased by the number of additional shares that would have been outstanding had the potentially dilutive common shares been issued and reduced by the number of shares the Company could have repurchased from the proceeds from issuance of the potentially dilutive shares. Potentially dilutive shares of common stock include stock options and other stock-based awards granted under stock-based compensation plans and shares committed to be purchased under the employee stock purchase plan. For the year ended December 31, 2021, 113,043 anti-dilutive options were excluded from the calculation of diluted weighted average shares outstanding.

  

The following table presents the calculation of net income per basic and diluted share attributable to common shareholders:

 


 

   

Year Ended December 31,

 

(in thousands, except share and per share amounts)

 

2021

   

2020

   

2019

 
                         

Net Income

  $ 33,372     $ 50,867     $ 63,655  
                         

Basic - weighted-average shares outstanding:

    27,617,627       26,737,425       26,866,985  

Effect of dilutive securities:

                       

Employee stock options and other

    35,472       158,932       182,438  

Diluted - weighted-average shares outstanding:

    27,653,099       26,896,357       27,049,423  

Net income per share attributable to common shareholders:

                       

Basic

  $ 1.21     $ 1.90     $ 2.37  

Diluted

  $ 1.21     $ 1.89     $ 2.35  

 


 

 

 

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

 

 Note 5 Business Combinations

 

On January 22, 2021, the Company acquired all of the outstanding shares of 3D Hubs, Inc. (Hubs), for $294.1 million, consisting of $127.4 million in cash and 863,995 shares of the Company's common stock valued at $166.7 million on the closing date. The purchase agreement included additional contingent consideration of up to $52.8 million subject to the achievement of performance-based targets during fiscal 2021 and fiscal 2022. The contingent consideration consisted of up to $25.0 million in cash and up to 143,983 shares of the Company's common stock valued at $27.8 million on the closing date.

 

Hubs is based in Amsterdam, Netherlands and is a leading online manufacturing platform that provides customers with on-demand access to a global network of premium manufacturing partners. The acquisition enhances the Company’s value proposition by expanding the customer offerings, enabling the Company to more holistically serve its customers.

 

The fair value of the consideration paid for this acquisition has been allocated to the assets purchased and liabilities assumed based on their fair values as of the acquisition date, with any excess recorded as goodwill.  The goodwill associated with the acquisition represents both the strategic and growth opportunities by significantly expanding the customer offering with a network of premium manufacturing partners. The goodwill related to the acquisition is not deductible for tax purposes. 

 

The Company recorded a contingent consideration liability of $13.6 million as of the acquisition date representing the estimated fair value of the amounts payable to former shareholders, as outlined under the terms of the merger agreement, payable subject to the satisfaction of performance-based targets during fiscal year 2021 and fiscal year 2022, as noted above. The fair value of the contingent consideration (Level 3) was determined using a Monte Carlo pricing model. During the year ended December 31, 2021, the Company reversed all previously recorded contingent consideration due to the performance-based targets not being met for fiscal 2021 and those targets would not be met during fiscal 2022. The reversal of the contingent consideration was recorded as a decrease in general and administrative expense in the Consolidated Statements of Comprehensive Income.

 

The results of Hubs since the date of acquisition have been included within the Company's results. Pro forma disclosures of the consolidated results of the Company with the full year effects of Hubs, as if the acquisition had occurred on January 1, 2020, are not required and have not been separately presented since the impact to the Company's results of operations was not material.

 

The acquisition has been accounted for under the acquisition method of accounting in accordance with ASC 805, Business Combinations. Throughout fiscal 2021 the Company recorded adjustments to the preliminary allocation of the purchase price due to changes to the preliminary valuation and finalization of the working capital calculation. Adjustments from the original amounts recorded included a $3.9 million decrease to intangible assets, a $5.5 million increase to goodwill, a $3.3 million increase to contingent consideration, a $1.4 million decrease to deferred tax liabilities, and a decrease to cash paid of $0.3 million. The final purchase price allocation is as follows:

 


 

(in thousands)

       

Assets acquired:

       

Current assets

  $ 2,497  

Intangible assets

    30,770  

Goodwill

    280,925  

Other long-term assets

    1,139  

Total assets acquired

    315,331  
         

Liabilities assumed:

       

Current contingent consideration

    7,093  

Current liabilities

    5,666  

Long-term contingent consideration

    6,507  

Long-term deferred tax liabilities

    1,688  

Other long-term liabilities

    255  

Total liabilities assumed

    21,209  

Net assets acquired

  $ 294,122  
         

Cash paid

  $ 133,847  

Cash acquired

    (6,434 )

Net cash consideration

    127,413  

Equity portion of purchase price

    166,709  

Total purchase consideration

  $ 294,122  

 


 

 

63

 

Note 6 – Goodwill and Other Intangible Assets

 

The changes in the carrying amount of goodwill for the years ended December 31, 2021 and 2020 were as follows:

 


 

(in thousands)

 

Dec. 31, 2019

  

Goodwill acquired during 2020

  

Dec. 31, 2020

  

Goodwill acquired during 2021

  

Foreign currency translation adjustments during 2021

  

Dec. 31, 2021

 
                         

United States

 $123,883  $-  $123,883  $151,276  $-  $275,159 

Europe

  4,239   -   4,239   129,649   (9,067)  124,821 

Japan

  630   -   630   -   -   630 

Total goodwill

 $128,752  $-  $128,752  $280,925  $(9,067) $400,610 

 


 

Goodwill increased $280.9 million for the year ended December 31, 2021 as a result of our acquisition of Hubs. Goodwill has been allocated to the acquired Hubs entities consisting of goodwill of €106.5 million in Europe and $151.3 million in the United States as of the date of the acquisition. The Euro denominated goodwill is translated at the end of each period using the current exchange rates resulting in a foreign currency translation adjustment that is recorded as a component of Other Comprehensive Income.

 

Intangible assets other than goodwill for the years ended December 31, 2021 and 2020 were as follows: 

 


 

  

Year Ended December 31, 2021

  

Year Ended December 31, 2020

      

Weighted Average Useful Life

 

(in thousands)

 

Gross

  

Accumulated Amortization

  

Net

  

Gross

  

Accumulated Amortization

  

Net

  

Useful Life (in years)

  

Remaining (in years)

 
                                 

Marketing assets

 $930  $(713) $217  $930  $(620) $310   10.0   2.3 

Non-compete agreement

  842   (363)  479   270   (238)  32   2.0 - 5.0   2.9 

Software technology

  13,229   (5,014)  8,215   13,229   (3,645)  9,584   10.0   6.5 

Software platform

  26,725   (2,262)  24,463   -   -   -   12.0   11.1 

Tradenames

  359   (114)  245   -   -   -   3.0   2.1 

Customer relationships

  12,252   (7,873)  4,379   10,070   (5,646)  4,424   3.0 - 9.0   1.8 

Total intangible assets

 $54,337  $(16,339) $37,998  $24,499  $(10,149) $14,350         

 


 

Amortization expense for intangible assets for the years ended December 31, 2021, 2020 and 2019 was $6.2 million, $3.0 million and $3.5 million, respectively. The Euro denominated intangible assets are translated at the end of each period using the current exchange rates resulting in a foreign currency translation adjustment that is recorded as a component of Other Comprehensive Income. For the year ended December 31, 2021, the foreign currency translation adjustment was $0.9 million.  There were no foreign currency translation adjustments for the years ended December 31, 2020 and 2019.

 

Estimated aggregated amortization expense based on the current carrying value of the amortizable intangible assets is as follows:

 


 

(in thousands)

 Estimated Amortization Expense 

2022

 $6,172 

2023

  5,968 

2024

  3,790 

2025

  3,690 

2026

  3,586 

Thereafter

  14,792 

Total estimated amortization expense

 $37,998 

 


 

64

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

 

 

Note 7 – Fair Value Measurements

 

ASC 820, Fair Value Measurement (ASC 820), defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. ASC 820 also establishes a fair value hierarchy which requires classification based on observable and unobservable inputs when measuring fair value. There are three levels of inputs that may be used to measure fair value:

 

Level 1—Quoted prices in active markets for identical assets or liabilities.

 

Level 2—Observable inputs other than Level 1 prices such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.

 

Level 3—Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

 

The Company's assets and liabilities that are required to be measured or disclosed at fair value on a recurring basis include cash and cash equivalents and marketable securities. The Company’s cash consists of bank deposits. The Company’s cash equivalents measured at fair value consist of money market mutual funds. The Company determines the fair value of these investments using Level 1 inputs. The Company's marketable securities consist of short-term and long-term agency, municipal, corporate and other debt securities. Fair value for the corporate debt securities is primarily determined based on quoted market prices (Level 1). Fair values for the U.S. municipal securities, U.S. government agency securities, certificates of deposit and U.S. treasury securities are primarily determined using dealer quotes or quoted market prices for similar securities (Level 2). The Company's contingent consideration is the current fair value estimate of amounts owed to the former shareholders of Hubs and is determined using the Monte Carlo pricing model (Level 3). The Company had no contingent consideration as of December 31, 2021.

 

The following tables summarizes financial assets as of December 31, 2021 and 2020 measured at fair value on a recurring basis:

 


 

  

December 31, 2021

  

December 31, 2020

 

(in thousands)

 

Level 1

  

Level 2

  

Level 3

  

Level 1

  

Level 2

  

Level 3

 
                         

Financial Assets:

                        

Cash and cash equivalents

 $65,637  $-  $-  $72,225  $-  $- 

Money market mutual fund

  292   -   -   55,378   -   - 

Marketable securities

  7,602   18,318   -   -   -   - 

Total

 $73,531  $18,318  $-  $127,603  $-  $- 

 


 

 

65

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

 

 

Note 8 – Marketable Securities

 

The Company invests in short-term and long-term agency, municipal, corporate and other debt securities. As of December 31, 2021, the securities are categorized as available-for-sale and are recorded at fair value. As of  December 31, 2020, the securities were categorized as held-to-maturity and were recorded at amortized cost, net of an allowance for credit losses. The change in categorization was a result of the sale of securities in the first quarter of 2021 in order to partially fund the acquisition of Hubs and did not have a material impact on our financial statements. 

 

Information regarding the Company’s short-term and long-term marketable securities as of December 31, 2021 and 2020 is as follows:

 


 

  

December 31, 2021

 

(in thousands)

 

Amortized Cost

  

Unrealized Gains

  

Unrealized Losses

  

Fair Value

 
                 

U.S. government agency securities

 $2,500  $-  $(12) $2,488 

Corporate debt securities

  9,303   -   (44)  9,259 

U.S. municipal securities

  12,549   -   (70)  12,479 

Commercial paper

  -   -   -   - 

Certificates of deposit/time deposits

  1,687   7   -   1,694 

Total marketable securities

 $26,039  $7  $(126) $25,920 

 


 

 


 

  

December 31, 2020

 

(in thousands)

 

Amortized Cost

  

Unrealized Gains

  

Unrealized Losses

  

Fair Value

 
                 

U.S. government agency securities

 $18,500  $6  $(10) $18,496 

Corporate debt securities

  42,048   211   (11)  42,248 

U.S. municipal securities

  25,003   83   (2)  25,084 

Commercial paper

  2,499   -   -   2,499 

Certificates of deposit/time deposits

  5,395   93   -   5,488 

Total marketable securities

 $93,445  $393  $(23) $93,815 

 


 

Fair values for the corporate debt securities are primarily determined based on quoted market prices (Level 1). Fair values for the U.S. government agency securities, U.S. municipal securities, commercial paper and certificates of deposit are primarily determined using dealer quotes or quoted market prices for similar securities (Level 2).

 

During the first quarter of 2020, the Company adopted the FASB ASU 2016-13, Financial Instruments – Credit Losses. The Company calculated the expected credit loss for each security in its portfolio using the probability-of-default method. The Company concluded the adoption of the guidance had no material impact on its consolidated financial statements.

 

Classification of marketable securities as current or non-current is based upon the security’s maturity date as of the date of these financial statements.

 

66

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

The December 31, 2021 balance of available-for-sale debt securities by contractual maturity is shown in the following table at fair value. Actual maturities may differ from contractual maturities because the issuers of the securities may have the right to prepay obligations without prepayment penalties.

 


 

  

December 31,

 

(in thousands)

 

2021

 
     

Due in one year or less

 $11,580 

Due after one year through five years

  14,340 

Total marketable securities

 $25,920 

 


 

 

 

Note 9 – Property and Equipment

 

Property and equipment consists of the following:

 


 

   

December 31,

 

(in thousands)

 

2021

   

2020

 
                 

Land

  $ 15,009     $ 14,028  

Buildings and improvements

    107,241       77,285  

Machinery and equipment

    234,900       221,301  

Computer hardware and software

    81,889       79,207  

Leasehold improvements

    8,373       7,821  

Construction in progress

    14,489       33,780  

Total

    461,901       433,422  

Accumulated depreciation and amortization

    (181,555 )     (150,756 )

Property and equipment, net

  $ 280,346     $ 282,666  

 


 

 Depreciation expense for the years ended December 31, 2021, 2020 and 2019 was $34.3 million, $29.6 million and $27.4 million, respectively.

 

 

 

Note 10 – Inventory

 

Inventory consists primarily of raw materials, which are recorded at the lower of cost or market using the standard cost method, which approximates first-in, first-out (FIFO) cost. The Company periodically reviews its inventory for slow-moving, damaged and discontinued items and provides allowances to reduce such items identified to their recoverable amounts.

 

The Company’s inventory consists of the following:

 


 

  

December 31,

 

(in thousands)

 

2021

  

2020

 
         

Total inventory

  13,474   11,122 

Allowance for obsolescence

  (313)  (260)

Inventory, net of allowance

 $13,161  $10,862 

 


 

67

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

 

 

Note 11 – Financing Obligations

 

The Company had no financing obligations as of December 31, 2021 and 2020. 

 

 

Note 12 – Employee Benefit Plans

 

The Company maintains a 401(k) retirement plan that covers employees in the United States. Under the plan, a full-time or regular part-time (over 20 hours/week) employee becomes a participant after completing three months of employment. Employees may elect to contribute up to 50 percent of regular gross pay, subject to federal law limits on the dollar amount that participants may contribute to the plan, each calendar year. The Company matches part of the employee contributions and may make a discretionary contribution to the plan. Total employer contributions were approximately $3.7 million, $3.3 million and $3.1 million for the years ended December 31, 2021, 2020 and 2019, respectively.

 

The Company also sponsors a defined contribution retirement plan that covers the employees in the United Kingdom. Total employer contributions were approximately $0.4 million, $0.5 million and $0.3 million for the years ended December 31, 2021, 2020 and 2019, respectively.

 

 

Note 13 – Stock-Based Compensation

 

The Company has two equity incentive plans: the 2000 Stock Option Plan (2000 Plan) and the 2012 Long-Term Incentive Plan (2012 Plan). Upon the adoption of the 2012 Plan on February 12, 2012, all shares that were reserved but not issued under the 2000 Plan were assumed by the 2012 Plan. No additional awards will be issued under the 2000 Plan. Under the 2012 Plan, the Company has the ability to grant stock options, stock appreciation rights (SARs), restricted stock, performance stock, stock units, other stock-based awards and cash incentive awards. Awards under the 2012 Plan have a maximum term of ten years from the date of grant. The compensation committee of the board of directors may provide that the vesting or payment of any award will be subject to the attainment of specified performance measures in addition to the satisfaction of any continued service requirements, and the compensation committee will determine whether such measures have been achieved. The per share exercise price of stock options and SARs granted under the 2012 Plan generally may not be less than the fair market value of a share of our common stock on the date of the grant. Restricted stock is valued at fair market value on the date of grant.

 

68

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

The Company’s 2012 Employee Stock Purchase Plan (ESPP) allows eligible employees to purchase a variable number of shares of the Company’s common stock at a discount through payroll deductions of up to 15 percent of their eligible compensation, subject to plan limitations. The ESPP provides for six-month offering periods with a single purchase period, and at the end of each offering period, employees are able to purchase shares at 85 percent of the lower of the fair market value of the Company’s common stock on the first trading day of the offering period or on the last trading day of the offering period. The Company determines the fair value stock-based compensation related to its ESPP in accordance with ASC 718 using the component measurement approach and the Black-Scholes standard option pricing model.

 

Employees purchased 67,729 and 42,235 shares of common stock under the ESPP at an average exercise price of $61.96 and $85.85 during 2021 and 2020, respectively. As of December 31, 2021, 1,058,866 shares remained available for future issuance under the ESPP.

 

The Company determines its stock-based compensation in accordance with ASC 718, which requires the measurement and recognition of compensation expense for all share-based payment awards made to employees and non-employee directors based on fair value.

 

Determining the appropriate fair value model and calculating the fair value of stock option grants requires the input of subjective assumptions. The Company uses the Black-Scholes option pricing model to value its stock option awards. Stock-based compensation expense is calculated using the Company’s best estimates, which involve inherent uncertainties and the application of management’s judgment. Significant estimates include its expected term and stock price volatility.

  

The expected term of stock options is estimated from the vesting period of the award and represents the weighted average period that the Company's stock options are expected to be outstanding. The Company estimates the volatility of its stock price based on the historic volatility of its common stock. The Company bases the risk-free interest rate that it uses in the Black-Scholes option pricing model on U.S. Treasury instruments with maturities similar to the expected term of the award being valued. The Company has never paid and does not anticipate paying, any cash dividends in the foreseeable future and, therefore, the Company uses an expected dividend yield of zero in the option pricing model. The Company accounts for forfeitures as they occur. The Company recognizes stock-based compensation expense on a straight-line basis over the requisite service period.

 

The following table summarizes stock-based compensation expense for the years ended December 31, 2021, 2020 and 2019, respectively:

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 
             

Stock options and other

 $17,553  $13,327  $9,591 

Employee stock purchase plan

  1,542   1,346   1,190 

Total stock-based compensation expense

 $19,095  $14,673  $10,781 
             

Cost of revenue

 $2,595  $2,451  $2,056 

Operating expenses:

            

Marketing and sales

  3,736   3,121   2,632 

Research and development

  2,833   2,440   1,851 

General and administrative

  9,931   6,661   4,242 

Total stock-based compensation expense

 $19,095  $14,673  $10,781 

 


 

69

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

Stock Options

 

The following table provides the assumptions used in the Black-Scholes option pricing model for the years ended December 31, 2021, 2020 and 2019:

 


 

  

Year Ended December 31,

 
  

2021

  

2020

  

2019

 
             

Risk-free interest rate

  0.80 - 1.12%   0.50 - 1.47%   2.35 - 2.58% 

Expected life (years)

  6.25   6.25   6.25 

Expected volatility

  45.28 - 45.53%   42.40 - 43.83%   42.52 - 42.74% 

Expected dividend yield

  0%   0%   0% 

Weighted average grant date fair value

  $128.14   $45.32   $47.84 

 


 

The following table summarizes stock option activity and the weighted average exercise price for the years ended December 31, 2021, 2020 and 2019:

 


 

      

Weighted-

 
      

Average

 
  

Stock Options

  

Exercise Price

 
         

Options outstanding at January 1, 2019

  252,616  $64.71 

Granted

  53,708   105.81 

Exercised

  (16,079)  48.67 

Cancelled

  (13,979)  89.50 

Options outstanding at December 31, 2019

  276,266   72.38 

Granted

  60,065   105.79 

Exercised

  (68,958)  57.00 

Cancelled

  (37,842)  67.92 

Options outstanding at December 31, 2020

  229,531   86.46 

Granted

  57,901   128.14 

Exercised

  (28,991)  58.78 

Cancelled

  (25,057)  109.31 

Options outstanding at December 31, 2021

  233,384  $97.78 
         

Exercisable at December 31, 2021

  115,700  $81.30 

 


 

The outstanding options have a term of 10 years. For employees, options that have been granted become exercisable ratably over the vesting period, which is generally a four- or five-year period, beginning on the first anniversary of the grant date, subject to the employee’s continuing service to the Company. For directors, options generally become exercisable in full on the first anniversary of the grant date.

 

The total intrinsic value of options exercised during the years ended December 31, 2021, 2020 and 2019, was $3.8 million, $5.4 million and $0.9 million, respectively. The aggregate intrinsic value represents the cumulative difference between the fair market value of the underlying common stock and the option exercise prices.

 

For options outstanding at December 31, 2021, the weighted-average remaining contractual term was 6.7 years and the aggregate intrinsic value was $0.1 million. For options exercisable at December 31, 2021, the weighted-average remaining contractual term was 5.0 years and the aggregate intrinsic value was $0.1 million. Refer to the table below for additional information.

 

70

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

The following table summarizes information about stock options outstanding at December 31, 2021:

 


 

  

Options Outstanding, Vested and Expected to Vest

  

Options Exercisable

 

Range of Exercise Prices

 Number Outstanding  Weighted Average Remaining Contractual Life  

Weighted Average Exercise Price ($)

  Number Exercisable  

Weighted Average Exercise Price ($)

 
                  

$7.76 to $31.43

 4,624  0.35  

30.58

  4,624  

30.58

 

$31.44 to $66.87

 50,159  3.58  

57.13

  45,986  

57.02

 

$66.88 to $96.20

 41,586  7.82  

89.95

  9,570  

71.68

 

$96.21 to $180.46

 137,015  7.67  

117.31

  55,520  

107.28

 

 


 

The fair value of share-based payment transactions is recognized in the Consolidated Statements of Comprehensive Income. As of December 31, 2021, there was $4.3 million of total unrecognized compensation cost related to unvested stock options, which is expected to be recognized over a weighted average period of 2.6 years. The total fair value of options vested was $2.1 million, $1.8 million and $1.5 million for the years ended December 31, 2021, 2020 and 2019, respectively.

 

Restricted Stock

 

The 2012 Plan provides for the award of restricted stock or restricted stock units. Restricted stock awards are share settled and restrictions lapse ratably over the vesting period, which is generally a three- to five-year period, beginning on the first anniversary of the grant date, subject to the employee’s continuing service to the Company. For directors, restrictions generally lapse in full on the first anniversary of the grant date.

 

The following table summarizes restricted stock activity for the years ended December 31, 2021, 2020 and 2019

 


 

      

Weighted-

 
      

Average

 
      

Grant Date

 
  

Restricted

  

Fair Value

 
  

Stock Awards

  

Per Share

 
         

Restricted stock at January 1, 2019

  323,921  $79.85 

Granted

  115,471   106.35 

Restrictions lapsed

  (92,597)  77.25 

Forfeited

  (31,822)  87.58 

Restricted stock at December 31, 2019

  314,973   89.55 

Granted

  108,179   111.76 

Restrictions lapsed

  (101,941)  84.70 

Forfeited

  (14,012)  94.24 

Restricted stock at December 31, 2020

  307,199   98.87 

Granted

  205,996   123.61 

Restrictions lapsed

  (115,908)  91.26 

Forfeited

  (53,505)  128.05 

Restricted stock at December 31, 2021

  343,782  $111.79 

 


 

71

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

As of December 31, 2021, there was $26.0 million of unrecognized compensation expense related to non-vested restricted stock, which is expected to be recognized over a weighted-average period of 2.4 years.

 

Performance Stock

 

Performance stock units (PSUs) are expressed in terms of a target number of PSUs, with anywhere between 0 percent and 150 percent of that target number capable of being earned and vesting at the end of a three-year performance period depending on the Company’s performance in the final year of the performance period and the award recipient’s continued employment. The Company’s PSUs granted from 2017 to 2019 and certain PSUs granted in 2021 are based on performance conditions and the related compensation cost is based on the probability that the performance conditions will be achieved. The Company’s PSUs granted in 2020 and certain PSUs granted in 2021 are based on market conditions and the related compensation cost is based on the fair value at grant date calculated using a Monte Carlo pricing model.

 

The following table summarizes performance stock activity for the years ended December 31, 2021, 2020 and 2019

 


 

      

Weighted-

 
      

Average

 
      

Grant Date

 
  

Performance

  

Fair Value

 
  

Stock Awards

  

Per Share

 
         

Performance stock at January 1, 2019

  52,140  $76.54 

Granted

  21,434   104.99 

Restrictions lapsed

  -   - 

Performance change

  (61,816)  88.06 

Forfeited

  (2,375)  105.37 

Performance stock at December 31, 2019

  9,383   58.35 

Granted

  19,956   118.66 

Restrictions lapsed

  (7,113)  58.35 

Performance change

  -   - 

Forfeited

  (2,270)  58.35 

Performance stock at December 31, 2020

  19,956   118.66 

Granted

  15,078   203.64 

Restrictions lapsed

  -   - 

Performance change

  (10,366)  192.95 

Forfeited

  (7,829)  113.91 

Performance stock at December 31, 2021

  16,839  $115.56 

 


 

As of December 31, 2021, there was $0.8 million of unrecognized compensation expense related to non-vested performance stock, which is expected to be recognized over a weighted-average period of 1.8 years.

 

Employee Stock Purchase Plan

 

The following table presents the assumptions used to estimate the fair value of the ESPP during the years ended December 31, 2021, 2020 and 2019:

 


 

  

Year Ended December 31,

 
  

2021

  

2020

  

2019

 
          

Risk-free interest rate

 0.06 - 0.17%  0.12 - 0.17%  1.59 - 2.35% 

Expected life (months)

 6.00  6.00  6.00 

Expected volatility

 53.44 - 65.53%  50.85 - 59.99%  42.63 - 53.57% 

Expected dividend yield

 0%  0%  0% 

 


 

72

 
 

Note 14 – Leases

 

Supplemental balance sheet information related to leases was as follows:

 


 

  

December 31,

 

(in thousands)

 

2021

  

2020

 

Operating lease assets

 $5,578  $9,855 
         

Current operating lease liabilities

 $3,298  $3,272 

Long-term operating lease liabilities

  2,245   7,586 

Total operating lease liabilities

 $5,543  $10,858 
         
         

Finance lease assets

 $1,898  $2,396 
         

Current finance lease liabilities

 $550  $552 

Long-term finance lease liabilities

  1,351   1,919 

Total finance lease liabilities

 $1,901  $2,471 

 


 

Lease expense is recognized on a straight-line basis over the lease term, with variable payments recognized in the period those payments are incurred. The components of lease expense for the periods reported were as follows:

 


 

  

Twelve Months Ended December 31,

 

(in thousands)

 

2021

  

2020

 

Operating lease cost

 $3,391  $4,191 

Finance lease cost:

        

Amortization of right-of-use assets

 $498  $143 

Interest on lease obligations

 $9  $2 

Variable lease cost

  719   989 

Total lease cost

 $4,617  $5,325 

 


 

73

 

Maturities of operating and finance lease liabilities as of December 31, 2021 were as follows:

 


 

(in thousands)

 

Operating Leases

  

Finance Leases

 

Year Ending December 31,

        

2022

 $2,550  $561 

2023

  1,308   1,352 

2024

  751   - 

2025

  711   - 

2026

  344   - 

After 2027

  -   - 

Total future minimum lease payments

  5,664   1,913 

Less interest

  (121)  (12)

Present value of lease liabilities

 $5,543  $1,901 

 


 

As of December 31, 2021, we have no operating or finance leases that have not yet commenced.

 

Weighted average remaining lease term and discount rate was as follows: 

 


 

  

December 31,

 
  

2021

  

2020

 

Weighted Average Remaining Lease Term - operating leases (years)

  3.1   4.4 

Weighted Average Remaining Lease Term - finance leases (years)

  1.5   2.5 

Weighted Average Discount Rate - operating leases

  1.6%  2.6%

Weighted Average Discount Rate - finance leases

  0.4%  0.5%

 


 

Supplemental cash flow information related to leases was as follows:

 


 

  

Twelve Months Ended December 31,

 

(in thousands)

 

2021

  

2020

 

Cash paid for amounts included in the measurement of lease liabilities:

        

Operating cash flows from operating leases

 $10,477  $4,426 

Operating cash flows from finance leases

 $9  $2 

Financing cash flows from finance leases

 $552  $154 
         

Lease assets obtained in exchange for new operating lease liabilities

  5,293   1,506 

Lease assets obtained in exchange for new financing lease liabilities

  -   2,523 

 


 

74

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

 

 

Note 15 – Accumulated Other Comprehensive Loss

 

Other comprehensive loss is comprised of foreign currency translation adjustments and net unrealized gains (losses) on investments in securities. The following table presents the changes in accumulated other comprehensive loss balances for the years ending December 31, 2021, 2020 and 2019, respectively:

 


 

   

Year Ended December 31,

 

(in thousands)

 

2021

   

2020

   

2019

 
                         

Balance at beginning of period

  $ (3,420 )   $ (7,018 )   $ (8,492 )

Foreign currency translation adjustments

                       

Other comprehensive (loss) income before reclassifications

    (13,278 )     3,598       1,474  

Amounts reclassified from accumulated other comprehensive income (loss)

    -       -       -  

Net current-period other comprehensive (loss) income

    (13,278 )     3,598       1,474  

Net unrealized gains (losses) on investments in securities

                       

Other comprehensive (loss) income before reclassifications

    (119 )     -       -  

Amounts reclassified from accumulated other comprehensive income (loss)

    -       -       -  

Net current-period other comprehensive (loss) income

    (119 )     -       -  

Balance at end of period

  $ (16,817 )   $ (3,420 )   $ (7,018 )

 


 

 

 

Note 16 – Income Taxes

 

The Company is subject to income tax in multiple jurisdictions and the use of estimates is required to determine the provision for income taxes. For the years ended December 31, 2021, 2020 and 2019, the Company recorded an income tax provision of $6.8 million, $12.1 million and $17.5 million, respectively. The effective income tax rate for the years ended December 31, 2021, 2020 and 2019 was 17.0 percent, 19.2 percent and 21.6 percent, respectively.

 

75

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

The effective tax rate decreased by 2.2% for the year ended December 31, 2021 when compared to 2020 primarily due to a one-time benefit from the revaluation of contingent consideration and a benefit from the decrease in the tax liability for uncertain tax positions resulting from the expiration of the statute of limitations. These benefits were partially offset by an increase in the valuation allowances on losses from foreign operations. 

 

The Coronavirus Aid, Relief, and Economic Security (CARES) Act was signed into law on March 27, 2020. The CARES Act was meant to infuse companies with various income and payroll tax cash benefits to ease the impact of the pandemic. A technical correction to the Tax Cuts and Jobs Act of 2017 was included in the CARES Act allowing qualified improvement property to claim bonus depreciation for respective assets placed in service in 2018 and 2019. The impact of the CARES Act to the Company was a $2.9 million reduction to income taxes payable and a corresponding increase to deferred tax liability for the year ended December 31, 2020. In addition, the Company elected to defer deposits of the employer portion of the Social Security tax for the quarter ended March 31, 2020 through the quarter ended December 31, 2020. The Social Security taxes deferred in 2020 were paid in 2021.

 

The provision for income taxes is based on income before income taxes reported for financial statement purposes. The components of income before income taxes are as follows:

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 
             

Domestic

 $42,449  $58,551  $74,841 

Foreign

  (2,265)  4,394   6,352 

Total

 $40,184  $62,945  $81,193 

 


 

Significant components of the provision for income taxes for the following periods are as follows:

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 
             

Current:

            

Federal

 $5,552  $2,128  $6,991 

State

  975   1,136   2,882 

Foreign

  (64)  1,241   1,544 

Deferred

            

Federal

  (377)  6,904   5,121 

State

  (814)  (431)  269 

Foreign

  (1,181)  210   (809)

Valuation Allowance

  2,721   890   1,540 

Total

 $6,812  $12,078  $17,538 

 


 

76

 

A reconciliation of the federal statutory income tax rate to the effective tax rate is as follows:

 


 

  

Year Ended December 31,

 
  

2021

  

2020

  

2019

 
             

Federal tax statutory rate

  21.0%  21.0%  21.0%

State tax (net of federal benefit)

  2.1   2.1   2.1 

Share based compensation

  (2.3)  (1.3)  (0.5)

Valuation allowance against deferred tax assets

  8.9   2.0   1.4 

Contingent consideration reduction

  (7.0)  -   - 

Research and development credit

  (4.0)  (3.7)  (2.8)

Foreign rate differential

  (2.2)  (0.8)  (0.3)

Tax reserves

  (1.0)  1.4   1.1 

Provision to return difference

  (0.7)  (1.4)  - 

Miscellaneous

  2.2   (0.1)  (0.4)

Total

  17.0%  19.2%  21.6%

 


 

Significant components of deferred tax assets and liabilities are as follows:

 


 

  

December 31,

 

(in thousands)

 

2021

  

2020

 
         

Deferred tax assets:

        

Accrued expenses

 $2,511  $2,155 

Leases

  1,830   3,598 

Warrants and stock options

  4,271   3,356 

Intangible assets

  -   1,693 

Inventories

  205   172 

Research and development credit

  2,126   1,661 

Other assets

  1,111   129 

Net operating loss

  14,046   6,647 

Less valuation allowance

  (13,999)  (9,138)

Total deferred tax assets

  12,101   10,273 

Deferred tax liabilities:

        

Depreciation

  (31,897)  (32,671)

Goodwill

  (9,872)  (7,858)

Intangible assets

  (4,394)  - 

Leases

  (1,830)  (3,598)

Total deferred tax liabilities

  (47,993)  (44,127)

Net deferred tax liability

 $(35,892) $(33,854)

 


 

The Company has recorded no U.S. deferred taxes related to the undistributed earnings of its non-U.S. subsidiaries as of December 31, 2021. Such amounts are intended to be reinvested outside of the United States indefinitely. It is not practicable to estimate the amount of additional tax that might be payable on the foreign earnings. As of December 31, 2021, the Company had accumulated undistributed earnings in non-U.S. subsidiaries of $2.7 million.

  

As of December 31, 2021, the Company had estimated net operating loss carry forwards of $14.0 million for tax purposes. The net operating losses relate to operations in Japan, Germany and Netherlands. Japan losses can be carried forward for up to ten years. The remaining Japan net operating losses begin to expire at various dates between 2022 and 2031. The Company’s Japan operations are taxed both by local authorities and in the U.S. Germany net operating losses may be carried forward without any time limitations but are limited to €1 million, plus 60 percent of taxable income exceeding €1 million. Netherlands net operating losses may be carried forward without any time limitations, but are limited to €1 million, plus 50 percent of taxable income exceeding €1 million.

 

77

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

The Company establishes valuation allowances for deferred tax assets when, after consideration of all positive and negative evidence, it is considered more-likely-than-not that a portion of the deferred tax assets will not be realized. The Company's valuation allowances of $14.0 million and $9.1 million at December 31, 2021 and 2020, respectively, reduce the carrying value of deferred tax assets associated with certain net operating loss carry forwards and other assets with insufficient positive evidence for recognition. The increase in the valuation allowance is primarily attributable to the Netherlands net operating losses acquired in 2021 via the Hubs acquisition.

 

The Company files a U.S. federal income tax return and income tax returns in various states and foreign jurisdictions. With a few exceptions, the Company is no longer subject to U.S. federal, state, or foreign income tax examinations by tax authorities for years before 2017.

 

The Company has liabilities related to unrecognized tax benefits totaling $4.4 million and $4.8 million at December 31, 2021 and 2020, respectively, that if recognized would result in a reduction of the Company’s effective tax rate. The liabilities are classified as other long-term liabilities in the accompanying consolidated balance sheets. The Company recognizes interest and penalties related to income tax matters in income tax expense and reports the liability in current or long-term income taxes payable as appropriate. Interest and penalties were immaterial for each of the years ended December 31, 2021, 2020 and 2019.

 

A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:

 


 

  

December 31,

 
  

2021

  

2020

 
         

Balance at beginning of period

 $4,830  $4,598 

Additions for tax positions of current year

  491   324 

Additions for tax positions of prior years

  781   475 

Decrease related to expiration of statutes of limitations

  (1,738)  (567)

Balance at period end

 $4,364  $4,830 

 


 

 

 

Note 17 – Litigation

 

From time to time, the Company may be subject to various legal proceedings and claims that arise in the ordinary course of its business. Although the results of litigation and claims cannot be predicted with certainty, the Company does not believe it is a party to any litigation the outcome of which, if determined adversely, would individually or in the aggregate be reasonably expected to have a material adverse effect on its business.

  

 

 

Note 18 – Segment Reporting

 

The Company’s reportable segments are based on the internal reporting used by the Company’s CEO, who is the chief operating decision maker (CODM), to assess operating performance and make decisions about the allocation of resources. The Company’s reportable segments are based upon geographic region, consisting of the United States and Europe. The Corporate Unallocated and Japan category includes non-reportable segments, as well as research and development and general and administrative costs that are global in nature and that the Company does not allocate directly to its operating segments.

  

Revenue in the United States is derived from Injection Molding, CNC Machining, 3D Printing and Sheet Metal product lines. Revenue in Europe is derived from Injection Molding, CNC Machining, and 3D Printing product lines. Revenue in Japan is derived from Injection Molding and CNC Machining product lines. Injection Molding revenue consists of sales of custom injection molds and injection-molded parts. CNC Machining revenue consists of sales of CNC-machined and lathe-turned customer parts. 3D Printing revenue consists of sales of 3D-printed parts. Sheet Metal revenue consists of sales of fabricated sheet metal parts.

 

78

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 

The accounting policies of the reportable segments are the same as those described in Note 2 – Summary of Significant Accounting Policies. Intercompany transactions primarily relate to intercontinental activity and have been eliminated and are excluded from the reported amounts. The difference between income from operations and pre-tax income relates to foreign currency-related gains and losses and interest income on cash balances and investments, which are not allocated to business segments.

 

Beginning in 2020, the Company's CODM made a decision to view certain research and development costs by geographic region. As a result, costs previously included in the Corporate Unallocated and Japan category have been included in the respective geographic regions. All periods presented have been restated to reflect this change.

 

Revenue and income from operations by reportable segment are as follows:

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 

Revenue:

            

United States

 $384,458  $345,708  $360,205 

Europe

  90,399   74,796   82,805 

Japan

  13,241   13,891   15,718 

Total revenue

 $488,098  $434,395  $458,728 

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 

Income from Operations:

            

United States

 $98,001  $98,762  $108,594 

Europe

  730   11,707   15,077 

Corporate Unallocated and Japan

  (58,389)  (50,633)  (43,815)

Total income from operations

 $40,342  $59,836  $79,856 

 


 

Total long-lived assets, expenditures for additions to long-lived assets and depreciation and amortization expense are as follows:

 


 

  

December 31,

  

December 31,

  

December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 

Long-lived assets:

            

United States

 $215,701  $215,721  $210,171 

Europe

  59,388   59,388   45,019 

Japan

  5,257   7,557   8,522 

Total long-lived assets

 $280,346  $282,666  $263,712 

  


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 

Expenditures for additions to long-lived assets:

            

United States

 $26,698  $29,984  $45,123 

Europe

  7,378   16,574   14,743 

Japan

  133   452   2,364 

Total expenditures for additions to long-lived assets

 $34,209  $47,010  $62,230 

 


 

79

 

Proto Labs, Inc.

Notes to Consolidated Financial Statements

 


 

  

Year Ended December 31,

 

(in thousands)

 

2021

  

2020

  

2019

 

Depreciation and Amortization:

            

United States

 $31,642  $25,744  $24,767 

Europe

  7,101   5,024   4,746 

Japan

  1,745   1,826   1,351 

Total depreciation and amortization

 $40,488  $32,594  $30,864 

 


 
80

 

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

Not applicable.

 

Item 9A. Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (Exchange Act)) as of the end of the period covered by this report. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of the period covered by this Annual Report on Form 10-K, our disclosure controls and procedures were effective and provided reasonable assurance that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported accurately and within the timeframes specified in the SEC’s rules and forms and accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

Management’s Annual Report on Internal Control Over Financial Reporting

 

The Company’s management is responsible for establishing and maintaining an adequate system of internal control over financial reporting, as defined in the Exchange Act Rule 13a-15(f). Management conducted an assessment of the Company’s internal control over financial reporting based on the framework established by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control – Integrated Framework (2013 framework). Based on the assessment, management concluded that, as of December 31, 2021, the Company’s internal control over financial reporting is effective. The Company’s registered public accounting firm’s attestation report on the Company’s internal control over financial reporting is provided in Part II, Item 8 of this Annual Report on Form 10-K.

 

Management has excluded certain elements of Hubs from its assessment of internal control over financial reporting as of December 31, 2021. Those elements of the acquired business’s internal control over financial reporting that were not fully integrated into the Company’s existing internal control over financial reporting during 2021 have been excluded from management’s assessment of the effectiveness of internal control over financial reporting. Hubs is a wholly-owned subsidiary of the Company; its combined total assets (excluding goodwill) and total revenues excluded from our assessment represent approximately 4% and 7%, respectively, of the related consolidated financial statements amounts as of the year ended December 31, 2021.

 

Changes in Internal Control over Financial Reporting

 

During the first quarter of 2021, the Company completed the implementation of PL 2.0, an internal business systems initiative impacting both external customer-facing and internal back-end systems. Emphasis has been on the maintenance of effective internal controls throughout development and deployment of all phases. The Company evaluated and concluded the implementation of PL 2.0 has not materially affected the Company's internal control over financial reporting. Based on this evaluation, there have been no changes in our internal control over financial reporting (as such term is defined in Rule 13a-15(f) under the Exchange Act) during the period covered by this report that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

Item 9B. Other Information

 

None.

 

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections

 

None.

 

 

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

 

The information required by this item with respect to Item 401 relating to executive officers is contained in Item 1 of this Annual Report on Form 10-K under the heading “Executive Officers of the Registrant” and with respect to other information relating to our directors will be set forth in our 2021 Proxy Statement under the caption “Proposal 1 — Election of Directors,” which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K, and is incorporated herein by reference.

 

The information required by this item under Item 405 of Regulation S-K is incorporated herein by reference to the section titled “Corporate Governance — Section 16(a) Beneficial Ownership Reporting Compliance” of our 2022 Proxy Statement, which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K. The information required by this item under Items 407 (c)(3), (d)(4) and (d)(5) of Regulation S-K is incorporated herein by reference to the section titled “Corporate Governance” of our 2015 Proxy Statement, which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

 

We have adopted a Code of Ethics and Business Conduct that applies to all of our directors, officers and employees, including our principal executive officer and principal financial officer. The Code of Ethics and Business Conduct is available on our website at www.protolabs.com under the Investors Relations section. We plan to post to our website at the address described above any future amendments or waivers of our Code of Ethics and Business Conduct.

 

Item 11. Executive Compensation

 

Information related to this item is incorporated herein by reference to the sections titled “Compensation Discussion and Analysis,” “Corporate Governance — Compensation Committee Interlocks and Insider Participation,” and “Compensation Committee Report” of our 2022 Proxy Statement, which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management

 

Information related to security ownership required by this item is incorporated herein by reference to the section titled “Security Ownership of Certain Beneficial Owners and Management” of our 2022 Proxy Statement, which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K. Information related to our equity compensation plans required by this item is incorporated herein by reference to the section titled “Compensation Discussion and Analysis – Elements of Executive Compensation” of our 2022 Proxy Statement, which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

 

Outstanding Equity Awards

 

The following table summarizes, as of December 31, 2021, information about shares of our common stock that may be issued under equity compensation plans approved by shareholders and plans not approved by shareholders:

 


 

Plan Category   Number of shares to be issued upon exercise of outstanding options, warrants and rights     Weighted-average exercise price of outstanding options, warrants and rights     Number of shares remaining available for future issuance under equity compensation plans (excluding shares in first column)  
                     
Equity compensation plans approved by shareholders(1)   594,005       $97.78     5,766,876(2)  

Equity compensation plans not approved by shareholders

 

None

      N/A    

None

 

 

(1)

Includes the 2000 Stock Option Plan, the 2012 Long-Term Incentive Plan and our Employee Stock Purchase Plan.

(2)

Includes 1,058,866 shares remaining available for issuance as of December 31, 2021 under our Employee Stock Purchase Plan.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

 

Information required by this item is incorporated herein by reference to the sections titled “Corporate Governance — Certain Relationships and Related Party Transactions,” and “Corporate Governance — Director Independence” of our 2022 Proxy Statement, which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

 

Item 14. Principal Accountant Fees and Services

 

Information required by this item is incorporated herein by reference to the section titled “Fees Paid to Independent Registered Public Accounting Firm” of our 2022 Proxy Statement, which will be filed no later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

 

 

PART IV

 

Item 15. Exhibits and Financial Statement Schedules

 

(a) The following documents are filed as part of this report:

 

1. Consolidated Financial Statements

 

See Index to Consolidated Financial Statement at Item 8 herein.

 

2. Financial Statement Schedules

 

Schedules not listed above have been omitted because the information required to be set forth therein is not applicable or is shown in the financial statement or notes herein.

 

3. Exhibits

 

See the Exhibit Index immediately following the signature page of this Annual Report on Form 10-K.

 

 

Exhibit Number

 

Description of Exhibit

2.1(28)

 

Agreement and Plan of Merger, dated January 18,2021, by and among 3D Hubs, Inc., Proto Labs, Inc., Lithium Merger Sub I, Inc., Lithium Merger Sub II, Inc. and Shareholder Representative Services, LLC

3.1(1)

 

Third Amended and Restated Articles of Incorporation of Proto Labs, Inc.

3.2(26)

 

Articles of Amendment to Third Amended and Restated Articles of Incorporation of Proto Labs, Inc. dated May 20, 2015

3.3(2)

 

Second Amended and Restated By-Laws of Proto Labs, Inc, as amended through November 8, 2016.

4.1(3)

 

Form of certificate representing common shares of Proto Labs, Inc.

4.2(30)   Description of Securities of Registrant

10.1(4)#

 

2012 Long-Term Incentive Plan, as amended as of August 5, 2015

10.2(5)#

 

Form of Incentive Stock Option Agreement under 2012 Long-Term Incentive Plan

10.3(6)#

 

Form of Non-Statutory Stock Option Agreement (Directors) under 2012 Long-Term Incentive Plan

10.4(7)#

 

Form of Non-Statutory Stock Option Agreement (U.S. Employees) under 2012 Long-Term Incentive Plan

10.5(8)#

 

Form of Non-Statutory Stock Option Agreement (U.K. Employees) under 2012 Long-Term Incentive Plan

10.6(9)#

 

Employee Stock Purchase Plan

10.7(10)

 

Stock Subscription Warrant issued to John B. Tumelty

10.8(11)#

 

2000 Stock Option Plan, as amended

10.9(12)#

 

Form of Incentive Stock Option Agreement under 2000 Stock Option Plan

10.10(13)#

 

Form of Non-Statutory Stock Option Agreement (Directors) under 2000 Stock Option Plan

10.11(14)#

 

Form of Non-Statutory Stock Option Agreement (U.S. Employees) under 2000 Stock Option Plan

10.12(15)#

 

Form of Non-Statutory Stock Option Agreement (U.S. Employees) under 2000 Stock Option Plan

10.13(16)#

 

Form of Non-Statutory Stock Option Agreement (U.K. Employees) under 2000 Stock Option Plan

10.14(17)#

 

Amended and Restated Credit Agreement, dated as of September 30, 2011, between Proto Labs, Inc. and Wells Fargo Bank, N.A.

10.15(18)#

 

Credit Agreement, dated November 27, 2017, by and among Proto Labs and Wells Fargo Bank, National Association

10.16(19)#

 

Form of U.S. Severance Agreement

10.17(20)#

 

Form of UK Severance Agreement

10.18(21)#

 

Amended and Restated Executive Employment Agreement, dated August 1, 2019, by and between Proto Labs, Inc. and Victoria M. Holt

10.19(22)#

 

Form of Restricted Stock Agreement under 2012 Long-Term Incentive Plan for the initial grant to Victoria M. Holt

10.20(23)#

 

Form of Restricted Stock Unit Agreement under 2012 Long-Term Incentive Plan (U.S. Employees)

10.21(24)#

 

Form of Restricted Stock Unit Agreement under 2012 Long-Term Incentive Plan (U.K. Employees)

10.22(25)#

 

Form of Restricted Stock Unit Agreement under 2012 Long-Term Incentive Plan (Directors)

10.24(27)#

 

Form of Performance Stock Unit Agreement under 2012 Long-Term Incentive Plan

10.25(29)#

 

Form of Deferred Stock Unit Agreement under 2012 Long-Term Incentive Plan

10.27(31)#   Form of Executive Severance Agreement
10.22(32)   Executive Employment Agreement, dated January 29, 2021, by and between Proto Labs, Inc. and Robert Bodor
10.23(33)   Consulting Agreement, dated February 4, 2021, by and between Proto Labs, Inc. and Victoria M. Holt

21.1

 

Subsidiaries of Proto Labs, Inc.

23.1

 

Consent of Ernst & Young LLP

24.1

 

Powers of Attorney

31.1

 

Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act

31.2

 

Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act

32.1*

 

Certification of the Chief Executive Officer and the Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act

101.INS**

 

XBRL Instance Document- the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.

101.SCH**

 

Inline XBRL Taxonomy Extension Schema Document

101.CAL**

 

Inline XBRL Taxonomy Extension Calculation Linkbase Document

101.DEF**

 

Inline XBRL Taxonomy Extension Definition Linkbase Document

101.LAB**

 

Inline XBRL Taxonomy Extension Label Linkbase Document

101.PRE**

 

Inline XBRL Taxonomy Extension Presentation Linkbase Document

104   Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)

 

 

(1)

Incorporated by reference to Exhibit 3.2 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on February 13, 2012.

(2)

Incorporated by reference to Exhibit 3.1 to the Company’s Form 8-K, filed with the Commission on November 8, 2016.

(3)

Incorporated by reference to Exhibit 4.1 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on February 1, 2012.

(4)

Incorporated by reference to Exhibit 10.1 to the Company’s Form 10-Q, filed with the Commission on November 3, 2015.

(5)

Incorporated by reference to Exhibit 10.14 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on February 13, 2012.

(6)

Incorporated by reference to Exhibit 10.15 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on February 13, 2012.

(7)

Incorporated by reference to Exhibit 10.16 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on February 13, 2012.

(8)

Incorporated by reference to Exhibit 10.17 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on February 13, 2012.

(9)

Incorporated by reference to Exhibit 10.18 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on February 13, 2012.

(10)

Incorporated by reference to Exhibit 99.7 to the Company’s Registration Statement on Form S-8 (File No. 333-179651), filed with the Commission on February 23, 2012.

(11)

Incorporated by reference to Exhibit 10.7 to the Company’s Registration Statement on Form S-1 (File No. 333-175745), filed with the Commission on July 25, 2011.

(12)

Incorporated by reference to Exhibit 10.8 to the Company’s Registration Statement on Form S-1 (File No. 333-175745), filed with the Commission on July 25, 2011.

(13)

Incorporated by reference to Exhibit 10.9 to the Company’s Registration Statement on Form S-1 (File No. 333-175745), filed with the Commission on July 25, 2011.

(14)

Incorporated by reference to Exhibit 10.10 to the Company’s Registration Statement on Form S-1 (File No. 333-175745), filed with the Commission on July 25, 2011.

(15)

Incorporated by reference to Exhibit 10.11 to the Company’s Registration Statement on Form S-1 (File No. 333-175745), filed with the Commission on July 25, 2011.

(16)

Incorporated by reference to Exhibit 10.12 to the Company’s Registration Statement on Form S-1 (File No. 333-175745), filed with the Commission on July 25, 2011.

(17)

Incorporated by reference to Exhibit 10.19 to the Company’s Registration Statement on Form S-1/A (File No. 333-175745), filed with the Commission on October 26, 2011.

(18)

Incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K, filed with the Commission on December 1, 2017.

(19)

Incorporated by reference to Exhibit 99.1 to the Company’s Form 8-K, filed with the Commission on March 1, 2013.

(20)

Incorporated by reference to Exhibit 10.2 to the Company’s Form 10-Q, filed with the Commission on May 8, 2013.

(21)

Incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K, filed with the Commission on August 2, 2019.

(22)

Incorporated by reference to Exhibit 10.2 to the Company’s Form 8-K, filed with the Commission on February 6, 2014.

(23)

Incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K, filed with the Commission on February 12, 2014.

(24)

Incorporated by reference to Exhibit 10.2 to the Company’s Form 8-K, filed with the Commission on February 12, 2014.

(25)

Incorporated by reference to Exhibit 99.6 to the Company's Registration Statement on Form S-8 (file No. 333-194272), filed with the Commission on March 3, 2014.

(26)

Incorporated by reference to Exhibit 3.1 to the Company’s Form 8-K, filed with the Commission on May 21, 2015.

(27)

Incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K, filed with the Commission on February 17, 2017.

(28)

Incorporated by reference to Exhibit 2.1 to the Company’s Form 8-K, filed with the Commission on January 18, 2021.

(29)

Incorporated by reference to Exhibit 10.1 to the Company's Form 10-Q, filed with the Commission on August 1, 2018.

(30)

Incorporated by reference to Exhibit 4.2 to the Company's Form 10-K, filed with the Commission on February 26, 2020.

(31) Incorporated by reference to Exhibit 99.2 to the Company's Form 8-K, filed with the Commission on August 2, 2019.
(32) Incorporated by reference to Exhibit 10.1 to the Company's Form 8-K, filed with the Commission on February 4, 2021.
(33)

Incorporated by reference to Exhibit 10.2 to the Company's Form 8-K, filed with the Commission on February 4, 2021.

   

#

Indicates management contract or compensatory plan or arrangement.

 

 

*

The certifications furnished in Exhibit 32.1 hereto are deemed to accompany this Annual Report on Form 10-K and will not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended. Such certifications will not be deemed to be incorporated by reference into any filings under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, except to the extent that the registrant specifically incorporates it by reference.

 

 

**

Users of this data are advised that, pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability under these sections.

 

 

SIGNATURE

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

Proto Labs, Inc.

 

 

 

 

 

Date: February 18, 2022

 

/s/ Robert Bodor

 

 

 

Robert Bodor

 

 

 

President and Chief Executive Officer

(Principal Executive Officer)

 

 

 

 

 

Date: February 18, 2022

 

/s/ Daniel Schumacher

 

 

 

Daniel Schumacher

 

 

 

Interim Chief Financial Officer

(Principal Financial and Accounting Officer)

 

 

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant in the capacities and on the dates indicated.

 

Date: February 18, 2022

 

/s/ Robert Bodor

 

 

 

Robert Bodor

 

 

 

President and Chief Executive Officer and Director

(Principal Executive Officer)

 

 

 

 

 

Date: February 18, 2022

 

/s/ Daniel Schumacher

 

 

  Daniel Schumacher

 

 

 

Interim Chief Financial Officer

(Principal Financial and Accounting Officer)

 

 

Chairman of the Board of Directors:

Archie C. Black*

 

Directors:

Sujeet Chand*

Moonhie Chin*

Rainer Gawlick*

John B. Goodman*

Stacy Greiner*

Donald G. Krantz*

Sven A. Wehrwein*

 

 

*Robert Bodor, by signing his name hereto, does hereby sign this document on behalf of each of the above named officers and directors of the registrant pursuant to powers of attorney duly executed by such persons and filed as an exhibit hereto.

 

Date: February 18, 2022

 

/s/ Robert Bodor

 

 

 

Robert Bodor

 

 

 

President and Chief Executive Officer

(Principal Executive Officer)

 

 

86