TECHPRECISION CORP - Quarter Report: 2018 December (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

(Mark One)

x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended December 31, 2018

OR

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from __________________ to __________________

Commission File Number: 000-51378

TechPrecision Corporation

(Exact name of registrant as specified in its charter)

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.     ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). 

The number of shares outstanding of the registrant’s common stock as of February 8, 2019 was 28,949,593. 

TABLE OF CONTENTS

PART I.

ITEM 1. FINANCIAL STATEMENTS

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED BALANCE SHEETS (Unaudited)

See accompanying notes to the condensed consolidated financial statements.

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS) (Unaudited)

See accompanying notes to the condensed consolidated financial statements.

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (Unaudited)

See accompanying notes to the condensed consolidated financial statements.

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS (Unaudited)

See accompanying notes to the condensed consolidated financial statements.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (Unaudited)

NOTE 1 - DESCRIPTION OF BUSINESS

TechPrecision Corporation, or TechPrecision, is a Delaware corporation organized in February 2005 under the name Lounsberry Holdings II, Inc. The name was changed to TechPrecision Corporation on March 6, 2006. TechPrecision is the parent company of Ranor, Inc., or Ranor, a Delaware corporation and Wuxi Critical Mechanical Components Co., Ltd., or WCMC, a wholly foreign owned enterprise. TechPrecision, WCMC and Ranor are collectively referred to as the “Company”, “we”, “us” or “our”.

We manufacture large scale metal fabricated and machined precision components and equipment. These products are used in a variety of markets including defense, aerospace, nuclear, medical, and precision industrial.

NOTE 2 - BASIS OF PRESENTATION AND SIGNIFICANT ACCOUNTING POLICIES

Basis of Presentation and Consolidation - The accompanying condensed consolidated financial statements include the accounts of TechPrecision, Ranor and WCMC. Intercompany transactions and balances have been eliminated in consolidation. The accompanying condensed consolidated balance sheets as of December 31, 2018 and March 31, 2018, the condensed consolidated statements of operations and comprehensive income (loss) for the three and nine months ended December 31, 2018 and 2017, and the condensed consolidated statements of stockholders’ equity for the three and nine months ended December 31, 2018 and 2017, and the condensed consolidated statements of cash flows for the nine months ended December 31, 2018 and 2017 are unaudited, but, in the opinion of management, include all adjustments that are necessary for a fair presentation of our financial statements for interim periods in accordance with U.S. Generally Accepted Accounting Principles, or U.S. GAAP. All adjustments are of a normal, recurring nature, except as otherwise disclosed. The results of operations for an interim period are not necessarily indicative of the results of operations to be expected for the fiscal year.

These notes to the Condensed Consolidated Financial Statements have been prepared pursuant to the rules and regulations of the Securities and Exchange Commission, or the SEC, for Quarterly Reports on Form 10-Q. Certain information and disclosures normally included in financial statements prepared in accordance with U.S. GAAP have been condensed or omitted pursuant to such rules and regulations. These unaudited financial statements and related notes should be read in conjunction with the consolidated financial statements included with our Annual Report on Form 10-K for the fiscal year ended March 31, 2018, or the 2018 Form 10-K, filed with the SEC on June 28, 2018.

Accounting Estimates - The preparation of the Company's unaudited condensed consolidated financial statements requires management to make estimates and judgments that affect the reported amounts of assets and liabilities and the disclosure of contingencies at the date of the financial statements, as well as the reported amounts of revenues and expenses during the reporting period. Estimates have been prepared on the basis of the most current and best available information, and actual results could differ materially from those estimates.

Revenue Recognition - Effective April 1, 2018, the Company adopted the requirements of Accounting Standards Update (ASU) 2014-09, Revenue from Contracts with Customers (Topic 606), or ASC 606, and related amendments. Prior to April 1, 2018, the Company recognized revenue in accordance with Accounting Standards Codification (ASC) Topic 605 - Revenue Recognition, or ASC 605, utilizing the units of delivery measure of the percentage-of-completion method of accounting. For additional information on the new standard and the impact on our results of operations, refer to Note 3: Accounting Standards Updates.

ASC 606 sets forth five steps for revenue recognition: identification of the contract, identification of any separate performance obligations in the contracts, determination of the transaction price, allocation of the transaction price to separate performance obligations, and revenue recognition when performance obligations are satisfied.

The Company recognizes revenue over time based on the transfer of control of the promised goods or services to the customer. This transfer will occur over time when the Company’s performance does not create an asset that has an alternative use to the Company and the Company has an enforceable right to payment for performance completed to date. Otherwise, control to the promised goods or services transfers to customers at a point in time.

The majority of the Company’s contracts have a single performance obligation and provide title to, or grant a security interest in, work-in-process to the customer. In addition, these contracts contain enforceable rights to payment, allowing the Company to recover both its cost and a reasonable margin on performance completed to date. The combination of these factors indicates that the customer controls the asset and revenue is recognized as the asset is created or enhanced. The Company measures progress for performance obligations satisfied over time using input methods (e.g., costs incurred, resources consumed, labor hours expended, and time elapsed).

Under arrangements where the customer does not have title to, or a security interest in, the work-in-process, our evaluation of whether revenue should be recognized over time requires significant judgment about whether the asset has an alternative use and whether the entity has an enforceable right to payment for performance completed to date. When one or both of these factors is not present, the Company will recognize revenue at the point in time where control over the promised good or service transfers to the customer, i.e. when the customer has taken physical possession of the product the Company has built for the customer.

The Company and its customers occasionally enter into contract modifications, including change orders. The Company may account for the modification as a separate contract, the termination of an old contract and creation of a new contract, or as part of the original contract, depending on the nature and pricing of the goods or services included in the modification. In general, contract modifications - as well as other changes in estimates of sales, costs, and profits on a performance obligation - are recognized using the cumulative catch-up method of accounting. This method recognizes in the current period the cumulative effect of the changes in current and prior periods. A significant change in an estimate on one or more contracts in a period could have a material effect on the consolidated balance sheet or results of operations for that period. For the nine months ended December 31, 2018, net cumulative catch-up adjustments were not material. No individual adjustment was material to the Company's condensed consolidated statements of operations and comprehensive income for the nine months ended December 31, 2018.

If incentives and other contingencies are provided as part of the contract, the Company will include in the initial transaction price the consideration to which it expects to be entitled under the terms and conditions of the contract, generally estimated using an expected value or most likely amount approach. In the context of variable consideration, the Company limits, or constrains, the transaction price to amounts for which the Company believes a significant reversal of revenue is not probable. Adjustments to constrain the transaction price, may be due to a portion of the transaction price being in excess of approved funding, a lack of history with the customer, a lack of history with the goods or services being provided, or other items.

Shipping and handling fees and costs incurred in connection with products sold under ASC 606 are recorded in cost of sales in the condensed consolidated statements of operations, and are not considered a performance obligation to our customers.

Contract Estimates - In estimating contract costs, the Company takes into consideration a number of assumptions and estimates regarding risks related to technical requirements and scheduling. Management performs periodic reviews of the contracts to evaluate the underlying risks. Profit margin on any given project could increase if the Company is able to mitigate and retire such risks. Conversely, if the Company is not able to properly manage these risks, cost estimates may increase, resulting in a lower profit margin, or potentially, contract losses.

The cost estimation process requires significant judgment and is based upon the professional knowledge and experience of the Company’s engineers, program managers, and financial professionals. Factors considered in estimating the work to be completed and ultimate contract recovery include the availability, productivity, and cost of labor, the nature and complexity of the work to be performed, the effect of change orders, the availability of materials, the effect of any delays in performance, the availability and timing of funding from the customer, and the recoverability of any claims included in the estimates to complete. Costs allocable to undelivered units are reported as work in process, a component of inventory, in the condensed consolidated balance sheet. Pre-contract fulfillment costs requiring capitalization are not material.

Accounts Receivable - Accounts receivable are comprised of amounts billed and currently due from customers. Accounts receivable are amounts related to any unconditional right the Company has to receive consideration and are presented as receivables in the condensed consolidated balance sheets. The Company reports accounts receivable net of an allowance for doubtful accounts. There was no allowance for doubtful accounts recorded at December 31, 2018 and March 31, 2018.

Inventories - Work-in-process and raw materials are stated at the lower of cost or net realizable value. Cost is determined by the first-in, first-out (FIFO) method.

Contract Assets - Contract assets represent the Company’s rights to consideration for work completed but not billed as of the reporting date when the right to payment is not just subject to the passage of time, including retention amounts. Contract assets are transferred to accounts receivable when the right becomes unconditional.

Contract Liabilities - Contract liabilities are comprised of advance payments, billings in excess of revenues, and deferred revenue amounts. Such advances are not generally considered a significant financing component, because they are utilized to pay for contract costs within a one year period. Contract liability amounts are recognized as revenue once control over the underlying performance obligation has transferred to the customer.

NOTE 3 - ACCOUNTING STANDARDS UPDATES

New Accounting Standards Recently Adopted 

Effective April 1, 2018, the Company adopted the requirements of ASU 2014-09, which provides a single revenue recognition model for the transfer of promised goods or services in a manner reflective of the consideration we are entitled to in exchange for those goods or services. The Company applied the new revenue guidance retrospectively with a cumulative effect adjustment to retained earnings at April 1, 2018 for initial application of the guidance (modified retrospective method). Results for reporting periods beginning after April 1, 2018, are presented under ASC 606, while prior period amounts are not adjusted and are reported in accordance with the Company's historic accounting practices under ASC 605.

With the adoption of ASC 606 the Company changed its revenue recognition model to reflect recognition of revenue. Revenue is now be recognized at a point in time, or over time using an inputs based methodology that recognizes revenue on cost incurred and labor hours expended, which is different than the units-of-delivery methodology previously utilized under ASC 605. The Company also modified and expanded its disclosures as they relate to revenues and contract balances under ASC 606.

In conformity with the new revenue guidelines, unbilled accounts receivable are classified as contract assets and advance payments and billings in excess of revenue are classified as contract liabilities as of December 31, 2018 and March 31, 2018.

The adoption of ASC 606 resulted in a cumulative increase to retained earnings of $19,647, net of $7,385 of tax expense, as of April 1, 2018, driven by changes in contract assets and liabilities. For the three and nine months ended December 31, 2018, we recorded additional revenue of $2.4 million and $6.3 million, respectively, due to the change in revenue recognition when compared to ASC 605. Under ASC 605 the Company did not recognize revenue prior to delivery if payment, title, risk of loss was tied to delivery. The new guidance has been applied to all incomplete contracts at the date of initial application. The following table compares the opening and closing balances for inventories, contract assets and contract liabilities: 

The following tables summarize the impact of the adoption of ASC 606 on the condensed consolidated financial statements. The adjustments are the result of timing differences between the recognition of revenue under ASC 606 and ASC 605. Under ASC 605 the Company did not recognize revenue prior to delivery if payment, title, or risk of loss was tied to delivery. Under ASC 606, the Company generally recognizes revenue over time prior to delivery, as control over the promised goods and services transfers to the customer.

Effective April 1, 2018, the Company adopted ASU 2016-16, Income Taxes (Topic 740): Intra Entity Transfers of Assets Other Than Inventory. The guidance in ASU 2016-16 requires companies to recognize the income tax consequences of an intra-entity transfer of an asset other than inventory when the transfer occurs. As such, the Company was required to remeasure an unrecognized deferred tax asset created from the repurchase of land and building from a certain variable interest entity in 2010. The modified retrospective approach was used to transition to the new guidance, with a cumulative-effect adjustment recorded in retained earnings as of the beginning of the period of adoption. The adoption of ASU 2016-16 resulted in a cumulative increase to retained earnings of $0.4 million as of April 1, 2018.

Issued Standards Not Yet Adopted

In July 2018, the Financial Accounting Standards Board, or FASB, issued ASU 2018-11, Leases (Topic 842): Targeted Improvements. This amendment provides entities with an additional and optional transition method to adopt the new leases standard. Under the new transition method, an entity can initially apply the new leases standard at the adoption date and recognize a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. As a result, an entity’s reporting for the comparative periods presented in the financial statements in which it adopts the new leases standard will continue to be in accordance with current GAAP (Topic 840, Leases). ASU 2018-11 is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years, with early application permitted. We are currently evaluating the impact ASU 2018-11 will have on our financial statements and disclosures.

In June 2018, the FASB issued ASU 2018-07, Compensation - Stock Compensation (Topic 718) Improvements to Nonemployee Share-Based Payment Accounting. This guidance expands the scope of accounting for share-based payment arrangements to include share-based payment transactions for acquiring goods and services from nonemployees. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2018. We are currently evaluating the impact that ASU 2018-07 will have on our financial statements and disclosures.

In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842). Under this amendment, lessees will be required to recognize the following for all leases (with the exception of short-term leases) at the commencement date: 1) a lease liability which is a lessee’s obligation to make lease payments arising from a lease, measured on a discounted basis, and 2) a right-of-use asset, which is an asset that represents the lessee’s right to use, or control the use of, a specified asset for the lease term. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years, with early application permitted. We are currently evaluating the impact ASU 2016-02 will have on our financial statements and disclosures.

NOTE 4 - REVENUE

The Company generates its revenues primarily from performance obligations completed under contracts with customers in three main market sectors: defense, energy and precision industrial. The period over which the Company performs is generally less than one year. The Company generally invoices and receives related payments based upon performance progress not less frequently than monthly.

Revenue is recognized over-time or at a point-in-time given the terms and conditions of the related contracts. The Company utilizes an inputs methodology based on estimated labor hours to measure performance progress. This model best depicts the transfer of control to the customer.

The Company’s contract portfolio is comprised of fixed-price contracts and provide for product type sales only. The following table presents net sales on a disaggregated basis by market and contract type:

As of December 31, 2018, the Company had $14.1 million of remaining performance obligations, of which $11.1 million were less than 50% complete. The Company expects to recognize all of its remaining performance obligations as revenue before the end of fiscal year 2020.

We have been dependent in each year on a small number of customers who generate a significant portion of our business, and these customers change from year to year. The following table sets forth information as to net sales from customers who accounted for more than 10% of our net sales for the periods ended: 

*Less than 10% of total 

NOTE 5 - CONTRACT ASSETS and CONTRACT LIABILITIES

Contract assets primarily relate to the Company's rights to consideration for work completed but not billed as of the reporting date when the right to payment is not just subject to the passage of time. Fixed-price contracts are generally billed to the customer using either progress payments, whereby amounts are billed monthly as costs are incurred or work is completed, or performance-based payments, which are based upon the achievement of specific, measurable events or accomplishments defined and valued at contract inception. Contract liabilities relate to advance payments, billings in excess of revenues, and deferred revenue amounts. We also receive deposits representing down payments for acquisition of materials.

Revenue recognized over time gives rise to contract assets, which represent revenue recognized but unbilled.  Contract assets are included in the condensed consolidated balance sheets as a component of current assets. The $5.9 million increase in contract assets from April 1, 2018 to December 31, 2018 is due primarily to the Company’s change in accounting policy (see Note 2) and transition from a units-of-delivery revenue recognition policy to a model that recognizes revenue over time as asset ownership is transferred to the customer. Our contract liabilities increased by $3.8 million primarily due to an increase in customer deposits and milestone payments in connection with new projects started since March 31, 2018.

NOTE 6 - INVENTORIES 

NOTE 7 - OTHER CURRENT ASSETS 

NOTE 8 - PROPERTY, PLANT AND EQUIPMENT, NET 

Depreciation expense, which includes amortization of equipment under capital leases, for the three and nine months ended December 31, 2018 and 2017 was $186,511 and $558,571, and $172,218 and $523,640, respectively.

Capitalized leases included in property, plant and equipment were $54,376 at both December 31, 2018 and March 31, 2018. Accumulated depreciation on all property, plant and equipment accounted for as capitalized leases was $21,750 and $13,594 at December 31, 2018 and March 31, 2018, respectively.

We capitalize interest on borrowings during the active construction period of major capital projects. Capitalized interest is added to the cost of the underlying assets and is amortized over the useful lives of the assets. Capitalized interest for the periods ended December 31, 2018 and March 31, 2018 was $2,882 and $14,791, respectively.

NOTE 9 - ACCRUED EXPENSES  

NOTE 10 - DEBT

Berkshire Bank Loan Facility

On December 21, 2016, pursuant to the Loan Agreement dated December 20, 2016, or the Berkshire Loan Agreement, Berkshire Bank made a term loan to Ranor in the amount of $2,850,000, or the Term Loan, and made available to Ranor a revolving line of credit in the amount of $1,000,000, or the Revolver Loan, and together with the Term Loan, collectively, the Berkshire Loans.  The Berkshire Loans are secured by a first lien on all personal and real property of Ranor.  On January 20, 2017, payments on the Term Loan began and will be made in 60 monthly installments of $19,260 each, inclusive of interest at a fixed rate of 5.21% per annum, with all outstanding principal and accrued interest due and payable on December 20, 2021.

On December 19, 2018, the Company entered into a Second Modification to Loan Agreement and First Modification and Allonge to Promissory Note with Berkshire Bank, or the Modification. The Modification amends and modifies each of the Loan Agreement between Ranor and Berkshire dated December 20, 2016, as modified by the previously disclosed First Modification to Loan Agreement dated June 6, 2018, and the Promissory Note dated December 20, 2016 made by Ranor in favor of Berkshire in the stated principal amount of $1,000,000. Under the terms of the Loan Agreement and the Line of Credit Note, Ranor was entitled to borrow up to $1,000,000 on a revolving basis. As of the date of the Modification, there were no amounts outstanding under the Revolver Loan. The maturity date of the Revolver Loan was originally December 20, 2018. Under the Modification, the maturity date of the Revolver Loan was extended until December 20, 2020. The Company paid $7,245 of expenses related to the execution of the Modification.

There were no amounts outstanding under the Revolver Loan at December 31, 2018 or March 31, 2018. The Company pays, as consideration for the bank’s commitment to make advances under the Revolver Loan, a nonrefundable commitment fee equal to 0.25% per annum on the average daily difference between the amount of $1,000,000 and the aggregate amount of all advances made under the Revolver Loan as of each quarterly period. Ranor’s obligations under the Berkshire Loan Agreement are guaranteed by TechPrecision.

The Berkshire Loan Agreement contains a covenant whereby the Company is required to maintain a debt service coverage ratio or DSCR, of at least 1.2 to 1.0 during the term of the Berkshire Loans.  The DSCR is measured at the end of each fiscal quarter of the Company.  Pursuant to the Berkshire Loan Agreement, Ranor covenants to cause its balance sheet leverage to be less than or equal to 3.00 to 1.00 for the fiscal year ending March 31, 2018, and less than or equal to 2.50 to 1.00 for the fiscal year ending March 31, 2019 and each fiscal year end thereafter. The leverage ratio was 0.78 to 1.00 at March 31, 2018. Also, Ranor’s annual capital expenditures cannot exceed $2,500,000 for the fiscal year ended March 31, 2019, and $1,500,000 for the fiscal year ending March 31, 2020 and each fiscal year end thereafter.  The Berkshire Loan Agreement contains an additional covenant whereby Ranor is required to maintain a loan-to-value ratio of not greater than 0.75 to 1.00, to be measured by appraisal not more frequently than one time during each 365-day period. At December 31, 2018, the Company was in compliance with the Berkshire Loan Agreement.

The Berkshire Loans may be accelerated upon the occurrence of an “Event of Default” (as defined in the Berkshire Loan Agreement).  Some of the Events of Default are subject to certain cure periods. Subject to the lapse of any applicable cure period, a default under the Berkshire Loans could cause the acceleration of all outstanding obligations under the Berkshire Loans.

At March 31, 2018, the Company failed to maintain the required DSCR as defined in the Berkshire Loan Agreement. On June 6, 2018, the Company executed a waiver and modification agreement with Berkshire Bank under which Berkshire Bank waived the Company’s noncompliance with the DSCR at March 31, 2018, and agreed to modify the definition of cash flows in the Berkshire Loan Agreement. Subject to the lapse of any applicable cure period, a default under the Berkshire Loan Agreement could have caused the acceleration of all outstanding obligations under the loan. If the lender had demanded repayment and caused the debt to be considered a short-term obligation, the Company would have been unable to pay the obligation because the Company does not have existing facilities or sufficient cash on hand to satisfy these obligations. The waiver does not apply to any future periods. Concurrent with the execution and delivery of this amendment, the Company agreed to pay Berkshire Bank all expenses incurred in connection with the amendment.  

Unamortized debt issue costs under the Berkshire Loans at December 31, 2018 and March 31, 2018 were $43,319 and $45,936, respectively.

Collateral securing the above obligations comprises all personal and real property of TechPrecision and Ranor, including cash, accounts receivable, inventories, equipment, financial and intangible assets.

People’s Capital and Leasing Corp. Equipment Loan Facility

On April 26, 2016, TechPrecision, through Ranor, executed and closed a Master Loan and Security Agreement No. 4180, as supplemented with Schedule No. 001, or, together, the MLSA, with People’s Capital and Leasing Corp., or People’s.  The MLSA was dated and effective as of March 31, 2016. Pursuant to the MLSA, People’s loaned $3,011,648 to Ranor, or the People’s Loan. The People’s Loan is secured by a first lien on certain machinery and equipment of Ranor, or the Equipment Collateral.  Payments on the People’s Loan will be made in 60 monthly installments of $60,921 each, inclusive of interest, at a fixed rate of 7.90% per annum.  The People’s Loan may be accelerated upon the occurrence of an “Event of Default” (as defined in the MLSA). Some of the Events of Default are subject to certain cure periods.

On October 4, 2016, TechPrecision and Ranor became committed to Schedule No. 002 to the MLSA, or Schedule 2. Pursuant to Schedule 2, People’s made an additional loan in the amount of $365,852, or the Additional People’s Loan, to Ranor upon the terms and conditions set forth in the MLSA and Schedule 2. The Additional People’s Loan is guaranteed by TechPrecision pursuant to the original Corporate Guaranty from TechPrecision in favor of People’s dated March 31, 2016.  The Additional People’s Loan is secured by a security interest in certain machinery and equipment of Ranor as provided in Schedule 2.

Under our loan with People’s, the Company is required to meet certain financial covenants applicable while the debt remains outstanding, including among other things, that the Company maintain a DSCR of at least 1.5 to 1.0 during the term of the People’s Loan. The DSCR is measured at the end of each fiscal year of the Company. At March 31, 2018, the Company was in violation of the DSCR covenant. On May 22, 2018, the Company obtained a waiver of the breach of such covenant from People’s, which waiver covered the breach that otherwise would have occurred in connection with the DSCR testing at March 31, 2018. Subject to the lapse of any applicable cure period, a default under the People’s Loan could have caused the acceleration of all outstanding obligations under the People’s Loan. If the lender had demanded repayment and caused the debt to be considered a short-term obligation, the Company would have been unable to pay the obligation because the Company does not have existing facilities or sufficient cash on hand to satisfy these obligations. This waiver does not apply to any future periods. Concurrent with the execution and delivery of the waiver, the Company agreed to pay People’s a covenant waiver processing fee.

Unamortized debt issue costs under the loans with People’s at December 31, 2018 and March 31, 2018 were $39,224 and $66,139, respectively.

Capital Lease

We entered into a capital lease in January 2017 for certain office equipment. The lease term is for 60 months, bears interest at 7.9% per annum and requires monthly payments of principal and interest of approximately $1,100.

NOTE 11 - INCOME TAXES

We account for income taxes under the provisions of FASB ASC 740, Income Taxes.   The tax provision for interim periods is determined using the estimated annual effective consolidated tax rate, based on the current estimate of full-year earnings before taxes, adjusted for the impact of discrete quarterly items. The provision for income taxes was $0.2 million and $0.9 million for the nine months ended December 31, 2018 and 2017, respectively.

The Company's earnings are primarily domestic, and its effective tax rate on earnings from operations for the nine months ended December 31, 2018 was 23.9%. The lower effective tax rate for the nine months ended December 31, 2018 was primarily attributable to a reduction in our federal corporate income tax rate from 34% to 21%, enacted under the Tax Cuts and Jobs Act of 2017, or the Tax Act, and the release of a valuation allowance on a deferred tax asset.

On December 22, 2017, Staff Accounting Bulletin No. 118, or SAB 118, was issued to provide guidance on accounting for the tax effects of the Tax Act. SAB 118 provides a measurement period that should not extend beyond one year from the Tax Act enactment date for companies to complete the accounting under ASC 740, Income Taxes. We finalized our analysis within the measurement period in accordance with SAB 118 after completing a review of additional guidance issued by the Internal Revenue Service and tax accounting estimates made at March 31, 2018. During the nine months ended December 31, 2018, we did not make any changes to the provisional amounts recorded in our March 31, 2018 Annual Report on Form 10-K in connection with the 2017 Tax Act.

The valuation allowance on deferred tax assets at December 31, 2018 was approximately $1.7 million. We believe that it is more likely than not that the benefit from certain state and foreign NOL carryforwards and other deferred tax assets will not be realized. In recognition of this risk, we continue to provide a valuation allowance on these items. In the event future taxable income is below management’s estimates or is generated in tax jurisdictions different than projected, the Company could be required to increase the valuation allowance for deferred tax assets. This would result in an increase in the Company’s effective tax rate.

NOTE 12 - PROFIT SHARING PLAN

Ranor has a 401(k) profit sharing plan that covers substantially all Ranor employees who have completed 90 days of service. Ranor retains the option to match employee contributions. The Company’s contributions were $61,251 and $59,859 for the nine months ended December 31, 2018 and 2017, respectively.

NOTE 13 - STOCK BASED COMPENSATION

Our board of directors, upon the recommendation of the previously constituted compensation committee of our board of directors, approved the 2016 TechPrecision Equity Incentive Plan, or the 2016 Plan, on November 10, 2016. Our stockholders approved the 2016 Plan at the Company’s Annual Meeting of Stockholders on December 8, 2016, and it applies to awards granted after that date. The 2016 Plan provides for a share reserve of 5,000,000 shares of common stock.

On July 11, 2018, we granted stock options to our chief executive officer, or CEO, and our chief financial officer, or CFO, to collectively purchase 150,000 shares of common stock at an exercise price of $0.80 per share. The options vested immediately on the grant date. The aggregate fair value of the stock options expensed during the nine months ended December 31, 2018 was $46,658. The assumptions utilized for options granted on July 11, 2018 were 104.9% for volatility, 2.58% for the risk-free interest rate, and approximately two years for the expected life.

At December 31, 2018, there were 1,332,332 shares available for grant under the 2016 Plan. The following table summarizes information and stock option activity for the nine months ended December 31, 2018:    

The total fair value of shares vested during the period was $96,519. The following table summarizes the status of our stock options outstanding but not vested for the nine months ended December 31, 2018:   

Other information relating to stock options outstanding at December 31, 2018 is as follows:  

On December 7, 2018 we granted 25,000 shares of restricted stock under the 2016 Plan each to the board members and 12,500 of restricted stock to our CEO and CFO. The stock-based compensation expense of $122,500 for service-based restricted stock was measured at fair value on the date of grant based on the number of shares expected to vest and the quoted market price of the Company’s common stock. The shares of restricted stock fully vest and cease to be subject to forfeiture on December 7, 2019, one year following the grant date. Each grantee must be serving as an executive officer on the vesting date and must have been continuously serving in such capacity from the grant date through the vesting date for the shares of restricted stock to vest. Prior to the vesting date, the grantee is not permitted to sell, transfer, pledge, assign or otherwise encumber the shares of restricted stock and if the grantee’s service with the Company terminates prior to the vesting date, the grantee’s restricted stock will be forfeited automatically. The aggregate fair value of the restricted stock expensed during the three months ended December 31, 2018 was $10,209. At December 31, 2018 there was $112,291 of total unrecognized compensation cost related to the restricted stock awards.

NOTE 14 - CONCENTRATION OF CREDIT RISK

We maintain bank account balances, which, at times, may exceed insured limits. We have not experienced any losses with these accounts and believe that we are not exposed to any significant credit risk on cash. At December 31, 2018, there were accounts receivable balances outstanding from one customer comprising 75% of the total receivables balance. The following table sets forth information as to accounts receivable from customers who accounted for more than 10% of our accounts receivable balance as of: 

*less than 10% of total

NOTE 15 - COMMITMENTS

Employment Agreements

We have employment agreements with each of our executive officers. Such agreements provide for minimum salary levels, adjusted annually, and incentive bonuses that are payable if specified company goals are attained. The aggregate commitment at December 31, 2018 for future executive salaries during the next twelve months was approximately $0.5 million. The aggregate commitment for the remainder of our employees at December 31, 2018 was approximately $0.3 million for accrued payroll, vacation and holiday pay.

NOTE 16 - EARNINGS PER SHARE (EPS)

Basic EPS is computed by dividing reported earnings available to stockholders by the weighted average number of shares outstanding. Diluted EPS also includes the effect of stock options that would be dilutive. The following table provides a reconciliation of the numerators and denominators reflected in the basic and diluted earnings per share computations, as required under FASB ASC 260:

All potential common share equivalents that have an anti-dilutive effect (i.e. those that increase income per share or decrease loss per share) are excluded from the calculation of diluted EPS. For the three and nine months ended December 31, 2018 and 2017, there were 171,000 and 642,668, and 2,590,418 and 1,796,668, respectively, of potentially anti-dilutive stock options, none of which were included in the EPS calculations above.

Item 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

Statement Regarding Forward Looking Disclosure

The following discussion of the results of our operations and financial condition should be read in conjunction with the condensed consolidated financial statements and the related notes, which appear elsewhere in this Quarterly Report on Form 10-Q. This Quarterly Report on Form 10-Q, including this section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” may contain predictive or “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements other than statements of current or historical fact contained in this quarterly report, including statements that express our intentions, plans, objectives, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions are forward-looking statements. The words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “predict,” “project,” “will,” “should,” “would” and similar expressions are intended to identify forward-looking statements.

These statements are based on current expectations, estimates and projections made by management about our business, our industry and other conditions affecting our financial condition, results of operations or business prospects. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may differ materially from what is expressed or implied in the forward-looking statements due to numerous risks and uncertainties. Factors that could cause such outcomes and results to differ include, but are not limited to:

Any forward-looking statements speak only as of the date on which they are made, and we undertake no obligation to publicly update or revise any forward-looking statements to reflect events or circumstances that may arise after the date of this Quarterly Report on Form 10-Q, except as required by applicable law. Investors should evaluate any statements made by us in light of these important factors.

Overview

We offer a full range of services required to transform raw materials into precision finished products. Our manufacturing capabilities include: fabrication operations (cutting, press and roll forming, assembly, welding, heat treating, blasting and painting) and machining operations including CNC (computer numerical controlled) horizontal and vertical milling centers. We also provide support services to our manufacturing capabilities: manufacturing engineering (planning, fixture and tooling development, manufacturing), quality control (inspection and testing), materials procurement, production control (scheduling, project management and expediting) and final assembly.

All U.S. manufacturing is done in accordance with our written quality assurance program, which meets specific national and international codes, standards and specifications. Ranor holds several certificates of authorization issued by the American Society of Mechanical Engineers and the National Board of Boiler and Pressure Vessel Inspectors. The standards used are specific to the customers’ needs, and our manufacturing operations are conducted in accordance with these standards.

Because our revenues are derived from the sale of goods manufactured pursuant to a contract, and we do not sell from inventory, it is necessary for us to constantly seek new contracts. There may be a time lag between the completion of one contract and commencement of work on another contract. During such periods, we may continue to incur overhead expense but with lower revenue resulting in lower operating margins. Furthermore, changes in either the scope of an existing contract or related delivery schedules may impact the revenue we receive under the contract and the allocation of manpower. Although we provide manufacturing services for large governmental programs, we usually do not work directly for the government or its agencies. Rather, we perform our services for large governmental contractors. Our business is dependent in part on the continuation of governmental programs which require our services and products.

Our contracts are generated both through negotiation with the customer and from bids made pursuant to a request for proposal. Our ability to receive contract awards is dependent upon the contracting party’s perception of such factors as our ability to perform on time, our history of performance, including quality, our financial condition and our ability to price our services competitively.  Although some of our contracts contemplate the manufacture of one or a limited number of units, we are seeking more long-term projects with predictable cost structures.

We historically have experienced, and continue to experience, customer concentration. For the nine months ended December 31, 2018 and 2017, our largest customer accounted for approximately 36% and 38% of reported net sales, respectively. Our sales order backlog at December 31, 2018 was approximately $14.1 million compared with a backlog of $14.0 million at March 31, 2018.

For the nine months ended December 31, 2018, our net sales and income before income taxes were $12.0 million and $0.7 million, respectively, compared with net sales and income before income taxes of $14.1 million and $1.0 million, respectively, for the nine months ended December 31, 2017.  Our gross margin for the nine months ended December 31, 2018 was 26.0% compared with gross margin of 25.6% in the nine months ended December 31, 2017.

Critical Accounting Policies

The preparation of the unaudited condensed consolidated financial statements requires that we make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base our estimates on historical experience and various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. We continually evaluate our estimates, including those related to revenue recognition, inventories, recovery of long-lived assets, income taxes and the valuation of equity transactions. These estimates and assumptions require management's most difficult, subjective or complex judgments. Actual results may differ under different assumptions or conditions.

Our significant accounting policies are set forth in detail in Note 2 to the consolidated financial statements included in the 2018 Form 10-K, and in Note 2 to the condensed consolidated financial statements included in this Quarterly Report on Form 10-Q. We consider the policies relating to revenue recognition to be a critical accounting policy. There have been no significant changes to our critical accounting policies during the nine months ended December 31, 2018, except for revenue recognition as noted below.

Accounting Standards Codification Topic 606, or ASC 606, sets forth five steps for revenue recognition: identification of the contract, identification of any separate performance obligations in the contracts, determination of the transaction price, allocation of the transaction price to separate performance obligations, and revenue recognition when performance obligations are satisfied.

We recognize revenue over time based on the transfer of control of the promised goods or services to the customer, or at a point in time. This transfer will occur over time when the Company’s performance does not create an asset that has an alternative use to the Company and we have an enforceable right to payment for performance completed to date. Otherwise, control to the promised goods or services transfers to customers at a point in time.

The majority of the Company’s contracts have a single performance obligation and provide title to, or grant a security interest in, work-in-process to the customer. In addition, these contracts contain enforceable rights to payment, allowing the Company to recover both its cost and a reasonable margin on performance completed to date. The combination of these factors indicates that the customer controls the asset (and revenue is recognized) as the asset is created or enhanced. The Company measures progress for performance obligations satisfied 1) over time using input methods (e.g., costs incurred, resources consumed, labor hours expended, time elapsed), or 2) at a point in time when units produced are delivered.

Under arrangements where the customer does not have title to, or a security interest in, the work-in-process, our evaluation of whether revenue should be recognized over time requires significant judgment about whether the asset has an alternative use and whether the entity has an enforceable right to payment for performance completed to date. When one or both of these factors is not present, the Company will recognize revenue at the point in time where control over the promised good or service transfers to the customer, i.e. when the customer has taken physical possession of the product the Company built for the customer.

The Company and its customers occasionally enter into contract modifications, including change orders. We may account for the modification as a separate contract, the termination of an old contract and creation of a new contract, or as part of the original contract, depending on the nature and pricing of the goods or services included in the modification. In general, contract modifications - as well as other changes in estimates of sales, costs, and profits on a performance obligation - are recognized using the cumulative catch-up method of accounting. This method recognizes in the current period the cumulative effect of the changes in current and prior periods. A significant change in an estimate on one or more contracts in a period could have a material effect on the consolidated balance sheet or results of operations for that period. For the nine months ended December 31, 2018, net cumulative catch-up adjustments were not material. No individual adjustment was material to the Company's condensed consolidated statements of operations and comprehensive income for the three and nine months ended December 31, 2018.

If incentives and other contingencies are provided as part of the contract, the Company will include in the initial transaction price the consideration to which it expects to be entitled under the terms and conditions of the contract, generally estimated using an expected value or most likely amount approach. In the context of variable consideration, the Company limits, or constrains, the transaction price to amounts for which the Company believes a significant reversal of revenue is not probable. Adjustments to constrain the transaction price may be due to a portion of the transaction price in being in excess of approved funding, a lack of history with the customer, a lack of history with the goods or services being provided, or other items.

New Accounting Pronouncements

See Note 3 - New Accounting Standards to the condensed consolidated financial statements included in this Quarterly Report on Form 10-Q for a discussion of recently adopted new accounting guidance and new accounting guidance not yet adopted.

Results of Operations

Our results of operations are affected by a number of external factors including the availability of raw materials, commodity prices (particularly steel), macroeconomic factors, including the availability of capital that may be needed by our customers, and political, regulatory and legal conditions in the United States and in foreign markets. Generally, our product mix is made up of short-term contracts with a production timeline of less than twelve months. Units manufactured under the majority of our customer contracts are delivered on time and with a positive gross margin.  Our results of operations are also affected by our success in booking new contracts, the timing of revenue recognition, delays in customer acceptances of our products, delays in deliveries of ordered products and our rate of progress fulfilling obligations under our contracts. A delay in deliveries or cancellations of orders could have an unfavorable impact on liquidity, cause us to have inventories in excess of our short-term needs, and delay our ability to recognize, or prevent us from recognizing, revenue on contracts in our order backlog.

Key Performance Indicators

While we prepare our financial statements in accordance with U.S. GAAP, we also utilize and present certain financial measures that are not based on or included in U.S. GAAP. We refer to these as Non-GAAP financial measures.  Please see the section “EBITDA Non-GAAP financial measures” below for further discussion of these financial measures, including the reasons why we use such financial measures and reconciliations of such financial measures to the most directly comparable U.S. GAAP financial measures. We define EBITDA as net income plus interest, income taxes, depreciation and amortization.

Three Months Ended December 31, 2018 and 2017

The following table sets forth information from the Condensed Consolidated Statements of Operations and Comprehensive Income (Loss), in dollars and as a percentage of revenue: 

nm- not meaningful

Net Sales

Changes in net sales generally reflect a different product mix and project volume when comparing different periods. For the three months ended December 31, 2018, net sales increased by $0.6 million, or 17%, to $4.3 million, when compared to net sales for the three months ended December 31, 2017, primarily as a result of higher volumes of defense customer contracts. The three months ended December 31, 2018 included $2.4 million of revenue related to the adoption of ASC 606.

For the three months ended December 31, 2018, net sales from our defense markets increased by $0.7 million when compared to the three months ended December 31, 2017. Net sales in our energy market decreased by $0.1 million when compared to the three months ended December 31, 2017, primarily on lower demand for nuclear plant components.

Cost of Sales and Gross Margin

Cost of sales consists primarily of raw materials, parts, labor, overhead and subcontracting costs. Our cost of sales for the three months ended December 31, 2018 was $3.3 million, which includes $1.8 million associated with the adoption of ASC 606, compared to $3.2 million for the three months ended December 31, 2017. Gross margin reported for the three months ended December 31, 2018 and 2017 was 22.7% and 11.6%, respectively. Gross profit was $1.0 million for the three months ended December 31, 2018 a $0.6 million increase when compared to $0.4 million in the three months ended December 31, 2017. Our prior year third quarter results were impacted by higher unabsorbed overhead because of a lower number of operating days on the factory floor due to customer and employee holiday schedules.

Selling, General and Administrative Expenses

Total selling, general, and administrative expenses, or SG&A, for the three months ended December 31, 2018 increased by approximately $36,000, or 6.0%, when compared with the three months ended December 31, 2017. The increase was primarily due to an increase in compensation expense, offset in part by a decrease in stock-based compensation. Our prior year compensation expense was impacted by the reversal of a year-to-date bonus accrual on December 31, 2017.

Other Expense, net

We reduced our overall interest rates on debt when we refinanced our debt in fiscal 2017. As a result, interest expense was lower during the three months ended December 31, 2018 when compared to the same period in the prior year and will continue to decrease as we amortize debt principal. The following table reflects other income, interest expense and amortization of debt issue costs for the three months ended December 31: 

 nm- not meaningful

Income Taxes

For the three months ended December 31, 2018 we recorded tax expense of $34,701 compared to tax expense of $413,096 for the three months ended December 31, 2017. The lower tax expense for the three months ended December 31, 2018 was primarily the result of a reduction in the federal statutory tax rate and the release of a valuation allowance on a deferred tax asset. With the enactment of the Tax Cuts and Jobs Act, or the 2017 Tax Act, the three months ended December 31, 2017 financial results included a $0.5 million discrete tax item related to the re-measurement of our U.S. deferred tax assets at the new lower 21% U.S. federal statutory tax rate.

Net Income

As a result of the foregoing, for the three months ended December 31, 2018, our net income was $218,022 compared with a net loss of $691,391 for the three months ended December 31, 2017.

Nine Months Ended December 31, 2018 and 2017

The following table sets forth information from the Condensed Consolidated Statements of Operations and Comprehensive Income (Loss), in dollars and as a percentage of revenue:  

nm- not meaningful

Net Sales

Changes in net sales generally reflect a different product mix and project volume when comparing current and prior year periods. Net sales were $12.0 million for the nine months ended December 31, 2018, which includes revenue of $6.3 million associated with the adoption of ASC 606. Net sales for the nine months ended December 31, 2018 were $2.1 million or 15% lower when compared to the nine months ended December 31, 2017. The slower order flow in the prior fiscal year and a shift in production to products with increased cycle times resulted in lower revenue and shipments during the nine months ended December 31, 2018.

For the nine months ended December 31, 2018, net sales in our defense market decreased by $1.0 million when compared to the nine months ended December 31, 2017. Net sales to energy markets decreased by $1.0 million when compared to the nine months ended December 31, 2017, primarily on lower demand for nuclear plant components. Net sales in our industrial markets decreased by $0.1 million.

Cost of Sales and Gross Margin

Cost of sales consists primarily of raw materials, parts, labor, overhead and subcontracting costs. Our cost of sales for the nine months ended December 31, 2018 was $8.9 million, which includes $4.0 million associated with the impact of ASC 606, compared to $10.5 million for the nine months ended December 31, 2017. The decrease of $1.6 million when compared to the same period in the prior year is due primarily to lower revenue volume as the Company started up new project activity and moved closer to targeted levels of production.  As a result, gross profit was $3.1 million for the nine months ended December 31, 2018 or $0.5 million lower when compared to $3.6 million for the nine months ended December 31, 2017. Gross margin was 26.0% for the nine months ended December 31, 2018 and 25.6% for the nine months ended December 31, 2017.

Selling, General and Administrative Expenses

Total SG&A expenses for the nine months ended December 31, 2018 decreased by approximately $0.1 million due primarily to a decrease in share-based compensation expense and outside advisory fees when compared to the nine months ended December 31, 2017.

Other Expense, net

We reduced our overall interest rates on debt when we refinanced our debt in fiscal 2017. As a result, interest expense was lower for the nine months ended December 31, 2018 compared to the same period in the prior year and will continue to decrease as we amortize debt principal. The following table reflects other income, interest expense and amortization of debt issue costs for the nine months ended December 31: 

 nm- not meaningful

Income Taxes

For the nine months ended December 31, 2018 we recorded tax expense of $177,104, compared to tax expense of $946,247 for the nine months ended December 31, 2017. The lower tax expense for the nine months ended December 31, 2018 was primarily the result of the lower earnings before income taxes and a lower federal statutory tax rate of 21% enacted under the 2017 Tax Act. The December 31, 2017 financial results included a $0.5 million discrete tax item related to the re-measurement of U.S. deferred tax assets at the new lower 21% U.S. federal statutory tax rate. 

Net Income

As a result of the foregoing, for the nine months ended December 31, 2018, our net income was $0.6 million, or $0.02 per share basic and fully diluted, compared with net income of $0.1 million, or $0.00 per share basic and fully diluted, for the nine months ended December 31, 2017. The December 31, 2017 net income was reduced by the $0.5 million discrete tax item related to the re-measurement of U.S. deferred tax assets. 

Liquidity and Capital Resources

At December 31, 2018, we had working capital of $5.4 million as compared with working capital of $4.9 million at March 31, 2018. At December 31, 2018, we had cash and cash equivalents of $1.8 million. Cash provided by operating activities was $120,876 for the nine months ended December 31, 2018 as collections from accounts receivable, advance payments and progress payments more than offset by the Company’s cash outlay for new and on-going projects. Net cash provided by operating activities for the nine months ended December 31, 2017 was $1.3 million, a period of favorable timing for product shipments. We believe our available cash plus cash provided by operations will be sufficient to fund operating activities, capital expenditures, and principal and interest payments under our debt obligations through the 12 months from the issuance date of the financial statements. We also have available a $1.0 million revolving line of credit under our Loan Agreement with Berkshire Bank.

The table below presents selected liquidity and capital measures as of:

The following table summarizes our primary cash flow components for the periods presented:

Operating activities

Our primary sources of cash are from accounts receivable collections, customer advance payments and project progress payments. Our customers make advance payments and progress payments under the terms of each manufacturing contract. Our cash flows can fluctuate significantly from period to period as the composition of our receivables collections mix changes between advance payments and customer payments made after shipment of finished goods. Cash provided by operations for the nine months ended December 31, 2018 was $120,876 compared with cash provided by operations of $1.3 million for the nine months ended December 31, 2017. The nine months ended December 31, 2018 was a period marked by a greater number of project startups, compared to the prior year period which had a greater number of projects completed and favorable timing with deliveries to customers. The timing resulted in a higher cash outlay used in operations in the current year period, compared with lower cash outlay for project spending as more projects were completed in the prior year period.

Investing activities

Net cash used to purchase and build new equipment totaled $0.4 million for the nine months ended December 31, 2018. For the nine months ended December 31, 2017, net cash used for new factory machinery and equipment totaled $0.9 million, offset in part by $80,000 in proceeds from the sale of certain machinery and equipment. The Company does not expect to make any significant additional purchases of machinery and equipment during the fourth quarter of fiscal 2019.

Financing activities

For the nine months ended December 31, 2018 and 2017, net cash used in financing activities were $0.6 million and $0.5 million, respectively. Each period consisted of monthly principal payments in connection with our debt obligations.

All of the above activity resulted in a net decrease in cash of $0.9 million for the nine months ended December 31, 2018 compared with a decrease in cash of $0.1 million for the nine months ended December 31, 2017.

Off-Balance Sheet Arrangements

We do not currently have, and have not had at December 31, 2018, any off-balance sheet assets, liabilities or arrangements.

EBITDA Non-GAAP Financial Measure

To complement our condensed consolidated statements of operations and comprehensive income and condensed consolidated statements of cash flows, we use EBITDA, a non-GAAP financial measure. Net income is the financial measure calculated and presented in accordance with U.S. GAAP that is most directly comparable to EBITDA. We believe EBITDA provides our board of directors, management and investors with a helpful measure for comparing our operating performance with the performance of other companies that have different financing and capital structures or tax rates. We also believe that EBITDA is a measure frequently used by securities analysts, investors and other interested parties in the evaluation of companies in our industry, and is a measure contained in our debt covenants. However, while we consider EBITDA to be an important measure of operating performance, EBITDA and other non-GAAP financial measures have limitations, and investors should not consider them in isolation or as a substitute for analysis of our results as reported under U.S. GAAP.

Net income was $0.2 million for the three months ended December 31, 2018 compared with a loss of $0.7 million for the three months ended December 31, 2017. EBITDA, a non-GAAP financial measure, was $0.5 million higher for the three months ended December 31, 2018 when compared with the three months ended December 31, 2017.

Net income was $0.6 million for the nine months ended December 31, 2018 compared with $0.1 million for the nine months ended December 31, 2017. EBITDA, a non-GAAP financial measure, for the nine months ended December 31, 2018, was $0.3 million lower when compared with the nine months ended December 31, 2017.

The following tables provides a reconciliation of EBITDA to net income, the most directly comparable U.S. GAAP measure reported in the condensed consolidated financial statements:

(a) includes amortization of debt issue costs

Item 3. Quantitative and Qualitative Disclosure About Market Risk.

As a smaller reporting company, we have elected not to provide the information required by this Item.

Item 4. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures.

Disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) are controls and procedures that are designed to ensure that the information required to be disclosed in our reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and includes controls and procedures designed to ensure that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

As of the end of the period covered by this report, an evaluation was carried out, under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2018, our disclosure controls and procedures were effective at a reasonable assurance level.

Changes in Internal Control over Financial Reporting

Our evaluation did not identify any change in the Company’s internal control over financial reporting during the quarter ended December 31, 2018 that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting. We implemented internal controls to ensure we adequately evaluated our contracts and properly assessed the impact of the new accounting standards related to revenue recognition on our financial statements in preparation for the adoption of such new standard on April 1, 2018. There were no significant changes to the Company’s internal control over financial reporting due to the adoption of the new standard.

Inherent Limitations Over Internal Controls

The Company’s internal control over financial reporting is designed under the supervision of our Chief Executive Officer and Chief Financial Officer, and effected by our board of directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. GAAP. The Company’s internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the Company’s assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. GAAP, and that the Company’s receipts and expenditures are being made only in accordance with authorizations of the Company’s management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.

Management, including the Chief Executive Officer and Chief Financial Officer, does not expect that the Company’s internal controls will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of internal controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Also, any evaluation of the effectiveness of controls in future periods is subject to the risk that those internal controls may become inadequate because of changes in business conditions, or that the degree of compliance with the policies or procedures may deteriorate.

PART II. OTHER INFORMATION.

Item 1. Legal Proceedings.

Class Action Lawsuit

On or about February 26, 2016, nine former employees, or plantiffs, of Ranor filed a complaint in the Massachusetts Superior Court, Worcester County, against Ranor and certain former and current executive officers of Ranor, alleging violations of the Massachusetts Wage Act, breach of contract and conversion based on a modification made to Ranor’s personal time off policy. Plaintiffs claim that Ranor’s modification to its personal time off, or PTO, policy in April 2014 caused these employees to forfeit earned PTO. Plaintiffs purport to assert their claims on behalf of a class of all current and former employees of Ranor who were affected by the modification to Ranor’s PTO policy.

On August 30, 2018, a class certification hearing was conducted where the Plantiffs’ motion for class certification was granted without opposition.

On October 23, 2018, the pre-trial discovery phase ended, but the parties have requested a 6-month extension. The court has extended discovery to April 22, 2019, with motions for summary judgment due one month thereafter.

Item 6. Exhibits.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.