Simpson Manufacturing Co., Inc. - Quarter Report: 2014 June (Form 10-Q)

Large accelerated filer

Accelerated filer

Non-accelerated filer

(Do not check if a smaller reporting company)

Smaller reporting company

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)



ý	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended: June 30, 2014



o	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number: 1-13429

Simpson Manufacturing Co., Inc.

(Exact name of registrant as specified in its charter)



Delaware		94-3196943
(State or other jurisdiction of incorporation		(I.R.S. Employer
or organization)		Identification No.)

5956 W. Las Positas Blvd., Pleasanton, CA 94588

(Address of principal executive offices)

(Registrant’s telephone number, including area code): (925) 560-9000

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No ý

The number of shares of the registrant’s common stock outstanding as of June 30, 2014: 48,973,019

PART I — FINANCIAL INFORMATION

Item 1. Financial Statements.

Simpson Manufacturing Co., Inc. and Subsidiaries

Condensed Consolidated Balance Sheets

(In thousands, unaudited)



	June 30,					December 31,
	2014		2013			2013
ASSETS
Current assets
Cash and cash equivalents	$	221,196	$	165,275		$	251,208
Trade accounts receivable, net	137,803		126,888			90,017
Inventories	219,036		196,247			197,728
Deferred income taxes	13,625		12,874			12,699
Assets held for sale	—		586			—
Other current assets	12,503		8,465			16,454
Total current assets	604,163		510,335			568,106

Property, plant and equipment, net	206,563		209,544			209,533
Goodwill	129,231		122,678			129,218
Intangible assets, net	38,056		48,725			41,773
Other noncurrent assets	5,321		5,703			4,983
Total assets	$	983,334	$	896,985		$	953,613
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities
Line of credit and notes payable	$	62	$	1,201		$	103
Trade accounts payable	27,119		29,579			34,933
Accrued liabilities	56,490		44,619			51,745
Income taxes payable	1,734		—			—
Accrued profit sharing trust contributions	3,416		3,229			5,784
Accrued cash profit sharing and commissions	12,205		12,010			6,049
Accrued workers’ compensation	4,429		5,095			4,591
Total current liabilities	105,455		95,733			103,205

Deferred income tax and other long-term liabilities	12,603		8,221			9,129
Total liabilities	118,058		103,954			112,334
Commitments and contingencies (Note 7)
Stockholders’ equity
Common stock, at par value	489		485			486
Additional paid-in capital	213,037		187,549			207,418
Retained earnings	634,858		609,538			615,289
Treasury stock	—		(9,825		)	—
Accumulated other comprehensive income	16,892		5,284			18,086
Total stockholders’ equity	865,276		793,031			841,279
Total liabilities and stockholders’ equity	$	983,334	$	896,985		$	953,613

The accompanying notes are an integral part of these condensed consolidated financial statements

Simpson Manufacturing Co., Inc. and Subsidiaries

Condensed Consolidated Statements of Operations

(In thousands except per-share amounts, unaudited)



	Three Months Ended					Six Months Ended
	June 30,					June 30,
	2014			2013		2014			2013
Net sales	$	207,893		$	195,348	$	376,198		$	349,628
Cost of sales	111,993			106,176		202,518			195,736
Gross profit	95,900			89,172		173,680			153,892
Operating expenses:
Research and development and other engineering	10,094			9,484		19,794			17,792
Selling	24,213			21,652		46,032			43,024
General and administrative	29,494			28,347		56,435			54,382
Loss (gain) on sale of assets	(34		)	11		(319		)	3
	63,767			59,494		121,942			115,201
Income from operations	32,133			29,678		51,738			38,691
Interest (expense) income, net	(15		)	1		71			40
Income before taxes	32,118			29,679		51,809			38,731
Provision for income taxes	11,667			11,177		19,271			15,434
Net income	$	20,451		$	18,502	$	32,538		$	23,297

Earnings per common share:
Basic	$	0.42		$	0.38	$	0.66		$	0.48
Diluted	$	0.42		$	0.38	$	0.66		$	0.48

Number of shares outstanding
Basic	49,011			48,529		48,955			48,532
Diluted	49,227			48,628		49,146			48,627

Cash dividends declared per common share	$	0.140		$	0.125	$	0.265		$	0.125

The accompanying notes are an integral part of these condensed consolidated financial statements

Simpson Manufacturing Co., Inc. and Subsidiaries

Condensed Consolidated Statements of Comprehensive Income

(In thousands, unaudited)



	Three Months Ended						Six Months Ended
	June 30,						June 30,
	2014			2013			2014			2013
Net income	$	20,451		$	18,502		$	32,538		$	23,297
Other comprehensive loss
Translation adjustment, net of tax benefit (expense) of $33 and $0, $44 and ($84), respectively	(1		)	(999		)	(1,194		)	(6,815		)
Comprehensive income	$	20,450		$	17,503		$	31,344		$	16,482

The accompanying notes are an integral part of these condensed consolidated financial statements

Simpson Manufacturing Co., Inc. and Subsidiaries

Condensed Consolidated Statements of Stockholders’ Equity

For the six months ended June 30, 2013 and 2014, and for the six months ended December 31, 2013

(In thousands except per-share amounts, unaudited)



						Additional						Accumulated Other
	Common Stock					Paid-in			Retained			Comprehensive			Treasury
	Shares		Par Value			Capital			Earnings			Income (Loss)			Stock			Total
Balance, January 1, 2013	48,422		$	483		$	184,677		$	592,309		$	12,099		$	—		$	789,568
Net income	—		—			—			23,297			—			—			23,297
Translation adjustment, net of tax	—		—			—			—			(6,815		)	—			(6,815		)
Stock options exercised	31		1			775			—			—			—			776
Stock-based compensation	—		—			5,649			—			—			—			5,649
Tax effect of options exercised	—		—			(1,850		)	—			—			—			(1,850		)
Shares issued from release of Restricted Stock Units	107		1			(2,020		)	—			—			—			(2,019		)
Repurchase of common stock	(342	)	—			—			—			—			(9,825		)	(9,825		)
Cash dividends declared on common stock, $0.125 per share	—		—			—			(6,068		)	—			—			(6,068		)
Common stock issued at $33.81 per share for stock bonus	9		—			318			—			—			—			318
Balance, at June 30, 2013	48,227		485			187,549			609,538			5,284			(9,825		)	793,031
Net income	—		—			—			27,674			—						27,674
Translation adjustment, net of tax	—		—			—			—			12,756			—			12,756
Pension adjustment, net of tax	—		—			—			—			46			—			46
Stock options exercised	481		4			14,277			—			—			—			14,281
Stock-based compensation	—		—			6,441			—			—			—			6,441
Tax effect of options exercised	—		—			(795		)	—			—			—			(795		)
Shares issued from release of Restricted Stock Units	4		1			(54		)	—			—			—			(53		)
Retirement of treasury stock	—		(4		)	—			(9,821		)	—			9,825			—
Cash dividends declared on common stock, $0.25 per share	—		—			—			(12,102		)	—			—			(12,102		)
Balance, December 31, 2013	48,712		486			207,418			615,289			18,086			—			841,279
Net income	—		—			—			32,538			—			—			32,538
Translation adjustment, net of tax	—		—			—			—			(1,194		)	—			(1,194		)
Stock options exercised	92		1			2,625			—			—			—			2,626
Stock-based compensation	—		—			5,691			—			—			—			5,691
Tax effect of options exercised	—		—			(186		)	—			—			—			(186		)
Shares issued from release of Restricted Stock Units	158		2			(2,913		)	—			—			—			(2,911		)
Cash dividends declared on common stock, $0.265 per share	—		—			—			(12,969		)	—			—			(12,969		)
Common stock issued at $35.87 per share for stock bonus	11		—			402			—			—			—			402
Balance, June 30, 2014	48,973		$	489		$	213,037		$	634,858		$	16,892		$	—		$	865,276

The accompanying notes are an integral part of these condensed consolidated financial statements

Simpson Manufacturing Co., Inc. and Subsidiaries

Condensed Consolidated Statements of Cash Flows

(In thousands, unaudited)



	Six Months Ended
	June 30,
	2014			2013
Cash flows from operating activities
Net income	$	32,538		$	23,297
Adjustments to reconcile net income to net cash used in operating activities:
(Gain) loss on sale of assets	(319		)	3
Depreciation and amortization	14,785			14,777
Impairment loss on assets	—			1,025
Deferred income taxes	43			1,281
Noncash compensation related to stock plans	6,201			6,001
Excess tax benefit of options exercised and restricted stock units vested	(14		)	(11		)
Provision for doubtful accounts	141			9
Changes in operating assets and liabilities, net of acquisitions:
Trade accounts receivable	(47,732		)	(45,345		)
Inventories	(21,597		)	7,168
Trade accounts payable	(7,138		)	(7,021		)
Income taxes payable	8,170			11,859
Accrued profit sharing trust contributions	(2,367		)	(1,944		)
Accrued cash profit sharing and commissions	6,157			8,624
Other current assets	(2,294		)	185
Accrued liabilities	1,800			(1,502		)
Long-term liabilities	2,608			(477		)
Accrued workers’ compensation	(162		)	403
Other noncurrent assets	(318		)	578
Net cash (used in) provided by operating activities	(9,498		)	18,910
Cash flows from investing activities
Capital expenditures	(9,298		)	(8,095		)
Asset acquisitions, net of cash acquired	—			(5,300		)
Proceeds from sale of property and equipment	565			110
Loan made to customer	(281		)	—
Loan repayment by customer	4			—
Loan repayment by related party	—			625
Net cash used in investing activities	(9,010		)	(12,660		)
Cash flows from financing activities
Deferred and contingent consideration paid for asset acquisition	(1,293		)	—
Repurchase of common stock	—			(9,825		)
Debt and line of credit borrowings	—			1,129
Repayment of debt and line of credit borrowings	(41		)	(86		)
Issuance of common stock	2,626			776
Excess tax benefit of options exercised and restricted stock units vested	14			11
Dividends paid	(12,207		)	(6,053		)
Net cash used in financing activities	(10,901		)	(14,048		)
Effect of exchange rate changes on cash and cash equivalents	(603		)	(2,480		)
Net decrease in cash and cash equivalents	(30,012		)	(10,278		)
Cash and cash equivalents at beginning of period	251,208			175,553
Cash and cash equivalents at end of period	$	221,196		$	165,275
Noncash activity during the period
Noncash capital expenditures	$	672		$	63
Dividends declared but not paid	6,853			6,068
Issuance of Company’s common stock for compensation	402			318

The accompanying notes are an integral part of these condensed consolidated financial statements

Simpson Manufacturing Co., Inc. and Subsidiaries

Notes to Condensed Consolidated Financial Statements

(Unaudited)

1. Basis of Presentation

Principles of Consolidation

The condensed consolidated financial statements include the accounts of Simpson Manufacturing Co., Inc. and its subsidiaries (the “Company”). Investments in 50% or less owned affiliates are accounted for using either the cost or the equity method. All significant intercompany transactions have been eliminated.

Interim Period Reporting

The accompanying unaudited interim condensed consolidated financial statements have been prepared pursuant to the rules and regulations for reporting on Form 10-Q. Accordingly, certain information and footnotes required by accounting principles generally accepted in the United States of America (“GAAP”) have been condensed or omitted. These interim statements should be read in conjunction with the audited consolidated financial statements and the notes thereto included in the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2013.

The unaudited quarterly condensed consolidated financial statements have been prepared on the same basis as the audited annual consolidated financial statements and, in the opinion of management, contain all adjustments (consisting of only normal recurring adjustments) necessary to state fairly the financial information set forth therein, in accordance with GAAP. The year-end condensed consolidated balance sheet data were derived from audited financial statements, but do not include all disclosures required by GAAP. The Company’s quarterly results fluctuate. As a result, the Company believes the results of operations for the interim periods presented are not necessarily indicative of the results to be expected for any future period.

Revisions

The Company revised its June 30, 2013, Condensed Consolidated Balance Sheet to classify $5.4 million of indefinite-lived assets as intangible assets, net, that had erroneously been classified as other noncurrent assets. The Condensed Consolidated Statement of Operations for the three and six months ended June 30, 2013, was revised to reflect $0.2 million and $0.5 million, respectively, of rent income from properties rented to third-parties as an offset to general and administrative expense rather than as net sales as originally reported in error. With this revision, rental incomes are reported, net of related expenses, in general and administrative expense. These revisions were not considered material to the affected periods.

Out-of-Period Adjustment

In the first quarter of 2014, the Company recorded an out-of-period adjustment, which increased gross profit, income from operations and net income by $2.3 million, $2.0 million and $1.3million, respectively. The adjustment resulted from an over-statement of prior periods' workers compensation expense, net of cash profit sharing expense, and was not material to the current period or any prior period financial statements.

Withdrawal from Multi-Employer Defined-Benefit Pension Plan

Under the Company's collective bargaining arrangement with the tool and die craftsman and maintenance union, the Company has been contributing to a defined-benefit pension plan. In the second quarter of 2014, the Company and the union formally notified the defined-benefit pension plan administrator of their intent to withdraw from the plan. As soon as practicable, the plan administrator is required to respond by issuing a demand letter informing the Company of the annual withdrawal liability payment to be made by the Company and the number of years the annual payment is to be made. As of June 30, 2014, the Company has not yet received the demand letter from the plan administrator.

The Company calculated an annual withdrawal liability payment estimate and the number of years that payments are required. Using a ten-year look-back at the hourly rates paid for the defined benefit and the hours worked by participating employees, the Company estimated that a $142,000 annual withdrawal liability payment was required and that the payments would be in perpetuity.

Due to the amount and duration of payments, the Company was required to calculate and record a pension expense and liability based on the annual payments in perpetuity. The Company discounted the payment estimate using a discount rate of 5%, which

approximates the credit-adjusted risk-free rate for the Company. The Company recorded a $2.9 million liability in other long-term liabilities and a corresponding defined-benefit expense in cost of sales. On a quarterly basis, the Company will re-evaluate the amount of the annual payment, the number of years that payments are required and the discount rate used to calculate the long-term liability and adjust it as facts and circumstances change. All quarterly adjustments to the long-term liability will be charged to cost of sales in the Condensed Consolidated Statements of Operations. Because of the funding status of the plan, the annual withdrawal liability payments will be recorded as interest expense on the long-term liability until such time as a finite debt balance is determined.

Revenue Recognition

The Company recognizes revenue when the earnings process is complete, net of applicable provision for discounts, returns and incentives, whether actual or estimated, based on the Company’s experience. This generally occurs when products are shipped to the customer in accordance with the sales agreement or purchase order, ownership and risk of loss pass to the customer, collectability is reasonably assured and pricing is fixed or determinable. The Company’s general shipping terms are F.O.B. shipping point, and title is transferred and revenue is recognized when the products are shipped to customers. When the Company sells F.O.B. destination point, title is transferred and the Company recognizes revenue on delivery or customer acceptance, depending on terms of the sales agreement. Service sales, representing after-market repair and maintenance, engineering activities, software license sales and services and lease income, though significantly less than 1% of net sales and not material to the condensed consolidated financial statements, are recognized as the services are completed or the software products and services are delivered. If actual costs of sales returns, incentives and discounts were to significantly exceed the recorded estimated allowance, the Company’s sales would be adversely affected.

Net Earnings Per Common Share

Basic earnings per common share are computed based on the weighted-average number of common shares outstanding. Potentially dilutive securities, using the treasury stock method, are included in the diluted per-share calculations for all periods when the effect of their inclusion is dilutive.

The following is a reconciliation of basic earnings per common share to diluted earnings per share:



	Three Months Ended June 30,				Six Months Ended June 30,
(in thousands, except per share amounts)	2014		2013		2014		2013
Net income available to common stockholders	$	20,451	$	18,502	$	32,538	$	23,297
Basic weighted-average shares outstanding	49,011		48,529		48,955		48,532
Dilutive effect of potential common stock equivalents — stock options and restricted stock units	216		99		191		95
Diluted weighted-average shares outstanding	49,227		48,628		49,146		48,627
Earnings per common share:
Basic	$	0.42	$	0.38	$	0.66	$	0.48
Diluted	$	0.42	$	0.38	$	0.66	$	0.48
Potentially dilutive securities excluded from earnings per diluted share because their effect is anti-dilutive	—		—		—		—

Accounting for Stock-Based Compensation

With the approval of the Company’s stockholders on April 26, 2011, the Company adopted the Simpson Manufacturing Co., Inc. 2011 Incentive Plan (the “2011 Plan”). The 2011 Plan amended and restated in their entirety, and incorporated and superseded, both the Simpson Manufacturing Co., Inc. 1994 Stock Option Plan (the “1994 Plan”), which was principally for the Company’s employees, and the Simpson Manufacturing Co., Inc. 1995 Independent Director Stock Option Plan (the “1995 Plan”), which was for the Company's directors who are not employees. Options previously granted under the 1994 Plan or the 1995 Plan were not affected by the adoption of the 2011 Plan and continue to be governed by the 1994 Plan or the 1995 Plan, respectively.

Under the 1994 Plan, the Company could grant incentive stock options and non-qualified stock options. The Company, however, granted only non-qualified stock options under both the 1994 Plan and the 1995 Plan. The Company generally granted options under each of the 1994 Plan and the 1995 Plan once each year. The exercise price per share of each option granted under the 1994 Plan equaled the closing market price per share of the Company’s common stock as reported by the New York Stock Exchange on the day preceding the day that the Compensation and Leadership Development Committee of the Company’s Board of Directors met to approve the grant of the options. The exercise price per share under each option granted under the 1995 Plan was at the fair market value on the date specified in the 1995 Plan. Options vest and expire according to terms established at the grant date. Options granted under the 1994 Plan typically vest evenly over the requisite service period of four years and have a term of seven years. The vesting of options granted under the 1994 Plan will be accelerated if the grantee ceases to be employed by the Company after reaching age 60 or if there is a change in control of the Company. Options granted under the 1995 Plan were fully vested on the date of grant. Shares of common stock issued on exercise of stock options under the 1994 Plan and the 1995 Plan are registered under the Securities Act of 1933.

Under the 2011 Plan, the Company may grant incentive stock options, non-qualified stock options, restricted stock and restricted stock units, although the Company currently intends to award primarily restricted stock units and to a lesser extent, if at all, non-qualified stock options. The Company has not awarded, and does not currently intend to award, incentive stock options or restricted stock. Under the 2011 Plan, no more than 16.3 million shares of the Company’s common stock may be issued (including shares already issued) pursuant to all awards under the 2011 Plan, including on exercise of options previously granted under the 1994 Plan and the 1995 Plan. Shares of common stock to be issued pursuant to the 2011 Plan are registered under the Securities Act of 1933.

The following table represents the Company’s stock option and restricted stock unit activity for the three and six months ended June 30, 2014 and 2013:



	Three Months Ended June 30,						Six Months Ended June 30,
(in thousands)	2014			2013			2014			2013
Stock-based compensation expense recognized in operating expenses	$	3,264		$	2,807		$	5,740		$	5,686
Tax benefit of stock-based compensation expense in provision for income taxes	1,163			896			2,073			1,944
Stock-based compensation expense, net of tax	$	2,101		$	1,911		$	3,667		$	3,742
Fair value of shares vested	$	3,312		$	2,836		$	5,691		$	5,649
Proceeds to the Company from the exercise of stock-based compensation	$	857		$	280		$	2,626		$	776
Tax effect from the exercise of stock-based compensation, including shortfall tax benefits	$	(51	)	$	(7	)	$	(186	)	$	(1,850	)



	At June 30,
(in thousands)	2014		2013
Stock-based compensation cost capitalized in inventory	$	508	$	384

The amounts included in cost of sales, research and development and other engineering, selling, or general and administrative expense depend on the job functions performed by the employees to whom the stock options and restricted stock units were awarded.

The assumptions used to calculate the fair value of stock options granted or restricted stock units awarded are evaluated and revised, as necessary, to reflect market conditions and the Company’s experience.

Fair Value of Financial Instruments

The “Fair Value Measurements and Disclosures” topic of the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification™ (“ASC”) establishes a valuation hierarchy for disclosure of the inputs used to measure fair value. This hierarchy prioritizes the inputs into three broad levels as follows: Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities; Level 2 inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the financial instrument; and Level 3 inputs are unobservable inputs based on the Company’s assumptions used to measure assets and liabilities at fair value. A financial asset’s or liability’s classification within the hierarchy is determined based on the lowest level input that is significant to the fair value measurement.

The Company’s investments consisted of only United States Treasury securities and money market funds, which are the Company’s primary financial instruments, maintained in cash equivalents and carried at cost, approximating fair value, based on Level 1 inputs. The balances of the Company’s primary financial instruments were as follows:



	At June 30,				At December 31
(in thousands)	2014		2013		2013
Financial instruments	$	96,996	$	60,725	$	117,571

The carrying amounts of trade accounts receivable, accounts payable and accrued liabilities approximate fair value due to the short-term nature of these instruments. The fair value of the Company’s contingent consideration related to acquisitions is classified as Level 3 within the fair value hierarchy and is based on the Company's unobserved inputs and assumptions. The fair value was unchanged during the six months ended June 30, 2014.

Income Taxes

The Company uses an estimated annual effective tax rate to measure the tax benefit or tax expense recognized in each interim period. The effective tax rate was lower in the second quarter of 2014 than in the second quarter of 2013, primarily due to reduced second quarter 2014 operating losses in the Europe and Asia/Pacific segments, for which no tax benefit was recorded.

The following table presents the Company’s effective tax rates and income tax expense for the three and six months ended June 30, 2014 and 2013:



	Three Months Ended June 30,						Six Months Ended June 30,
(in thousands, except percentages)	2014			2013			2014			2013
Effective tax rate	36.3		%	37.7		%	37.2		%	39.8		%
Provision for income taxes	$	11,667		$	11,177		$	19,271		$	15,434

Acquisitions

In February 2013, the Company purchased certain assets relating to the TJ® ShearBrace (“ShearBrace”) product line of Weyerhaeuser NR Company (“Weyerhaeuser”) for $5.3 million in cash. The ShearBrace is a line of pre-fabricated shearwalls that complements the Company’s Strong-Wall shearwall, and is sold throughout North America. The Company’s measurement of assets acquired included goodwill of $0.9 million that has been assigned to the North America segment, and intangible assets of $3.6 million, both of which are subject to tax-deductible amortization. Net tangible assets consisting of inventory and equipment accounted for the balance of the purchase price. The weighted-average amortization period for the intangible assets is 11.3 years.

In November 2013, the Company purchased certain assets related to a connector product line from Bierbach GmbH & Co. KG (“Bierbach”), a Germany corporation, for $1.2 million in cash and a contingent liability of $0.8 million. Bierbach manufactured and sold a line of connectors, primarily in Germany. The Company’s provisional measurement of assets acquired included goodwill of $0.7 million, which was assigned to the Europe segment, and intangible assets of $0.6 million, both of which are subject to tax-deductible amortization. Net tangible assets consisting of inventory and tooling accounted for the balance of the purchase price.

In the first quarter of 2014, the Company paid $1.1 million in deferred consideration and $0.2 million in contingent consideration related to the acquisition of S&P Clever Reinforcement Company AG and S&P Clever International AG (collectively, “S&P Clever”). The remaining deferred and contingent consideration of $1.5 million will be payable in the first quarter of 2015.

Under the business combinations topic of the FASB ASC, the Company accounted for these acquisitions as business combinations and ascribed acquisition-date fair values to the acquired assets. Provisional fair value measurements were made in the first and fourth quarters of 2013 for the acquired assets of ShearBrace and Bierbach, respectively. Adjustments to those measurements may be made in subsequent periods, up to one year from the acquisition date, as information necessary to complete the analysis is obtained. Fair value of intangible assets was based on Level 3 inputs. The Company has completed the measurement process for ShearBrace assets and expects the measurement process for the Bierbach acquisition to be finalized within a year of its acquisition date.

Pro-forma financial information is not presented as it would not materially differ from the information presented in the Condensed Consolidated Statements of Operations.

Recently Issued Accounting Standards

In April 2014, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Codification Update No. 2014-08 (Topic 205 and Topic 360), Reporting Discontinued Operations and Disclosures of Disposals of Components of an Entity ("ASC Update No. 2014-08"). ASC update No. 2014-08 modifies the definition of discontinued operations by limiting discontinued operations reporting to disposals of components of an entity that represent strategic shifts that have (or will have) a major effect on an entity’s operations and financial results. ASC Update No. 2014-08 also requires additional financial statement disclosures about discontinued operations, as well as disposal of an individually significant component of an entity that does not qualify for discontinued operations presentation. ASC Update No. 2014-08 is effective prospectively for years beginning on or after December 15, 2014. The Company expects that the adoption of ASC Update 2014-08 will not materially affect its financial position or results of operations.

In May 2014, the FASB issued ASC Update No. 2014-09, Revenue from Contracts with Customers ("ASC Update No. 2014-09"). ASC Update No. 2014-09 supersedes nearly all existing revenue recognition guidance under GAAP. The core principle of ASC Update No. 2014-09 is that revenue is recognized when promised goods or services are transferred to customers in an amount that reflects the consideration to which an entity expects to be entitled for those goods or services. ASC Update No. 2014-09 defines a five-step process to achieve this core principle and, in doing so, more judgment and estimates may be required within the revenue recognition process than are required under existing GAAP. The standard is effective for annual and interim periods beginning after December 15, 2016, using either of the following transition methods: (i) a full retrospective approach reflecting the application of the standard in each prior reporting period with the option to elect certain practical expedients, or (ii) a retrospective approach with the cumulative effect of initially adopting ASC Update No. 2014-09 recognized at the date of adoption (which includes additional footnote disclosures). The Company is currently evaluating the effects of adopting ASC Update No. 2014-09 on its consolidated financial statements and has not yet determined the method by which it will adopt the standard in 2017.

Other recent authoritative guidance issued by the FASB (including technical corrections to the ASC), the American Institute of Certified Public Accountants and the Securities and Exchange Commission did not or is not expected to have a material effect on the Company’s consolidated financial statements.

2. Trade Accounts Receivable, Net

Trade accounts receivable consisted of the following:



	At June 30,						At December 31,
(in thousands)	2014			2013			2013
Trade accounts receivable	$	141,565		$	130,612		$	92,413
Allowance for doubtful accounts	(936		)	(1,141		)	(945		)
Allowance for sales discounts and returns	(2,826		)	(2,583		)	(1,451		)
	$	137,803		$	126,888		$	90,017

3. Inventories

Inventories consisted of the following:



	At June 30,				At December 31,
(in thousands)	2014		2013		2013
Raw materials	$	90,541	$	85,490	$	81,338
In-process products	20,810		18,759		18,475
Finished products	107,685		91,998		97,915
	$	219,036	$	196,247	$	197,728

4. Property, Plant and Equipment, Net

Property, plant and equipment, net, consisted of the following:



	At June 30,						At December 31,
(in thousands)	2014			2013			2013
Land	$	30,242		$	30,390		$	29,347
Buildings and site improvements	177,604			174,771			178,391
Leasehold improvements	5,531			4,996			5,213
Machinery, equipment, and software	232,479			216,154			225,831
	445,856			426,311			438,782
Less accumulated depreciation and amortization	(245,806		)	(226,202		)	(235,535		)
	200,050			200,109			203,247
Capital projects in progress	6,513			9,435			6,286
	$	206,563		$	209,544		$	209,533

5. Goodwill and Intangible Assets, Net

Goodwill was as follows:



	At June 30,				At December 31,
(in thousands)	2014		2013		2013
North America	$	84,806	$	81,080	$	84,822
Europe	42,632		39,853		42,690
Asia/Pacific	1,793		1,745		1,706
Total	$	129,231	$	122,678	$	129,218

Amortizable and indefinite-lived intangible assets, net, were as follows:



	At June 30, 2014
	Gross					Net
	Carrying		Accumulated			Carrying
(in thousands)	Amount		Amortization			Amount
North America	$	34,514	$	(17,929	)	$	16,585
Europe	33,202		(11,731		)	21,471
Total	$	67,716	$	(29,660	)	$	38,056



	At June 30, 2013
	Gross					Net
(in thousands)	Carrying Amount		Accumulated Amortization			Carrying Amount
North America	$	40,525	$	(14,591	)	$	25,934
Europe	31,308		(8,517		)	22,791
Total	$	71,833	$	(23,108	)	$	48,725



	At December 31, 2013
	Gross					Net
(in thousands)	Carrying Amount		Accumulated Amortization			Carrying Amount
North America	$	34,520	$	(15,909	)	$	18,611
Europe	33,217		(10,055		)	23,162
Total	$	67,737	$	(25,964	)	$	41,773

Intangible assets consists of definite-lived and indefinite-lived assets. Definite-lived intangible assets include customer relationships, patents, unpatented technology and non-compete agreements. Indefinite-lived intangible assets includes in-process research and development assets and a trade name. Amortization expense for definite-lived intangible assets during the three months ended June 30, 2014 and 2013, totaled $1.5 million and $2.0 million, respectively, and during the six months ended June 30, 2014 and 2013, totaled $3.7 million and $4.0 million, respectively. During the second quarter of 2014, approximately $3.3 million of in-process research and development cost was transferred to definite-lived intangible assets and will be amortized on a straight-line basis over its useful life.

At June 30, 2014, estimated future amortization of definite-lived intangible assets was as follows:



(in thousands)
Remaining six months of 2014	$	3,542
2015	6,401
2016	6,293
2017	4,422
2018	3,442
2019	3,414
Thereafter	8,238
	$	35,752

The changes in the carrying amount of goodwill and intangible assets for the six months ended June 30, 2014, were as follows:



			Intangible
(in thousands)	Goodwill		Assets
Balance at December 31, 2013	$	129,218	$	41,773
Amortization	—		(3,697		)
Foreign exchange	13		(20		)
Balance at June 30, 2014	$	129,231	$	38,056

6. Debt

The Company has revolving lines of credit with various banks in the United States and Europe. Total available credit at June 30, 2014, was $304.7 million, including revolving credit lines and an irrevocable standby letter of credit in support of various insurance deductibles.

The Company’s primary credit facility is a revolving line of credit with $300.0 million in available credit. This credit facility will expire in July 2017. Amounts borrowed under this credit facility will bear interest at an annual rate equal to either, at the Company’s option, (a) the rate for Eurocurrency deposits for the corresponding deposits of U.S. dollars appearing on Reuters LIBOR1screen page (the “LIBOR Rate”), adjusted for any reserve requirement in effect, plus a spread of 0.60% to 1.45%, determined quarterly based on the Company’s leverage ratio (at June 30, 2014, the LIBOR Rate was 0.15%), or (b) a base rate, plus a spread of 0.00% to 0.45%, determined quarterly based on the Company’s leverage ratio. The base rate is defined in a manner such that it will not be less than the LIBOR Rate. The Company will pay fees for standby letters of credit at an annual rate equal to the LIBOR Rate plus the applicable spread described above, and will pay market-based fees for commercial letters of credit. The Company is required to pay an annual facility fee of 0.15% to 0.30% of the available commitments under the credit agreement, regardless of usage, with the applicable fee determined on a quarterly basis based on the Company’s leverage ratio.

The Company’s unused borrowing capacity under other revolving credit lines and a term note totaled $4.6 million at June 30, 2014. The other revolving credit lines and term note charge interest ranging from 1.01% to 7.25%, have maturity dates from December 2014 to July 2017, and had outstanding balances totaling $0.1 million, $1.2 million and $0.1 million at June 30, 2014, June 30, 2013, and December 31, 2013, respectively. The Company was in compliance with its financial covenants at June 30, 2014.

7. Commitments and Contingencies

From time to time, the Company is involved in various legal proceedings and other matters arising in the normal course of business. The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows and results of operations.

Pending Claims

Four lawsuits (the “Cases”) have been filed against the Company in the Hawaii First Circuit Court: Alvarez v. Haseko Homes, Inc. and Simpson Manufacturing, Inc., Civil No. 09-1-2697-11 (“Case 1”); Ke Noho Kai Development, LLC v. Simpson Strong-Tie Company, Inc., and Honolulu Wood Treating Co., LTD., Case No. 09-1-1491-06 SSM (“Case 2”); North American Specialty Ins. Co. v. Simpson Strong-Tie Company, Inc. and K.C. Metal Products, Inc., Case No. 09-1-1490-06 VSM (“Case 3”); and Charles et al. v. Haseko Homes, Inc. et al. and Third Party Plaintiffs Haseko Homes, Inc. et al. v. Simpson Strong-Tie Company, Inc., et al., Civil No. 09-1-1932-08 (“Case 4”). Case 1 was filed on November 18, 2009. Cases 2 and 3 were originally filed on June 30, 2009. Case 4 was filed on August 19, 2009. The Cases all relate to alleged premature corrosion of the Company’s strap tie holdown products installed in buildings in a housing development known as Ocean Pointe in Honolulu, Hawaii, allegedly causing property damage. Case 1 is a putative class action brought by the owners of allegedly affected Ocean Pointe houses. Case 1 was originally filed as Kai et al. v. Haseko Homes, Inc., Haseko Construction, Inc. and Simpson Manufacturing, Inc., Case No. 09-1-1476, but was voluntarily dismissed and then re-filed with a new representative plaintiff. Case 2 is an action by the builders and developers of Ocean Pointe against the Company, claiming that either the Company’s strap tie holdowns are defective in design or manufacture or the Company failed to provide adequate warnings regarding the products’ susceptibility to corrosion in certain environments. Case 3 is a subrogation action brought by the insurance company for the builders and developers against the Company claiming the insurance company expended funds to correct problems allegedly caused by the Company’s products. Case 4 is a putative class action brought, like Case 1, by owners of allegedly affected Ocean Pointe homes. In Case 4, Haseko Homes, Inc. (“Haseko”), the developer of the Ocean Pointe development, brought a third party complaint against the Company alleging that any damages for which Haseko may be liable are actually the fault of the Company. Similarly, Haseko’s sub-contractors on the Ocean Pointe development brought cross-claims against the Company seeking indemnity and contribution for any amounts for which they may ultimately be found liable. None of the Cases alleges a specific amount of damages sought, although each of the Cases seeks compensatory damages, and Case 1 seeks punitive damages. Cases 1 and 4 have been consolidated. In December 2012, the Court granted the Company summary judgment on the claims asserted by the plaintiff homeowners in Cases 1 and 4, and on the third party complaint and cross-claims asserted by Haseko and the sub-contractors, respectively, in Case 4. In April 2013, the Court granted Haseko and the sub-contractors’ motion for leave to amend their cross-claims to allege a claim for negligent misrepresentation. The Company continues to investigate the facts underlying the claims asserted in the Cases, including, among other things, the cause of the alleged corrosion; the severity of any problems shown to exist; the buildings affected; the responsibility of the general contractor, various subcontractors and other construction professionals for the alleged damages; the amount, if any, of damages suffered; and the costs of repair, if needed. At this time, the likelihood that the Company will be found liable under any legal theory and the extent of such liability, if any, are unknown. Management believes the Cases may not be resolved for an extended period in the absence of agreement to settle the Cases and other related legal proceedings (discussed below). The Company is defending itself vigorously in connection with the Cases.

Based on facts currently known to the Company, the Company believes that all or part of the claims alleged in the Cases may be covered by its insurance policies. On April 19, 2011, an action was filed in the United States District Court for the District of Hawaii, National Union Fire Insurance Company of Pittsburgh, PA v. Simpson Manufacturing Company, Inc., et al., Civil No. 11-00254 ACK. In this action, Plaintiff National Union Fire Insurance Company of Pittsburgh, Pennsylvania (“National Union”), which issued certain Commercial General Liability insurance policies to the Company, seeks declaratory relief in the Cases with respect to its obligations to defend or indemnify the Company, Simpson Strong-Tie Company Inc., and a vendor of the Company’s strap tie holdown products. By Order dated November 7, 2011, all proceedings in the National Union action have been stayed. If the stay is lifted and the National Union action is not dismissed, the Company intends vigorously to defend all claims advanced by National Union.

On April 12, 2011, Fireman’s Fund Insurance Company (“Fireman’s Fund”), another of the Company’s general liability insurers, sued Hartford Fire Insurance Company (“Hartford”), a third insurance company from whom the Company purchased general liability insurance, in the United States District Court for the Northern District of California, Fireman’s Fund Insurance Company v. Hartford Fire Insurance Company, Civil No. 11 1789 SBA (the “Fireman’s Fund action”). The Company has intervened in the Fireman’s Fund action and the parties have agreed to a stay of proceedings pending resolution of the underlying Ocean Pointe cases.

all of the parties and should exercise jurisdiction at the appropriate time to resolve any and all disputes that have arisen or may in the future arise among the Company and its liability insurers; and that the San Francisco coverage action should also be stayed pending resolution of the underlying Ocean Pointe Cases. The San Francisco coverage action has been ordered stayed pending resolution of the Cases.

Based on recent mediation, a tentative settlement in principle has been reached to resolve all of these legal proceedings, including Cases 1, 2, 3 and 4; the National Union action; the Fireman’s Fund action; and the San Francisco coverage action. Formal settlement documents are being circulated for review and comment. If the tentative settlement in principle is documented in a final, enforceable agreement and its conditions are satisfied, the Company will incur no uninsured liability in any of these legal proceedings. The Company cannot predict when, if ever, any settlement will be finalized, and an unfavorable outcome could result in uninsured liability that substantially exceeds the amount of such tentative settlement in principle. It is not possible to reasonably estimate the amount or range of any such possible excess.

Nishimura v. Gentry Homes, Ltd; Simpson Manufacturing Co., Inc.; and Simpson Strong-Tie Company, Inc., Civil no. 11-1-1522-07, was filed in the Circuit Court of the First Circuit of Hawaii on July 20, 2011. The Nishimura case alleges premature corrosion of the Company’s strap tie holdown products in a housing development at Ewa Beach in Honolulu, Hawaii. In February 2012, the Court dismissed three of the five claims the plaintiffs had asserted against the Company. In December 2013, the Court granted the Company's motion for summary judgment on the remaining claims. Currently, the case is closed, though it remains subject to appeal.

The Company is not engaged in any other legal proceedings as of the date hereof, which the Company expects individually or in the aggregate to have a material adverse effect on the Company’s financial condition, cash flows or results of operations. The resolution of claims and litigation is subject to inherent uncertainty and could have a material adverse effect on the Company’s financial condition, cash flows or results of operations.

Other

The Company’s policy with regard to environmental liabilities is to accrue for future environmental assessments and remediation costs when information becomes available that indicates that it is probable that the Company is liable for any related claims and assessments and the amount of the liability is reasonably estimable. The Company does not believe that these environmental matters will have a material adverse effect on the Company’s financial condition, cash flows or results of operations.

Corrosion, hydrogen enbrittlement, cracking, material hardness, wood pressure-treating chemicals, misinstallations, misuse, design and assembly flaws, manufacturing defects, environmental conditions or other factors can contribute to failure of fasteners, connectors, tools, anchors, adhesives and tool products. On occasion, some of the products that the Company sells have failed, although the Company has not incurred any material liability resulting from those failures. The Company attempts to avoid such failures by establishing and monitoring appropriate product specifications, manufacturing quality control procedures, inspection procedures and information on appropriate installation methods and conditions. The Company subjects its products to extensive testing, with results and conclusions published in Company catalogues and on its websites. Based on test results to date, the Company believes that, generally, if its products are appropriately selected, installed and used in accordance with the Company’s guidance, they may be reliably used in appropriate applications.

8. Stock-Based Incentive Plans

The Company currently has one stock-based incentive plan, which incorporates and supersedes its two previous plans (see Note 1 “Basis of Presentation — Accounting for Stock-Based Compensation”). Participants are granted stock-based awards only if the applicable Company-wide or profit-center operating goals, or both, established by the Compensation and Leadership Development Committee of the Board of Directors at the beginning of the year, are met. Certain participants may have additional goals based on strategic initiatives of the Company.

The fair value of each restricted stock unit award is estimated on the date of the award based on the closing market price of the underlying stock on the day preceding the date of the award. On February 3, 2014, 342,950 restricted stock units were awarded, including 9,975 awarded to the Company’s directors who are not employees, at an estimated value of $30.98 per share, based on the closing price on January 31, 2014. The restrictions on these awards generally lapse one quarter on the date of the award and one quarter on each of the first, second and third anniversaries of the date of the award.

The following table summarizes the Company’s unvested restricted stock unit activity for the six months ended June 30, 2014:



	Shares		Weighted- Average Price		Aggregate Intrinsic Value *
Unvested Restricted Stock Units (RSUs)	(in thousands)		Weighted- Average Price		(in thousands)
Outstanding at January 1, 2014	448		$	32.48
Awarded	343
Vested	(249	)
Forfeited	(1	)
Outstanding at June 30, 2014	541		$	31.68	$	19,669
Outstanding and expected to vest at June 30, 2014	528		$	31.69	$	16,745


*	The intrinsic value is calculated using the closing price per share of $36.36 as reported by the New York Stock Exchange on June 30, 2014.

Based on the market value on the award date, the total intrinsic value of vested restricted stock units during the six-month periods ended June 30, 2014 and 2013, was $8.0 million and $5.5 million, respectively.

No stock options were granted in 2013 or the first six months of 2014. The following table summarizes the Company’s stock option activity for the six months ended June 30, 2014:



	Shares		Weighted- Average Exercise Price		Weighted- Average Remaining Contractual Life	Aggregate Intrinsic Value *
Non-Qualified Stock Options	(in thousands)				(in years)	(in thousands)
Outstanding at January 1, 2014	1,021		$	29.35
Exercised	(92	)
Forfeited	(5	)
Outstanding at June 30, 2014	924		$	29.40		$	6,436
Outstanding and expected to vest at June 30, 2014	916		$	29.40	3.5	$	6,378
Exercisable at June 30, 2014	669		$	29.30	3.5	$	4,726


*	The intrinsic value represents the amount, if any, by which the fair market value of the underlying common stock exceeds the exercise price of the stock option, using the closing price per share of $36.36 as reported by the New York Stock Exchange on June 30, 2014.

The total intrinsic value of stock options exercised during the six-month periods ended June 30, 2014 and 2013, was $0.5 million and $0.2 million, respectively.

A summary of the status of unvested stock options as of June 30, 2014, and changes during the six months ended June 30, 2014, are presented below:



	Shares		Weighted- Average Grant-Date Fair Value
Unvested Stock Options	(in thousands)
Unvested at January 1, 2014	448		$	10.31
Vested	(193	)	10.29
Unvested at June 30, 2014	255		$	10.33

As of June 30, 2014, $22.3 million of total unrecognized compensation cost was related to unvested stock-based compensation arrangements under the 2011 Incentive Plan for awards made through February 2014 and those expected to be made through February 2015. The portions of this cost related to stock options and restricted stock units awarded through February 2014 are expected to be recognized over a weighted-average period of 1.9 years.

9. Segment Information

The Company is organized into three reportable segments. The segments are defined by the regions where the Company’s products are manufactured, marketed and distributed to the Company’s customers. The three regional segments are the North America segment, comprising primarily the United States and Canada, the Europe segment, comprising continental Europe and the United Kingdom, and the Asia/Pacific segment, comprising the Company’s operations in China, Hong Kong, the South Pacific and the Middle East. These segments are similar in several ways, including the types of materials, the production processes, the distribution channels and the product applications.

The Company’s measure of profit or loss for its reportable segments is income (loss) from operations. The reconciling amounts between consolidated income before tax and consolidated income from operations are net interest income, which is primarily attributed to Administrative and All Other.

The following tables illustrate certain measurements used by management to assess the performance as of or for the following periods:



	Three Months Ended June 30,						Six Months Ended June 30,
(in thousands)	2014			2013			2014			2013
Net Sales
North America	$	168,600		$	159,757		$	305,482		$	287,493
Europe	35,024			32,088			62,688			55,988
Asia/Pacific	4,269			3,503			8,028			6,147
Total	$	207,893		$	195,348		$	376,198		$	349,628
Sales to Other Segments*
North America	$	963		$	1,170		$	2,093		$	1,931
Europe	160			394			626			674
Asia/Pacific	4,256			4,875			7,328			9,011
Total	$	5,379		$	6,439		$	10,047		$	11,616
Income (Loss) from Operations
North America	$	30,123		$	29,665		$	52,685		$	44,924
Europe	3,755			2,241			2,836			(1,939		)
Asia/Pacific	(484		)	(46		)	(1,636		)	(1,229		)
Administrative and all other	(1,261		)	(2,182		)	(2,147		)	(3,065		)
Total	$	32,133		$	29,678		$	51,738		$	38,691

* The sales to other segments are eliminated in consolidation.



					At
	At June 30,				December 31,
(in thousands)	2014		2013		2013
Total Assets
North America	$	659,307	$	603,981	$	627,196
Europe	205,570		188,563		201,384
Asia/Pacific	29,868		32,408		31,560
Administrative and all other	88,589		72,033		93,473
Total	$	983,334	$	896,985	$	953,613

Cash collected by the Company’s United States subsidiaries is routinely transferred into the Company’s cash management accounts and, therefore, has been included in the total assets of “Administrative and all other.” Cash and cash equivalent balances in the “Administrative and all other” segment were $131.6 million, $86.8 million, and $156.0 million, as of June 30, 2014 and 2013, and December 31, 2013, respectively.

The following table illustrates the distribution of the Company’s net sales by product group for the following periods:



	Three Months Ended June 30,				Six Months Ended June 30,
(in thousands)	2014		2013		2014		2013

Wood Construction Products	$	176,363	$	165,865	$	321,042	$	298,660
Concrete Construction Products	31,493		29,414		55,031		50,834
Other	37		69		125		134
Total	$	207,893	$	195,348	$	376,198	$	349,628

Wood construction products include connectors, truss plates, fastening systems, fasteners and pre-fabricated shearwalls and are used for connecting and strengthening wood-based construction primarily in the residential construction market. Concrete construction products include adhesives, chemicals, mechanical anchors, carbide drill bits, powder actuated tools and fiber reinforcing materials and are used for restoration, protection or strengthening concrete, masonry and steel construction in residential, industrial, commercial and infrastructure construction.

10. Subsequent Events

In July 2014, the Company’s Board of Directors declared a cash dividend of $0.14 per share, estimated to total $6.9 million, to be paid on October 23, 2014, to stockholders of record on October 2, 2014.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

This document contains forward-looking statements, based on numerous assumptions and subject to risks and uncertainties, such as statements below regarding sales, profits, gross profit margins, effective tax rate, capital spending and steel prices for any future period. Although the Company believes that the forward-looking statements are reasonable, it does not and cannot give any assurance that its beliefs and expectations will prove to be correct. Many factors could significantly affect the Company’s operations and cause the Company’s actual results to be substantially different from the Company’s expectations. Those factors include, but are not limited to: (i) general economic and construction business conditions; (ii) customer acceptance of the Company's products; (iii) relationships with key customers; (iv) materials and manufacturing costs; (v) the financial condition of customers, competitors and suppliers; (vi) technological developments; (vii) increased competition; (viii) changes in capital and credit market conditions; (ix) governmental and business conditions in countries where the Company's products are manufactured and sold; (x) changes in trade regulations; (xi) the effect of acquisition activity; (xii) changes in the Company's plans, strategies, objectives, expectations or intentions; and (xiii) other risks and uncertainties indicated from time to time in the Company's filings with the U.S. Securities and Exchange Commission. See “Part II, Item 1A - Risk Factors.” Actual results might differ materially from results suggested by any forward-looking statements in this report. The Company does not have an obligation to publicly update any forward-looking statements, whether as a result of the receipt of new information, the occurrence of future events or otherwise.

The following is a discussion and analysis of the consolidated financial condition and results of operations for the Company for the three and six months ended June 30, 2014. The following should be read in conjunction with the interim Condensed Consolidated Financial Statements and related Notes appearing elsewhere herein.

Overview

The Company designs, manufactures and sells building construction products that are of high quality and performance, easy to use and cost-effective for customers. It operates in three business segments determined by geographic region: North America, Europe and Asia/Pacific. The Company’s stated goals are to strengthen its core wood construction products, expand its global footprint to be less dependent on housing starts in the United States and continue to invest in strategic initiatives, such as expanding its offering of concrete construction products, particularly specialty chemicals, and wood construction products, particularly truss plates and software.

The North America, Europe and Asia/Pacific segments all sell both wood construction products and concrete construction products.

Until recently, the Europe segment sold primarily wood construction products. If the economic conditions in Europe for the second half of the year are consistent with the first half of the year, the Company estimates that the Europe segment will report an operating profit for the current year.

With the expansion of product lines that repair, protect and strengthen concrete, brick, masonry or asphalt construction, concrete construction product sales have increased in the Asia/Pacific segment. Based on current conditions, the Company expects the Asia/Pacific segment to report operating losses for 2014 and 2015.

The Admin & All Other column includes expenses such as stock compensation for certain members of management, interest expense, self-insured workers compensation claims, if any, for certain members of management, foreign exchange gains or losses and income tax expense. It also includes revenues and expenses related to real estate activities, such as rental income and associated expenses on the Company’s facility in Vacaville, California, which the Company has leased to a third party for a term expiring in August 2020.

The Company has continued to benefit from steady housing starts with increased sales volumes in the second quarter of 2014, particularly in the North America segment. Unlike lumber or other products that have a more direct correlation to housing starts, however, the Company’s products are used to a greater extent in areas that are subject to natural forces, such as seismic or wind events. The Company’s products are used in a sequential process that follows the construction process. Residential and commercial construction begins with the foundation, followed by the wall and the roof systems, and the installation of the Company’s products flow into a project or a house according to those schedules. Foundation product sales could be considered a leading indicator. Sales of these products in the second quarter of 2014 increased compared to the same period in 2013.

The Company’s sales also tend to be seasonal, with operating results varying from quarter to quarter. With some exceptions, the Company’s sales and income have historically been lower in the first and fourth quarters than in the second and third quarters of the year, as customers purchase construction materials in the late spring and summer months for the construction season. In addition, weather conditions, such as extended cold or wet weather, which affect and sometimes delay installation of some of the Company’s products, could negatively affect the Company’s results of operations. Political and economic events can also affect the Company’s sales and profitability.

Results of Operations for the Three Months Ended June 30, 2014, Compared

with the Three Months Ended June 30, 2013

Net sales increased 6.4% to $207.9 million for the second quarter of 2014 from $195.3 million for the second quarter of 2013. The Company had net income of $20.5 million for the second quarter of 2014 compared to $18.5 million for the second quarter of 2013. Diluted net income per common share was $0.42 for the second quarter of 2014 compared to $0.38 per common share for the second quarter of 2013. The following table illustrates the differences in the Company’s operating results in the three months ended June 30, 2014, from the three months ended June 30, 2013, and the increases or decreases for each category by segment:



	Three Months Ended														Three Months Ended
	Three Months Ended		Increase (Decrease) in Operating Segment												Three Months Ended
	June 30,		North						Asia/			Admin &			June 30,
(in thousands)	2013		America			Europe			Pacific			All Other			2014
Net sales	$	195,348	$	8,843		$	2,936		$	766		$	—		$	207,893
Cost of sales	106,176		4,181			1,320			797			(481		)	111,993
Gross profit	89,172		4,662			1,616			(31		)	481			95,900
Research and development and other engineering expense	9,484		594			(6		)	22			—			10,094
Selling expense	21,652		2,203			279			93			(14		)	24,213
General and administrative expense	28,347		1,428			(161		)	307			(427		)	29,494
Loss (gain) on sale of assets	11		(21		)	(10		)	(14		)	—			(34		)
Income from operations	29,678		458			1,514			(439		)	922			32,133
Interest (expense) income, net	1		(71		)	49			(27		)	33			(15		)
Income before income taxes	29,679		387			1,563			(466		)	955			32,118
Provision for income taxes	11,177		367			(10		)	(120		)	253			11,667
Net income	$	18,502	$	20		$	1,573		$	(346	)	$	702		$	20,451

Net sales

The following table represents net sales by segment for the three-month periods ended June 30, 2013 and 2014:



	North						Asia/
(in thousands)	America			Europe			Pacific			Total
Three Months Ended
June 30, 2013	$	159,757		$	32,088		$	3,503		$	195,348
June 30, 2014	168,600			35,024			4,269			207,893
Increase	$	8,843		$	2,936		$	766		$	12,545
Percentage increase	5.5		%	9.1		%	21.9		%	6.4		%

The following table represents segment net sales as percentages of total net sales for the three-month periods ended June 30, 2013 and 2014:



	North America		Europe		Asia/ Pacific		Total
Percentage of total 2013 net sales	81.8	%	16.4	%	1.8	%	100.0	%
Percentage of total 2014 net sales	81.1	%	16.8	%	2.1	%	100.0	%

In the second quarter of 2014, the Company's net sales increased in the North America, Europe and Asia/Pacific segments, with North America reporting the largest increase in dollars. North America and Europe sales benefited from improved economic activity.


•	Segment net sales:


◦	North America – Net sales increased 5.5% in the second quarter of 2014 compared to the second quarter of 2013, primarily due to increased sales volumes, partly offset by lower average selling prices and the effects of foreign currency translations.


◦	Europe – Net sales increased 9.1% in the second quarter of 2014 compared to the second quarter of 2013, mostly due to increased sales volumes and the effects of foreign currency translations, partly offset by lower average selling prices.


•	Consolidated net sales channels and product groups:


◦	Net sales to contractor distributors, dealer distributors and lumber dealers increased in the second quarter of 2014 compared to the second quarter of 2013, while home center sales decreased compared to the same period in 2013.


◦	Wood construction product sales, including connectors, truss plates, fastening systems, fasteners and shearwalls, represented 85% of total Company sales in the second quarter of each of 2014 and 2013.


◦	Concrete construction product sales, including adhesives, chemicals, mechanical anchors, powder actuated tools and reinforcing fiber materials, represented 15% of total Company sales in the second quarter of each of 2014 and 2013.

Gross profit

The following table represents gross profit by segment for the three-month periods ended June 30, 2013 and 2014:



	North						Asia/			Admin &
(in thousands)	America			Europe			Pacific			All Other			Total
Three Months Ended
June 30, 2013	$	76,036		$	12,574		$	881		$	(319	)	$	89,172
June 30, 2014	80,698			14,190			850			162			95,900
Increase	$	4,662		$	1,616		$	(31	)	$	481		$	6,728
Percentage increase	6.1		%	12.9		%	(3.5		)%	*			7.5		%

* The statistic is not meaningful or not material.

The following table represents gross profit as a percentage of sales by segment for the three-month periods ended June 30, 2013 and 2014:



(in thousand)	North America		Europe		Asia/ Pacific		Admin & All Other	Total
2013 gross profit percentage	47.6	%	39.2	%	25.1	%	*	45.6	%
2014 gross profit percentage	47.9	%	40.5	%	19.9	%	*	46.1	%

* The statistic is not meaningful or not material.

Gross profit increased to $95.9 million in the second quarter of 2014 from $89.2 million in the second quarter of 2013. Gross profit as a percentage of net sales increased to 46.1% in the second quarter of 2014 from 45.6% in the second quarter of 2013.

•

North America – Gross profit margin increased to 47.9% in the second quarter of 2014 from 47.6% in the second quarter of 2013, as a result of decreases as a percentage of sales in material and labor costs. The decreases were partly offset by increases as a percentage of sales in factory overhead, primarily due to an atypical $2.9 million charge that resulted from the Company's withdrawal from a multi-employer union-based defined-benefit pension plan.


•	Europe – Gross profit margin increased to 40.5% in the second quarter of 2014 from 39.2% in the second quarter of 2013, as a result of decreases as a percentage of sales in factory overhead on increased volumes and in shipping costs, partly offset by increases as a percentage of sales in material and labor costs.

•

Product mix – The gross profit margin differential between wood construction products and concrete construction products, which have lower gross profit margins, was 13% and 9% in the second quarter of 2014 and the second quarter of 2013, respectively. This negatively affected gross margin in North America, with concrete construction products representing 13% of North America net sales in the second quarter of each of 2014 and 2013, and in Europe, with concrete construction products representing 19% and 20% of Europe net sales in the second quarters of 2014 and 2013, respectively.

Research and development and engineering expense

Research and development and engineering expense increased 6.4% to $10.1 million in the second quarter of 2014 from $9.5 million in the second quarter of 2013, primarily due to increases of $0.2 million in cash profit sharing and $0.1 million in each of stock-based compensation, personnel costs, software development costs and professional fees. Software development costs of $1.3 million were capitalized in the second quarter of 2014 compared to no software development costs capitalized in the second quarter of 2013.


•	North America – Research and development and engineering expense increased $0.6 million, primarily due to increases of $0.2 million in cash profit sharing and $0.1 million in each of stock-based compensation and professional fees.

Selling expense

Selling expense increased 11.8% to $24.2 million in the second quarter of 2014 from $21.7 million in the second quarter of 2013, primarily due to increases of $1.0 million in personnel costs, $1.0 million in professional fees, $0.5 million in promotional costs and $0.2 million in stock-based compensation, partially offset by a decrease of $0.1 million in cash profit sharing and commissions.

•

North America – Selling expense increased $2.2 million, primarily due to increases of $0.9 million in personnel costs related to the addition of staff and pay rate increases instituted in January 2014, $0.9 million in professional fees, $0.6 million in promotional costs and $0.2 million in stock-based compensation, partially offset by a decrease of $0.3 million in cash profit sharing and commissions.

General and administrative expense

General and administrative expense increased 4.0% to $29.5 million in the second quarter of 2014 from $28.3 million in the second quarter of 2013, primarily due to increases of $0.7 million in cash profit sharing, $0.6 million in personnel costs, $0.3 million in depreciation expense and $0.1 million in each of professional fees and phone and computer expense, partly offset by a $0.4 million decrease in amortization expense.

•

North America – General and administrative expense increased $1.4 million, primarily due to increases of $0.4 million in cash profit sharing, $0.3 million in personnel costs related to the addition of administrative and information technology staff and pay rate increases instituted in January 2014, $0.3 million in professional fees, $0.3 million in depreciation and $0.2 million in phone and computer expense, partly offset by a $0.6 million decrease in amortization expense.


•	Europe – General and administrative expense decreased by $0.2 million, primarily due to decreases of $0.3 million in stock-based compensation and $0.1 million in professional fees, partly offset by an increase of $0.5 million in cash profit sharing.


•	Administrative and all other – General and administrative expense decreased by $0.4 million, primarily due to decreases of $0.2 million in cash profit sharing and $0.1 million in professional fees.

Income taxes

The effective income tax rate in the second quarter of 2014 was 36.3% compared to 37.7% in the second quarter of 2013. The effective income tax rate was lower primarily due to reduced second quarter 2014 operating losses in the Europe and Asia/Pacific segments for which no tax benefit was recorded.

Results of Operations for the Six Months Ended June 30, 2014, Compared

with the Six Months Ended June 30, 2013

Net sales increased 7.6% to $376.2 million in the first half of 2014 from $349.6 million in the first half of 2013. The Company had net income of $32.5 million in the first half of 2014 compared to $23.3 million in the first half of 2013. Diluted net income per common share was $0.66 in the first half of 2014 compared to $0.48 per common share in the first half of 2013. The following table illustrates the differences in the Company’s operating results in the six months ended June 30, 2014, from the six months ended June 30, 2013, and the increases or decreases for each category by segment:



	Six Months Ended														Six Months Ended
	Six Months Ended		Increase (Decrease) in Operating Segment												Six Months Ended
	June 30,		North						Asia/			Admin &			June 30,
(in thousands)	2013		America			Europe			Pacific			All Other			2014
Net sales	$	349,628	$	17,989		$	6,700		$	1,881		$	—		$	376,198
Cost of sales	195,736		3,127			2,587			1,602			(534		)	202,518
Gross profit	153,892		14,862			4,113			279			534			173,680
Research and development and other engineering expense	17,792		1,471			397			134			—			19,794
Selling expense	43,024		2,264			495			294			(45		)	46,032
General and administrative expense	54,382		3,729			(1,599		)	262			(339		)	56,435
Loss (gain) on sale of assets	3		(362		)	45			(5		)	—			(319		)
Income from operations	38,691		7,760			4,775			(406		)	918			51,738
Interest income, net	40		(74		)	104			(44		)	45			71
Income before income taxes	38,731		7,686			4,879			(450		)	963			51,809
Provision for income taxes	15,434		3,691			30			(198		)	314			19,271
Net income	$	23,297	$	3,995		$	4,849		$	(252	)	$	649		$	32,538

Net sales

The following table represents net sales by segment for the six-month periods ended June 30, 2013 and 2014:



	North						Asia/
(in thousands)	America			Europe			Pacific			Total
Six months ended
June 30, 2013	$	287,493		$	55,988		$	6,147		$	349,628
June 30, 2014	305,482			62,688			8,028			376,198
Increase	$	17,989		$	6,700		$	1,881		$	26,570
Percentage increase	6.3		%	12.0		%	30.6		%	7.6		%

The following table represents segment net sales as percentages of total net sales for the six-month periods ended June 30, 2013 and 2014:



	North America		Europe		Asia/ Pacific		Total
Percentage of total 2013 net sales	82.2	%	16.0	%	1.8	%	100.0	%
Percentage of total 2014 net sales	81.2	%	16.7	%	2.1	%	100.0	%

In the first half of 2014, the Company's net sales increased in the North America, Europe and Asia/Pacific segments, with North America reporting the largest increase in dollars, primarily due to increased sales volumes. North America and Europe sales benefited from improved economic activity.


•	Segment net sales:


◦	North America – Net sales increased 6.3% in the first half of 2014 compared to the first half of 2013, primarily due to increased sale volumes, partly offset by lower average selling prices and the effects of foreign currency translations.


◦	Europe – Net sales increased 12.0% in the first half of 2014 compared to the first half of 2013, mostly due to increased sales volumes and the effects of foreign currency translations, partly offset by lower average selling prices.


•	Consolidated net sales channels and product groups:


◦	Net sales to contractor distributors, dealer distributors and lumber dealers increased in the first half of 2014 compared to the first half of 2013, while home center sales decreased compared to the same period in 2013.


◦	Wood construction product sales, including connectors, truss plates, fastening systems, fasteners and shearwalls, represented 85% of total Company sales in the first half of each of 2014 and 2013.


◦	Concrete construction product sales, including adhesives, chemicals, mechanical anchors, powder actuated tools and reinforcing fiber materials, represented 15% of total Company sales in the first half of each of 2014 and 2013.

Gross profit

The following table represents gross profit by segment for the six-month periods ended June 30, 2013 and 2014:



	North						Asia/			Admin &
(in thousands)	America			Europe			Pacific			All Other			Total
Six months ended
June 30, 2013	$	133,128		$	19,858		$	1,327		$	(421	)	$	153,892
June 30, 2014	147,990			23,971			1,606			113			173,680
Increase	$	14,862		$	4,113		$	279		$	534		$	19,788
Percentage increase	11.2		%	20.7		%	21.0		%	*			12.9		%

* The statistic is not meaningful or not material.

The following table represents gross profit as a percentage of sales by segment for the six-month periods ended June 30, 2013 and 2014:



(in thousand)	North America		Europe		Asia/ Pacific		Admin & All Other	Total
2013 gross profit percentage	46.3	%	35.5	%	21.6	%	*	44.0	%
2014 gross profit percentage	48.4	%	38.2	%	20.0	%	*	46.2	%

* The statistic is not meaningful or not material.

Gross profit increased to $173.7 million in the first half of 2014 from $153.9 million in the first half of 2013. Gross profit as a percentage of net sales increased to 46.2% in the first half of 2014 from 44.0% in the first half of 2013. Based on current information, the Company estimates that its full year 2014 gross profit margin will be between 44% and 46%.

•

North America – Gross profit margin increased to 48.4% in the first half of 2014 from 46.3% in the first half of 2013, as a result of decreases as a percentage of sales in all elements of costs, with the largest decreases as a percentage of sales in materials and in factory overhead elements on increased volumes. In the first half of 2014, the gross profit margin was affected by an atypical $2.9 million pension charge that resulted from the Company's withdrawal from a multi-employer union-based defined-benefit pension plan, partly offset by an atypical $2.5 million correction to workers' compensation expense in states where the Company is not self-insured.


•	Europe – Gross profit margin increased to 38.2% in the first half of 2014 from 35.5% in the first half of 2013, as a result of decreases as a percentage of sales in factory overhead on increased volumes, shipping and warehouse costs and material costs.


•	Product mix – The gross profit margin differential between wood construction products and concrete construction products, which have lower gross profit margins, was 14% and 11% in the first half of 2014 and in the first half of 2013, respectively.

This negatively affected gross margins in North America, with concrete construction products representing 13% of North America net sales in the first half of each of 2014 and 2013, and in Europe, with concrete construction products representing 16% and 17% of Europe net sales in the first half of 2014 and the first half of 2013, respectively.


•	Steel prices – Steel prices have increased slightly from March 2014. Based on current estimates, the Company expects the market price for steel to increase during the second half of 2014.

Research and development and engineering expense

Research and development and engineering expense increased 11.3% to $19.8 million in the first half of 2014 from $17.8 million in the first half of 2013, primarily due to increases of $1.1 million in professional fees and $0.6 million in cash profit sharing. Software development costs of $1.7 million were capitalized in the first half of 2014 compared to no software development costs capitalized in the first half of 2013.


•	North America – Research and development and engineering expense increased $1.5 million, primarily due to increases of $0.8 million in professional fees, mostly for patent development and product testing, and $0.6 million in cash profit sharing.


•	Europe – Research and development and engineering expense increased $0.4 million, primarily due to an increase in professional fees.

Selling expense

Selling expense increased 7.0% to $46.0 million in the first half of 2014 from $43.0 million in the first half of 2013, primarily due to increases of $1.3 million in professional fees, $1.3 million in personnel costs and $0.6 million in cash profit sharing and commissions.


•	North America – Selling expense increased $2.3 million, primarily due to increases of $1.2 million in professional fees and $1.0 million in personnel costs related to the addition of staff in support of product and software development and pay rate increases instituted in January 2014.


•	Europe – Selling expense increased $0.5 million, primarily due to increases of $0.4 million in personnel costs and $0.1 million in professional fees.

General and administrative expense

General and administrative expense increased 3.8% to $56.4 million in the first half of 2014 from $54.4 million in the first half of 2013, primarily due to increases of $2.5 million in cash profit sharing, $1.3 million in personnel costs, $0.4 million in professional fees and $0.4 million in depreciation expense, partly offset by a $1.0 million impairment of fixed assets in the first half of 2013, which did not occur in the first half of 2014, and decreases of $0.8 million in net foreign currency loss and $0.3 million in amortization expense.

•

North America – General and administrative expense increased $3.7 million, primarily due to increases of $1.4 million in cash profit sharing, $0.7 million in personnel costs related to the addition of administrative and information technology staff and pay rate increases instituted in January 2014, $0.6 million in depreciation expense, $0.4 million in professional fees and $0.3 million in foreign currency losses, partly offset by a $0.6 million decrease in amortization expense.

•

Europe – General and administrative expense decreased by $1.6 million, primarily due to $1.0 million in impairment of fixed assets and decreases of $0.5 million in stock-based compensation, $0.3 million in professional fees and $0.2 million in depreciation expenses, as well as a $0.7 million decrease in foreign currency losses, partly offset by increases of $0.7 million in cash profit sharing and $0.4 million in personnel costs.

•

Administrative and all other – General and administrative expense decreased slightly, primarily due to a decrease of $0.3 million in foreign currency losses, partly offset by an increase of $0.3 million in cash profit sharing. Effective 2014, the Company reports rent revenue, mostly associated with its property in Vacaville, California, in general and administrative expense. Rent revenue in the first half of each of 2014 and 2013 was $0.5 million.

Income taxes

The effective income tax rate in the first half of 2014 was 37.2% compared to 39.8% in the first half of 2013. The effective income tax rate was lower due to reduced first half 2014 operating losses in the Europe and Asia/Pacific segments for which no tax benefit was recorded. Based on current information and subject to future events and circumstances, the Company estimates that its 2014 effective tax rate will be between 37% and 39%.

Recently Issued Accounting Standards

Liquidity and Sources of Capital

Cash Flows Used in Operating Activities

As of June 30, 2014, working capital was $498.7 million compared to $414.6 million at June 30, 2013, and $464.9 million at December 31, 2013. The increase in working capital from December 31, 2013, was primarily due to increases of $47.8 million in trade accounts receivable, net, and $21.3 million in inventory, and decreases of $7.8 million in trade accounts payable and $2.4 million in accrued profit sharing trust contributions. The increase in trade accounts receivable, net, was primarily due to seasonal increases in net sales during the second quarter of 2014 compared to the fourth quarter of 2013. Raw material inventories increased 11.3% as compared to December 31, 2013, while in-process and finished goods inventories increased 10.4% as compared to December 31, 2013, in anticipation of increased construction activity during the summer building season. The decrease in trade accounts payable was primarily due to decreased material purchases in the second quarter of 2014 compared to the fourth quarter of 2013. The decrease in accrued profit sharing trust was due to the 2013 contribution paid in the first quarter of 2014. The increase in working capital from December 31, 2013, was partly offset by decreases of $30.0 million in cash and cash equivalents and $4.0 million in other current assets and increases of $6.2 million in accrued cash profit sharing and commissions, $4.7 million in other accrued liabilities and $1.7 million in income taxes payable. The decrease in cash and cash equivalents was primarily due to an increase in inventory purchases and the payment of trade accounts payable and accrued profit sharing trust contributions. The decrease in other current assets was primarily due to the decrease in income taxes receivable. The increase in accrued cash profit sharing and commissions was due to higher net sales and operating profits in the second quarter of 2014 compared to the fourth quarter of 2013. The working capital change and changes in noncurrent assets and liabilities, combined with net income of $32.5 million and noncash expenses, primarily charges for depreciation, amortization and stock-based compensation totaling $21.0 million, resulted in net cash used in operating activities of $9.5 million. As of June 30, 2014, the Company had unused credit available of $304.6 million, including a $300.0 million credit facility.

As of June 30, 2013, working capital was $414.6 million as compared to $394.7 million at June 30, 2012, and $402.5 million at December 31, 2012. The increase in working capital from December 31, 2012, was primarily due to increases of $44.1 million in net trade accounts receivable and $1.4 million in deferred income taxes, and decreases of $7.5 million in trade accounts payable, and $2.0 million in accrued profit sharing trust contributions. The increase in net trade accounts receivable was primarily due to seasonal increases in net sales during the second quarter of 2013 compared to the fourth quarter of 2012. The decrease in trade accounts payable was primarily due to decreased material purchases in the second quarter of 2013 compared to the fourth quarter of 2012. The decrease in accrued profit sharing trust was due to the 2012 contribution paid in the first quarter of 2013. The increase in working capital from December 31, 2012, was partly offset by decreases of $15.0 million in other current assets, $10.3 million in cash and cash equivalents, and $7.9 million in inventories, and increases of $8.6 million in accrued cash profit sharing, and $1.0 million in line of credit and notes payable. The decrease in other current assets was primarily due to the decrease in income

taxes receivable, while the decrease in cash and cash equivalents was primarily due to payments of $9.8 million to repurchase Company common stock in the second quarter of 2013. Raw material inventories decreased 10.9% as compared to December 31, 2012, while in-process and finished goods inventories increased 2.4% as compared to December 31, 2012. The increase in accrued cash profit sharing was due to higher operating profits in the second quarter of 2013 compared to the fourth quarter of 2012. The increase in line of credit and notes payable was primarily from borrowing for working capital in Europe. The working capital change and changes in noncurrent assets and liabilities, combined with net income of $23.3 million and noncash expenses, primarily charges for depreciation, amortization, stock-based compensation and impairment of assets totaling $21.8 million, resulted in net cash provided by operating activities of $18.9 million.

Cash Flows Used in Investing Activities

For the six months ended June 30, 2014, the Company’s investing activities used cash of $9.0 million, including $9.3 million in capital expenditures, partly offset by proceeds from the sale of assets of $0.6 million. The Company’s capital expenditures were primarily to increase manufacturing capacity in North America and to improve information technology support systems. The Company estimates that its full-year capital spending will be $20.0 million to $23.0 million in 2014.

For the six months ended June 30, 2013, the Company’s investing activities used cash of $12.7 million, including $8.1 million in capital expenditures and $5.3 million for the acquisition of the ShearBrace product line from Weyerhaeuser, partly offset by a Keymark-related entity’s repayment of a loan of $0.6 million and proceeds from the sale of property and equipment of $0.1 million.

Cash Flows Used in Financing Activities

For the six months ended June 30, 2014, the Company’s financing activities used net cash of $10.9 million, including $12.2 million in dividend payments, $1.1 million in deferred purchase payments related to the 2012 S&P Clever acquisition and $0.2 million in contingent consideration also related to the 2012 S&P Clever acquisition, partly offset by $2.6 million from the issuance of common stock on the exercise of stock options. In July 2014, the Company’s Board of Directors declared a cash dividend of $0.14 per share, estimated to total $6.9 million, to be paid on October 23, 2014, to stockholders of record on October 2, 2014. The Company’s Board of Directors has authorized up to $50.0 million, all of which remained available at June 30, 2014, for the repurchase of common stock in 2014.

For the six months ended June 30, 2013, the Company’s financing activities used net cash of $14.0 million, including $9.8 million for the repurchase of common stock and $6.1 million in dividend payments, partly offset by $1.1 million cash provided by borrowings on credit facilities, primarily for working capital in Europe, and $0.8 million from the issuance of common stock on the exercise of stock options.

The Company believes that cash generated by operations and borrowings available under its credit facility will be sufficient for the Company’s working capital needs and planned capital expenditures for the next 12 months. Depending, however, on the Company’s future growth and possible acquisitions, it may become necessary to secure additional sources of financing, which may not be available on reasonable terms, or at all. The $300.0 million unsecured credit agreement will expire in July 2017.

A significant portion of the cash and cash equivalents held by the Company is in foreign currencies. Cash and cash equivalents of $90.6 million held in foreign countries could be subject to additional taxation if it were repatriated to the United States. The Company has no plans to repatriate cash and cash equivalents held outside the United States, as it is expected to be used to fund future international growth and acquisitions.

The Company believes that the effect of inflation on the Company has not been material in recent years, as general inflation rates have remained relatively low. Because, however, the Company’s main raw material is steel, increases in steel prices may adversely affect the Company’s gross profit margin if it cannot recover the higher costs through price increases.

Item 3. Quantitative and Qualitative Disclosures About Market Risk.

The Company has foreign exchange rate risk in its international operations, primarily Europe and Canada, and through purchases from foreign vendors. The Company does not currently hedge this risk. If the exchange rate were to change by 10% in any one country or currency where the Company has operations, the change in net income would not be material to the Company’s operations as a whole. The translation adjustment had no significant effect on other comprehensive income for the three months ended June 30, 2014. For the six months ended June 30, 2014, the translation adjustment resulted in an increase in accumulated other comprehensive income of $1.2 million.

Item 4. Controls and Procedures.

Disclosure Controls and Procedures. As of June 30, 2014, the Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the chief executive officer (“CEO”) and the chief financial officer (“CFO”), of the effectiveness of the Company’s disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")). Disclosure controls and procedures are controls and other procedures designed reasonably to assure that information required to be disclosed in the Company's reports filed or submitted under the Exchange Act, such as this Quarterly Report on Form 10-Q, is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms. Disclosure controls and procedures are also designed reasonably to assure that information is accumulated and communicated to the Company’s management, including the CEO and the CFO, as appropriate to allow timely decisions regarding required disclosures. Based on that evaluation, the CEO and the CFO concluded that the Company’s disclosure controls and procedures were not effective as a result of the material weaknesses that existed in its internal control over financial reporting as described below.

The Company’s management, including the CEO and the CFO, does not expect that the Company’s disclosure controls and procedures or the Company’s internal control over financial reporting will necessarily prevent all fraud and material errors. Internal control over financial reporting, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. In addition, the design of a control system must reflect the facts that there are resource constraints and that the benefits of controls must be considered relative to their costs. The inherent limitations in internal control over financial reporting include the realities that judgments can be faulty and that breakdowns can occur because of simple error or mistake. Controls also can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of controls. The design of any system of internal control is also based in part on assumptions about the likelihood of future events, and there can be only reasonable, not absolute, assurance that any design will succeed in achieving its stated goals under all potential events and conditions. Over time, controls may become inadequate because of changes in circumstances, or the degree of compliance with the policies and procedures may deteriorate.

Notwithstanding the material weaknesses discussed below, the Company’s management, including the CEO and CFO, concluded that the interim condensed consolidated financial statements in this quarterly report on Form 10-Q fairly present, in all material respects, the Company’s financial condition, results of operations and cash flows for the periods presented, in conformity with accounting principles generally accepted in the United States (“GAAP”).

Material Weaknesses. A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis. Management identified the following material weaknesses as of December 31, 2013, which remained unremediated at June 30, 2014:

(a) The Company’s management did not design and maintain effective controls over the valuation of goodwill. Specifically, management did not design a review precise enough to determine the accuracy and support of certain forecasts and assumptions related to the goodwill impairment assessments. This material weakness resulted in errors in the Company’s step-one goodwill impairment models, which were not detected by its internal control review process.

(b) The Company’s management did not design and maintain effective internal controls related to the valuation of indefinite-lived in-process research and development intangible assets. Specifically, management did not design a process or controls to evaluate impairments at the individual asset level in accordance with GAAP.

While the Company’s management concluded that these material weaknesses did not result in any misstatements, they could result in a misstatement of the aforementioned account balances or disclosures that would result in a material misstatement in the annual or interim consolidated financial statements that would not be prevented or detected.

Remediation. The Company’s management has been actively engaged in developing a comprehensive remediation plan to address fully such material weaknesses. The Company's plan to address the material weaknesses was finalized during the second quarter of 2014, and included the following:


•	enhancing the controls over the review of the annual goodwill assessment for impairment; and


•	designing an appropriate process and controls to perform the annual assessment of indefinite-lived intangible assets for impairment in accordance with GAAP.

Remediation will not be completed until the fourth quarter of 2014, when the annual impairment assessments are completed and reviewed by management.

The Company’s management believes the foregoing efforts will effectively remediate such material weaknesses. As management continues to evaluate and work to improve the Company’s internal control over financial reporting, management may determine to take additional measures to address such material weaknesses or determine to modify the remediation plan described above.

Changes in Internal Control over Financial Reporting. During the three months ended June 30, 2014, the Company made no changes to its internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) that have materially affected, or are reasonably likely to materially affect, its internal control over financial reporting.

PART II — OTHER INFORMATION

Item 1. Legal Proceedings.

From time to time, the Company is involved in various legal proceedings and other matters arising in the normal course of business.

Four lawsuits (the “Cases”) have been filed against the Company in the Hawaii First Circuit Court: Alvarez v. Haseko Homes, Inc. and Simpson Manufacturing, Inc., Civil No. 09-1-2697-11 (“Case 1”); Ke Noho Kai Development, LLC v. Simpson Strong-Tie Company, Inc., and Honolulu Wood Treating Co., LTD., Case No. 09-1-1491-06 SSM (“Case 2”); North American Specialty Ins. Co. v. Simpson Strong-Tie Company, Inc. and K.C. Metal Products, Inc., Case No. 09-1-1490-06 VSM (“Case 3”); and Charles et al. v. Haseko Homes, Inc. et al. and Third Party Plaintiffs Haseko Homes, Inc. et al. v. Simpson Strong-Tie Company, Inc., et al., Civil No. 09-1-1932-08 (“Case 4”). Case 1 was filed on November 18, 2009. Cases 2 and 3 were originally filed on June 30, 2009. Case 4 was filed on August 19, 2009. The Cases all relate to alleged premature corrosion of the Company’s strap tie holdown products installed in buildings in a housing development known as Ocean Pointe in Honolulu, Hawaii, allegedly causing property damage. Case 1 is a putative class action brought by the owners of allegedly affected Ocean Pointe houses. Case 1 was originally filed as Kai et al. v. Haseko Homes, Inc., Haseko Construction, Inc. and Simpson Manufacturing, Inc., Case No. 09-1-1476, but was voluntarily dismissed and then re-filed with a new representative plaintiff. Case 2 is an action by the builders and developers of Ocean Pointe against the Company, claiming that either the Company’s strap tie holdowns are defective in design or manufacture or the Company failed to provide adequate warnings regarding the products’ susceptibility to corrosion in certain environments. Case 3 is a subrogation action brought by the insurance company for the builders and developers against the Company claiming the insurance company expended funds to correct problems allegedly caused by the Company’s products. Case 4 is a putative class action brought, like Case 1, by owners of allegedly affected Ocean Pointe homes. In Case 4, Haseko Homes, Inc. (“Haseko”), the developer of the Ocean Pointe development, brought a third party complaint against the Company alleging that any damages for which Haseko may be liable are actually the fault of the Company. Similarly, Haseko’s sub-contractors on the Ocean Pointe development brought cross-claims against the Company seeking indemnity and contribution for any amounts for which they may ultimately be found liable. None of the Cases alleges a specific amount of damages sought, although each of the Cases seeks compensatory damages, and Case 1 seeks punitive damages. Cases 1 and 4 have been consolidated. In December 2012, the Court granted the Company summary judgment on the claims asserted by the plaintiff homeowners in Cases 1 and 4, and on the third party complaint and cross-claims asserted by Haseko and the sub-contractors, respectively, in Case 4. In April 2013, the Court granted Haseko and the sub-contractors’ motion for leave to amend their cross-claims to allege a claim for negligent misrepresentation. The Company continues to investigate the facts underlying the claims asserted in the Cases, including, among other things, the cause of the alleged corrosion; the severity of any problems shown to exist; the buildings affected; the responsibility of the general contractor, various subcontractors and other construction professionals for the alleged damages; the amount, if any, of damages suffered; and the costs of repair, if needed. At this time, the likelihood that the Company will be found liable under any legal theory, and the extent of such liability, if any, are unknown. Management believes the Cases may not be resolved for an extended period in the absence of agreement to settle the Cases and other related legal proceedings (discussed below). The Company is defending itself vigorously in connection with the Cases.

On November 21, 2011, the Company commenced a lawsuit against National Union, Fireman’s Fund, Hartford and others in the Superior Court of the State of California in and for the City and County of San Francisco (the “San Francisco coverage action”). In the San Francisco coverage action, the Company alleges generally that the separate pendency of the National Union action and the Fireman’s Fund action presents a risk of inconsistent adjudications; that the San Francisco Superior Court has jurisdiction over all of the parties and should exercise jurisdiction at the appropriate time to resolve any and all disputes that have arisen or may in the future arise among the Company and its liability insurers; and that the San Francisco coverage action should also be stayed pending resolution of the underlying Ocean Pointe Cases. The San Francisco coverage action has been ordered stayed pending resolution of the Cases.

Nishimura v. Gentry Homes, Ltd; Simpson Manufacturing Co., Inc.; and Simpson Strong-Tie Company, Inc., Civil no. 11-1-1522-07, was filed in the Circuit Court of the First Circuit of Hawaii on July 20, 2011. The Nishimura case alleges premature corrosion of the Company’s strap tie holdown products in a housing development at Ewa Beach in Honolulu, Hawaii. In February 2012, the Court dismissed three of the five claims the plaintiffs had asserted against the Company. In December 2013, the Court granted the Company’s motion for summary judgment on the remaining claims. Currently, the case is closed, though it remains subject to appeal.

Item 1A. Risk Factors

We are affected by risks specific to us, as well as risks that generally affect businesses operating in global markets. Some of the significant factors that could materially adversely affect our business, financial condition and operating results appear in “Item 1A. Risk Factors” of our most recent Annual Report on Form 10-K (available at www.simpsonmfg.com/docs/10K-2013.pdf or www.sec.gov).

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.

In February 2014, the Board of Directors authorized the Company to repurchase up to $50.0 million of the Company’s common stock. This replaced the $50.0 million repurchase authorization from February 2013. The authorization will remain in effect through the end of 2014. There were no purchases by the Company during the second quarter of 2014.

Item 6. Exhibits.

The following exhibits are either incorporated by reference into this report or filed with this report, as indicated below.


3.1	Certificate of Incorporation of Simpson Manufacturing Co., Inc., as amended, is incorporated by reference to Exhibit 3.1 of its Quarterly Report on Form 10-Q for the quarter ended September 30, 2007.


3.2	Bylaws of Simpson Manufacturing Co., Inc., as amended through February 3, 2014, are incorporated by reference to Exhibit 3.2 of its Current Report on Form 8-K dated February 3, 2014.


4.1	Amended Rights Agreement dated as of June 15, 2009, between Simpson Manufacturing Co., Inc. and Computershare Trust Company, N.A., which includes as Exhibit B the form of Rights Certificate, is incorporated by reference to Exhibit 4.1 of Simpson Manufacturing Co., Inc.’s Registration Statement on Form 8-A/A dated June 15, 2009.


4.2	Certificate of Designation, Preferences and Rights of Series A Participating Preferred Stock of Simpson Manufacturing Co., Inc., dated July 30, 1999, is incorporated by reference to Exhibit 4.2 of its Registration Statement on Form 8-A dated August 4, 1999.


4.3	Simpson Manufacturing Co., Inc. 401(k) Profit Sharing Plan for Salaried Employees is incorporated by reference to Exhibit 4.3 of Simpson Manufacturing Co., Inc.’s Registration Statement on Form S-8, File Number 333-173811, dated April 29, 2011.


4.4	Simpson Manufacturing Co., Inc. 401(k) Profit Sharing Plan for Hourly Employees is incorporated by reference to Exhibit 4.4 of Simpson Manufacturing Co., Inc.’s Registration Statement on Form S-8, File Number 333-173811, dated April 29, 2011.


10.1	Simpson Manufacturing Co., Inc. 1994 Stock Option Plan, as amended through February 13, 2008, is incorporated by reference to Exhibit 10.1 of Simpson Manufacturing Co., Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008.


10.2	Simpson Manufacturing Co., Inc. 1995 Independent Director Stock Option Plan, as amended through November 18, 2004, is incorporated by reference to Exhibit 10.2 of Simpson Manufacturing Co., Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2008.


10.3	Simpson Manufacturing Co., Inc. Executive Officer Cash Profit Sharing Plan, as amended through February 25, 2008, is incorporated by reference to Exhibit A of Simpson Manufacturing Co., Inc.’s Schedule 14A Proxy Statement dated March 8, 2013.

10.4

Credit Agreement, dated as of July 27, 2012, among Simpson Manufacturing Co., Inc. as Borrower, the Lenders party thereto, Wells Fargo Bank, National Association, in its separate capacities as Swing Line Lender and L/C issuer and as Administrative Agent, and Simpson Strong-Tie Company Inc., and Simpson Strong-Tie International, Inc. as Guarantors, is incorporated by reference to Exhibit 10.1 of Simpson Manufacturing Co., Inc.’s Current Report on Form 8-K dated August 1, 2012.


10.5	Form of Indemnification Agreement between Simpson Manufacturing Co., Inc. and its directors and executive officers, as well as the officers of Simpson Strong-Tie Company Inc., is incorporated by reference to Exhibit 10.2 of Simpson Manufacturing Co., Inc.’s Annual Report on Form 10-K for the year ended December 31, 2004.


10.6	Compensation of Named Executive Officers is incorporated by reference to Exhibit 10 of Simpson Manufacturing Co., Inc.’s Current Report on Form 8-K dated December 11, 2013.


10.7	Compensation of Named Executive Officers is incorporated by reference to Exhibit 10 of Simpson Manufacturing Co., Inc.’s Current Report on Form 8-K dated February 26, 2014.


10.8	Compensation of Named Executive Officers is incorporated by reference to Simpson Manufacturing Co., Inc.’s Schedule 14A Proxy Statement dated March 10, 2014.


10.9	Compensation of Named Executive Officers is incorporated by reference to Item 5.02 of Simpson Manufacturing Co., Inc.’s Current Report on Form 8-K dated April 22, 2014.


10.10	Simpson Manufacturing Co., Inc. 2011 Incentive Plan is incorporated by reference to Exhibit A of Simpson Manufacturing Co., Inc.’s Schedule 14A Proxy Statement dated March 10, 2011.


10.11	Separation agreement dated as of July 3, 2013, between Michael J. Herbert, Vice President of Simpson Manufacturing Co., Inc., on the one hand, and Simpson Manufacturing Co., Inc., on the other hand, is incorporated by reference to Exhibit 10.11 of Simpson Manufacturing Co., Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2013.


31	Rule 13a-14(a)/15d-14(a) Certifications are filed herewith.


32	Section 1350 Certifications are filed herewith.


99.1	Simpson Manufacturing Co., Inc. 1994 Employee Stock Bonus Plan, as amended through November 18, 2004, is incorporated by reference to Exhibit 99.1 of Simpson Manufacturing Co., Inc.’s Annual Report on Form 10-K for the year ended December 31, 2007.

101

Financial statements from the quarterly report on Form 10-Q of Simpson Manufacturing Co., Inc. for the quarter ended June 30, 2014, formatted in XBRL, are filed herewith and include: (i) the Condensed Consolidated Balance Sheets, (ii) the Condensed Consolidated Statements of Operations, (iii) the Condensed Consolidated Statements of Comprehensive Income, (iv) the Condensed Consolidated Statements of Stockholders’ Equity, (v) the Condensed Consolidated Statements of Cash Flows and (vi) the Notes to Condensed Consolidated Financial Statements.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.



		Simpson Manufacturing Co., Inc.
		(Registrant)


DATE:	August 7, 2014	By /s/Brian J. Magstadt
		Brian J. Magstadt
		Chief Financial Officer
		(principal accounting and financial officer)