REPLIGEN CORP - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2021

OR

For the transition period from to

Commission File Number 000-14656

REPLIGEN CORPORATION

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (781) 250-0111

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐.

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒.

Indicate by checkmark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐.

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. Yes ☐ No ☐.

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒.

The aggregate market value of the voting and non-voting common equity held by non-affiliates as of June 30, 2021, the last business day of the registrant’s most recently completed second fiscal quarter, was $10,858,031,196.

The number of shares of the registrant’s common stock outstanding as of February 14, 2022 was 55,327,475.

Table of Contents

Summary of the Material Risks Associated with Our Business

Our business is subject to numerous risks and uncertainties that you should be aware of in evaluating our business. These risks include, but are not limited to, the following:

i

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K (“Form 10-K”) contains forward-looking statements which are made pursuant to the safe harbor provisions of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). The forward-looking statements in this Form 10-K do not constitute guarantees of future performance. Investors are cautioned that express or implied statements in this Form 10-K that are not strictly historical statements, including, without limitation, statements regarding current or future financial performance, potential impairment of future earnings, management’s strategy, plans and objectives for future operations or acquisitions, product development and sales, research and development, selling, general and administrative expenditures, intellectual property and adequacy of capital resources and financing plans constitute forward-looking statements. Such forward-looking statements are subject to a number of risks and uncertainties that could cause actual results to differ materially from those anticipated, including, without limitation, the risks identified under the caption “Risk Factors” and other risks detailed in this Form 10-K and our other filings with the Securities and Exchange Commission. We assume no obligation to update any forward-looking information contained in this Form 10-K, except as required by law.

1

PART I

ITEM 1. BUSINESS

The following discussion of our business contains forward-looking statements that involve risks and uncertainties. When used in this report, the words “intend,” “anticipate,” “believe,” “estimate,” “plan” and “expect” and similar expressions as they relate to us are included to identify forward-looking statements. Our actual results could differ materially from those anticipated in these forward-looking statements and are a result of certain factors, including those set forth under “Risk Factors” and elsewhere in this Annual Report on Form 10-K (“Form 10-K”).

References throughout this Form 10-K to “Repligen Corporation”, “Repligen”, “we”, “us”, “our”, or the “Company” refer to Repligen Corporation and its subsidiaries, taken as a whole, unless the context otherwise indicates.

Overview

Repligen Corporation is a global life sciences company that develops and commercializes highly innovative bioprocessing technologies and systems that increase efficiencies and flexibility in the process of manufacturing biological drugs.

As the overall market for biologics continues to grow and expand, our primary customers – global biopharmaceutical companies and contract development and manufacturing organizations – face critical production cost, capacity, quality and time pressures. Built to address these concerns, our products help set new standards for the way biologics are manufactured. We are committed to inspiring advances in bioprocessing as a trusted partner in the production of critical biologic drugs – including monoclonal antibodies (“mAbs”), recombinant proteins, vaccines and cell and gene therapies (“C&GT”) – that are improving human health worldwide.

We currently operate as one bioprocessing business, with a comprehensive suite of products to serve both upstream and downstream processes in biological drug manufacturing. Building on over 40 years of industry expertise, we have developed a broad and diversified product portfolio that reflects our passion for innovation and the customer-first culture that drives our entire organization. We continue to capitalize on opportunities to maximize the value of our product platform through both organic growth initiatives (internal innovation and commercial leverage) and targeted acquisitions.

Our corporate headquarters are located in Waltham, Massachusetts, with additional administrative and manufacturing operations worldwide. The majority of our 16 key manufacturing sites are located in the United States (California, Massachusetts, New Jersey and New York). Outside the United States, we have sites in Estonia, France, Germany, Ireland, the Netherlands and Sweden.

COVID-19 Considerations and Responses

In March 2020, the World Health Organization declared the COVID-19 outbreak, including all ensuing variants thereto, to be a pandemic (“COVID-19”). COVID-19 has resulted in government authorities around the world implementing numerous unprecedented measures such as travel restrictions, quarantines, shelter in place orders, factory shutdowns and vaccine mandates. During 2021 and 2020, our revenues were positively affected by COVID-19. However, the extent to which COVID-19 will continue to affect our future financial results and operations will depend on future developments, which are highly uncertain and cannot be predicted, including the recurrence, severity and/or duration of COVID-19, and current or future domestic and international actions to contain and treat COVID-19.

With the health and safety of our employees as a top priority, we promptly created a COVID-19 task force in March 2020 focused on the Company’s response to COVID-19, which quickly established on-site COVID-19 testing, on-site restrictions and protocols, employee communications, vaccine awareness and education and remote workforce management; in addition, many of our employees continued working remotely for extended periods of time during 2021 and 2020. We are following public and private sector policies and initiatives to reduce the transmission of COVID-19, such as the imposition of travel restrictions and the promotion of social distancing and continuing our work-from-home arrangements. We are taking a variety of measures to ensure the availability and functioning of our critical infrastructure, to promote the safety and security of our employees and to support the communities in which we operate. These measures include increasing our inventory, requiring remote working arrangements for employees who are not integral to physically making and shipping our products or who do not need specialized equipment to perform their work, restricting on-site visits by non-employees and investing in personal protective equipment. During 2021 and 2020, on-site testing was conducted

2

at all U.S. sites and offered as an option at sites outside the United States. Daily temperature screenings were available at most U.S. and non-U.S. sites and all employees were encouraged to receive the COVID-19 vaccinations and COVID-19 booster shots as they became available. As COVID-19 conditions improved, we began implementing a phased reopening process which we have since reversed in response to the identification of COVID-19 variants. We will continue to prioritize the health and safety of our employees until COVID-19 is contained. We may take further actions and adjust our reopening process as government authorities require or recommend or as we determine to be in the best interests of our employees, customers, partners and suppliers.

For further discussion of the risks relating to COVID-19, see “The COVID-19 pandemic, or similar public health crises, could have a material adverse impact on our business, financial condition and results of operations, including our product sales, and our stock price” in Item 1A. “Risk Factors,” below.

Our Products

Our bioprocessing business is comprised of four main franchises: filtration; chromatography; process analytics; and proteins.

Since 2012, we have purposely built a highly diversified portfolio of products offered under these franchises, developing technological solutions that enable more efficient drug manufacturing processes for our customers, through internal research and development (“R&D”) and strategic acquisitions. We are committed to sustainable innovation and have introduced disruptive new products in response to our customers’ bioprocessing challenges. Our growth strategy continues to expand our geographic scope, our customer base and applications of our technologies.

To support our sales growth goals for these products, we make ongoing investments in our commercial organization, our R&D team and our manufacturing capacity. We regularly evaluate and invest in these areas as needed to ensure timely deliveries and to stay ahead of increased customer demand for our products.

A majority of our revenue is derived from consumable and/or single-campaign (“single-use”) product sales, as compared to associated equipment. The customization, scalability and plug-and-play convenience of these products, and in many cases the closed nature of our technologies, make them ideal for use in biologics manufacturing processes where contamination risk is a critical concern of our customers.

Filtration

Filtration is our largest franchise with the broadest product offering covering upstream and downstream technologies. Below is a description of some of our key products:

XCell ATF® Cell Retention Systems

Our filtration products offer a number of advantages to manufacturers of biologic drugs and are used in process development and process scale (clinical and commercial) production. Our XCell Alternating Tangential Flow (“ATF”) systems are used in upstream perfusion (continuous) and N-1 (intensified fed-batch or hybrid perfusion) cell culture processing.

XCell ATF is a cell retention technology. The system is comprised of an advanced hollow fiber (“HF”) filtration device, a low shear pump and a controller. The XCell ATF system is connected to a bioreactor and enables the cell culture to be run continuously, with cells being retained in the bioreactor, fresh nutrients (cell culture media) being fed into the reactor continuously and clarified biological product and cell waste being removed (harvested) continuously. The cells are maintained in a consistent nutrient-rich environment and can reach cell densities two- and three-times higher than those achieved by standard fed-batch culture. As a result, product yield is increased, which improves facility utilization and can reduce the size of a bioreactor required to manufacture a given volume of biologic drug product. XCell ATF systems are available in a wide range of sizes that can easily scale from laboratory use through full production with bioreactors as large as 5,000 liters.

Through internal innovation, we developed and launched single-use formats of the original stainless steel XCell ATF devices to address increasing industry demand for single-use sterile systems with “plug-and-play” technology. The XCell ATF device is now available to customers in both its original configuration (steel housing and single-use filters) in all sizes (2, 4, 6 and 10), and/or as a single-use device (disposable housing/filter combination) in most sizes (2, 6, and 10). The availability of XCell ATF technology in a

3

single-use format reduces implementation time by eliminating the time intensive workflow associated with autoclaving and enables our customers to accelerate evaluations of the product with a lower initial overall cost of ownership.

TangenX® Flat Sheet Cassettes

Our TangenX product line (“TangenX”) balances our upstream XCell ATF systems (HF) with a portfolio of flat-sheet tangential flow filtration (“TFF”) cassettes used in downstream biologic drug concentration and formulation processes. The TangenX product portfolio includes our single-use SIUS® brand, providing customers with a high-performance, cost saving alternative to reusable TFF cassettes.

TFF is a rapid and efficient method for the concentration and formulation of biomolecules that is widely used in many applications in biopharmaceutical development and manufacturing. SIUS cassettes feature a high performing membrane and unique cartridge construction that enables a lower price point. Each disposable cassette is delivered pre-sanitized and ready to be equilibrated and used for tangential flow, ultrafiltration and diafiltration applications. Use of SIUS TFF cassettes eliminates non-value-added steps (cleaning, testing between uses, storage and flushing) that are required with reusable TFF products, providing cost and time savings. The cassettes are interchangeable with filter hardware from multiple manufacturers, simplifying customer trial and adoption of SIUS products.

In 2020, we introduced SIUS Gamma, which we engineered to harness the performance and efficiencies of TangenX® SIUS® membranes and cassettes, while also providing the convenience of a fully assembled, closed and irradiated system. The device is delivered as a package including the cassette, manifold, clamps, tubing and connectors. The customizable SIUS Gamma device is ideal for adenovirus cell and gene therapy ("C&GT") processes where large volumes need to be concentrated prior to chromatography.

Spectrum® Hollow Fibers

Our filtration business is strengthened by a leading portfolio of Spectrum HF filtration solutions, including fully integrated KrosFlo® TFF® systems with Konduit sensing and ProConnex® Flow Path single-use assemblies. The KrosFlo family of TFF systems for product concentration is fully scalable from 2 milliliters to 5,000 liters – from lab-scale to commercial manufacturing. Designed for purification and formulation applications, KrosFlo systems enable robust downstream ultrafiltration and microfiltration.

We also gained the Spectra/Por® portfolio of laboratory and process dialysis products and in 2019, we launched the SpectraFlo™ Dynamic Dialysis Systems. Also, in 2019 we introduced the KrosFlo® TFDF® (Tangential Flow Depth Filtration) systems, which we believe have the potential to disrupt and displace traditional harvest clarification operations. The KrosFlo TFDF system includes control hardware, novel high throughput tubular depth filters and ProConnex® TFDF® flow paths. When used for cell culture clarification, single-use KrosFlo TFDF technology delivers unprecedented high flux (>1,000 LMH), high capacity, low turbidity, and minimal dilution, making the technology a high-performance alternative to traditional centrifugation and depth filtration approaches to harvest clarification. TFDF technology also provides benefits such as low hold-up volume, high recovery, small footprint, simple set up and disposal, scalability and reduced process time.

The Spectrum product line of HF filters is used in bench-tops through commercial-scale processes, primarily for the filtration, purification and concentration of biologics and diagnostic products. Our KrosFlo filtration systems and equipment offer both standard and customized solutions to bioprocessing customers, with particular strength in consumable and single-use offerings.

With our acquisition of Polymem S.A. (“Polymem”) on July 1, 2021, we further expanded our HF membrane and module production capabilities and added core R&D, engineering and production expertise in HF technology for both industrial and bioprocessing markets. The Polymem business complements our Spectrum HF product line, which includes KrosFlo TFF systems and ProConnex fluid management. The acquisition of Polymem accelerates our HF manufacturing buildout and adds a Europe-based HF manufacturing center of excellence.

The growth of our filtration business has allowed us to substantially increase our direct sales presence in Europe and Asia and diversify our end markets to include all biologic classes, including mAb, vaccines, recombinant proteins and C&GT.

4

Other Filtration

Over time, we have broadened the application of our Konduit monitor, which automates concentration and buffer exchange, to include use with both HF TFF systems. We also self-manufacture HF filters that are used in our XCell ATF, KrosFlo TFF and KrosFlo TFDF systems.

With our acquisition of Engineered Molding Technology LLC (“EMT”) on July 13, 2020, we added EMT’s silicone-based, single-use components and manifolds to our filtration franchise. These fluid management products are key components in single-use filtration and chromatography systems and will help expand our line of single-use ProConnex flow paths, streamline our supply chain for ATF and provide more flexibility as we scale and expand our single-use and systems portfolios.

With our acquisition of Non-Metallic Solutions, Inc., a Massachusetts corporation ("NMS") on October 20, 2020, we expanded our line of single-use systems and associated integrated flow path assemblies, streamlining our supply chain for current products, and giving us more flexibility to scale and expand single-use and systems portfolios.

With our acquisition of the ARTeSYN Biosolutions Holdings Ireland Limited (“ARTeSYN”) business on December 3, 2020, we expanded our filtration offering, and added additional single-use components and flow path assemblies for fluid management, providing greater flexibility and market opportunity as we scale and expand our systems portfolio.

With our acquisition of BioFlex Solutions LLC (“BioFlex”) and Newton T&M Corp. (“NTM”) on December 16, 2021, we complemented and expanded our filtration franchise, as both BioFlex and NTM focus on single-use fluid management components, including single-use clamps, adapters, end caps and hose assemblies. These products are essential components in our upstream and downstream product offerings – especially our systems with line-sets and flow paths. These acquisitions streamline and increase our control over many components in our single-use supply chain, which ultimately should drive reduced lead-times for our customers in the coming years.

Chromatography

Our chromatography franchise includes a number of products used in downstream purification, development, manufacturing and quality control of biological drugs. The main driver of growth in this portfolio is our OPUS® pre-packed column (“PPC”) product line.

In addition to OPUS, with our acquisition of ARTeSYN in 2020, we added chromatography systems to our offerings, as well as single-use components and flow path assemblies for fluid management, providing greater flexibility and market opportunity as we scale and expand our systems portfolio.

Additional chromatography products include our affinity capture resins, such as CaptivA® Protein A resins, that are used in a small number of commercial drug processes and our ELISA test kits, used by quality control departments to detect and measure the presence of leached Protein A and/or growth factor in the final product.

OPUS Pre-Packed Columns

Our chromatography franchise features a wide range of OPUS columns, which we deliver to our customers sealed and pre-packed with their choice of resin. These are single-use or campaign-use disposable columns that replace the use of customer-packed glass columns for downstream purification. By designing OPUS columns to be a technologically advanced and flexible option for the purification of biologics from process development through clinical and commercial-scale manufacturing, Repligen has become a leader in the PPC market. Our biomanufacturing customers value the significant cost savings that OPUS columns can deliver by reducing set up time, labor, equipment and facility costs – in addition to delivering product consistency and “plug-and-play” convenience.

We launched our first production scale OPUS columns in 2012 and have since added larger diameter options that scale up to use with 2,000 liter bioreactors. Our OPUS 80R column is the largest available PPC on the market for use in late-stage clinical or commercial purification processes. We offer unique features such as a resin recovery port on our larger columns, which allows our customers to remove and reuse the recovered resin in other applications. We believe the OPUS 5-80R product line is the most flexible product line

5

available in the market, serving the purification needs of customers manufacturing mAbs and other biologics such as vaccines and C&GT.

In addition to our larger scale OPUS columns, our portfolio includes our smaller-scale OPUS columns, including our RoboColumn®, MiniChrom® and ValiChrom® columns used for process development (“PD”) and validation. These columns are used in high-throughput PD screening, viral clearance validation studies and scale down validation of chromatography processes.

We maintain customer-facing centers in both the United States and Europe for our OPUS column customers, and offer a premier ability to pack any of hundreds of chromatography capture resins available, as per our customers’ choice.

Process Analytics

Our process analytics products complement and support our filtration, chromatography and proteins franchises as they allow end-users to make at-line or in-line absorbance measurements allowing for the determination of protein concentration in filtration, chromatography formulation and fill-finish applications.

SoloVPE® Device

Our SoloVPE slope spectroscopy system is the industry standard for offline and at-line absorbance measurements for protein concentration determination in process development, manufacturing and quality control settings.

FlowVPE® Device

Our FlowVPE slope spectroscopy system enhances the power of slope spectroscopy and provides in-line protein concentration measurement for filtration, chromatography and fill-finish applications. A key benefit of this in-line solution is the ability to monitor a manufacturing process in real time.

FlowVPX® System

FlowVPX® slope spectroscopy system is our next-generation FlowVPE launched at the beginning of 2021 and designed to meet the rigors of regulatory GMP requirements. FlowVPX offers reliable real-time results with integrated ease for concentration measurements during every stage of the downstream GMP-compliant production-scale biologics manufacturing.

Use of slope spectroscopy systems delivers multiple process benefits for our biopharmaceutical manufacturing customers, compared to traditional UV-Vis approaches. Key benefits include: the elimination of manual dilutions and sample transfers from process development/manufacturing to labs, rapid time to results (minutes versus hours), improved precision, built-in data quality for improved reporting and validation, and ease of use.

Proteins

Our proteins franchise is represented by our Protein A affinity ligands, which are a critical component of Protein A chromatography resins used in downstream purification of virtually all mAb-based drugs on the market or in development, and cell culture growth factor products, which are a key component of cell culture media used in upstream bioprocessing to increase cell density and improve product yield.

Affinity Ligands

We are a leading provider of Protein A affinity ligands to life sciences companies. Protein A ligands are an essential “binding” component of Protein A affinity chromatography resins used in the purification of virtually all mAb-based drugs on the market or in development. We manufacture multiple forms of Protein A ligands under long-term supply agreements with major life sciences companies including Cytiva, MilliporeSigma and Purolite, an Ecolab Inc. company ("Purolite"), who in turn sell their Protein A chromatography resins to end users (mAb manufacturers). We have two manufacturing sites supporting overall global demand for our Protein A ligands: one in Lund, Sweden and another in Waltham, Massachusetts.

Protein A chromatography resins are considered the industry standard for purification of antibody-based therapeutics due to the ability of the Protein A ligand to very selectively bind to or “capture” antibodies from crude protein mixtures. Protein A resins are packed

6

into the first chromatography column of typically three columns used in a mAb purification process. As a result of Protein A’s high affinity for antibodies, the mAb product is highly purified and concentrated within this first capture step before moving to polishing steps.

In June 2018, we entered into an agreement with Navigo Proteins GmbH (“Navigo”) for the exclusive co-development of multiple affinity ligands for which Repligen holds commercialization rights. We manufacture and exclusively supply the first of these ligands, NGL-Impact® A, to Purolite, for use in their Jetted A50 Protein A resin product. We have a long-term supply agreement with Purolite for NGL-Impact and potential additional affinity ligands that may advance from our Navigo collaboration.

In October 2020, we announced the successful development (with Navigo) of a spike protein ligand, and our plans to manufacture and commercialize the associated chromatography resin as a Repligen branded and marketed product. We subsequently announced the launch of our NGL COVID-19 Spike Protein affinity resin in February 2021. The resin, which targets the SARS-CoV-2 spike protein, can be utilized in the purification of certain COVID-19 vaccines. The spike protein is a characterizing feature of SARS-CoV-2, the virus that causes COVID-19; it is the primary antigen being evaluated in clinical trials to induce an immune response as a COVID-19 vaccine.

In September 2021, the Company and Navigo successfully completed co-development of a novel affinity ligand that addresses aggregation issues associated with pH sensitive antibodies and Fc-fusion proteins. We are manufacturing and supplying this ligand, NGL-Impact® HipH, to Purolite.

Also, in September 2021, we completed our strategic acquisition of Avitide, Inc. (“Avitide”), a market leader in affinity ligand discovery and development. This acquisition is a major step forward in building our proteins franchise, and moves Repligen into affinity resin solutions for C&GT and other emerging modalities. This acquisition builds off the excellent partnership with Navigo mentioned above, and strengthens and expands our ligand discovery platform.

Growth Factors

Most biopharmaceuticals are produced through an upstream mammalian cell culture process. In order to stimulate increased cell growth and maximize overall yield from a bioreactor, manufacturers often add growth factors, such as insulin, to their cell culture media. Our cell culture growth factor additives include LONG® R3 IGF 1, our insulin-like growth factor that has been shown to be up to 100 times more biologically potent than insulin (the industry standard), thereby increasing recombinant protein production in cell culture fermentation applications.

Corporate Information

We are a Delaware corporation with our global headquarters in Waltham, Massachusetts. We were incorporated in 1981 and became a publicly traded company in 1986. Our common stock is listed on the Nasdaq Global Market under the symbol “RGEN”. We have over 1,800 employees and operate globally with offices and manufacturing sites located at multiple locations in the United States, Europe and Asia. Our principal executive offices are located at 41 Seyon Street, Waltham, Massachusetts 02453, our website is www.repligen.com and our telephone number is (781) 250-0111.

2021 Acquisitions

BioFlex Solutions LLC and Newton T&M Corp.

On November 29, 2021, the Company entered into an Equity Purchase Agreement with BioFlex, NTM and each of Ralph Meola and Jason Nisler, to acquire 100% of the outstanding securities of BioFlex and NTM (collectively, the “NTM Acquisition”). The NTM acquisition closed on December 16, 2021.

NTM, which is headquartered in Newton, New Jersey, is the parent company of BioFlex and focuses on manufacturing of products, while BioFlex, also headquartered in Newton, New Jersey, commercializes branded products to biotechnology companies. The NTM Acquisition is a strong fit with the Company’s fluid management portfolio of products as the industry migrates to single-use flow paths solutions for mAb, vaccine and C&GT applications, with a focus on single-use fluid management components, including single-use clamps, adapters, end caps and hose assemblies. The NTM Acquisition streamlines and increases our control over many

7

components in our single-use supply chain which ultimately should drive reduced lead-times for Repligen customers in the coming years.

Avitide, Inc.

On September 16, 2021, the Company entered into an Agreement and Plan of Merger and Reorganization (“Avitide Merger Agreement”) with Avalon Merger Sub, Inc., a Delaware corporation and a wholly owned direct subsidiary of the Company, Avalon Merger Sub LLC, a Delaware limited liability company and a wholly owned direct subsidiary of the Company, Avitide, and Shareholder Representative Services LLC, a Colorado limited liability company, solely in its capacity as the representative, agent and attorney-in-fact of Avitide's securityholders to purchase Avitide for $150.0 million in upfront consideration, comprised of cash and our common stock, and up to an additional $125.0 million (undiscounted) in contingent consideration for performance-based earnout payments over the next three years. The transaction closed on September 20, 2021.

Avitide, which is headquartered in Lebanon, New Hampshire, offers diverse libraries and leading technology in affinity ligand discovery and development resulting in best-in-class ligand discovery and development lead-times. The acquisition gives the Company a new platform for affinity resin development, including C&GT, and advances and expands the Company’s proteins and chromatography franchise to address the unique purification needs of gene therapies and other emerging modalities.

Polymem S.A.

On June 22, 2021, the Company entered into a Stock Purchase Agreement with Polymem, a company organized under the laws of France, and Jean-Michel Espenan and Franc Saux, acting together jointly and severally as the representatives of the sellers pursuant to which we acquired all of the outstanding common stock of Polymem for approximately $47 million in cash. The transaction closed on July 1, 2021.

Polymem, which is headquartered outside of Toulouse, France, is a manufacturer of HF membranes, membrane modules and systems for industrial and bioprocessing applications. Polymem products will complement and expand the Company’s portfolio of HF systems and consumables. This acquisition substantially also increases the Company’s membrane and module manufacturing capacity and establishes a world-class center of excellence in Europe to address the accelerating global demand for these innovative products.

2020 Acquisitions

ARTeSYN Biosolutions Holdings Ireland Limited

On October 27, 2020, we entered into an Equity and Asset Purchase Agreement with ARTeSYN, a company organized under the laws of Ireland, Third Creek Holdings, LLC, a Nevada limited liability company, Alphinity, LLC, a Nevada limited liability company (“Alphinity”, and together with Third Creek Holdings, LLC the “ARTeSYN Sellers”), and Michael Gagne, solely in his capacity as the representative of the ARTeSYN Sellers, pursuant to which we acquired (i) all of the outstanding equity securities of ARTeSYN and (ii) certain assets from Alphinity related to the business of ARTeSYN (collectively, the “ARTeSYN Acquisition”) for approximately $200 million in cash and the Company's common stock. The transaction closed on December 3, 2020.

ARTeSYN, which is headquartered in Waterford, Ireland, conducts its operations in Ireland, the United States and Estonia. Its suite of single-use solutions has been developed with the goal of enabling “abundance in medicine” by allowing greater efficiency in biologics manufacturing. The ARTeSYN team has created a number of solutions targeting the single-use space from single-use valves with fully disposable valve liners, XO® skeletal supports, a hybrid small parts offering for de-bottlenecking traditional facilities, to fully automated SU process systems that have quickly become leading solutions in the bioprocessing industry. ARTeSYN has established downstream processing leadership with its portfolio of state of the art single-use systems for chromatography, filtration, continuous manufacturing and media/buffer prep workflows. In addition, the Company has integrated unique flow path assemblies utilizing the Company’s silicone extrusion and molding technology, to deliver highly differentiated, low hold-up volume systems that minimize

8

product loss during processing. The ARTeSYN portfolio expands on the market success of the Company’s HF systems and complements its chromatography and TFF filtration product lines.

Non-Metallic Solutions, Inc.

On October 15, 2020, we entered into a Stock Purchase Agreement with NMS, and each of William Malloneé and Derek Masser, the legal and beneficial owners of NMS, to purchase NMS, which transaction subsequently closed on October 20, 2020.

NMS, which is headquartered in Auburn, Massachusetts, is a manufacturer of fabricated plastics, custom containers, and related assemblies and components used in the manufacturing of biologic drugs. NMS’s fluid management products complement and expand Repligen’s single-use product offerings. Effective December 31, 2021, NMS was absorbed into the Company by way of “short-form” merger pursuant to Massachusetts and Delaware law, which did not require a vote of the Company’s shareholders.

Engineered Molding Technology LLC

On June 26, 2020, we entered into a Membership Interest Purchase Agreement with EMT and each of Michael Pandori and Todd Etesse, the legal and beneficial owners of EMT to purchase EMT, which transaction subsequently closed on July 13, 2020.

EMT, which is headquartered in Clifton Park, New York, is an innovator and manufacturer of single-use silicone assemblies and components used in the manufacturing of biologic drugs. EMT’s standard and custom molded and over-molded connectors and silicone tubing products are key fluid management components in single-use filtration and chromatography systems. EMT’s products complement and expand our single-use product offerings. Effective July 11, 2021, EMT was absorbed into the Company by way of “short-form” merger pursuant to New York and Delaware law, which did not require a vote of the Company’s shareholders .

2019 Acquisition

C Technologies, Inc.

On May 31, 2019, we acquired C Technologies Inc. (“C Technologies”), pursuant to the terms of a Stock Purchase Agreement, by and among Repligen, C Technologies and Craig Harrison, an individual and sole stockholder of C Technologies (such acquisition, the “C Technologies Acquisition”).

C Technologies sells instruments, consumables and accessories that are designed to allow bioprocessing technicians to measure the protein concentration of a liquid sample using C Technologies’ slope spectroscopy method, which eliminates the need for manual sample dilution.

The previous C Technologies Acquisition, combined with the 2021 acquisitions of Polymem, Avitide, BioFlex and NTM and the 2020 acquisitions of ARTeSYN, NMS and EMT, further establishes us as a key player in bioprocessing systems and associated integrated single-use systems and associated integrated flow path assemblies. For more information on these acquisitions, see Note 4, “Acquisitions,” to our consolidated financial statements included in Part II, Item 8 of this report.

Our Market Opportunity

Bioprocessing Addressable Market

The global addressable market for bioprocessing products is estimated to be over $22 billion of which we estimate Repligen’s addressable market to be approximately $8.1 billion at year end 2021. This market includes products used to manufacture therapeutic antibodies, recombinant proteins and vaccines, as well as C&GT.

Monoclonal Antibody Market

Antibody-based biologics alone accounted for over $130 billion of global biopharma revenue in 2020. Industry sources project the mAbs market to grow in the range of approximately 10% to 12% annually through 2025, driven by new approvals and expanded clinical uses for marketed antibodies, as well as the emergence of biosimilar versions of originator mAbs. As of December 31, 2021, over 120 mAbs were approved by the U.S. Food and Drug Administration (“FDA”) to treat a diverse range of diseases. R&D remains robust, with more than 800 mAb clinical trials ongoing to address a wide range of medical conditions.

9

In addition to investments in the discovery and development of novel biologic drugs, there has been substantial investment in follow-on products (biosimilars) by generic and specialty pharmaceutical as well as large biopharmaceutical companies. Development of follow-on products accelerated as the first major mAbs came off patent in the European Union and United States. Due to the high cost of biologic drugs, many countries in developing and emerging markets have been aggressively investing in biomanufacturing capabilities to supply lower cost biosimilars for the local markets. For both originator and follow-on biologics manufacturing, Repligen products are well-positioned to enable greater manufacturing flexibility, production yields and lower costs through improved process efficiencies.

Cell and Gene Therapy Market

C&GT has emerged in the past few years to become a rapidly growing area of biological drug development, with over 1,200 clinical trials underway at year-end 2020 according to industry sources. Statements by the FDA are supported by industry reports that estimate annual revenue growth of over 25% for the C&GT market through 2025. This scientifically advanced therapeutic approach has unique manufacturing challenges that many of our products can help address. We believe we are well positioned to participate in C&GT production, particularly in the manufacture of plasmids and viral vectors.

Our Strategy

We are focused on the development, production and commercialization of highly differentiated, technology-leading systems and solutions that address specific pressure points in the biologics manufacturing process and deliver substantial value to our customers. Our products are designed to optimize our customers’ workflow to maximize productivity and we are committed to supporting our customers with strong customer service and applications expertise.

We intend to build on our recent history of developing market-leading solutions and delivering strong financial performance through the following strategies:

10

Research and Development

Our research activities are focused on developing new high-value bioprocessing products across all of our franchises. We strive to continue to introduce truly differentiated products that address specific pain points in the biologics manufacturing process. Our commitment to innovation is core to the Repligen culture and our success as a company.

Sales and Marketing

Our sales and marketing strategy supports our objective of strengthening our position as a leading provider of products and services, addressing upstream, downstream and quality control needs of bioprocessing customers in the biopharmaceutical industry.

Our Commercial Team

To support our sales goals for our direct-to-consumer products, we have invested in our commercial organization. Since 2014, we have significantly expanded our global commercial organization from less than 10, to a commercial team of 309 employees as of December 31, 2021. This includes 211 people in field positions (sales, field applications and field service), and 98 people in internal positions (marketing, customer service and product management). Geographically, 182 members of our commercial team are located in North America, 65 in Europe and 62 in Asia-Pacific ("APAC") regions.

Our bioprocess account managers are supported in each region by bioprocess sales specialists with expertise in filtration, chromatography or process analytics, and by technically trained field applications specialists and field service providers, who can work closely with customers on product demonstrations, implementation and support. We believe that this model helps drive further adoption at our key accounts and also open up new sales opportunities within each region.

Ligand Supply Agreements

For our proteins franchise, we are committed to be a partner of choice for our customers with distributor and supply agreements in place with large life sciences companies such as Cytiva, MilliporeSigma and Purolite. The Cytiva Protein A supply agreement relating to our Waltham, Massachusetts facility was amended in September 2021 and pursuant to its amended terms, runs through 2025. Cytiva moved a portion of its ligand manufacturing in-house in 2020 and under the terms of our existing long-term supply agreements, Cytiva has the ability to move additional manufacturing in house in 2022. Our Protein A supply agreement with MilliporeSigma runs, pursuant to its terms, through 2023, and in 2018 we amended our Protein A supply agreement with Purolite that runs, pursuant to its amended terms, to August 2026 with an option for renewal through 2028. Our dual manufacturing capability provides strong business continuity and reduces overall supply risk for our ligand customers.

Significant Customers and Geographic Reporting

Customers for our bioprocessing products include major life sciences companies, contract manufacturing organizations, biopharmaceutical companies, diagnostics companies and laboratory researchers.

The following table represents the Company’s total revenue by geographic area (based on the location of the customer):

Revenue from Pfizer Inc. accounted for 10% of total revenue for the year ended December 31, 2021 and they were the only customer accounting for 10% or more of our 2021 total revenue. MilliporeSigma accounted for 11% and 13% of total revenues in the years ended December 31, 2020 and 2019, respectively. Another customer, Cytiva, accounted for 12% of total revenues in the year ended December 31, 2019.

11

Human Capital

Employees

Repligen performs in a highly competitive industry and recognizes that our continued success hinges upon our ability to attract, develop and retain a diverse team of talented individuals. We place high value on the satisfaction and well-being of our employees, and operate with fair labor standards and industry-competitive compensation and benefits globally. As of December 31, 2021, we employed 1,852 full-time and part-time employees, an increase of 724 since December 31, 2020. This total includes 309 employees in our commercial organization (211 field and 98 internal), 169 in engineering and R&D, 874 in manufacturing, 179 in quality, 110 in supply chain roles and 211 in administrative functions. Each of our employees has signed a confidentiality agreement. None of our U.S. employees are covered by collective bargaining agreements. We have one collective bargaining agreement with two unions that covers our 102 employees in Sweden, comprising approximately 6% of our total workforce. We renewed this collective bargaining agreement in November 2020, and it expires at the end of March 2023. In France, 81 employees are under the relevant national and local collective bargaining agreements for metallurgy, comprising approximately 4% of our total workforce.

Code of Business Conduct and Ethics

Repligen is committed to conducting business in accordance with the highest ethical standards. This means how we conduct ourselves and our global work is more than just a matter of policy and law; it’s a reflection of our core principles. Our Second Amended and Restated Code of Business Conduct and Ethics reflects Repligen’s five core principles – (1) trustworthiness, (2) respectfulness, (3) responsibility, (4) fairness and (5) corporate citizenship. Our Second Amended and Restated Code of Business Conduct and Ethics applies to all Repligen employees, including those who are integrated into the Company through acquisitions.

Diversity, Equity and Inclusion

Repligen supports the values of diversity, equity and inclusion (“DE&I”), reflecting our resolute commitment to a diverse, equitable and inclusive workplace. We have established talent acquisition processes, as well as training and employee engagement resources, including the formation of a DE&I council, to drive the promotion of diversity and inclusion at all levels of our organization.

Employee Engagement

We regularly conduct engagement surveys to gain insight on employee perspectives. Additional channels for employee engagement include CEO-led town halls and Company-wide all-hands meetings.

Health, Safety and Well-Being

We actively promote the safety, health and well-being of our employees and end users of our products. Our environmental health and safety policy advances our vision of zero workplace incidents and our efforts to reduce our environmental impacts.

Repligen has continued to focus on employee safety throughout COVID-19 by implementing extensive safety measures, including without limitation on-site COVID-19 testing protocols, detailed contact-tracing if COVID-19 positive cases are detected and flexible remote working options for many of our employees. See the section entitled, “COVID-19 Considerations and Responses” above for more information on the Company’s response to COVID-19.

Intellectual Property

We are committed to protecting our intellectual property through a combination of patents, trade secrets and trademarks, as well as confidentiality and material transfer agreements. As further described below, we own or have exclusive rights to 203 issued patents and 289 pending patent applications in the United States and other foreign jurisdictions including Australia, Canada, China, France, Germany, India, Japan, South Korea, Sweden and the United Kingdom.

Our policy is to require each of our employees, consultants, business partners, potential collaborators and major customers to execute confidentiality agreements upon the commencement of an employment, consulting, business relationship, or product related audit or research evaluation. These agreements provide that all confidential information developed or made known to the other party during the course of the relationship with us is to be kept confidential and not disclosed to third parties except in specific circumstances. In the case of employees and consultants, the agreements generally provide that all inventions conceived by the individual in the course of rendering services to Repligen shall be our exclusive property and must be assigned to Repligen.

12

Filtration

For our filtration franchise, we are focusing on ATF, TFDF and TFF HF and flat sheet systems, membranes, filters, flow paths and single-use technologies. We continually seek to improve upon these technologies and have multiple new patent filings including patents covering next generation TFDF filters and ATF technology.

Chromatography

Our issued patents cover certain unique methods and features of our OPUS PPC, including methods of manufacturing column components, as well as packing and testing chromatography columns. We strive to improve upon this technology, including developing potentially disruptive technology related to gamma irradiated columns, resin packing methods, and methods of removing air using specialized tubing and valve systems.

Through the ARTeSYN Acquisition, our patent portfolio includes Exo-Technology, valves, integrated sensors and integrated flow path systems. We also have protection on our single-use replacement valves and liners used in combination with our modular configurable encapsulated flow systems to provide sterilized flow paths for various bioprocessing applications.

Process Analytics

Through our 2019 acquisition of C Technologies, we hold issued patents to various slope spectroscopy instruments, including an interactive variable pathlength device and related methods of use. C Technologies’ scientists are continually developing new analytical tools using its state of the art slope spectroscopy technology.

Proteins

We currently hold a patent for “Nucleic Acids Encoding Recombinant Protein A,” which claims sequences that encode a truncated recombinant Protein A but are otherwise identical to the natural Protein A, which is used for bioprocessing applications.

Pursuant to our collaboration with Navigo, we also have multiple patents and multiple pending patent applications globally covering Protein A-based affinity ligands through our collaboration with Navigo. These include ligands for antibody purification, as well as ligands for purifying COVID-19 vaccines.

In addition, with the acquisition of Avitide in September 2021, we have added multiple pending patent applications globally covering affinity ligands to our portfolio.

Trademarks

We procure and maintain trademark registrations globally for the Repligen trademark and our various product brands. We prioritize our “housemarks”, (e.g., Repligen, the stylized “R” logo, Spectrum, TangenX, C Technologies, ARTeSYN, Polymem, Avitide, etc), and ensure continued protection globally. We also have trademark registrations for various product lines, including OPUS, XCell ATF, TFDF, KrosFlo, SIUS, ProConnex, Spectra/Por, NGL-Impact, SoloVPE, FlowVPE, XO and AVIPure, that provide valuable company recognition and goodwill with our customers.

We have a comprehensive branding policy that includes trademark usage guidelines to ensure Repligen trademarks are used in accordance with our worldwide registrations and we actively police any unauthorized trademark usage as well as enforce the rights we have under our trademarks.

Licensing Agreements

We have entered into multiple licensing and collaboration relationships with third-party business partners in an effort to fully exploit our technology and advance our bioprocessing business strategy.

Competition

Our bioprocessing products compete on the basis of value proposition, performance, quality, cost effectiveness, and application suitability with numerous established technologies. Additional products using new technologies that may be competitive with our products may also be introduced. Many of the companies selling or developing competitive products, which in some cases include

13

Cytiva and MilliporeSigma (the life sciences business of Merck KGaA), two of our largest customers, have greater financial and human resources, R&D, manufacturing and marketing experience than we do. They may undertake their own development of products that are substantially similar to or compete with our products and they may succeed in developing products that are more effective or less costly than any that we may develop. These competitors may also prove to be more successful in their production, marketing and commercialization activities. We cannot be certain that the research, development and commercialization efforts of our competitors will not render any of our existing or potential products obsolete.

Manufacturing

A majority of our 16 key manufacturing sites are located in the United States (California, Massachusetts, New Jersey and New York). Outside the United States, we have manufacturing sites in Estonia, France, Germany, Ireland, the Netherlands and Sweden.

The proteins products we provide are manufactured at our sites in Waltham, Massachusetts and Lund, Sweden. Native Protein A ligands and our growth factor products are manufactured in Lund, while recombinant Protein A ligands are manufactured in both Waltham and Lund. Our primary chromatography assembly and manufacturing sites are located in Waltham and Ravensburg, Germany, with additional chromatography manufacturing suites being added in Breda, the Netherlands in 2021. Our primary filtration manufacturing sites are located in Marlborough, Massachusetts and Rancho Dominguez, California. In Marlborough, the focus is on XCell ATF and flat sheet TFF products, while in Rancho Dominguez the focus is on Spectrum HF, TFDF and ProConnex products. Our process analytics products are manufactured in Bridgewater, New Jersey. Our operating room products are manufactured in Irving, Texas. With our three acquisitions in 2021, we gained manufacturing sites in Toulouse, France (Polymem), Newton, New Jersey (NTM) and with our three acquisitions in 2020, we gained manufacturing sites in Clifton Park, New York (EMT) and Auburn, Massachusetts (NMS) for fluid management consumables. ARTeSYN’s primary manufacturing sites for fluid management products and systems are located in Waterford, Ireland and Tallinn, Estonia, with additional sites in California.

We utilize our own facilities in Waltham, Massachusetts and Lund, Sweden as well as third-party contract manufacturing organizations to carry out certain fermentation and recovery operations, while the purification, immobilization, packaging and quality control testing of our bioprocessing products are conducted at our facilities. Our facilities located in Waltham, Massachusetts; Lund, Sweden; Ravensburg, Germany; Bridgewater, New Jersey; Clifton Park, New York; and Rancho Dominguez, California are ISO 9001:2015 certified and maintain formal quality systems to maintain process control, traceability, and product conformance. Additionally, our facility in Irving, Texas is ISO 13485:2012 certified. We practice continuous improvement initiatives based on routine internal audits as well as external feedback and audits performed by our partners and customers. In addition, we maintain a business continuity management system that focuses on key areas such as contingency planning, security stocks and off-site storage of raw materials and finished goods to ensure continuous supply of our products.

Available Information

We maintain a website with the address www.repligen.com. We are not including the information contained on our website as a part of, or incorporating it by reference into, this Form 10-K. We make available free of charge through our website our Form 10-Ks, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to these reports, as soon as reasonably practicable after we electronically file such materials with, or furnish such materials to, the Securities and Exchange Commission (“SEC”). Our Second Amended and Restated Code of Business Conduct and Ethics is also available free of charge through our website.

Our filings with the SEC may be accessed through the SEC’s Electronic Data Gathering, Analysis and Retrieval (“EDGAR”) system at www.sec.gov.

14

ITEM 1A. RISK FACTORS

Investors should carefully consider the risk factors described below before making an investment decision.

If any of the events described in the following risk factors occur, our business, financial condition or results of operations could be materially harmed. In that case, the trading price of our common stock could decline and investors may lose all or part of their investment. Additional risks and uncertainties that we are unaware of or that we currently deem immaterial may also become important factors that affect Repligen.

This Annual Report on Form 10-K (“Form 10-K”) contains forward looking statements that involve risks and uncertainties. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of certain factors, including the risks faced by us described below and elsewhere in this Form 10-K.

Risks Related to Our Business

Risks Related to Competition, Sales and Marketing

We compete with life sciences, pharmaceutical and biotechnology companies who are capable of developing new approaches that could make our products and technology obsolete.

The bioprocessing market is intensely competitive, subject to rapid change and significantly affected by new product introductions and other market activities of industry participants.

We compete with several medium and small companies in each of our product categories as well as several large companies, including Danaher Corporation (Pall Corporation and Cytiva), Thermo Fisher Scientific Inc., MilliporeSigma and Sartorius. Many of our competitors are large, well-capitalized companies that may have greater financial, manufacturing, marketing, research and development resources than we have, as well as stronger name recognition, longer operating histories and benefits derived from greater economies of scale. As a consequence, they are able to spend more aggressively on product development, marketing, sales and other product initiatives than we can. Many of these competitors have:

These factors, among others, may enable our competitors to market their products at lower prices or on terms more advantageous to customers than what we can offer. Competition may result in price reduction, reduced gross margins and loss of market share, any of which could have a material adverse effect on our business, financial condition and results of operations.

Our current and future competitors, including certain of our customers, may at any time develop additional products that compete with our products. If any company develops products that compete with or are superior to our products, our revenue may decline. Additionally, new approaches by these competitors may make our products and technologies obsolete or noncompetitive.

As we evolve from a company dependent on others to commercialize our products to a company selling directly to end users, we may encounter difficulties in expanding our product portfolio and our commercial marketing capabilities.

Prior to 2016, we generated most of our revenues through sales of bioprocessing products to a limited number of life sciences companies, such as Cytiva, MilliporeSigma and other individual distributors. However, due in part to our recent strategic acquisitions, an increasing amount of our revenue is attributable to our commercialization of bioprocessing products that we sell directly to end-users, including biopharmaceutical companies and contract manufacturing organizations. This has required and will continue to

15

require us to invest additional resources in our sales and marketing capabilities. We may not be able to attract and retain additional sales and marketing professionals, and the cost of building the sales and marketing function may not generate our anticipated revenue growth. In addition, our sales and marketing efforts may be unsuccessful. Our failure to manage these risks may have a negative impact on our financial condition, or results of operations and may cause our stock price to decline.

If we are unable to continue to hire and retain skilled personnel, then we will have trouble developing and marketing our products.

Our success depends largely upon the continued service of our management and scientific staff and our ability to attract, retain and motivate highly skilled technical, scientific, management and marketing personnel. We also face significant competition in the hiring and retention of such personnel from other companies, research and academic institutions, government and other organizations who have superior funding and resources. The loss of key personnel or our inability to hire and retain skilled personnel could materially adversely affect our product development efforts and our business.

Despite our increasingly diversified client base, we have historically depended on a limited number of customers for a high percentage of our revenues.

The loss of, or a significant reduction in orders from, any of our large customers, including following any termination or failure to renew a long-term supply contract, would significantly reduce our revenues and harm our results of operations. If a large customer purchases fewer of our products, defers orders or fails to place additional orders with us for any reason, including for business continuity purposes, our revenue could decline, and our operating results may not meet market expectations.

In addition, if our customers order our products, but fail to pay on time or at all, our liquidity and operating results could be materially and adversely affected. Furthermore, if any of our current or future products compete with those of any of our largest customers, these customers may place fewer orders with us or cease placing orders with us, which would negatively affect our revenues and operating results.

Certain of our products are used by customers in the production of gene therapies, which represent a relatively new and still-developing mode of treatment. Unforeseen adverse events, negative clinical outcomes, or increased regulatory scrutiny of cell and gene therapy ("C&GT") and its financial cost may damage public perception of the safety, utility, or efficacy of gene therapies and may harm our customers’ ability to conduct their business. Such events may negatively impact our revenues and have an adverse effect on our performance.

C&GT remains a relatively new and developing treatment method, with only a few gene therapies approved to date by regulatory authorities. Public perception may be influenced by claims that C&GT is unsafe or ineffective, and C&GT may not gain the acceptance of the public or the medical community. In addition, ethical, social, legal, and financial concerns about C&GT and genetic testing could result in additional regulations, limitations or even prohibitions on certain cell and gene therapies or cell and gene-therapy-related products. More restrictive regulations or negative public perception could reduce certain of our customers’ use of our products, which could negatively affect our revenue and performance.

In response to the ongoing COVID-19 pandemic, certain of our products are used by customers in the development or manufacture of COVID-19 vaccines and therapeutics, some of which have not yet received regulatory approval or authorization. Unforeseen adverse events, regulatory interventions, the emergence of new variants of the virus rendering current vaccines and therapeutics ineffective and the development of next generation vaccines and therapeutics that do not incorporate our products may negatively impact our revenues and have an adverse effect on our performance.

Certain of our products are being used by our customers in the development or manufacture of COVID-19 vaccines and therapies. Certain of these therapies continue to be under development, while others have received approval or authorization in the applicable jurisdictions for sale and distribution. Negative outcomes in clinical trials, unforeseen adverse events in patients and decreased effectiveness in new and emerging COVID-19 variants may result in increased regulatory scrutiny, reduced public trust or withdrawals, pauses or restrictions on approvals or authorizations of vaccines and therapies that use our products and could reduce certain of our customers’ use of such products. Such events would have a negative impact on our revenues. In addition, if failure to obtain certain regulatory approvals or authorization or increased competition in the production of COVID-19 vaccines and therapies causes our customers to discontinue the use of our products in the development or manufacture of such therapies, our product revenues may decline, which would negatively impact our financial performance.

16

Risks Related to the COVID-19 Pandemic

The COVID-19 pandemic, or similar public health crises, could have a material adverse impact on our business, financial condition and results of operations, including our product sales and our stock price.

Since December 2019, an outbreak of a novel strain of a virus named SARS-CoV-2, or coronavirus, which causes COVID-19, has since spread to countries in which we or our customers and suppliers operate, including the United States. COVID-19 is evolving, and to date, has led to the implementation of various responses, including government-imposed quarantines, extended business closures, travel restrictions and other public health safety measures, as well as reported adverse impacts on healthcare resources, facilities and providers, in Massachusetts, across the United States and in other countries. The COVID-19 outbreak continues to rapidly evolve, including the spread of the Delta and Omicron variants.

In response to COVID-19, and in accordance with direction from state and local government authorities, we have restricted and may continue to restrict access to our facilities mostly to personnel and third parties who must perform critical activities that must be completed on-site, limited the number of such personnel that can be present at our facilities at any one time, and requested that most of our personnel work remotely. In the event that governmental authorities were to further modify current restrictions, our employees conducting research and development or manufacturing activities may not be able to access our manufacturing space. Certain of our third-party suppliers have experienced labor shortage due to the spread of COVID-19. Such shortages may lead to interruptions in our manufacturing activities and our product supply and could have a material adverse effect on our business and our results of operation and financial condition. Our revenues and other operating results depend in large part on our ability to manufacture and assemble our products in sufficient quantities and in a timely manner.

In addition, the trading prices for our common stock and other biopharmaceutical companies have been highly volatile as a result of COVID-19. As a result, we may face difficulties raising capital through sales of our common stock or such sales may be on unfavorable terms.

We operate on a global basis with offices or activities in Japan, South Korea, China, India, Europe and North America, and global health crises, such as COVID-19, could result in a widespread economic downturn in the industries in which we and our customers operate. The extent to which the outbreak impacts our business and the businesses of our customers will depend on future developments, which remain highly uncertain and cannot be predicted with confidence, such as the continued geographic spread of the disease, the duration of the outbreak, and actions taken in the United States and elsewhere to contain the outbreak and treat the disease, such as social distancing and quarantines, business closures or business disruptions. Some factors from COVID-19 that could delay or otherwise adversely affect the completion of our customers’ preclinical activities and clinical trials, as well as the healthcare industry generally, include:

17

Risks Related to Product Development and Acquisitions

If we are unable to expand our product portfolio, our ability to generate revenue could be adversely affected.

We are increasingly seeking to develop and commercialize our portfolio of products. Our future financial performance will depend, in part, on our ability to successfully develop and acquire additional bioprocessing products. There is no guarantee that we will be able to successfully acquire or develop additional bioprocessing products, and the Company’s financial performance will likely suffer if we are unable to do so.

Our acquisitions expose us to risks that could adversely affect our business, and we may not achieve the anticipated benefits of acquisitions of businesses or technologies.

As a part of our growth strategy, we may make selected acquisitions of complementary products and/or businesses, such as our recent acquisitions of Polymem, Avitide, BioFlex and NTM. Any acquisition involves numerous risks and operational, financial, and managerial challenges, including the following, any of which could adversely affect our business, financial condition, or results of operations:

18

In addition, the successful integration of acquired businesses requires significant efforts and expense across all operational areas, including sales and marketing, research and development, manufacturing, finance, legal, and information technologies. There can be no assurance that any of the acquisitions we may make will be successful or will be, or will remain, profitable. Our failure to successfully address the foregoing risks may prevent us from achieving the anticipated benefits from any acquisition in a reasonable time frame, or at all.

If intangible assets and goodwill that we recorded in connection with our acquisitions become impaired, we may have to take significant charges against earnings.

In connection with the accounting for our completed acquisitions, we recorded a significant amount of intangible assets, including developed technology and customer relationships relating to the acquired product lines, and goodwill. Under accounting principles generally accepted in the United States (“GAAP”), we must assess, at least annually and potentially more frequently, whether the value of intangible assets and goodwill has been impaired. Intangible assets and goodwill will be assessed for impairment in the event of an impairment indicator. Any reduction or impairment of the value of intangible assets and goodwill will result in a charge against earnings, which could materially adversely affect our results of operations and shareholders’ equity in future periods.

Risks Related to Manufacturing and Supply

If we are unable to manufacture our products in sufficient quantities and in a timely manner, our operating results will be harmed, our ability to generate revenue could be diminished and our gross margin may be negatively impacted.

Our revenues and other operating results will depend in large part on our ability to manufacture and assemble our products in sufficient quantities and in a timely manner. Any interruptions we experience in the manufacturing or shipping of our products could delay our ability to recognize revenues in a particular quarter. Manufacturing problems can and do arise, and as demand for our products increases, any such problems could have an increasingly significant impact on our operating results. While we have not generally experienced problems with, or delays in, our production capabilities that resulted in delays in our ability to ship finished products, there can be no assurance that we will not encounter such problems in the future. We may not be able to quickly ship products and recognize anticipated revenues for a given period if we experience significant delays in the manufacturing process. In addition, we must maintain sufficient production capacity in order to meet anticipated customer demand, which carries fixed costs that we may not be able to offset if orders slow, which would adversely affect our operating margins. If we are unable to manufacture our products consistently, in sufficient quantities, and on a timely basis, our bioprocessing revenue, gross margins and our other operating results will be materially and adversely affected.

We rely on a limited number of suppliers or, for certain of our products, one supplier, and we may not be able to find replacements or immediately transition to alternative suppliers, which could have a material adverse effect on our financial condition, results of operations and reputation.

There are only a limited number of suppliers of materials for certain of our products. An interruption in operations of the business related to these products could occur if we encounter delays or difficulties in securing the required materials, or if we cannot then obtain an acceptable substitute. Any such interruption could significantly affect the business related to these products and our financial condition, results of operations and reputation. For example, we believe that only a small number of suppliers are currently qualified to supply materials for the XCell ATF® systems. The use of materials furnished by these replacement suppliers would require us to alter our operations related to the XCell ATF systems. Transitioning to a new supplier for our products would be time-consuming and expensive, may result in interruptions in our operations, could affect the performance specifications of our product lines or could require that we revalidate the materials.

There can be no assurance that we will be able to secure alternative materials and bring such materials online and revalidate them without experiencing interruptions in our workflow. If we should encounter delays or difficulties in securing, reconfiguring or

19

revalidating the materials required for our products, our business related to these products and our financial condition, results of operations and reputation could be adversely affected.

Risks Related to Our Financial Position and Need for Additional Capital

Servicing our debt will require a significant amount of cash, and we may not have sufficient cash flow from our business to make payments on our debt.

In 2019, we incurred significant indebtedness in the amount of $287.5 million in aggregate principal with additional accrued interest under our 0.375% Convertible Senior Notes due 2024 (the “2019 Notes”). Our ability to make scheduled payments of the principal of, to pay interest on, or to refinance our indebtedness, including the 2019 Notes, depends on our future performance, which is subject to economic, financial, competitive and other factors that may be beyond our control. Our business may not generate cash flow from operations in the future sufficient to service our debt and make necessary capital expenditures. If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring debt or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to refinance our indebtedness will depend on the capital markets and our financial condition at such time. In addition, in the event of a fundamental change or a default under the 2019 Notes, the holders and/or the trustee under the indentures governing the 2019 Notes may accelerate the payment obligations or trigger the holders’ repurchase rights under the 2019 Notes. We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on our debt obligations, including the 2019 Notes.

If a make-whole fundamental change, such as an acquisition of our company, occurs prior to the maturity of the 2019 Notes, under certain circumstances, the conversion rate for the 2019 Notes will increase such that additional shares of our common stock will be issued upon conversion of the 2019 Notes in connection with such make-whole fundamental change. The increase in the conversion rate will be determined based on the date on which the make-whole fundamental change occurs or becomes effective and the price paid (or deemed paid) per share of our common stock in such transaction. Upon conversion of the 2019 Notes, unless we elect to deliver solely shares of our common stock to settle such conversion (other than paying cash in lieu of delivering any fractional share), we will be required to make cash payments in respect of the 2019 Notes being converted. We may not have enough available cash or be able to obtain financing at the time we are required to make repurchases of 2019 Notes surrendered therefor or notes being converted. Our failure to repurchase 2019 Notes at a time when the repurchase is required by the indenture or to pay any cash payable on future conversions of the 2019 Notes as required by the indenture would constitute a default under the indenture. If the repayment of the related indebtedness were to be accelerated after any applicable notice or grace periods, we may not have sufficient funds to repay the indebtedness and repurchase the 2019 Notes or make cash payments upon conversions thereof.

In addition, our significant indebtedness, combined with our other financial obligations and contractual commitments, could have other important consequences. For example, it could:

Any of these factors could materially and adversely affect our business, financial condition and results of operations. In addition, if we incur additional indebtedness, the risks related to our business and our ability to service or repay our indebtedness would increase.

Future strategic transactions or acquisitions may require us to seek additional financing, which we may not be able to secure on favorable terms, if at all.

We plan to continue a strategy of growth and development for our bioprocessing business, and we actively evaluate various strategic transactions on an ongoing basis, including licensing or acquiring complementary products, technologies or businesses that would complement our existing portfolio of development programs. In order to complete such strategic transactions, we may need to seek additional financing to fund these investments and acquisitions. Should we need to do so, we may not be able to secure such financing,

20

or obtain such financing on favorable terms because of the volatile nature of the biotechnology marketplace. In addition, future acquisitions may require the issuance or sale of additional equity or debt securities, which may result in additional dilution to our stockholders.

Our exposure to political, economic and other risks that arise from operating a multinational business has and may continue to increase.

We operate on a global basis with offices or activities in Japan, South Korea, China, India, Europe and North America. Our operations and sales outside of the United States have increased as a result of our strategic acquisitions and the continued expansion of our commercial organization. Risks related to these increased foreign operations include:

Our business success depends in part on our ability to anticipate and effectively manage these and other related factors. We cannot assure you that these and other related factors will not materially adversely affect our international operations or business as a whole.

In addition, a deterioration in diplomatic relations between the United States and any country where we conduct business could adversely affect our future operations and lead to a decline in profitability. In 2018 and 2019, the United States imposed tariffs on goods imported from China and certain other countries, which has resulted in retaliatory tariffs by China and other countries. Additional tariffs or further retaliatory trade measures taken by China or other countries in response, could affect the demand for our products and services, impact the competitive position of our products, prevent us from being able to sell products in certain countries or otherwise adversely impact our results of operations.

We may be unable to efficiently manage our growth as a larger and more geographically diverse organization.

Our strategic acquisitions, the continued expansion of our commercial sales operations, and our organic growth have increased the scope and complexity of our business. As a result, we will face challenges inherent in efficiently managing a more complex business with an increased number of employees over large geographic distances, including the need to implement appropriate systems, policies, benefits and compliance programs. Our inability to manage successfully the geographically and culturally diverse, and substantially larger combined organization could materially adversely affect our operating results and, as a result, the market price of our common stock.

21

Our results of operations could be negatively affected by potential fluctuations in foreign currency exchange rates.

We conduct a large portion of our business in international markets. For the fiscal year ended December 31, 2021, 37.5% of our revenues and 27.1% of our costs and expenses were denominated in foreign currencies, primarily the Swedish krona, the British pound sterling, and the Euro. We are exposed to the risk of an increase or decrease in the value of the foreign currencies relative to the U.S. Dollar, which could increase the value of our expenses and decrease the value of our revenue when measured in U.S. Dollars. As a result, our results of operation may be influenced by the effects of future exchange rate fluctuations and such effects may have an adverse impact on our common stock price.

Natural disasters, geopolitical unrest, war, terrorism, public health issues or other catastrophic events could disrupt the supply, delivery or demand of products, which could negatively affect our operations and performance.

We are subject to the risk of disruption by earthquakes, floods and other natural disasters, fire, power shortages, geopolitical unrest, war, terrorist attacks and other hostile acts, public health issues, epidemics or pandemics and other events beyond our control and the control of the third parties on which we depend. Any of these catastrophic events, whether in the United States or abroad, may have a strong negative impact on the global economy, our employees, facilities, partners, suppliers, distributors or customers, and could decrease demand for our products, create delays and inefficiencies in our supply chain and make it difficult or impossible for us to deliver products to our customers.

For example, COVID-19 has affected countries in which we or our suppliers operate, including the United States. This outbreak has resulted in the extended shutdown of certain businesses, which may in turn result in disruptions to our and our customer’s supply chain and business operations. These could include disruptions from the temporary closure of third-party supplier and manufacturer facilities, interruptions in product supply, or restrictions on the export or shipment of our products. Global health concerns, such as COVID-19, could also continue to result in social, economic, and labor instability in the countries in which we or our customers and suppliers operate. These uncertainties could have a material adverse effect on our business and our results of operation and financial condition.

In addition, a catastrophic event that results in the destruction or disruption of our data centers or our critical business or information technology systems would severely affect our ability to conduct normal business operations and, as a result, our operating results would be adversely affected.

Legal, political and economic uncertainty surrounding the withdrawal of the United Kingdom from the European Union is a source of instability and uncertainty.

On June 23, 2016, the United Kingdom (“U.K.”) held a referendum in which a majority of voters approved an exit from the European Union (“EU”). The U.K. formally left the EU on January 31, 2020, in a process commonly referred to as “Brexit”. Under a withdrawal agreement (the “Withdrawal Agreement”) between the EU and the U.K., the United Kingdom was subject to a transition period until December 31, 2020, during which EU rules continued to apply.

The U.K. and EU have signed an EU-UK Trade and Cooperation Agreement, which became provisionally applicable on January 1, 2021, and has been formally applicable since May 1, 2021. Under the terms of the deal, the EU and U.K. have separate regulatory regimes for medicinal products, although there are some provisions for mutual recognition of standards, for example with regards to good manufacturing practices. Many of the regulations that now apply in the U.K. following the transition period (including financial laws and regulations, tax, intellectual property rights, data protection laws, supply chain logistics, environmental, health and safety laws and regulations, medicine approval and regulations, immigration laws and employment laws), could be amended in future as the U.K. determines its new approach, which may result in significant divergence from EU regulations. This lack of clarity on future U.K. laws and regulations and their interaction with the EU laws and regulations increases our regulatory burden of operating in and doing business with both the U.K. and the EU.

In addition, as a result of Brexit, EU countries may seek to conduct referenda with respect to their continuing membership with the EU. If other EU Member States pursue withdrawal, barrier-free access between the U.K. and other EU Member States or among the European Economic Area (“E.E.A.”) overall could be diminished or eliminated. The long-term effects of Brexit will also depend on any further agreements (or lack thereof) between the U.K. and the EU. Such a withdrawal from the EU is unprecedented, and it is

22

unclear how the restrictions on the U.K.’s access to the European single market for goods, capital, services and labor within the EU, or single market, and the wider commercial, legal and regulatory environment, could impact our U.K. operations.

We may also face new regulatory costs and challenges that could have an adverse effect on our operations and development programs. For example, the U.K. will lose the benefits of global trade agreements negotiated by the EU on behalf of its members, which may result in increased trade barriers that could make our doing business in the EU and the E.E.A. more difficult. There may continue to be economic uncertainty surrounding the consequences of Brexit, which could adversely affect our financial condition, results of operations, cash flows and market price of our common stock.

Risks Related to Ownership of Our Common Stock

Risks Related to Investment in Our Securities

Our operating results may fluctuate significantly, our customers’ future purchases are difficult to predict and any failure to meet financial expectations may result in a decline in our stock price.

Our quarterly operating results may fluctuate in the future as a result of many factors such as the impact of seasonal spending patterns, changes in overall spending levels in the life sciences industry, the inability of some of our customers to consummate anticipated purchases of our products due to changes in end-user demand, and other unpredictable factors that may affect ordering patterns. Because our revenue and operating results are difficult to predict, we believe that our past results of operations are not necessarily a good indicator of our future performance. Additionally, if revenue declines in a quarter, whether due to a delay in recognizing expected revenue, adverse economic conditions or otherwise, our results of operations will be harmed because many of our expenses are relatively fixed. In particular, a large portion of our manufacturing costs, our research and development, sales and marketing and general and administrative expenses are not significantly affected by variations in revenue. Further, our gross margins are dependent on product mix. A shift in sales mix away from our higher-margin products to lower margin products will adversely affect our gross margins. If our quarterly operating results fail to meet investor expectations, the price of our common stock may decline.

Securities or industry analysts may not publish favorable research or reports about our business or may publish no information, which could cause our stock price or trading volume to decline.

The trading market for our common stock is influenced by the research and reports that industry or securities analysts publish about us and our business. We do not have any control over these analysts and we cannot provide any assurance that analysts will cover us or provide favorable coverage. If any of the analysts who cover us issue an adverse opinion regarding our stock price, our business or stock price would likely decline. If one or more of these analysts cease coverage of our company or fail to regularly publish reports covering us, we could lose visibility in the market, which in turn could cause our stock price or trading volume to decline.

Our stock price could be volatile, which could cause shareholders to lose part or all of their investment.

The market price of our common stock, like that of the common stock of many other companies with similar market capitalizations, is highly volatile. In addition, the stock market has experienced extreme price and volume fluctuations. This volatility has significantly affected the market prices of securities of many life sciences, biotechnology and pharmaceutical companies for reasons frequently unrelated to or disproportionate to the operating performance of the specific companies. These broad market fluctuations may adversely affect the market price of our common stock.

If we fail to maintain an effective system of internal controls, we may not be able to accurately report financial results or prevent fraud. If we identify a material weakness in our internal control over financial reporting, our ability to meet our reporting obligations and the trading price of our stock could be negatively affected.

Effective internal controls are necessary to provide reliable financial reports and to assist in the effective prevention of fraud. Any inability to provide reliable financial reports or prevent fraud could harm our business. We regularly review and update our internal controls, disclosure controls and procedures, and corporate governance policies. In addition, we are required under the Sarbanes-Oxley Act of 2002 to report annually on our internal control over financial reporting. Any system of internal controls, however well designed and operated, is based in part on certain assumptions and can provide only reasonable, not absolute, assurances that the objectives of the system are met. If we, or our independent registered public accounting firm, determine that our internal controls over financial reporting are not effective, discover areas that need improvement in the future or discover a material weakness, these shortcomings could have an adverse effect on our business and financial results, and the price of our common stock could be negatively affected. A

23

material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. Accordingly, a material weakness increases the risk that the financial information we report contains material errors.

If we cannot conclude that we have effective internal control over our financial reporting, or if our independent registered public accounting firm is unable to provide an unqualified opinion regarding the effectiveness of our internal control over financial reporting, investors could lose confidence in the reliability of our financial statements, which could lead to a decline in our stock price. Failure to comply with reporting requirements could also subject us to sanctions and/or investigations by the SEC, the Nasdaq Global Select Market or other regulatory authorities. We have previously implemented several significant ERP modules and expect to implement additional ERP modules in the future. The implementation of the ERP system represents a change in our internal control over financial reporting. Although we continue to monitor and assess our internal controls in the new ERP system environment as changes are made and new modules are implemented, and we have taken additional steps to modify and enhance the design and effectiveness of our internal control over financial reporting, there is a risk that deficiencies may occur that could aggregate to a material weakness.

If we fail to remedy any deficiencies or maintain the adequacy of our internal controls, we could be subject to regulatory scrutiny, civil or criminal penalties or shareholder litigation. In addition, failure to maintain adequate internal controls could result in financial statements that do not accurately reflect our operating results or financial condition.

Risks Related to Our Charter and Bylaws

Anti-takeover provisions in our charter documents, certain of our contracts with third parties, and under Delaware law could make an acquisition of us, even one that may be beneficial to our stockholders, more difficult and may prevent attempts by our stockholders to replace or remove our current management.

Provisions in our certificate of incorporation and by-laws may delay or prevent an acquisition of us or a change in our management. These provisions include the ability of our board of directors to issue preferred stock without stockholder approval. In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which limits the ability of stockholders owning in excess of 15% of our outstanding voting stock to merge or combine with us. Although we believe these provisions collectively provide for an opportunity to obtain greater value for stockholders by requiring potential acquirers to negotiate with our board of directors, they would apply even if an offer rejected by our board was considered beneficial by some stockholders. Additionally, certain of our contracts with third parties allow for termination upon specified change of control transactions. Anti-takeover provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors, which is responsible for appointing the members of our management, and anti-takeover or change of control contract termination rights may frustrate or prevent any attempts by a third-party to acquire or attempt to acquire the Company.

Risks Related to Tax Matters

The enactment of legislation implementing changes in taxation of international business activities, the adoption of other corporate tax reform policies, or changes in tax legislation or policies, or interpretations thereof, could materially impact our financial position and results of operations.

Corporate tax reform, base-erosion efforts and tax transparency continue to be high priorities in many tax jurisdictions where we have business operations. As a result, policies regarding corporate income and other taxes in numerous jurisdictions are under heightened scrutiny and tax reform legislation is being proposed or enacted in a number of jurisdictions. There is no assurance that our actual income tax liability will not be materially different than what is reflected in our income tax provisions and accruals as a result of changes in tax laws.

In addition, many countries are beginning to implement legislation and other guidance to align their international tax rules with the Organisation for Economic Co-operation and Development’s Base Erosion and Profit Shifting recommendations and action plan that aim to standardize and modernize global corporate tax policy, including changes to cross-border tax, transfer pricing documentation rules, and nexus-based tax incentive practices. Because of the heightened scrutiny of corporate taxation policies, prior decisions by tax authorities regarding treatments and positions of corporate income taxes could be subject to enforcement activities, and legislative

24

investigation and inquiry, which could also result in changes in tax policies or prior tax rulings. Any such changes in policies or rulings may also result in the taxes we previously paid being subject to change.

Due to the large scale of our international business activities, any substantial changes in international corporate tax policies, enforcement activities or legislative initiatives may materially adversely affect our business, the amount of taxes we are required to pay and our financial condition and results of operations generally.

Our ability to use net operating loss and tax credit carryforwards and certain built-in losses to reduce future tax payments is limited by provisions of the Internal Revenue Code, and it is possible that certain transactions or a combination of certain transactions may result in material additional limitations on our ability to use our net operating loss and tax credit carryforwards.

Section 382 and 383 of the Internal Revenue Code of 1986, as amended, contain rules that limit the ability of a company that undergoes an ownership change, which is generally any change in ownership of more than 50 percentage points of its stock over a three-year period, to utilize its net operating loss and tax credit carryforwards and certain built-in losses recognized in years after the ownership change. These rules generally operate by focusing on ownership changes involving stockholders owning directly or indirectly 5% or more of the stock of a company and any change in ownership arising from a new issuance of stock by the company. Generally, if an ownership change occurs, the yearly taxable income limitation on the use of net operating loss and tax credit carryforwards and certain built-in losses is equal to the product of the applicable long-term, tax-exempt rate and the value of the company’s stock immediately before the ownership change. We may be unable to offset our taxable income with losses, or our tax liability with credits, before such losses and credits expire and therefore would incur larger federal income tax liability. While our most recent Section 382 analysis did not show any current limitations, future transactions or combinations of future transactions may result in a change in control under Section 382 in the future. Federal net operating losses generated after December 31, 2017 are not subject to expiration and generally may not be carried back to prior taxable years except that, under the Coronavirus Aid, Relief, and Economic Security Act, net operating losses generated in 2018, 2019 and 2020 may be carried back five taxable years. Additionally, for taxable years beginning after December 31, 2020, the deductibility of such deferral net operating losses is limited to 80% of our taxable income in any future taxable year.

Risks Related to Government Regulation

Risks Related to Regulations and Compliance

We are subject to export and import control laws and regulations that could impair our ability to compete in international markets or subject us to liability if we violate such laws and regulations.

We are subject to U.S. export controls and sanctions regulations that restrict the shipment or provision of certain products and services to certain countries, governments, and persons. While we take precautions to prevent our products and services from being exported in violation of these laws, we cannot guarantee that the precautions we take will prevent violations of export control and sanctions laws. We believe that, in the past, we and our subsidiaries may have exported certain products without a required export license in apparent violation of U.S. export control laws. As a result, we have submitted to the U.S. Department of Commerce’s Bureau of Industry and Security various notices of voluntary self-disclosure concerning potential violations. If we are found to be in violation of U.S. sanctions or export control laws, it could result in substantial fines and penalties for us and for the individuals working for us. We may also be adversely affected through other penalties, reputational harm, loss of access to certain markets, or otherwise.

Complying with export control and sanctions regulations may be time-consuming and may result in the delay or loss of sales opportunities or impose other costs. Any change in export or import regulations, economic sanctions or related legislation, or change in the countries, governments, persons or technologies targeted by such regulations, could result in our decreased ability to export or sell certain products to existing or potential customers in affected jurisdictions.

Our business is subject to a number of environmental risks.

Our manufacturing business involves the controlled use of hazardous materials and chemicals and is therefore subject to numerous environmental and safety laws and regulations and periodic inspections for possible violations of these laws and regulations. In addition to these hazardous materials and chemicals, our facility in Sweden also uses Staphylococcus aureus and toxins produced by Staphylococcus aureus in some of its manufacturing processes. Staphylococcus aureus and the toxins it produces, particularly enterotoxins, can cause severe illness in humans. The costs of compliance with environmental and safety laws and regulations are

25

significant. Any violations, even if inadvertent or accidental, of current or future environmental and safety laws or regulations and the cost of compliance with any resulting order or fine could adversely affect our operations.

Health care reform measures could adversely affect our business.

The efforts of governmental and third-party payors to contain or reduce the costs of health care may adversely affect the business and financial condition of pharmaceutical and biotechnology companies, including ours. Specifically, in both the United States and some foreign jurisdictions, there have been a number of legislative and regulatory proposals to change the health care system in ways that could affect our ability to sell our products profitably. For example, in March 2010, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010 (together, the “ACA”), was passed, which substantially changes the way health care is financed by both governmental and private insurers and significantly impacts the U.S. life sciences industry. The ACA and other federal and state proposals and health care reforms could limit the prices that can be charged for the products we develop and may limit our commercial opportunity.

The ACA subjected biologic products to potential competition by lower-cost biosimilars; addressed a new methodology by which rebates owed by manufacturers under the Medicaid Drug Rebate Program are calculated for drugs that are inhaled, infused, instilled, implanted or injected; increased the minimum Medicaid rebates owed by most manufacturers under the Medicaid Drug Rebate Program; extended the Medicaid Drug Rebate program to utilization of prescriptions of individuals enrolled in Medicaid-managed care organizations; subjected manufacturers to new annual fees and taxes for certain branded prescription drugs; created a new Medicare Part D coverage gap discount program, in which manufacturers must agree to offer 50% (increased to 70% pursuant to the Bipartisan Budget Act of 2018, effective as of January 1, 2019) point-of-sale discounts off negotiated prices of applicable brand drugs to eligible beneficiaries during their coverage gap period, as a condition for the manufacturer’s outpatient drugs to be covered under Medicare Part D; and provided incentives to programs that increase the federal government’s comparative effectiveness research.

Recent federal government efforts have been aimed at amending or repealing all or portions of existing health care reform legislation, including the ACA. Changes in existing health care reform measures may result in uncertainty with respect to legislation, regulation and government policy that could significantly impact our business and the life sciences industry. Since its enactment, there have been numerous judicial, administrative, executive, and legislative challenges to certain aspects of the ACA, and we expect there will be additional challenges and amendments to the ACA in the future. Since its enactment, there have been judicial, U.S. Congressional and executive challenges to certain aspects of the ACA. On June 17, 2021, the United States Supreme Court dismissed the most recent judicial challenge to the ACA brought by several states without specifically ruling on the constitutionality of the ACA. Prior to the United States Supreme Court’s decision, President Biden issued an executive order to initiate a special enrollment period from February 15, 2021 through August 15, 2021 for purposes of obtaining health insurance coverage through the ACA marketplace. The executive order also instructed certain governmental agencies to review and reconsider their existing policies and rules that limit access to healthcare, including among others, reexamining Medicaid demonstration projects and waiver programs that include work requirements, and policies that create unnecessary barriers to obtaining access to health insurance coverage through Medicaid or the ACA. It is unclear how other healthcare reform measures of the Biden Administration or other efforts, if any, to challenge, repeal or replace the ACA will impact our business.

Various portions of the ACA are currently undergoing legal and constitutional challenges in the United States Supreme Court; the former Trump Administration issued various executive orders that eliminated cost sharing subsidies and various provisions that would impose a fiscal burden on states or a cost, fee, tax, penalty or regulatory burden on individuals, healthcare providers, health insurers, or manufacturers of pharmaceuticals or medical devices; and Congress has introduced several pieces of legislation aimed at significantly revising or repealing the ACA. Also, in December 2018, the Centers for Medicare & Medicaid Services (“CMS”) issued a final rule permitting further collections and payments to and from certain ACA qualified health plans and health insurance issuers under the ACA risk adjustment program. Since then, the ACA risk adjustment program payment parameters have been updated annually. On December 20, 2019, former President Trump signed into law the Further Consolidated Appropriations Act (H.R. 1865), which repeals the Cadillac tax, the health insurance provider tax, and the medical device excise tax. It is impossible to determine whether similar taxes could be instated in the future. It is unclear whether the ACA will be overturned, repealed, replaced, or further amended. We cannot predict what effect further changes to the ACA would have on our business.

26

In addition, other legislative and regulatory changes have been proposed and adopted in the United States since the ACA was enacted:

Additionally, there has been increasing legislative and enforcement interest in the United States with respect to drug pricing practices. Specifically, there has been heightened governmental scrutiny over the manner in which manufacturers set prices for their marketed products, which has resulted in several U.S. Congressional inquiries and proposed and enacted federal and state legislation designed to, among other things, bring more transparency to drug pricing, reduce the cost of prescription drugs under Medicare, and review the relationship between pricing and manufacturer patient programs. At a federal level, President Biden signed an executive order on July 9, 2021 affirming the administration’s policy to (i) support legislative reforms that would lower the prices of prescription drug and biologics, including by allowing Medicare to negotiate drug prices, by imposing inflation caps, and, by supporting the development and market entry of lower-cost generic drugs and biosimilars; and (ii) support the enactment of a public health insurance option. Among other things, the executive order also directs the U.S. Department of Health and Human Services ("HHS") to provide a report on actions to combat excessive pricing of prescription drugs, enhance the domestic drug supply chain, reduce the price that the federal government pays for drugs, and address price gouging in the industry; and directs the FDA to work with states and Indian Tribes that propose to develop section 804 Importation Programs in accordance with the Medicare Prescription Drug, Improvement, and Modernization Act of 2003, and the FDA’s implementing regulations. FDA released such implementing regulations on September 24, 2020, which went into effect on November 30, 2020, providing guidance for states to build and submit importation plans for drugs from Canada. On September 25, 2020, CMS stated drugs imported by states under this rule will not be eligible for federal rebates under Section 1927 of the Social Security Act and manufacturers would not report these drugs for “best price” or "average manufacturer price" purposes. Since these drugs are not considered covered outpatient drugs, CMS further stated it will not publish a national average drug acquisition cost for these drugs. If implemented, importation of drugs from Canada may materially and adversely affect the price we receive for any of our product candidates. Further, on November 20, 2020 CMS issued an interim final rule implementing the most favored nation ("MFN") model under which Medicare Part B reimbursement rates would have been be calculated for certain drugs and biologicals based on the lowest price drug manufacturers receive in Organisation for Economic Co-operation and Development countries with a similar gross domestic product per capita. However, on August 6, 2021 CMS announced a proposed rule to rescind the MFN model rule. Additionally, on November 30, 2020, HHS published a regulation removing safe harbor protection for price reductions from pharmaceutical manufacturers to plan sponsors under Medicare Part D, either directly or through pharmacy benefit managers, unless the price reduction is required by law. The rule also creates a new safe harbor for price reductions reflected at the point-of-sale, as well as a safe harbor for certain fixed fee arrangements between pharmacy benefit

27

managers and manufacturers. Pursuant to court order, the removal and addition of the aforementioned safe harbors were delayed and recent legislation imposed a moratorium on implementation of the rule until January 1, 2026. Although a number of these and other proposed measures may require authorization through additional legislation to become effective, and the Biden Administration may reverse or otherwise change these measures, both the Biden Administration and Congress have indicated that they will continue to seek new legislative measures to control drug costs. We expect that additional U.S. federal healthcare reform measures will be adopted in the future, any of which could limit the amounts that the U.S. federal government will pay for healthcare drugs and services, which could result in reduced demand for our products or additional pricing pressures.

Additionally, the federal government and individual states in the United States have also become increasingly active in passing legislation and implementing regulations designed to control pharmaceutical product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing. Legally mandated price controls on payment amounts by third-party payors or other restrictions could harm our business, financial condition, results of operations and prospects. In addition, regional healthcare authorities and individual hospitals are increasingly using bidding procedures to determine what pharmaceutical products and which suppliers will be included in their prescription drug and other healthcare programs. This could reduce the ultimate demand for our products or put pressure on drug pricing, which could negatively affect our business, financial condition, results of operations and prospects. We expect that additional state and federal healthcare reform measures will be adopted in the future.

We may be exposed to liabilities under the Foreign Corrupt Practices Act, and any determination that we violated the Foreign Corrupt Practices Act could have a material adverse effect on our business.

We are subject to the Foreign Corrupt Practice Act of 1977 (the “FCPA”) and other laws that prohibit improper payments or offers of payments to foreign governments and their officials and political parties by U.S. persons and issuers as defined by the statute for the purpose of obtaining or retaining business. We have operations and agreements with third parties and make sales in jurisdictions outside of the United States, which may experience corruption. Our activities in jurisdictions outside of the United States create the risk of unauthorized payments or offers of payments by one of our employees, consultants, sales agents or distributors, because these parties are not always subject to our control. These risks have increased following our recent acquisitions of overseas operations and facilities. It is our policy to implement safeguards to discourage these practices by our employees. However, our existing safeguards and any future improvements may prove to be less than effective, and the employees, consultants, sales agents or distributors of Repligen may engage in conduct for which we might be held responsible. Violations of the FCPA may result in severe criminal or civil sanctions, and we may be subject to other liabilities, which could negatively affect our business, operating results and financial condition. In addition, the government may seek to hold us liable for successor liability FCPA violations committed by any companies in which we invest or that we acquire.

Changes in accounting standards and subjective assumptions, estimates, and judgments by management related to complex accounting matters could significantly affect our financial results or financial condition.

Generally accepted accounting principles and related accounting pronouncements, implementation guidelines, and interpretations with regard to a wide range of matters that are relevant to our business, such as revenue recognition, asset impairment and fair value determinations, inventories, business combinations and intangible asset valuations, leases, and litigation, are highly complex and involve many subjective assumptions, estimates, and judgments. Changes in these rules or their interpretation or changes in underlying assumptions, estimates, or judgments could significantly change our reported or expected financial performance or financial condition.

Risks Related to Data and Privacy

Our internal computer systems, or those of our customers, collaborators or other contractors, may be subject to cyber-attacks or security breaches, which could result in a material disruption of our product development programs.

Despite the implementation of security measures, our internal computer systems and those of our customers, collaborators cloud-based platform service providers, and other contractors are vulnerable to damage from computer viruses and unauthorized access. Cyber-attacks are increasing in their frequency, sophistication and intensity, and have become increasingly difficult to detect. Cyber-attacks could include the deployment of harmful malware, ransomware, denial-of-service attacks, social engineering and other means to affect service reliability and threaten the confidentiality, integrity and availability of information. Cyber-attacks also could include phishing

28

attempts or e-mail fraud to cause payments or information to be transmitted to an unintended recipient. A material cyber-attack or security breach could cause interruptions in our operations and could result in a material disruption of our business operations, damage to our reputation or a loss of revenues.

In the ordinary course of our business, we collect and store sensitive data, including, among other things, personally identifiable information about our employees, intellectual property, and proprietary business information. Any cyber-attack or security breach that leads to unauthorized access, use or disclosure of personal or proprietary information could harm our reputation, cause us not to comply with federal and/or state breach notification laws and foreign law equivalents and otherwise subject us to liability under laws and regulations that protect the privacy and security of personal information. In addition, we could be subject to risks caused by misappropriation, misuse, leakage, falsification or intentional or accidental release or loss of information maintained in the information systems and networks of our company and our vendors, including personal information of our employees, and company and vendor confidential data. In addition, outside parties may attempt to penetrate our systems or those of our vendors or fraudulently induce our personnel or the personnel of our vendors to disclose sensitive information in order to gain access to our data and/or systems. Like other companies, we have on occasion experienced, and will continue to experience, data security incidents involving access to company data threats to our data and systems, including malicious codes and viruses, phishing, business email compromise attacks, or other cyber-attacks. The number and complexity of these threats continue to increase over time. If a material breach of our information technology systems or those of our vendors occurs, the market perception of the effectiveness of our security measures could be harmed and our reputation and credibility could be damaged.

We could be required to expend significant amounts of money and other resources to respond to these threats or breaches, and to repair or replace information systems or networks and could suffer financial loss or the loss of valuable confidential information. In addition, we could be subject to regulatory actions and/or claims made by individuals and groups in private litigation involving privacy issues related to data collection and use practices and other data privacy laws and regulations, including claims for misuse or inappropriate disclosure of data, as well as unfair or deceptive practices. Although we procure, develop and maintain systems and controls designed to prevent these events from occurring, and we have a process to identify and mitigate threats, the procurement, development and maintenance of these systems, controls and processes is costly and requires ongoing monitoring and updating as technologies change and efforts to overcome security measures become increasingly sophisticated. Moreover, despite our efforts, the possibility of these events occurring cannot be eliminated entirely and there can be no assurance that any measures we take will prevent cyber-attacks or security breaches that could adversely affect our business.

Changes in laws and regulations governing the privacy and protection of data and personal information could adversely affect our business.

We are subject to data privacy and protection laws and regulations that apply to the collection, transmission, storage and use of proprietary information and personally-identifying information, which among other things, imposes certain requirements relating to the privacy, security and transmission of certain individually identifiable information. In addition, numerous other federal and state laws, including state security breach notification laws, state health information privacy laws and federal and state consumer protection laws, govern the collection, use, disclosure and security of personal information. These laws continue to change and evolve and are increasing in breadth and impact.

For example, California enacted the California Consumer Privacy Act (“CCPA”), which went into effect in January 2020 and became enforceable by the California Attorney General in July 2020, and which, among other things, requires companies covered by the legislation to provide new disclosures to California consumers and afford such consumers new rights with respect to their personal information, including the right to request deletion of their personal information, the right to receive the personal information on record for them, the right to know what categories of personal information generally are maintained about them, as well as the right to opt-out of certain sales of personal information. The CCPA provides civil penalties for violations, as well as a private right of action for certain data breaches that result in the loss of personal information. This private right of action may increase the likelihood of, and risks associated with, data breach litigation.

Additionally, a new California ballot initiative, the California Privacy Rights Act (“CPRA”) was passed in November 2020. Effective January 1, 2023, the CPRA imposes additional obligations on companies covered by the legislation and will significantly modify the CCPA by expanding consumers’ rights with respect to certain sensitive personal information, among other things. The CPRA also creates a new state agency that will be vested with authority to implement and enforce the CCPA and the CPRA. The effects of the

29

CCPA and the CPRA are potentially significant and may require us to modify our data collection or processing practices and policies, incur substantial costs and expenses in an effort to comply and increase our potential exposure to regulatory enforcement and/or litigation.

Certain other state laws impose similar privacy obligations and we anticipate that more states may enact legislation similar to the CCPA, which provides consumers with new privacy rights and increases the privacy and security obligations of entities handling certain personal information of such consumers. The CCPA has prompted a number of proposals for new federal and state-level privacy legislation. Such proposed legislation, if enacted, may add additional complexity, variation in requirements, restrictions and potential legal risk, require additional investment of resources in compliance programs, impact strategies and the availability of previously useful data and could result in increased compliance costs and/or changes in business practices and policies.

The regulatory framework governing the collection, processing, storage, use and sharing of certain information is rapidly evolving and is likely to continue to be subject to uncertainty and varying interpretations. It is possible that these laws may be interpreted and applied in a manner that is inconsistent with our existing data management practices or the features of our services and platform capabilities. Any failure or perceived failure by us, or any third parties with which we do business, to comply with our posted privacy policies, changing consumer expectations, evolving laws, rules and regulations, industry standards, or contractual obligations to which we or such third parties are or may become subject, may result in actions or other claims against us by governmental entities or private actors, the expenditure of substantial costs, time and other resources or the incurrence of significant fines, penalties or other liabilities. In addition, any such action, particularly to the extent we were found to be guilty of violations or otherwise liable for damages, would damage our reputation and adversely affect our business, financial condition and results of operations.

We cannot yet fully determine the impact these or future laws, rules, regulations and industry standards may have on our business or operations. Any such laws, rules, regulations and industry standards may be inconsistent among different jurisdictions, subject to differing interpretations or may conflict with our current or future practices. Additionally, our customers may be subject to different privacy laws, rules and legislation, which may mean that they require us to be bound by varying contractual requirements applicable to certain other jurisdictions. Adherence to such contractual requirements may impact our collection, use, processing, storage, sharing and disclosure of various types of information including financial information and other personal information, and may mean we become bound by, or voluntarily comply with, self-regulatory or other industry standards relating to these matters that may further change as laws, rules and regulations evolve. Complying with these requirements and changing our policies and practices may be onerous and costly, and we may not be able to respond quickly or effectively to regulatory, legislative and other developments. These changes may in turn impair our ability to offer our existing or planned features, products and services and/or increase our cost of doing business. As we expand our customer base, these requirements may vary from customer to customer, further increasing the cost of compliance and doing business.

Various foreign countries also have, or are developing, laws governing the collection, use, disclosure, security, and cross-border transmission of personal information. The legislative and regulatory landscape for privacy and data protection continues to evolve, and there has been an increasing amount of focus on privacy and data protection issues with the potential to affect our business. For example, privacy requirements in the EU govern the transfer of personal information from the European Economic Area to the United States. While we continue to address the implications of changes to the EU data privacy regulations, the area remains an evolving landscape with new regulations coming into effect and continued legal challenges and our efforts to comply with the evolving data protection rules may be unsuccessful. Failure to comply with laws regarding data protection would expose us to risk of enforcement actions taken by data protection authorities in the EU and the potential for significant penalties if we are found to be non-compliant. Similarly, failure to comply with federal and state laws in the United States regarding privacy and security of personal information could expose us to penalties under such laws. Even if we are not determined to have violated these laws, government investigations into these issues typically require the expenditure of significant resources and generate negative publicity, which could harm our business.

30

Risks Related to Our Products and Technology

Risks Related to Our Intellectual Property

If we are unable to obtain or maintain our intellectual property, we may not be able to succeed commercially.

We endeavor to obtain and maintain trade secrets and, to a lesser extent with respect to the products that currently account for a majority of our revenue, patent protection when available in order to protect our products and processes from unauthorized use and to produce a financial return consistent with the significant time and expense required to bring our products to market. Our success will depend, in part, on our ability to:

We consider trade secrets, know-how and other forms of market protection to be among the most important elements of our proprietary position, in particular, as it relates to the products that currently account for a majority of our revenue. We also own or have exclusive rights to a number of U.S. patents and U.S. pending patent applications as well as corresponding foreign patents and patent applications. We continue to actively and selectively pursue patent protection and seek to expand our patent estate, particularly for our products currently in development, and we cannot be sure that any patent applications that we will file in the future or that any currently pending applications will be issued on a timely basis, if ever. We cannot be certain that we were the first to make the inventions covered by each of our pending patent applications or that we were the first to file patent applications for such inventions. Even if patents are issued, the degree of protection afforded by such patents will depend upon the:

The patent position of life sciences companies is often highly uncertain and usually involves complex legal and scientific questions. Patents that may be granted to us in certain foreign countries may be subject to opposition proceedings brought by third parties or result in suits by us, which may be costly and result in adverse consequences for us.

In some cases, litigation or other proceedings may be necessary to assert claims of infringement, to enforce patents issued to us or our licensors, to protect trade secrets, know-how or other intellectual property rights we own or to determine the scope and validity of the proprietary rights of third parties. Such litigation could result in substantial costs to us and diversion of our resources. An adverse outcome in any such litigation or proceeding could have a material adverse effect on our business, financial condition and results of operations. If our competitors prepare and file patent applications in the United States that claim technology also claimed by us, we may be required to participate in interference proceedings declared by the U.S. Patent and Trademark Office to determine priority of invention, which would result in substantial costs to us.

While one of our U.S. patents covering recombinant Protein A had its term adjusted to expire in 2028, our other U.S. patents covering recombinant Protein A have expired, and as a result, we may face increased competition, which could harm our results of operations, financial condition, cash flow and future prospects.

Other companies could begin manufacturing and selling native or some of the commercial forms of recombinant Protein A in the United States and may directly compete with us on certain Protein A products. This may induce us to sell Protein A at lower prices and may erode our market share, which could adversely affect our results of operations, financial condition, cash flow and future prospects.

31

Our freedom to develop our products may be challenged by others, and we may have to engage in litigation to determine the scope and validity of competitors’ patents and proprietary rights, which, if we do not prevail, could harm our business, results of operations, financial condition, cash flow and future prospects.

There has been substantial litigation and other proceedings regarding the complex patent and other intellectual property rights in the life sciences industry. We have been a party to, and in the future may become a party to, patent litigation or other proceedings regarding intellectual property rights.

We may become involved in patent litigation or other intellectual property proceedings, including the following situations:

We may initiate litigation or other proceedings against third parties to seek to invalidate the patents held by such third parties or to obtain a judgment that our products or services do not infringe on such third parties’ patents.

The cost to us of any patent litigation or other proceeding, even if resolved in our favor, could be substantial. Some of our competitors may be able to sustain the cost of such litigation or proceedings more effectively than we can because of their substantially greater financial resources. If a patent litigation or other intellectual property proceeding is resolved in a way that is unfavorable to us, we or our collaborative or strategic partners may be enjoined from manufacturing or selling our products and services without a license from the other party and be held liable for significant damages. The failure to obtain any required license on commercially acceptable terms or at all may harm our business, results of operations, financial condition, cash flow and future prospects.

Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our ability to compete in the marketplace. Patent litigation and other proceedings may also absorb significant management time, attention and resources.

Risks Related to Our Products

The market may not be receptive to our new bioprocessing products upon their introduction.

We expect a portion of our future revenue growth to come from introducing new bioprocessing products, including line extensions and new features for our OPUS® disposable chromatography columns, our XCell ATF system, our SIUS® tangential flow filtration (“TFF”) cassettes, our Spectrum® hollow fiber modules TFF line of cassettes and our growth factors. The commercial success of all of our products will depend upon their acceptance by the life science and biopharmaceutical industries. Many of the bioprocessing products that we are developing are based upon new technologies or approaches. As a result, there can be no assurance that these new products, even if successfully developed and introduced, will be accepted by customers. If customers do not adopt our new products and technologies, our results of operations may suffer and, as a result, the market price of our common stock may decline.

Our products are subject to quality control requirements.

Whether a product is produced by us or purchased from outside suppliers, it is subjected to quality control procedures, including the verification of porosity and with certain products, the complete validation for good manufacturing practices, U.S. Food and Drug Administration, CE and ISO 2001 compliance, prior to final packaging. Quality control is performed by a staff of technicians utilizing calibrated equipment. In the event we, or our manufacturers, produce products that fail to comply with required quality standards, it may incur delays in fulfilling orders, write-downs, damage to our reputation and damages resulting from product liability claims.

32

If our products do not perform as expected or the reliability of the technology on which our products are based is questioned, we could experience lost revenue, delayed or reduced market acceptance of our products, increased costs and damage to our reputation.

Our success depends on the market’s confidence that we can provide reliable, high-quality bioprocessing products. We believe that customers in our target markets are likely to be particularly sensitive to product defects and errors. Our reputation and the public image of our products and technologies may be impaired if our products fail to perform as expected. Although our products are tested prior to shipment, defects or errors could nonetheless occur in our products. Furthermore, the Protein A that we manufacture is subsequently incorporated into products that are sold by other life sciences companies and we have no control over the manufacture and production of those products. In the future, if our products experience, or are perceived to experience, a material defect or error, this could result in loss or delay of revenues, delayed market acceptance, damaged reputation, diversion of development resources, legal claims, increased insurance costs or increased service and warranty costs, any of which could harm our business. Such defects or errors could also narrow the scope of the use of our products, which could hinder our success in the market. Even after any underlying concerns or problems are resolved, any lingering concerns in our target market regarding our technology or any manufacturing defects or performance errors in our products could continue to result in lost revenue, delayed market acceptance, damaged reputation, increased service and warranty costs and claims against us.

Risks Related to Litigation

We may become involved in litigation or other proceedings with collaborative partners, which may be time consuming, costly and could result in delays in our development and commercialization efforts.

In connection with the Company’s decision to focus its efforts on the growth of its core bioprocessing business, we sought development and commercialization partnerships for our remaining portfolio of clinical stage assets. Any disputes with such partners that lead to litigation or similar proceedings may result in us incurring legal expenses, as well as facing potential legal liability. Such disputes, litigation or other proceedings are also time-consuming and may cause delays in our development and commercialization efforts. If we fail to resolve these disputes quickly and with terms that are no less favorable to us than the current terms of the arrangements, our business, results of operations, financial condition, cash flow and future prospects may be harmed.

We may become subject to litigation, which could result in substantial costs and divert management’s attention and resources from our business.

From time to time, we may become involved in litigation or other legal proceedings relating to claims arising from the ordinary course of business. Litigation is subject to inherent risks and uncertainties that may cause actual results to differ materially from our expectations. If we receive an adverse judgment in any litigation, we could be required to pay substantial damages. With or without merit, litigation can be complex, can extend for a protracted period of time, can be very expensive and the expense can be unpredictable. Litigation initiated by us could also result in counterclaims against us, which could increase the costs associated with the litigation and result in our payment of damages or other judgments against us. In addition, litigation, and any related publicity, may divert the efforts and attention of some of our management and key personnel, which could adversely affect our business.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

33

ITEM 2. PROPERTIES

Our material office and manufacturing leases are detailed below:

During the year ended December 31, 2021, we incurred total rental costs for all facilities of $17.0 million.

ITEM 3. LEGAL PROCEEDINGS

From time to time, we may be subject to legal proceedings and claims in the ordinary course of business. We are not currently aware of any such proceedings or claims that we believe will have, individually or in the aggregate, a material adverse effect on our business, financial condition or results of operations.

34

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

35

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information for Common Stock

Our common stock is traded on the Nasdaq Global Select Market under the symbol “RGEN.”

Stockholders and Dividends

As of February 14, 2022, there were 284 stockholders of record of our common stock. We have not paid any dividends since our inception and do not intend to pay any dividends on our common stock in the foreseeable future. We anticipate that we will retain all earnings, if any, to support our operations. Any future determination as to the payment of dividends will be at the sole discretion of our Board of Directors and will depend on our financial condition, results of operations, capital requirements and other factors our Board of Directors deems relevant.

Equity Compensation Plan Information

The following table sets forth information as of December 31, 2021 regarding shares of common stock that may be issued under the Company’s equity compensation plans, consisting of the Second Amended and Restated 2001 Repligen Corporation Stock Plan, the Amended and Restated 2012 Stock Option and Incentive Plan and the 2018 Stock Option and Incentive Plan.

Stock Performance Graph

The graph below matches Repligen Corporation’s cumulative 5-year total shareholder return on common stock with the cumulative total returns of the Nasdaq Composite index, the Nasdaq Pharmaceutical index, and the Nasdaq Biotechnology index. The graph tracks the performance of a $100 investment in our common stock and in each index (with the reinvestment of all dividends) from December 31, 2016 to December 31, 2021. The comparisons shown in the graph below are based upon historical data. We caution that the stock price performance shown in the graph below is not necessarily indicative of, nor is it intended to forecast, the potential future performance of our common stock.

36

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*

Among Repligen Corporation, the Nasdaq Composite Index,

the Nasdaq Pharmaceutical Index and the Nasdaq Biotechnology Index

Issuer Purchases of Equity Securities

In June 2008, the Board of Directors authorized a program to repurchase up to 1.25 million shares of our common stock to be repurchased at the discretion of management from time to time in the open market or through privately negotiated transactions. The repurchase program has no set expiration date and may be suspended or discontinued at any time. We did not repurchase any shares of common stock during the year ended December 31, 2021. In prior years, we repurchased a total of 592,827 shares, leaving 657,173 shares remaining under this authorization.

ITEM 6. RESERVED

37

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Information pertaining to fiscal year 2019 was included in the Company’s Annual Report on Form 10-K (“Form 10-K”) for the year ended December 31, 2020 on pages 39 through 57 under Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” which was filed with the SEC on February 24, 2021.

Repligen and its subsidiaries, collectively doing business as Repligen Corporation (“Repligen”, “we”, “our”, or “the Company”) is a global life sciences company that develops and commercializes highly innovated bioprocessing technology and systems that increase efficiencies and flexibility in the process of manufacturing biological drugs.

As the overall market for biologics continues to grow and expand, our customers – primarily large biopharmaceutical companies and contract development and manufacturing organizations – face critical production cost, capacity, quality and time pressures. Built to address these concerns, our products help set new standards for the way biologics are manufactured. We are committed to inspiring advances in bioprocessing as a trusted partner in the production of critical biologic drugs – including monoclonal antibodies (“mAbs”), recombinant proteins, vaccines and cell and gene therapies ("C&GT") – that are improving human health worldwide. For more information regarding our business, products and acquisitions, see above sections in Part I entitled “Overview”, “Our Products”, “2021 Acquisitions”, “2020 Acquisitions”, “2019 Acquisition” and “Our Market Opportunity”.

COVID-19 Pandemic

Our global operations have been and continue to be affected by the ongoing global pandemic of a novel strain of coronavirus (“COVID-19”) and the resulting volatility and uncertainty it has caused in the United States and international markets. During the year ended December 31, 2021, many businesses and countries, including the United States, continued applying preventative and precautionary measures designed to mitigate the spread of the virus and its variants including government orders and other restrictions on the conduct of business operations.

In response to COVID-19, we enacted safety measures, including social distancing protocols, encouraging employees to work from home when possible, suspending non-essential work travel, frequently disinfecting our workspaces and providing appropriate personal protective equipment to employees who are physically present at our facilities. As COVID-19 conditions improved, we began implementing a phased reopening process (which we have since reversed in response to the identification of COVID-19 variants), encouraged our employees to receive COVID-19 vaccinations and COVID-19 booster shots as they become available. We will continue to implement appropriate safety measures until COVID-19 is contained. We may take further actions and adjust our reopening process as government authorities require or recommend or as we determine to be in the best interests of our employees, customers, partners and suppliers.

COVID-19 continues to be dynamic, and near-term challenges across the economy remain. The ongoing effects of COVID-19 remain difficult to predict due to numerous uncertainties, including the severity, duration and resurgence of the outbreak, new variants, the effectiveness of health and safety measures including vaccines, the pace and strength of the economic recovery, and supply chain pressures, among others. We will continue to actively monitor the effects of COVID-19 and will continue to take appropriate steps to mitigate the impacts to our employees and on our business results.

Critical Accounting Policies and Estimates

While our significant accounting policies are more fully described in the notes to our consolidated financial statements, we have identified the policies and estimates below as being critical to our business operations and the understanding of our results of operations. These policies require management’s most difficult, subjective or complex judgements, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. The impact of and any associated risks related to these policies on our business operations are discussed throughout “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” specifically in the “Results of Operations” section, where such policies affect our reported and expected financial results. Although we believe that our estimates, assumptions, and judgements are reasonable, they are based upon information presently available. Actual results may differ significantly from these estimates under different assumptions, judgments, or conditions.

38

Revenue recognition

We generate revenue from the sale of bioprocessing products, equipment devices, and related consumables used with these equipment devices to customers in the life science and biopharmaceutical industries. Under Accounting Standards Codification No. (“ASC”) 606, “Revenue from Contracts with Customers,” revenue is recognized when, or as, obligations under the terms of a contract are satisfied, which occurs when control of the promised products or services is transferred to customers. Revenue is measured as the amount of consideration the Company expects to receive in exchange for transferring products or services to a customer (“transaction price”). To the extent the transaction price includes variable consideration, the Company estimates the amount of variable consideration that should be included in the transaction price utilizing the expected value method or the most likely amount method, depending on the facts and circumstances relative to the contract. Variable consideration is included in the transaction price if, in the Company’s judgment, it is probable that a significant future reversal of cumulative revenue under the contract will not occur. Estimates of variable consideration and determination of whether to include estimated amounts in the transaction price are based largely on an assessment of the Company’s anticipated performance and all information (historical, current and forecasted) that is reasonably available. Sales, value add, and other taxes collected on behalf of third parties are excluded from revenue.

When determining the transaction price of a contract, an adjustment is made if payment from a customer occurs either significantly before or significantly after performance, resulting in a significant financing component. Applying the practical expedient in paragraph 606-10-32-18, the Company does not assess whether a significant financing component exists if the period between when the Company performs its obligations under the contract and when the customer pays is one year or less. None of the Company’s contracts contained a significant financing component as of December 31, 2021.

Contracts with customers may contain multiple performance obligations. For such arrangements, the transaction price is allocated to each performance obligation based on the estimated relative standalone selling prices of the promised products or services underlying each performance obligation. The Company determines standalone selling prices based on the price at which the performance obligation is sold separately. If the standalone selling price is not observable through past transactions, the Company estimates the standalone selling price taking into account available information such as market conditions and internally approved pricing guidelines related to the performance obligations.

The Company recognizes product revenue under the terms of each customer agreement upon transfer of control to the customer, which occurs at a point in time.

Allowance for credit losses

We evaluate our global accounts receivable through a continuous process of assessing our portfolio on an individual customer and overall basis. This process consists of a thorough review of historical collection experience, current aging status of the customer accounts, financial condition of our customers, and whether the receivables involve retainages. We also consider the economic environment of our customers, both from a marketplace and geographic perspective, in evaluating the need for an allowance. Based on our review of these factors, we establish or adjust allowances for specific customers. Credit losses can vary substantially over time and the process involves judgment and estimation that require a number of assumptions about matters that are uncertain. Accordingly, our results of operations can be affected by adjustments to the allowance due to actual write-offs that differ from estimated amounts. See Note 7, “Credit Losses,” to our consolidated financial statements included in this report for more information.

Inventories

We value inventory at cost or, if lower, net realizable value, using the first-in, first-out method. We review our inventory at least quarterly and record a provision for excess and obsolete inventory based on our estimates of expected sales volume, production capacity and expiration dates of raw materials, work-in-process and finished products. We write down inventory that has become obsolete, inventory that has a cost basis in excess of its expected net realizable value, and inventory in excess of expected requirements to cost of product revenue. Manufacturing of bioprocessing finished goods is done to order and tested for quality specifications prior to shipment.

A change in the estimated timing or amount of demand for our products could result in additional provisions for excess inventory quantities on hand. Any significant unanticipated changes in demand or unexpected quality failures could have a significant impact on

39

the value of inventory and reported operating results. During all periods presented in the accompanying consolidated financial statements, there have been no material adjustments related to a revised estimate of inventory valuations.

Business combinations

Total consideration transferred for acquisitions is allocated to the tangible and intangible assets acquired and liabilities assumed, if any, based on their fair values at the dates of acquisition. This purchase price allocation process requires management to make significant estimates and assumptions with respect to intangible assets and deferred revenue obligations. The fair value of identifiable intangible assets is based on detailed valuations that use information and assumptions determined by management. Any excess of purchase price over the fair value of the net tangible and intangible assets acquired is allocated to goodwill. While we use our best estimates and assumptions to accurately value assets acquired and liabilities assumed at the acquisition date as well as any contingent consideration, where applicable, our estimates are inherently uncertain and subject to refinement. As a result, during the measurement period, which may be up to one year from the acquisition date, we record adjustments to the assets acquired and liabilities assumed with the corresponding offset to goodwill. Upon conclusion of the measurement period or final determination of the values of assets acquired or liabilities assumed, whichever comes first, any subsequent adjustments are recorded to our consolidated statements of comprehensive income. The Company estimates the fair value of the contingent consideration earnouts using the Monte Carlo Simulation and updates the fair value of the contingent consideration at each reporting period based on the estimated probability of achieving the earnout targets and applying a discount rate that captures the risk associated with the expected contingent payments. To the extent that our estimates change in the future regarding the likelihood of achieving these targets, we may need to record material adjustments to our accrued contingent consideration. Such changes in the fair value of contingent consideration are recorded as contingent consideration expense in our consolidated statements of comprehensive income. For the year ended December 31, 2021, we recorded $5.9 million of contingent consideration expense related to the change in estimated contingent consideration obligations from the acquisition of Avitide, Inc. ("Avitide") in September 2021.

We use the income approach to determine the fair value of certain identifiable intangible assets including customer relationships and developed technology. This approach determines fair value by estimating after-tax cash flows attributable to these assets over their respective useful lives and then discounting these after-tax cash flows back to a present value. We base our assumptions on estimates of future cash flows, expected growth rates, expected trends in technology, etc. We base the discount rates used to arrive at a present value as of the date of acquisition on the time value of money and certain industry-specific risk factors. We believe the estimated purchased customer relationships, developed technologies, trademark/tradename, patents, non-competition agreements and in-process research and development amounts so determined represent the fair value at the date of acquisition and do not exceed the amount a third-party would pay for the assets.

Intangible assets and goodwill

Intangible assets

Intangible assets with a definite life are amortized over their useful lives using the straight-line method and the amortization expense is recorded within cost of product revenue, research and development and selling, general and administrative expense in the consolidated statements of comprehensive income. Intangible assets and their related useful lives are reviewed at least annually to determine if any adverse conditions exist, that would indicate the carrying value of these assets may not be recoverable. More frequent impairment assessments are conducted if certain conditions exist, including a change in the competitive landscape, any internal decisions to pursue new or different technology strategies, a loss of a significant customer, or a significant change in the marketplace, including changes in the prices paid for the Company’s products or changes in the size of the market for the Company’s products. If impairment indicators are present, the Company determines whether the underlying intangible asset is recoverable through estimated future undiscounted cash flows. If the asset is not found to be recoverable, it is written down to the estimated fair value of the asset based on the sum of the future discounted cash flows expected to result from the use and disposition of the asset. If the estimate of an intangible asset’s remaining useful life is changed, the remaining carrying amount of the intangible asset is amortized prospectively over the revised remaining useful life. The Company continues to believe that its definite-lived intangible assets are recoverable at December 31, 2021.

Indefinite-lived intangible assets are tested for impairment at least annually. There has been no impairment of our intangible assets for the periods presented.

40

Goodwill

We test goodwill for impairment on an annual basis and between annual tests if events and circumstances indicate it is more likely than not that the fair value of a reporting unit is less than its carrying value. Events that would indicate impairment and trigger an interim impairment assessment include, but are not limited to, current economic and market conditions, including a decline in market capitalization, a significant adverse change in legal factors, business climate or operational performance of the business, and an adverse action or assessment by a regulator. Goodwill is tested for impairment as of December 31st of each year, or more frequently as warranted by events or changes in circumstances mentioned above. Accounting guidance also permits an optional qualitative assessment for goodwill to determine whether it is more likely than not that the carrying value of a reporting unit exceeds its fair value. If, after this qualitative assessment, we determine that it is not more likely than not that the fair value of a reporting unit is less than its carrying amount, then no further quantitative testing would be necessary. A quantitative assessment is performed if the qualitative assessment results in a more likely than not determination or if a qualitative assessment is not performed. The quantitative assessment considers whether the carrying amount of a reporting unit exceeds its fair value, in which case an impairment charge is recorded to the extent the reporting unit’s carrying value exceeds its fair value.

The Company operates as one reporting unit. The fair value of the reporting unit is determined using both an income approach and market approach. Our income approach model used for our reporting unit valuation is consistent with that used for our December 31, 2019 goodwill impairment valuation noted above, except that cash flows from the entire business enterprise were used for the reporting unit valuation. Our market approach model estimated the fair value of the reporting unit based on market prices paid in actual precedent transactions of similar businesses and market multiples of guideline public companies. As a result of our 2020 quantitative assessment, we concluded that goodwill was not impaired as of December 31, 2020. During the qualitative assessment of the Company’s one reporting unit during the 2021 goodwill impairment testing, it was determined that it was not more likely than not that its fair value was less than its carrying amount. As such, a quantitative impairment assessment was not required as of December 31, 2021. If an event occurs or circumstances change that would more likely than not reduce the fair value of its reporting unit below its carrying value, the Company will evaluate its goodwill for impairment between annual tests.

Accrued liabilities

We estimate accrued liabilities by identifying services performed on our behalf, estimating the level of service performed and determining the associated cost incurred for such service as of each balance sheet date. For example, we would accrue for professional and consulting fees incurred with law firms, audit and accounting service providers and other third-party consultants. These expenses are determined by either requesting those service providers to estimate unbilled services at each reporting date for services incurred or tracking costs incurred by service providers under fixed fee arrangements.

We have processes in place to estimate the appropriate amounts to record for accrued liabilities, which principally involve the applicable personnel reviewing the services provided. In the event that we do not identify certain costs that have begun to be incurred or we under or over-estimate the level of services performed or the costs of such services, the reported expenses for that period may be too low or too high. The date on which certain services commence, the level of services performed on or before a given date, and the cost of such services often require the exercise of judgment. We make these judgments based upon the facts and circumstances known at the date of the financial statements.

A change in the estimated cost or volume of services provided could result in additional accrued liabilities. Any significant unanticipated changes in such estimates could have a significant impact on our accrued liabilities and reported operating results. There have been no material adjustments to our accrued liabilities in any of the periods presented in the accompanying consolidated financial statements.

Debt accounting

Our short-term debt balance is related to our 0.375% Convertible Senior Notes due 2024 (the “2019 Notes”), which were issued in July 2019, and are carried at their principal amount less unamortized debt discount. We account for our convertible notes as separate liability and equity components. We estimate the carrying amount of the liability component by estimating the fair value of a similar liability that does not have an associated conversion feature. The Company allocates transaction costs related to the issuance of convertible notes to the liability and equity components using the same proportions as the initial carrying value of the convertible notes. The carrying value of the equity component is calculated by deducting the carrying value of the liability component from the

41

principal amount of the convertible notes as a whole. The difference represents a debt discount that is amortized to interest expense in our consolidated statement of comprehensive income over the term of the convertible notes using the effective interest rate method. We assess the equity classification of the cash conversion feature quarterly. We allocated transaction costs related to the issuance of the 2019 Notes to the liability and equity components using the same proportions as the initial carrying value of the 2019 Notes. In 2022, the Company will adopt Accounting Standards Update No. ("ASU") 2020-06, "Debt - Debt with Conversion and Other Options (Subtopic 470-20) and Derivatives and Hedging - Contracts in Entity's Own Equity (Subtopic 815-40)." This standard eliminates the liability and equity separation model for convertible instruments with a cash conversion feature. As a result, after adoption, the Company will no longer separately present in equity an embedded conversion feature for the 2019 Notes. Additionally, the embedded conversion feature will no longer be amortized into income as interest expense over the life of the 2019 Notes. The Company is currently evaluating the impact of the adoption of ASU 2020-06 on the Company's consolidated financial statements.

During the fourth quarter of 2021, the closing price of the Company’s common stock exceeded 130% of the conversion price of the 2019 Notes for more than 20 trading days of the last 30 consecutive trading days of the quarter. As a result, the 2019 Notes are convertible at the option of the holders of the 2019 Notes during the first quarter of 2022, the quarter immediately following the quarter when the conditions are met, as stated in the terms of the 2019 Notes. Expecting to continue meeting these terms, the Company continues to classify the carrying value of the 2019 Notes as current liabilities on the Company’s balance sheet as of December 31, 2021. This classification is reassessed each quarter.

Stock-based compensation

We use the Black-Scholes option pricing model to calculate the fair value of stock option awards on the grant date. The expected term of options granted represents the period of time for which the options are expected to be outstanding and is derived from our historical stock option exercise experience and option expiration data. For purposes of estimating the expected term, we have aggregated all individual option awards into one group, as we do not expect substantial differences in exercise behavior among our employees. The expected volatility is a measure of the amount by which our stock price is expected to fluctuate during the expected term of options granted. We determined the expected volatility based upon the historical volatility of our common stock over a period commensurate with the option’s expected term. The risk-free interest rate is the implied yield available on U.S. Treasury zero-coupon issues with a remaining term equal to the option’s expected term on the grant date. We have never declared or paid any cash dividends on any of our capital stock and do not expect to do so in the foreseeable future. Accordingly, we use an expected dividend yield of zero to calculate the grant-date fair value of a stock option.

The fair value for stock units, which include restricted stock units and performance stock units, is calculated using the closing price of the Company’s common stock on the date of grant. We recognize compensation expense on awards that vest based on service conditions on a straight-line basis over the requisite service period based upon the number of options that are ultimately expected to vest, and accordingly, such compensation expense has been adjusted by an amount of estimated forfeitures. We recognize compensation expense on awards that vest based on performance conditions following our assessment of the probability that the performance condition will be achieved over the service period. Forfeitures represent only the unvested portion of a surrendered option. Forfeitures are estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. Based on an analysis of historical data, we have calculated an 8% annual forfeiture rate for non-executive level employees, a 3% annual forfeiture rate for executive level employees, and a 0% forfeiture rate for non-employee members of the Board of Directors, which we believe are reasonable assumptions to estimate forfeitures. However, the estimation of forfeitures requires significant judgment and, to the extent actual results or updated estimates differ from our current estimates, a cumulative adjustment to stock-based compensation expense will be recorded in the period estimates are revised.

For the years ended December 31, 2021, 2020 and 2019, we recorded stock-based compensation expense of $27.5 million, $17.0 million and $12.8 million, respectively, for share-based awards granted under all of the Company’s stock plans.

As of December 31, 2021, there was $59.2 million of total unrecognized compensation cost related to unvested share-based awards. This cost is expected to be recognized over a weighted average remaining requisite service period of 3.16 years. We expect 1,953,733 unvested options and stock units to vest over the next five years.

42

Income taxes

Deferred taxes are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates in effect in the years in which the differences are expected to reverse. Valuation allowances are provided, if, based upon the weight of available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. We account for uncertain tax positions using a “more-likely-than-not” threshold for recognizing and resolving uncertain tax positions. The evaluation of uncertain tax positions is based on factors including, but not limited to, changes in tax law, the measurement of tax positions taken or expected to be taken in tax returns, the effective settlement of matters subject to audit, new audit activity and changes in facts or circumstances related to a tax position. We evaluate our tax position on a quarterly basis. We also accrue for potential interest and penalties related to unrecognized tax benefits in income tax expense.

In addition, we are subject to the continual examination of our income tax returns by the U.S. Internal Revenue Service (“IRS”) and other domestic and foreign tax authorities. We expect future examinations to focus on our intercompany transfer pricing practices as well as other matters. We regularly assess the likelihood of outcomes resulting from these examinations to determine the adequacy of our provision for income taxes and have reserved for potential adjustments that may result from such examinations. We believe such estimates to be reasonable; however, the final determination of any of these examinations could significantly impact the amounts provided for income taxes in our consolidated financial statements.

Recent accounting standards update

See Note 2, “Summary of Significant Accounting Policies – Recent Accounting Standards Updates,” to our consolidated financial statements included in this report for more information.

Results of Operations

The following discussion of the financial condition and results of operations should be read in conjunction with the accompanying consolidated financial statements and the related footnotes thereto.

Revenues

Total revenues for years ended December 31, 2021, 2020 and 2019 were comprised of the following:

Product revenues

Since 2016, we have been increasingly focused on selling our products directly to customers in the pharmaceutical industry and to our contract manufacturers. These direct sales have increased to 83.1% of our total product revenue during 2021 from 78.0% of our total product revenue in 2020. We expect that direct sales will continue to account for an increasing percentage of our product revenues, as the largest customer of our protein products diversified its supply chain in 2020. Sales of our bioprocessing products can be impacted by the timing of large-scale production orders and the regulatory approvals for such antibodies, which may result in significant quarterly fluctuations.

43

Product revenues were comprised of the following:

Revenue from our filtration products includes the sale of our XCell ATF® systems and consumables, KrosFlo® filtration products, SIUS® filtration products, the fluid management products offered by BioFlex, which we acquired on December 16, 2021, the hollow fiber ("HF") membrane technology offered by Polymem, which we acquired on July 1, 2021, the silicone-molded products offered by EMT, which we acquired on July 13, 2020 and the products offered by NMS and ARTeSYN, which were both acquired during the fourth quarter of 2020. Revenue from our chromatography products includes the sale of our OPUS chromatography columns, chromatography resins and ELISA test kits as well as sales of products offered by Avitide, which we acquired on September 20, 2021. Revenue from protein products includes the sale of our Protein A ligands and cell culture growth factors. Revenue from our process analytics products includes the sale of our SoloVPE, FlowVPE and FlowVPX systems, consumables and service. Other revenue primarily consists of revenue from the sale of our operating room products to hospitals as well as freight revenue.

For 2021, product revenue increased by $304.2 million, or 83.1%, as compared to 2020 with exceptional robust demand for our filtration, chromatography, process analytics and proteins products. The increase is due to the continued adoption of our products by key bioprocessing customers across all our key product lines. Beginning in the second quarter of 2020, we experienced an increase in overall sales as a result of accelerated demand across all our franchises due to the critical needs of customers working on COVID-19 vaccines and therapeutics. In addition, during 2021 we saw an increase in demand for C&GT and monoclonal antibody manufacturing. Revenue for 2021 also increased due to revenue from Polymem, Avitide, BioFlex and NTM, which we acquired during the second half of 2021. During 2021, we also include twelve months of revenue from our acquisitions executed in the second half of 2020, EMT, NMS and ARTeSYN, for which there was only a partial year of revenue commencing from the respective acquisition dates in 2020, through December 31, 2020.

Sales of our bioprocessing products are impacted by the timing of orders, development efforts at our customers or end-users and regulatory approvals for biologics that incorporate our products, which may result in significant quarterly fluctuations. Such quarterly fluctuations are expected, but they may not be predictive of future revenue or otherwise indicate a trend.

For 2020, product revenue increased by $96.0 million, or 35.6%, as compared to 2019. The increase was due to the continued adoption of our products by key bioprocessing customers across all our key product lines mentioned above. Beginning in the second quarter of 2020, we experienced an increase in overall sales as a result of accelerated demand, which was from broad-based covering mAb, C&GT and COVID-19 customers working on vaccines and therapeutics. In 2020, we also had good performance from our acquisitions executed in 2019 and 2020. C Technologies revenue increased by $16.9 million in 2020, compared to 2019, as 2020

44

represented twelve months of ownership of C Technologies, which was acquired in May 2019, compared to only seven months of ownership in 2019. Finally, as a result of our acquisitions of EMT, NMS and ARTeSYN in the second half of 2020, revenue from our filtration products included $6.2 million of additional revenue.

Royalty revenues

Royalty revenues in 2021 and 2020 relate to royalties received from a third-party systems manufacturer associated with our OPUS chromatography columns. Royalty revenues are variable and are dependent on sales generated by our partner.

Costs and operating expenses

Total costs and operating expenses for the years ended December 31, 2021, 2020 and 2019 were comprised of the following:

Cost of product revenue

Cost of product revenue increased $122.6 million, or 78.3%, in 2021, as compared to 2020, due primarily to the increase in product revenue and costs associated with higher product volume. In addition, to support our rapid growth and increased demand for our products, we continue to invest in our manufacturing infrastructure through increased manufacturing headcount and increased occupancy costs. There was an approximately 84% increase in manufacturing headcount from December 31, 2020 to December 31, 2021, which resulted in higher employee-related costs. Our depreciation expense increased as manufacturing equipment was placed in service during 2021. The impact on cost of product revenue from our three acquisitions in 2021 was $7.4 million, which has also contributed to the increase in cost of product revenue as there were no comparable costs for these acquisitions in 2020.

Gross margin was 58.3% in 2021, as compared to 57.2% in 2020. The gross margin in 2021 included $2.1 million of amortization of inventory step-up associated with the Polymem Acquisition and ARTeSYN Acquisition and 2020 included $0.7 million of amortization of inventory step-up associated with the ARTeSYN Acquisition and the acquisition of EMT. Excluding the step-up amortization, gross margin for 2021 and 2020 was 58.7% and 57.4%, respectively. The increase in gross margin, excluding the inventory step-up amortization, in 2021, as compared to 2020, was due primarily to the increase in revenue mentioned above, and favorable product mix, partially offset by an increase in employee costs related to an increase in manufacturing headcount subsequent to December 31, 2020, an increase in occupancy costs due to added capacity in 2021 and an increase in depreciation expense mentioned above. Gross margins may fluctuate in future quarters based on expected production volume and product mix.

For 2020, cost of product revenue increased $37.5 million, or 31.5%, as compared to 2019, due primarily to the increase in product revenue and costs associated with higher product volume. An increase in manufacturing headcount resulted in higher employee-related costs in 2020, compared to 2019. Additional facility costs, including personal protection equipment purchased for essential manufacturing personnel on site to protect against COVID-19, were also incurred during 2020 for which there were no comparable amounts in 2019.

Gross margin was 57.2% in 2020, compared to 55.9% in 2019. The gross margin in 2020 included $0.7 million of amortization of inventory step-up associated with the EMT and ARTeSYN Acquisitions and the gross margin for 2019 included $1.5 million of amortization of inventory step-up associated with the C Technologies Acquisition in May 2019. Excluding the step-up amortization, gross margins in 2020 and 2019 were 57.4% and 56.5%, respectively. The increase in gross margins, excluding the inventory step-up amortization, in 2020, as compared to 2019, was due primarily to the increase in revenue mentioned above, and favorable product mix, partially offset by an increase in manufacturing headcount subsequent to December 31, 2019.

45

Research and development expenses

Research and development (“R&D”) expenses are related to bioprocessing products, which include personnel, supplies and other research expenses. Due to the size of the Company and the fact that these various programs share personnel and fixed costs, we do not track all of our expenses or allocate any fixed costs by program, and therefore, have not provided historical costs incurred by project.

R&D expenses increased $14.1 million, or 69.8%, during 2021, as compared to 2020. The increase was due to the addition of R&D expenses related to operations of Avitide, Polymem and ARTeSYN, from their respective acquisition dates to December 31, 2021, including a full year of costs related to ARTeSYN programs for which there were costs from one month in 2020. Additionally, R&D costs increased, due to a rise in R&D headcount and the ramp up of project spending for new product development during 2021.

R&D expenses increased $0.7 million, or 3.8% in 2020, as compared to 2019. The increase was primarily due to a $1.1 million increase in C Technologies R&D expenses. C Technologies was acquired on May 31, 2019. Therefore, only seven months of expenses were recognized in 2019, compared to a full 12 months in 2020. The increase was partially offset by a decrease in R&D spending on external projects, as certain R&D process development laboratories were not fully functional for most of 2020 due to COVID-19.

R&D expense also includes investments made to expand our proteins product offering through our development agreement with Navigo Proteins GmbH (“Navigo”). The Company invested $2.3 million in 2021, $0.9 million in 2020 and $1.0 million in 2019 in the form of milestone payments to Navigo.

We expect our R&D expenses in 2022 to modestly increase to support new product development.

Selling, general and administrative expenses

Selling, general and administrative (“SG&A”) expenses include the costs associated with selling our commercial products and costs required to support our marketing efforts, including legal, accounting, patent, shareholder services, amortization of intangible assets and other administrative functions.

During 2021, SG&A costs increased by $64.2 million, or 53.7%, as compared to 2020. The increase is partially due to the continued expansion of our customer-facing activities to drive sales of our bioprocessing products, and the continued buildout of our administrative infrastructure, primarily through increased headcount and increased occupancy costs as well as an increase in depreciation related to assets placed in service during the year, all to support expected future growth. Employee-related costs during 2021, as compared to the same periods in 2020, resulted from the increase in headcount period over period. These costs include stock-based compensation expense, which increased $9.1 million in 2021, as compared to 2020. In addition, SG&A costs increased in 2021, due to the addition of EMT, NMS and ARTeSYN in the second half of 2020 and the addition of Polymem, Avitide, BioFlex and NTM during the second half of 2021, for which there were no comparable costs in 2020.

For 2020, SG&A costs increased by $24.0 million, or 25.1%, as compared to 2019. The increase was partially due to the continued expansion of our customer-facing activities to drive sales of our bioprocessing products and the continued buildout of our administrative infrastructure, primarily through increased headcount, to support expected future growth. Stock-based compensation expense and other employee-related costs increased in 2020, as compared to 2019, resulting from an increase in headcount and higher share prices period over period. In addition, $4.2 million of the increase in SG&A costs for 2020 was related to the C Technologies operations, which was acquired in May 2019. C Technologies’ SG&A costs for 2020 include a full year of costs, compared to only seven months in 2019. With the acquisitions of EMT, NMS and ARTeSYN in 2020, an additional $2.2 million of SG&A costs were included in the consolidated results.

Contingent consideration expense

Contingent consideration expense represents the change in fair value of the contingent consideration obligation included in noncurrent contingent consideration on the consolidated balance sheet as of the end of each period. Re-measurement of the contingent consideration obligation is done each quarter and the carrying value of the obligation is adjusted to the current fair value through our consolidated statement of comprehensive income. We recorded an adjustment to the fair value of the contingent consideration obligation for the year ended December 31, 2021 of $5.9 million.

46

Other expenses, net

The table below provides detail regarding our other expenses, net:

Investment income

Investment income includes income earned on invested cash balances. The decrease of $1.6 million in 2021, as compared to 2020, is attributable to a decrease in interest rates on our invested cash balances and to a decrease in our average invested cash balances. In March 2020, in response to the outbreak of COVID-19 and to stay ahead of disruptions and economic slowdown, the Federal Reserve reduced federal funds rates to a range of 0.0% to 0.25%, which will continue to affect our investment income in future periods. We expect investment income to vary based on changes in the amount of funds invested and fluctuation of interest rates.

The decrease of $3.6 million in 2020, as compared to 2019, was also attributable to a decrease in interest rates on our invested cash balances. Higher average invested cash balances during 2020, as compared to 2019 due to the completion of a public offering and the issuance of our 2019 Notes during the third quarter of 2019, partially offset the decrease in interest rates mentioned above.

Loss on conversion of debt

The loss on conversion of debt in 2021 is a result of the settlement of the conversion of $11,000 aggregate principal of our 2019 Notes. We had no loss on conversion of debt in 2020.

The $5.7 million loss on conversion of debt for the year ended December 31, 2019 resulted from the settlement of our outstanding 2.125% Convertible Senior Notes due 2021 (the “2016 Notes”) in the third quarter of 2019. The loss represents the difference between (i) the fair value of the liability component and (ii) the sum of the carrying value of the debt component and any unamortized debt issuance costs at the time of settlement.

Interest expense

Interest expense in 2021 and 2020 is primarily from our 2019 Notes. Interest expense, which includes the amortization of debt issuance costs and contractual coupon interest, increased $0.6 million in 2021, as compared to 2020. This is a result of the decrease in the balance of debt issuance costs that are being amortized. As these costs decrease, the carrying value of the debt increases and interest calculated based on the carrying value increases as well.

Interest expense in 2020 was primarily from our 2019 Notes. In 2019, interest expense was from a combination of our 2016 Notes, which were settled during the third quarter of 2019 and our 2019 Notes. Interest expense increased $2.8 million in 2020, as compared to 2019 based on the increase in debt issued from $115.0 million for the 2016 Notes to $287.5 million for the 2019 Notes.

The amortization of debt issuance costs on the 2019 Notes was $11.5 million and $11.0 million in 2021 and 2020, respectively. Amortization of debt issuance costs on the 2019 Notes was $4.7 million in 2019. The amortization of the debt issuance costs on the 2016 Notes was $2.8 million in 2019.

Contractual coupon interest incurred on the 2019 Notes in 2021 and 2020 was $1.1 million in each year. Interest calculated based on the carrying value related to the 2019 Notes for 2019 was $0.5 million. Contractual coupon interest incurred on the 2016 Notes was

47

$1.3 million in 2019. Since the 2016 Notes were settled during July 2019, interest no longer accrued on the 2016 Notes subsequent to their settlement.

Other expenses, net

The change in other expenses, net in 2021, as compared to 2020, is primarily attributable to realized foreign currency losses related to amounts due from non-Swedish krona-based customers and vendors.

The change in other expenses during 2020, as compared to 2019, was primarily attributable to realized foreign currency losses related to amounts due from non-Swedish krona-based customers and vendors. In addition, $0.5 million was included in other expenses in 2019, which represents a bridge loan commitment fee incurred as part of the C Technologies Acquisition.

Income tax provision (benefit)

Income tax provision (benefit) for the years ended December 31, 2021, 2020 and 2019 was as follows:

For 2021, we recorded an income tax provision of $25.3 million. The effective tax rate in 2021 was 16.4% and is based upon the estimated income for the year ending December 31, 2021 and the composition of income in different jurisdictions. The increase in effective tax rates was primarily due to higher income before income taxes, lower windfall benefits recognized on stock option exercises and the vesting of stock units, partially offset by lower U.S. taxation of foreign earnings. Our effective tax rate for 2021 was lower than the U.S. statutory rate of 21% primarily due to business tax credits and windfall benefits on stock option exercises and the vesting of stock units.

In 2020, we recorded an income tax benefit of $0.7 million. Our effective tax rate in 2020 was (1.2%) and was based upon the estimated income for the year ending December 31, 2020 and the composition of income in different jurisdictions. Our effective tax rate in 2020 was lower than the U.S. statutory rate of 21% primarily due to windfall benefits on stock option exercises and the vesting of stock units.

For the year ended December 31, 2019, we recorded an income tax provision of approximately $4.7 million. Our effective tax rate was an income tax provision of 18.1% and was based upon the estimated taxable income for the year ending December 31, 2019 and the composition of the taxable income in different jurisdictions. Our effective tax rate was lower than the U.S. statutory rate of 21% due primarily to windfall benefits on stock option exercises and the vesting of restricted stock units and to deductions related to debt extinguishment.

Non-GAAP Financial Measures

We provide non-GAAP adjusted income from operations, non-GAAP adjusted net income and adjusted EBITDA as supplemental measures to GAAP measures regarding our operating performance. These financial measures exclude the impact of certain acquisition related items and, therefore, have not been calculated in accordance with GAAP. A detailed explanation and a reconciliation of each non-GAAP financial measures to its most comparable GAAP financial measures are described below.

We include this financial information because we believe these measures provide a more accurate comparison of our financial results between periods and more accurately reflect how management reviews its financial results. We excluded the impact of certain acquisition related items because we believe that the resulting charges do not accurately reflect the performance of our ongoing operations for the period in which such charges are incurred.

48

Non-GAAP adjusted income from operations

Non-GAAP adjusted income from operations is measured by taking income from operations as reported in accordance with GAAP and excluding acquisition and integration costs, inventory step-up charges, contingent consideration expense and intangible amortization booked through our consolidated statements of comprehensive income. The following is a reconciliation of income from operations in accordance with GAAP to non-GAAP adjusted income from operations for the years ended December 31, 2021 and 2020:

Non-GAAP adjusted net income

Non-GAAP adjusted net income is measured by taking net income as reported in accordance with GAAP and excluding acquisition and integration costs and related tax effects, inventory step-up charges, contingent consideration, intangible amortization and related tax effects, loss on conversion of debt and non-cash interest expense booked through our consolidated statements of comprehensive income. The following is a reconciliation of net income in accordance with GAAP to non-GAAP adjusted net income for the years ended December 31, 2021 and 2020:

* Note that earnings per share amounts may not add due to rounding.

49

Adjusted EBITDA

Adjusted EBITDA is measured by taking net income as reported in accordance with GAAP, excluding investment income, interest expense, taxes, depreciation and intangible amortization, and excluding acquisition and integration costs, inventory step-up charges, contingent consideration and loss on conversion of debt booked through our consolidated statements of comprehensive income. The following is a reconciliation of net income in accordance with GAAP to adjusted EBITDA for years ended December 31, 2021 and 2020:

Liquidity and Capital Resources

We have financed our operations primarily through revenues derived from product sales, the issuance of the 2016 Notes in May 2016 and our 2019 Notes in July 2019 and the issuance of common stock in our December 2020, July 2019 and May 2019 public offerings. Our revenue for the foreseeable future will primarily be limited to our bioprocessing product revenue.

At December 31, 2021, we had cash and cash equivalents of $603.8 million compared to cash and cash equivalents of $717.3 million at December 31, 2020. There were no restrictions on cash as of December 31, 2021.

On December 8, 2020, the Company completed a public offering in which 1,725,000 shares of its common stock, including the underwriters’ full exercise of an option to purchase up to an additional 225,000 shares, were sold to the public at a price of $181.00 per share. The total proceeds received by the Company from this offering, net of underwriting discounts and commissions and other estimated offering expenses payable by the Company, were approximately $297.8 million.

In 2021 we acquired three companies for an aggregate of $149.9 million in cash, net of cash acquired. In connection with the acquisitions, the Company has an obligation to pay up to $62.5 million (undiscounted) in contingent consideration earnout payments in cash over a three-year performance period beginning January 1, 2022 and ending December 31, 2024. See Note 2, “Fair Value Measurements,” and Note 4, “Acquisitions,” for additional information. In 2020, we acquired three companies for an aggregate of $175.0 million in cash, net of cash acquired. All obligations related to these acquisitions have been settled.

We acquired C Technologies on May 31, 2019 for $239.9 million in cash and shares of our common stock. The C Technologies Acquisition was funded through payment of approximately $195.0 million in cash and issuance of 779,221 unregistered shares of the Company’s common stock totaling $53.9 million.

On July 19, 2019, the Company completed a public offering in which 1,587,000 shares of its common stock, including the underwriters’ full exercise of an option to purchase an additional 207,000 shares, were sold to the public at a price of $87.00 per share for $131.1 million in net proceeds to the Company, after deducting underwriting discounts and commissions and other estimated offering expenses payable by the Company (the “July Stock Offering”).

50

On July 19, 2019, the Company issued $287.5 million aggregate principal amount of 2019 Notes, which includes the underwriters’ exercise in full of an option to purchase an additional $37.5 million aggregate principal amount of 2019 Notes (the “Notes Offering” and, together with the July Stock Offering, the “Offerings”). The net proceeds of the Notes Offering, after deducting underwriting discounts and commissions and other offering expenses payable by the Company, were $278.5 million. See Note 13, “Convertible Senior Notes,” included in this report for more information on this transaction.

On May 3, 2019, the Company completed a public offering in which 3,144,531 shares of its common stock, including the underwriters’ full exercise of an option to purchase up to an additional 410,156 shares, were sold to the public at a price of $64.00 per share. The total proceeds received by the Company from this offering, net of underwriting discounts and commissions and other estimated offering expenses payable by the Company, totaled approximately $189.6 million. Proceeds from this public offering were partially used to fund the C Technologies Acquisition on May 31, 2019.

During the fourth quarter of 2021, the closing price of the Company’s common stock exceeded 130% of the conversion price of the 2019 Notes for more than 20 trading days of the last 30 consecutive trading days of the quarter. As a result, the 2019 Notes are convertible at the option of the holders of the 2019 Notes during the first quarter of 2022 per the First Supplemental Indenture underlying the 2019 Notes. The 2019 Notes have a face value of $287.5 million and a carrying value of $255.3 million. The Company expects to continue meeting these terms and has again classified the carrying value of the 2019 Notes as current liabilities on the Company’s balance sheet as of December 31, 2021 and 2020. As of the date of this filing, the Company has received requests to convert $13,000 aggregate principal amount of 2019 Notes of which $11,000 have been settled and $2,000 still remain in the Observation Period (as defined by the First Supplemental Indenture dated as of December 31, 2021), which the Company will settle during the first quarter of 2022. We intend to pay or deliver, as the case may be, the settlement amount to be determined – paying the amount in excess of the aggregate principal portion of the converted notes in shares of our common stock.

In 2021, we had lease arrangements for certain equipment and facilities including corporate and manufacturing sites. As of December 31, 2021, the Company had fixed lease payment obligations of $110.8 million, with $8.3 million payable within 12 months. See Note 5, “Leases”, for additional information.

In 2021, we had other purchase obligations primarily consisting of purchase commitments with certain vendors and open purchase orders for the procurement of raw materials for manufacturing. As of December 31, 2021, the Company had other purchase obligations of $148.7 million, payable within 12 months.

Cash flows

Operating activities

For 2021, our operating activities provided cash of $119.0 million reflecting net income of $128.3 million and non-cash charges totaling $92.9 million primarily related to depreciation, amortization, inventory step-up amortization, contingent consideration expense, deferred income taxes, amortization of debt discount and issuance costs and stock-based compensation charges. An increase in accounts receivable consumed $46.5 million of cash and was primarily driven by the 83.1% year-to-date increase in total revenues. An increase in inventory manufactured of $89.8 million supports expected increases in future revenue and an increase in prepaid expenses, specifically insurance and taxes of $10.2 million. The increases in accounts receivable, prepaid expenses and inventory

51

manufactured are offset by an increase in accounts payable of $19.5 million, which is primarily due to increased inventory purchases to support customer orders, an increase in accrued liabilities of $23.2 million, which was due to an increase in the accrual for expected costs, taxes payable, and to a decrease in deferred revenue related to products shipped during the first half of 2021. The remaining net cash used in operating activities resulted from unfavorable changes in various other working capital accounts.

For 2020, our operating activities provided cash of $62.6 million reflecting net income of $59.9 million and non-cash charges totaling $51.3 million primarily related to depreciation, amortization, non-cash interest expense, deferred taxes and stock-based compensation charges. An increase in accounts receivable consumed $21.0 million of cash and was primarily driven by the 35.5% year-to-date increase in total revenues and an increase in inventory manufactured of $29.3 million to support expected continued growth in future revenues. In addition, $4.9 million was consumed for increases in prepaid expenses for annual software and network contracts, as well as the renewal of the Company’s global insurance policies. These were offset by an increase in accounts payable and accrued liabilities of $3.5 million due primarily to increased inventory purchases to support customer orders and year-end tax adjustments, offset by payment of acquisition-related bonuses for C Technologies during the second quarter of 2020. The remaining cash source of operating activities resulted from favorable changes in various other working capital accounts.

For 2019, our operating activities provided cash of $67.2 million reflecting net income of $21.4 million and non-cash charges totaling $46.9 million primarily related to depreciation, amortization, non-cash interest expense, deferred taxes, loss on conversion of debt and stock-based compensation charges. An increase in accounts receivable consumed $7.7 million of cash and was primarily driven by the 39% year-to-date increase in revenues and an increase in inventory consumed $9.3 million to support future revenue, due to the addition of C Technologies on May 31, 2019. These were offset by an increase in accounts payable and accrued liabilities of $13.8 million due to the addition of C Technologies and a decrease in unbilled receivables of $2.1 million. The remaining cash used in operating activities resulted from unfavorable changes in various other working capital accounts.

Investing activities

Our investing activities consumed $221.2 million of cash during 2021. We used $149.9 million in cash (net of cash received) for the acquisitions of Polymem, Avitide, BioFlex and NTM, in the aggregate. Capital expenditures consumed $71.3 million as we continue to increase our manufacturing capacity worldwide. Of these expenditures, $4.2 million represented capitalized costs related to our internal-use software.

Our investing activities consumed $201.4 million of cash during 2020. We used $175.0 million in cash (net of cash received) for the EMT, NMS and ARTeSYN Acquisitions. Capital expenditures consumed $26.3 million as we continue to increase our manufacturing capacity worldwide. Of these expenditures, $3.9 million represented capitalized costs related to our internal-use software.

Our investing activities consumed $205.3 million of cash during 2019. We used $182.2 million in cash (net of cash received) for the C Technologies Acquisition on May 31, 2019. Capital expenditures consumed $23.2 million as we continue to increase our manufacturing capacity worldwide. Of these expenditures, $4.7 million represented capitalized costs related to our internal-use software.

Financing activities

In 2021, cash provided by financing activities of $1.0 million included proceeds from stock option exercises, offset by cash disbursed in relation to shares withheld to cover employee income taxes due upon the vesting and release of restricted stock units. Proceeds from stock option exercises during 2021 were $3.9 million offset by $2.9 million of cash disbursed to pay tax obligation on the vesting of restricted stock units.

In 2020, cash provided by financing activities of $305.9 million included $297.8 million from the issuance of our common stock resulting from our public offerings completed in December 2020. Proceeds from stock option exercises during 2020 were $8.2 million.

In 2019, cash provided by financing activities of $484.9 million included $320.7 million from the issuance of our common stock resulting from our public offerings completed in May and July 2019. In addition, in July 2019 the Company issued $287.5 million aggregate principal amount of the 2019 Notes for net proceeds of $278.5 million. Proceeds from stock option exercises during 2019

52

were $1.2 million. Offsetting these activities was $115.0 million of cash utilized by the Company in July 2019 to settle the 2016 Notes.

Effect of exchange rate changes on cash, cash equivalents and restricted cash

The effect of exchange rate changes on cash during 2021 is a result of the weakening of the Swedish krona against the U.S. Dollar by 10% and the weakening of the Euro against the U.S. Dollar by 8%.

Off-Balance Sheet Arrangements

We do not have any special purpose entities or off-balance sheet financing arrangements.

Capital Requirements

Our future capital requirements will depend on many factors, including the following:

Absent acquisitions of additional products, product candidates or intellectual property, we believe our current cash balances are adequate to meet our cash needs for at least the next 24 months. We expect operating expenses in 2022 to increase as we continue to expand our bioprocessing business. We expect to incur continued spending related to the development and expansion of our bioprocessing product lines and expansion of our commercial capabilities for the foreseeable future. Our future capital requirements may include, but are not limited to, purchases of property, plant and equipment, the acquisition of additional bioprocessing products and technologies to complement our existing manufacturing capabilities, and continued investment in our intellectual property portfolio.

We plan to continue to invest in our bioprocessing business and in key R&D activities associated with the development of new bioprocessing products. We actively evaluate various strategic transactions on an ongoing basis, including licensing or acquiring complementary products, technologies or businesses that would complement our existing portfolio. We continue to seek to acquire such potential assets that may offer us the best opportunity to create value for our shareholders. In order to acquire such assets, we may need to seek additional financing to fund these investments. If our available cash balances and anticipated cash flow from operations are insufficient to satisfy our liquidity requirements, for example, due to acquisition-related financing needs or lower demand for our products, among potential other events, we may seek to sell common or preferred equity or convertible debt securities, enter into a credit facility or another form of third-party funding, or seek other debt funding. The sale of equity and convertible debt securities may result in dilution to our stockholders, and those securities may have rights senior to those of our common shares. If we raise additional funds through the issuance of preferred stock, convertible debt securities or other debt financing, these securities or other debt could contain covenants that would restrict our operations. Any other third-party funding arrangement could require us to relinquish valuable rights. We may require additional capital beyond our currently anticipated amounts. Additional capital may not be available on reasonable terms, if at all.

Net Operating Loss Carryforwards

At December 31, 2021, the Company had federal net operating loss carryforwards of $46.2 million, state net operating loss carryforwards of $4.0 million, and foreign net operating loss carryforwards of $6.1 million. Federal net operating loss carryforwards of $19.1 million will expire at various dates through 2037. The total state net operating loss carryforwards will expire at various dates through 2041, while the foreign net operating loss carryforwards do not expire. The other $27.1 million of the federal net operating loss carryforwards have unlimited carryforward periods. We had business tax credits carryforwards of $2.7 million available to reduce future federal and state income taxes, if any. The business tax credits carryforwards will continue to expire at various dates through

53

December 2041. Net operating loss carryforwards and available tax credits are subject to review and possible adjustment by the Internal Revenue Service, state and foreign jurisdictions and may be limited in the event of certain changes in the ownership interest of significant stockholders.

Foreign Earnings

As of December 31, 2021, the Company has accumulated undistributed earnings generated by our foreign subsidiaries of approximately $93.3 million. Because $5.7 million of such earnings have previously been subject to the one-time transition tax on foreign earnings required by the 2017 Tax Cuts and Jobs Act enacted in December 2017, any additional taxes due with respect to such earnings or the excess of the amount for financial reporting over the tax basis of our foreign investments would generally be limited to foreign and state taxes. At December 31, 2021, we have not provided for taxes on outside basis differences of our foreign subsidiaries, as we have the ability and intent to indefinitely reinvest the undistributed earnings of our foreign subsidiaries, and there are no needs for such earnings in the United States that would contradict our plan to indefinitely reinvest.

Effects of Inflation

Our assets are primarily monetary, consisting of cash and cash equivalents. Because of their liquidity, these assets are not directly affected by inflation. Since we intend to retain and continue to use our equipment, furniture, fixtures and office equipment, computer hardware and software and leasehold improvements, we believe that the incremental inflation related to replacement costs of such items will not materially affect our operations. However, the rate of inflation affects our expenses, such as those for employee compensation and contract services, which could increase our level of expenses and the rate at which we use our resources.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to market risk in the ordinary course of our business. Market risk represents the risk of loss that may impact our financial position due to adverse changes in financial market prices and rates. Our market risk exposure is primarily a result of fluctuations in interest rates and foreign currency exchange rates.

Interest Rate Risk

We have historically held investments in commercial paper, U.S. Government and agency securities as well as corporate bonds and other debt securities. As a result, we have been exposed to potential loss from market risks that may occur as a result of changes in interest rates, changes in credit quality of the issuer or otherwise. We do not have any such investments as of December 31, 2021. As a result, a hypothetical 100 basis point increase in interest rates would have no effect on our cash position as of December 31, 2021.

We generally place our marketable security investments in high quality credit instruments, as specified in our investment policy guidelines. We believe that the conservative nature of our investments mitigates our interest rate exposure, and our investment policy limits the amount of our credit exposure to any one issue, issuer (with the exception of U.S. agency obligations) and type of instrument. We do not expect any material loss from our marketable security investments and therefore believe that our potential interest rate exposure is limited.

Foreign Exchange Risk

The reporting currency of the Company is U.S. Dollars, and the functional currency of each of our foreign subsidiaries is its respective local currency. Our foreign currency exposures include the Swedish krona, Euro, British pound, Chinese yuan, Japanese yen, Singapore dollar, South Korean won and Indian rupee; of these, the primary foreign currency exposures are the Swedish kronor, Euro and British pound. Exchange gains or losses resulting from the translation between the transactional currency and the functional currency are included in net income. Fluctuations in exchange rates may adversely affect our results of operations, financial position and cash flows. We currently do not seek to hedge this exposure to fluctuations in exchange rates.

Although a majority of our contracts are denominated in U.S. Dollars, 37.5% and 29.8% of total revenues during 2021 and 2020, respectively, were denominated in foreign currencies while 27.1% and 6.8% of our costs and expenses during 2021 and 2020, respectively, were denominated in foreign currencies, primarily operating expenses associated with cost of revenue, sales and marketing and general and administrative. In addition, 17.7% and 21.8% of our consolidated tangible assets were subject to foreign

54

currency exchange fluctuations as of each of December 31, 2021 and 2020, respectively, while 9.6% and 5.7% of our consolidated liabilities were exposed to foreign currency exchange fluctuations as of each of December 31, 2021 and 2020, respectively.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Financial statements and supplementary data required by Item 8 are set forth at the pages indicated in Item 15(a) below and are incorporated herein by reference.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

ITEM 9A. CONTROLS AND PROCEDURES

(a) Disclosure Controls and Procedures.

The Company’s management, with the participation of our principal executive officer and principal financial officer, has evaluated the effectiveness of the Company’s disclosure controls and procedures (as defined in Rules 13a-15(e) or 15d-15(e) under the Exchange Act and as required by paragraph (b) of Rules 13a-15 or 15d-15 under the Exchange Act) as of the end of the period covered by this report. Based on such evaluation, our principal executive officer and principal financial officer have concluded that, as of the end of such period, the Company’s disclosure controls and procedures were effective at the reasonable assurance level.

(b) Report of Management on Internal Control Over Financial Reporting.

Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rule 13a-15(f) and 15d-15(f) under the Exchange Act as a process designed by, or under the supervision of, the Company’s principal executive and principal financial officers and effected by the Company’s Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles and includes those policies and procedures that:

Management assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2021. In making this assessment, management used the criteria established in Internal Control – Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (COSO).

We acquired Polymem S.A. (“Polymem”) on July 1, 2021, Avitide Inc. (“Avitide”) on September 20, 2021 and BioFlex Solutions LLC (“BioFlex”) and Newton T&M Corp. (“NTM”) on December 16, 2021. The financial results of each of these acquisitions are included in our audited consolidated financial statements as of December 31, 2021. The Company's consolidated total assets as of December 31, 2021 includes $52.4 million, $253.3 million and $33.4 million from the Polymem, Avitide, and NTM and BioFlex businesses, respectively. The Company's consolidated revenue for the year ended December 31, 2021 includes $2.3 million, $1.3 million and $0.1 million, from Polymem, Avitide, NTM and Bioflex businesses, respectively. As these acquisitions occurred in the third or fourth quarter of 2021, the scope of our assessment of our internal control over financial reporting does not include these acquisitions. These exclusions are in accordance with the SEC’s general guidance that an assessment of a recently acquired business may be omitted from our scope in the year of such acquisition.

55

In connection with our initiative to integrate and enhance our global information technology systems and business processes, we continued the phased implementation of a new enterprise resource planning (“ERP”) system. The implementation of the ERP system is done in phases and will continue until all current and future subsidiaries are using it. The third phase of this project was completed during the second quarter of 2021. As a result of this implementation, we modified certain existing internal controls over financial reporting as of December 31, 2021.

Other than the foregoing, there have been no changes in our internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Securities Exchange Act Rule 13a-15 or Rule 15d-15 that occurred in the three months ended December 31, 2021 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Subject to the foregoing, based on this assessment, our management concluded that, as of December 31, 2021, our internal control over financial reporting is effective based on those criteria. Ernst & Young LLP, the independent registered public accounting firm that audited our financial statements included in this Form 10-K, has issued an attestation report on our internal control over financial reporting as of December 31, 2021.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risks that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

(c) Attestation Report of the Independent Registered Public Accounting Firm.

56

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and the Board of Directors of Repligen Corporation:

Opinion on Internal Control over Financial Reporting

We have audited Repligen Corporation’s internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). In our opinion, Repligen Corporation (the Company) maintained, in all material respects, effective internal control over financial reporting as of December 31, 2021, based on the COSO criteria.

As indicated in the accompanying Report of Management on Internal Control Over Financial Reporting, management’s assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of Polymem S.A. ("Polymem"), Avitide, Inc. ("Avitide"), Newton T&M Corp ("NTM") and Bio-Flex Solutions, LLC ("Bioflex"), which are included in the 2021 consolidated financial statements of the Company and constituted $52.4 million, $253.3 million and $33.4 million of total assets, respectively, as of December 31, 2021, and $2.3 million, $1.3 million and $0.1 million of revenues, respectively, for the year to date 2021. Our audit of internal control over financial reporting of the Company also did not include an evaluation of the internal control over financial reporting of Polymem, Avitide, NTM and Bioflex.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2021 and 2020, the related consolidated statements of comprehensive income, stockholders' equity and cash flows for each of the three years in the period ended December 31, 2021, and the related notes and our report dated February 17, 2022 expressed an unqualified opinion thereon.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Report of Management on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.

Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

57

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ Ernst & Young LLP

Boston, Massachusetts

February 17, 2022

(d) Changes in Internal Control Over Financial Reporting

Other than the acquisition of Bioflex and NTM mentioned above, there have been no changes in our internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Securities Exchange Act Rule 13a-15 or Rule 15d-15 that occurred in the three months ended December 31, 2021 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B. OTHER INFORMATION

None.

ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS

Not applicable.