BIO KEY INTERNATIONAL INC - Quarter Report: 2017 March (Form 10-Q)

U.S. SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

For the quarterly period ended March 31, 2017

For the Transition Period from              to

Commission file number 1-13463

BIO-KEY INTERNATIONAL, INC.

(Exact Name of registrant as specified in its charter)

3349 HIGHWAY 138, BUILDING A, SUITE E, WALL, NJ  07719

(Address of Principal Executive Offices)

(732) 359-1100

(Registrant’s telephone number, including area code)

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined by rule 12b-2 of the Exchange Act)  Yes  ☐   No  ☒

Number of shares of Common Stock, $.0001 par value per share, outstanding as of May 12, 2017 was 6,451,623.

BIO-KEY INTERNATIONAL, INC.

INDEX 

PART I — FINANCIAL INFORMATION

 ITEM 1. FINANCIAL STATEMENTS.

BIO-KEY International, Inc. and Subsidiary
CONDENSED CONSOLIDATED BALANCE SHEETS

All BIO-key shares issued and outstanding for all periods reflect BIO-key’s 1-for-12 reverse stock split, which was effective December 29, 2016.

The accompanying notes to the condensed consolidated financial statements are an integral part of these statements. 

BIO-KEY International, Inc. and Subsidiary
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(Unaudited)

All BIO-key shares issued and outstanding for all periods reflect BIO-key’s 1-for-12 reverse stock split, which was effective December 29, 2016.

The accompanying notes to the condensed consolidated financial statements are an integral part of these statements.

BIO-KEY International, Inc. and Subsidiary
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)

The accompanying notes to the condensed consolidated financial statements are an integral part of these statements.

BIO-KEY International, Inc. and Subsidiary
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)

SUPPLEMENTARY DISCLOSURES OF CASH FLOW INFORMATION

The accompanying notes to the condensed consolidated financial statements are an integral part of these statements.

BIO-KEY International Inc., and Subsidiary 

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS 

March 31, 2017 (Unaudited)

Nature of Business

BIO-key International, Inc. was founded in 1993 as a fingerprint biometric technology company. Biometric technology is the science of analyzing specific human characteristics which are unique to each individual in order to identify a specific person from a broader population. We develop and market advanced fingerprint biometric identification and identity verification technologies, cryptographic authentication-transaction security technologies, as well as related identity management and credentialing software solutions. We sell our products and provide services primarily to commercial entities within highly regulated industries, like healthcare and financial services and the broader corporate enterprise.

Basis of Presentation

The accompanying unaudited interim condensed consolidated financial statements include the accounts of BIO-key International, Inc. and its wholly-owned subsidiary (collectively, the “Company” or “BIO-key”) and are stated in conformity with accounting principles generally accepted in the United States of America, pursuant to the rules and regulations of the Securities and Exchange Commission (the “SEC”). The operating results for interim periods are not necessarily indicative of results that may be expected for any other interim period or for the full year. Pursuant to such rules and regulations, certain financial information and footnote disclosures normally included in the financial statements have been condensed or omitted. Significant intercompany accounts and transactions have been eliminated in consolidation.

In the opinion of management, the accompanying unaudited interim consolidated financial statements contain all necessary adjustments, consisting only of those of a recurring nature, and disclosures to present fairly the Company’s financial position and the results of its operations and cash flows for the periods presented. The balance sheet at March 31, 2017 was derived from the audited financial statements, but does not include all of the disclosures required by accounting principles generally accepted in the United States of America. These unaudited interim condensed consolidated financial statements should be read in conjunction with the financial statements and the related notes thereto included in the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2016, initially filed with the SEC on March 31, 2017. 

 Recently Issued Accounting Pronouncements

In May 2014, ASU No. 2014-09, “Revenue from Contracts with Customers” was issued. The comprehensive new standard will supersede existing revenue recognition guidance and require revenue to be recognized when promised goods or services are transferred to customers in amounts that reflect the consideration to which the Company expects to be entitled in exchange for those goods or services. The guidance will also require that certain contract costs incurred to obtain or fulfill a contract, such as sales commissions, be capitalized as an asset and amortized as revenue is recognized. Adoption of the new rules could affect the timing of both revenue recognition and the incurrence of contract costs for certain transactions. The guidance permits two implementation approaches, one requiring retrospective application of the new standard with restatement of prior years and one requiring prospective application of the new standard with disclosure of results under old standards. The new standard was scheduled to be effective for reporting periods beginning after December 15, 2017 and early adoption is not permitted. In August 2015, the FASB issued ASU 2015-14, "Revenue from Contracts with Customers (Topic 606): Deferral of Effective Date" ("ASU 2015-14") which defers the effective date of ASU 2014-09 by one year. ASU 2014-09 is now effective for annual reporting periods beginning after December 15, 2017 including interim periods within that reporting period.

The Company is continuing to evaluate the standard’s impact on its consolidated results of operations and financial condition. BIO-key has conducted initial analyses, developed a project management plan relative to the process of adopting this ASU, and is currently completing detailed contract reviews to determine potential adjustments to existing accounting policies as well as to support an evaluation of the standard’s impact on the Company’s consolidated results of operations and financial condition. For the majority of BIO-key’s revenue arrangements, no significant impacts are expected. However, in addition to expanded disclosures regarding revenue, the ASU could, for example, impact the timing of revenue recognition in some arrangements for which software industry-specific guidance (which the ASU supersedes) is presently utilized. The Company currently anticipates utilizing the modified retrospective method of adoption on January 1, 2018.

In July 2015 the FASB issued ASU No. 2015-11, "Inventory (Topic 330): Simplifying the Measurement of Inventory" ("ASU 2015-11"). The amendments in ASU 2015-11 clarifies the measurement of inventory to be the lower of cost or realizable value and would only apply to inventory valued using the FIFO or average costing methods. ASU 2015-11 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. The reporting entity should apply the amendments prospectively with earlier application permitted as of the beginning of an interim or annual reporting period. The adoption of ASU 2015-11 did not materially impact the Company’s consolidated financial statements.

In January 2016, the FASB issued ASU 2016-01, “Financial Instruments – Overall: Recognition and Measurement of Financial Assets and Financial Liabilities” (“ASU 2016-01”). The update addresses certain aspects of recognition, measurement, presentation and disclosure of financial instruments, specifically equity investments and financial instruments measured at amortized cost. ASU 2016-01 is effective for public companies for annual and interim periods beginning after December 15, 2017.  Management is currently assessing the impact ASU 2016-01 will have, if any, on the Company’s consolidated financial statements.

In February 2016, the FASB issued ASU 2016-02, “Leases”. The new standard establishes a right-of-use (ROU) model that requires a lessee to record a ROU asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the income statement. The new standard is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. A modified retrospective transition approach is required for capital and operating leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements, with certain practical expedients available. The Company is currently evaluating the impact of its pending adoption of the new standard on its consolidated financial statements, but expects that it will increase its assets and liabilities.

In August 2014, the FASB issued ASU No. 2014-15, “Disclosure of Uncertainties about an Entity's Ability to Continue as a Going Concern”. Prior to ASU 2014-15, a definition for substantial doubt did not exist. However, the new guidance says that substantial doubt exists when relevant conditions and events, considered in the aggregate, indicate that it is probable that the entity will be unable to meet its obligations as they become due within one year after the date that the financial statements are available to be issued. The FASB's definition could be perceived as a higher threshold than current practice as the term “probable” means likely to occur. Under the new standard, management should evaluate all relevant known conditions, or those that can be reasonably expected to happen as of the date the financial statements are to be issued. This evaluation should be both qualitative and quantitative in nature, and should include conditions that might give rise to substantial doubt. ASU 2014-15 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. The Company adopted ASU 2014-15 in the quarter March 31, 2017.

In March 2016, the FASB issued Accounting Standards Update 2016-09, “Compensation – Stock Compensation: Improvements to Employee Share-Based Payment Accounting” (“ASU 2016-09”).  ASU 2016-09 requires, among other things, that excess tax benefits and tax deficiencies be recognized as income tax expense or benefit in the income statement rather than as additional paid-in capital, changes the classification of excess tax benefits from a financing activity to an operating activity in the statement of cash flows, and allows forfeitures to be accounted for when they occur rather than estimated.  ASU 2016-09 is effective for public companies for interim and annual periods beginning after December 15, 2016.  The adoption did not have a material impact on the Company's consolidated financial statements.

Management does not believe that any other recently issued, but not yet effective, accounting standard if currently adopted would have a material effect on the accompanying consolidated financial statements.

Reclassification

Reclassifications occurred to certain prior year amounts in order to conform to the current year classifications. The reclassifications have no effect on the reported net loss.

Accounts receivable are carried at original amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful receivables by regularly evaluating individual customer receivables and considering a customer’s financial condition, credit history, and current economic conditions. Accounts receivable are written off when deemed uncollectible. During the year ended December 31, 2016, the Company reclassified a past due receivable to non-current as management concluded that collection may not occur in the near term. As a result of the payment delays the Company had reserved $500,000 at December 31, 2016 and in the current quarter the Company reserved an additional $500,000. The total reserve represents 48% of the remaining balance owed at March 31, 2017. Recoveries of accounts receivable previously written off are recorded when received. Accounts receivable at March 31, 2017 and December 31, 2016 consisted of the following:

The following table presents share-based compensation expenses for continuing operations included in the Company’s unaudited condensed consolidated statements of operations:

Due from factor consisted of the following as of: 

As of December 2011, the Company entered into a 24 month accounts receivable factoring arrangement with a financial institution (the “Factor”) which has been extended to October 31, 2017. Pursuant to the terms of the arrangement, the Company, from time to time, sells to the Factor certain of its accounts receivable balances on a non-recourse basis for credit approved accounts. The Factor remits 35% of the foreign and 75% of the domestic accounts receivable balance to the Company (the “Advance Amount”), with the remaining balance, less fees, to be forwarded to the Company once the Factor collects the full accounts receivable balance from the customer. In addition, the Company, from time to time, receives over advances from the Factor. Factoring fees range from 2.75% to 21% of the face value of the invoice factored, and are determined by the number of days required for collection of the invoice. The cost of factoring is included in selling, general and administrative expenses. The cost of factoring was as follows: 

Inventory is stated at the lower of cost, determined on a first in, first out basis, or market, and consists primarily of fabricated assemblies and finished goods. Inventory is comprised of the following as of:

On November 11, 2015, the Company entered into a license agreement for the rights to all software and documentation regarding the technology currently known as or offered under the FingerQ name. The license agreement grants the Company the exclusive right to reproduce, create derivative works and distribute copies of the FingerQ software and documentation, create new FingerQ related products, and grant sub-licenses of the licensed technology to end users. The license rights have been granted to the Company in perpetuity, with a stated number of end-user resale sub-licenses allowed under the contract for a total of $12,000,000. The cost of sub-license rights expected to be sold to customers in the following 12 months is $1,830,000 and is classified as a current asset, and the balance as non-current. 

The Company has determined the software license rights to be a finite lived intangible asset, and estimated that the software license rights shall be economically used over a 10 year period, with a weighting towards the beginning years of that time-frame. The license rights were acquired during the fourth quarter of 2015, but the usage of such rights in the Company’s products was not generally available until January 2017. Accordingly, amortization began in the first quarter of 2017.

The remaining license rights are to be amortized over the greater of the following: 1) an estimate of the economic use of such license rights, 2) straight line method over ten years, or 3) the actual usage of such rights. The Company believes categorizing the amortization expense under Cost of Sales more closely reflects the nature of the license right arrangement and the use of the technology. During the period ended March 31, 2017 the Company sold licenses costing $46,932 and amortized $341,160.

On December 31, 2015, the Company purchased third party software licenses in the amount of $180,000 in anticipation of a large pending deployment that has yet to materialize. The Company is amortizing over the same methodology described above with the greatest of the three approaches being the amortization for the periods. A total of $6,696 was expensed for actual sales during the three months ended March 31, 2017. Since the license purchase, the actual per unit cost (actual usage) of such license rights in the cumulative amount of $26,376 has been expensed. The Company has classified the balance as non-current until a larger deployment occurs.

The Company’s basic EPS is calculated using net income (loss) available to common shareholders and the weighted-average number of shares outstanding during the reporting period. Diluted EPS includes the effect from potential issuance of common stock, such as stock issuable pursuant to the exercise of stock options and warrants and the assumed conversion of convertible preferred stock.

The reconciliation of the numerator of the basic and diluted EPS calculations was as follows for the three month periods ended March 31, 2017 and 2016:

The following table summarizes the weighted average securities that were excluded from the diluted per share calculation because the effect of including these potential shares was antidilutive due to the net losses for the three months ended March 31, 2017 and 2016:

The following table sets forth options and warrants which were excluded from the diluted per share calculation because the exercise price was greater than the average market price of the common shares:

Preferred Stock

Within the limits and restrictions provided in the Company’s Certificate of Incorporation, the Board of Directors has the authority, without further action by the shareholders, to issue up to 5,000,000 shares of preferred stock, $.0001 par value per share, in one or more series, and to fix, as to any such series, any dividend rate, redemption price, preference on liquidation or dissolution, sinking fund terms, conversion rights, voting rights, and any other preference or special rights and qualifications. As of March 31, 2017, 100,000 shares of preferred stock have been designated as Series A-1 Convertible Preferred Stock, of which 90,000 shares are issued and outstanding, and 105,000 shares of preferred stock have been designated as Series B-1 Convertible Preferred Stock, all of which are issued and outstanding.  

Series A-1 Convertible Preferred Stock

On October 22 and 29, 2015, the Company issued 84,500 shares of Series A-1 Convertible Preferred Stock at a purchase price of $100.00 per share, for aggregate gross proceeds of $8,450,000. On November 11, 2015, 5,500 additional shares of Series A-1 Convertible Preferred Stock were issued at a purchase price of $100.00 per share, for gross cash proceeds of $550,000. Shares of the Series A-1 Convertible Preferred Stock are convertible at any time at the option of the holder into shares of common stock by dividing the Series A-1 Original Issue Price by an initial conversion price of $3.60 per share, subject to adjustment for stock dividends, stock splits, combinations, and reclassifications of the Company’s capital stock, and subject to a “blocker provision” which prohibits conversion if such conversion would result in the holder being the beneficial owner of in excess of 9.99% of the Company’s common stock. The Series A-1 Shares accrue dividends at the rate of 6% per annum payable quarterly on April 1, July, 1, October 1, and January 1 of each year. Unless holders of at least a majority of the outstanding shares of Series A-1 Preferred Stock elect otherwise by written notice to the Company, until October 1, 2017, the dividends are payable in cash provided that if payment in cash would be prohibited under applicable Delaware corporation law or cause the Company to breach any agreement for borrowed money, such dividends are payable in kind through the issuance of additional shares of common stock having a value equal to the volume weighted average trading price of the Company’s common stock for the ten (10) days preceding the applicable dividend payment date. Commencing January 1, 2018, dividends are payable at the option of the Company in cash or kind through the issuance of additional shares of common valued as described above.

The holders of the Series A-1 shares are entitled to designate one person to serve on the Board of Directors of the Company. The holders of the Series A-1 Shares are entitled to vote on an as converted to common stock basis together with the holders of our common stock on all matters presented to our stockholders. Upon any liquidation or dissolution of the Company, any merger or consolidation involving the Company or any subsidiary of the Company in which the shares of capital stock of the Company outstanding immediately prior to such merger or consolidation do not represent immediately following such merger or consolidation at least a majority of the voting power of the capital stock of the resulting or surviving corporation, or the sale of all or substantially all assets in a single transaction or a series of related transactions, unless the holders of at least a majority of the outstanding Series A-1 Shares elect otherwise, holders of Series A-1 Shares shall be entitled to receive prior to any payment to any holders of the Company’s common stock an amount per share equal to $100.00 per share plus any declared and unpaid dividends (pari-passu with the Series B-1 holders). As of March 31, 2017, $405,000 was accrued for the holders of the Series A-1 shares, for October 1, 2016, January 1, 2017 and April 1, 2017 dividends. As of December 31, 2016, $270,000 of dividends were accrued for the holders of the Series A-1 shares for October 1, 2016 and January 1, 2017 dividends.

The Series A-1 Preferred Stock contains options that based on an evaluation of FASB ASC 815-15, “Embedded Derivatives” and FASB ASC 815-40-15, “Contracts in Entity’s Own Equity - Scope and Scope Exceptions,” are considered embedded features:  Preferred Stock’s conversion option:  The Preferred Stock is convertible at the Holder’s option at any time at the fixed conversion price of $3.60 per share; Quarterly Dividend Conversion Option:  From issuance until December 31, 2017, the majority of Holders may elect to have the Stock’s Quarterly dividend payment made in shares of Common Stock, having a value equal to the volume weighted average trading price of the Common Stock during the ten (10) trading day period preceding the applicable dividend payment date. These features were analyzed by the Company and determined that they were not required to be bifurcated from the preferred stock and recorded as derivatives as they are clearly and closely related to an equity host.

Series B-1 Convertible Preferred Stock

On November 11, 2015, the Company issued 105,000 shares of Series B-1 Convertible Preferred Stock at a purchase price of $100.00 per share, for gross proceeds of $10,500,000.  Shares of the Series B-1 Convertible Preferred Stock are convertible at any time at the option of the holder into shares of common stock by dividing the Series B-1 Original Issue Price by an initial conversion price of $3.60 per share, subject to adjustment for stock dividends, stock splits, combinations, and reclassifications of the Company’s capital stock, and subject to a “blocker provision” which prohibits conversion if such conversion would result in the holder being the beneficial owner of in excess of 9.99% of the Company’s common stock. The Series B-1 Shares accrue dividends at the rate of 2.5% per annum payable quarterly on April 1, July, 1, October 1, and January 1 of each year payable in cash provided that if payment in cash would be prohibited under applicable Delaware corporation law or cause the Company to breach any agreement for borrowed money, or if the majority of the outstanding shares of the Series B-1 Shares elect otherwise, such dividends are payable in kind through the issuance of additional shares of common stock having a value equal to the volume weighted average trading price of the Company’s common stock for the ten (10) days preceding the applicable dividend payment date.

The holders of the Series B-1 shares are entitled to designate one person to serve on the Board of Directors of the Company. The holders of the Series B-1 Shares are entitled to vote on an as converted to common stock basis together with the holders of our common stock on all matters presented to our stockholders. Upon any liquidation or dissolution of the Company, any merger or consolidation involving the Company or any subsidiary of the Company in which the shares of capital stock of the Company outstanding immediately prior to such merger or consolidation do not represent immediately following such merger or consolidation at least a majority of the voting power of the capital stock of the resulting or surviving corporation, or the sale of all or substantially all assets in a single transaction or a series of related transactions, unless the holders of at least a majority of the outstanding Series B-1 Shares elect otherwise, holders of Series B-1 Shares shall be entitled to receive prior to any payment to any holders of the Company’s common stock an amount per share equal to $100.00 per share plus any declared and unpaid dividends (pari-passu with the Series A-1 holders). As of March 31, 2017, $196,875 was accrued for the holders of the Series B-1 shares, for October 1, 2016, January 1, 2017 and April 1, 2017 dividends. As of December 31, 2016, $131,250 of dividends were accrued for the holders of the Series B-1 shares for October 1, 2016 and January 1, 2017 dividends.

The Series B-1 Preferred Stock contains options that based on an evaluation of FASB ASC 815-15, “Embedded Derivatives” and FASB ASC 815-40-15, “Contracts in Entity’s Own Equity - Scope and Scope Exceptions,” are considered embedded features:  Preferred Stock’s conversion option:  The Preferred Stock is convertible at the Holder’s option at any time at the fixed conversion price of $3.60 per share; Quarterly Dividend Conversion Option:  The majority of Holders may elect to have the Stock’s Quarterly dividend payment made in shares of Common Stock, having a value equal to the volume weighted average trading price of the Common Stock during the ten (10) trading day period preceding the applicable dividend payment date. These features were analyzed by the Company and determined that they were not required to be bifurcated from the preferred stock and recorded as derivatives as they are clearly and closely related to an equity host.  

Common Stock 

Effective December 29, 2016, the Company implemented a reverse stock split of its outstanding common stock at a ratio of 1-for-12. The number of authorized shares and the par value of the Company's common stock and preferred stock were not affected by the reverse stock split. Stockholders who otherwise would be entitled to receive fractional shares were rounded up to the nearest whole share. The reverse stock split became effective on the OTCQB at the opening of trading on December 29, 2016.

On March 15, 2017, the Company issued 1,895 shares of common stock to its directors in payment of board fees, valued at $5,003. On March 8, 2016, the Company issued 8,333 shares of common stock to its directors in payment of board fees valued at $16,000.

Stock Issuance Costs

Costs of $5,946 and $31,704 were incurred during the three months ended March 31, 2017 and 2016 in relation to the issuance of stock.

Derivative Liabilities

In connection with the issuances of equity instruments or debt, the Company may issue options or warrants to purchase common stock. In certain circumstances, these options or warrants may be classified as liabilities, rather than as equity. In addition, the equity instrument or debt may contain embedded derivative instruments, such as conversion options or listing requirements, which in certain circumstances may be required to be bifurcated from the associated host instrument and accounted for separately as a derivative liability instrument. The Company accounts for derivative liability instruments under the provisions of FASB ASC 815, “Derivatives and Hedging.”

Securities Purchase Agreements dated October 25, 2013 and November 8, 2013

Pursuant to a series of Private Investors Securities Purchase Agreements (the “PI SPA”), on October 25, 2013 and November 8, 2013, the Company issued to certain private investors an aggregate of 1,026,972 units consisting of 1,026,972 shares of common stock (the “Shares”) and warrants to purchase an additional 1,026,972 shares of common stock (the “Warrants”) for an aggregate purchase price of $3,697,100. The warrants were immediately exercisable at an exercise price of $6.00 per share, and had a term of three years which expired in 2016.

In connection with the share issuances described above, and pursuant to a placement agency letter agreement, the Company paid the placement agent cash commissions equal to 8% of the gross proceeds of the offering, reimbursed the placement agent for its reasonable out of pocket expenses, and issued to the placement agent warrants (the “Placement Agent Warrants”) to purchase an aggregate of 82,158 shares of common stock. The Placement Agent Warrants have substantially the same terms as the warrants issued to the investors, except the Placement Agent Warrants were immediately exercisable on a cashless basis.

The cashless exercise features contained in the warrants were considered to be derivatives and the Company recorded warrant liabilities on the consolidated balance sheet. The Company initially recorded the warrant liabilities equal to their estimated fair value of $325,891. Such amount was also recorded as a reduction of additional paid-in capital. The Company is required to mark-to-market the warrant liabilities at the end of each reporting period. For the quarter ended March 31, 2016, the Company recorded a gain on the change in fair value of the cashless exercise features of $2,337. As of December 31, 2016, the fair value of the cashless exercise features was $0 as the underlying warrants expired during the fourth quarter of 2016.

Securities Purchase Agreement dated November 13, 2014

Pursuant to a Securities Purchase Agreement, dated November 13, 2014, by and between the Company and a number of private and institutional investors (the “November 2014 Private Investor SPA”), the Company issued to certain private investors 664,584 shares of common stock and warrants to purchase an additional 996,877 shares of common stock for aggregate gross proceeds of $1,595,000.

The common stock has a purchase price reset feature. If at any time prior to the two year anniversary of the effective date of the registration statement covering the public resale of such shares (January 29, 2015), the Company sells or issues shares of common stock or securities that are convertible into common stock at a price lower than $2.40 per share, the Company will be required to issue additional shares of common stock for no additional consideration.

The Company valued the purchase price reset feature using a Monte Carlo simulation at the date of issuance, and at quarterly reporting intervals until the expiration of the feature in January 2017, and determined that the purchase price reset feature had no value as the Company issued Series A-1 and Series B-1 preferred stock in October and November of 2015, at a conversion price of $3.60, and issued common stock in November 2016 also at a price of $3.60.

The warrants have a term of five years and an exercise price of $3.60 per share, and have been fully exercisable since February 2015. The warrants have customary anti-dilution protections including a “full ratchet” anti-dilution adjustment provision which are triggered in the event the Company sells or grants any additional shares of common stock, options, warrants or other securities that are convertible into common stock at a price lower than $3.60 per share, The anti-dilution adjustment provision is not triggered by certain “exempt issuances” which among other issuances, includes the issuance of shares of common stock, options or other securities to officers, employees, directors, consultants or service providers.

Based on an evaluation as discussed in FASB ASC 815-15, “Embedded Derivatives” and FASB ASC 815-40-15, “Contracts in Entity’s Own Equity - Scope and Scope Exceptions,” the Company determined that the purchase price reset feature on the common stock and the full ratchet anti-dilution feature in the warrants issued were not considered indexed to its own stock because neither the occurrence of a sale of equity securities by the issuer at market nor the issuance of another equity contract with a lower strike price is an input to the fair value of a fixed-for-fixed option or forward on equity shares. As such, the purchase price reset feature and the full ratchet anti-dilution feature should be bifurcated from the common stock and warrants and accounted for as derivative liabilities.

The Company did not value the derivative liabilities. One of the key determinants of the Company’s decision to not value the derivative liability was the high likelihood that a future financing would not occur that would trigger the down round feature or the purchase price reset feature. Whether a future equity financing would occur would be determined by the cash needs of the Company and management’s willingness to trigger the down round feature or purchase price reset feature. The Company’s reason was based on the issuance of Series A-1 and Series B-1 preferred stock in October and November of 2015, issued at a conversion price of $3.60, and the issuance of common stock in November 2016, at a price of $3.60.

Under GAAP, the Company is required to mark-to-market the derivative liability at the end of each reporting period. The Company did not value the derivative liabilities at the dates of issuance through March 31, 2017. Such conclusion was based upon the discussion noted above.

Warrants

On March 9, 2015, the Company issued a warrant to purchase 47,917 shares of common stock to a consultant which vested in equal quarterly installments over one year and is exercisable at $2.52 per share through March 8, 2020. For the three months ended March 31, 2016, the Company recorded an expense of $11,625 related to the stock warrants, which completed the service period expense.

On September 23, 2015, the Company issued a warrant to purchase 69,445 shares of common stock in connection with the issuance of a promissory note. The warrants are immediately exercisable at an exercise price of $3.60 per share and have a term of five years.

The warrants have customary anti-dilution protections including a "full ratchet" anti-dilution adjustment provision which are triggered in the event the Company sells or grants any additional shares of common stock, options, warrants or other securities that are convertible into common stock at a price lower than $3.60 per share. The anti-dilution adjustment provision is not triggered by certain "exempt issuances" which among other issuances, includes the issuance of shares of common stock, options or other securities to officers, employees, directors, consultants or service providers.

Based on an evaluation as discussed in FASB ASC 815-15, “Embedded Derivatives” and FASB ASC 815-40-15, “Contracts in Entity’s Own Equity – Scope and Scope Exceptions,” the Company determined that the full ratchet anti-dilution feature in the warrants issued was not considered indexed to its own stock because neither the occurrence of a sale of equity securities by the issuer at market nor the issuance of another equity contract with a lower strike price is an input to the fair value of a fixed-for-fixed option or forward on equity shares. As such, the full ratchet anti-dilution feature should be bifurcated from the common stock and accounted for as a derivative liability.

The Company did not value the derivative liability. One of the key determinants of the Company’s decision to not value the derivative liability was the high likelihood that a future financing would not occur that would trigger the down round feature. Whether a future equity financing would occur would be determined by the cash needs of the Company and management’s willingness to trigger the down round feature. The Company’s reasons were based on the issuance of Series A-1 and Series B-1 preferred stock in October and November of 2015, issued at a conversion price of $3.60, and the issuance of common stock in November 2016, at a price of $3.60.

The cashless exercise features contained in the warrants were initially considered to be derivatives and the Company recorded a warrant liability of $92,199 on the consolidated balance sheet in 2015. The warrants issued by the Company were valued using an option-pricing model. The Company marked-to-market the warrant liabilities at the end of each reporting period. For the quarter ended March 31, 2016 the Company recorded a loss on the change in fair value of the cashless exercise features of $2,375. During 2016, the Company determined the cashless exercise features did not meet the criteria for recording a warrant liability. Accordingly, the grant date fair value of the warrant liability was transferred to additional paid-in capital and the cumulative loss due to change in the recorded fair value of the liability was reversed during 2016.

Issuances of Stock Options

On March 15, 2017, the Company issued options to purchase 40,000 shares of the Company’s common stock to four non-employee members of the Board of Directors. On March 15, 2017, the Company also issued options to purchase 4,167 shares of the Company’s common stock to an employee. The options have a three year vesting period, seven year term, and exercise price of $2.64.  

On March 16, 2017, the Board of Directors issued options to purchase 1,120,000 shares of the Company’s common stock to certain officers, employees, and contractors. The options have a three year vesting period, seven year term, and exercise price of $2.65.

The fair value of the options issued during the three months ended March 31, 2017 was estimated on the date of grant at $2,660,122 using the Black-Scholes option-pricing model with the following assumptions: risk free interest rate: 1.93%, expected life of options in years: 4.5, expected dividends: 0, volatility of stock price: 137.8%.

During the three months ended March 31, 2016, the Company did not grant any stock options.

The Company has determined that it operates in one discrete segment consisting of biometric products. Geographically, North American sales accounted for approximately 83% and 82% of the Company’s total sales for the three-month periods ended March 31, 2017 and 2016, respectively.

Cash and cash equivalents, accounts receivable, due from/to factor, accounts payable and accrued liabilities are carried at, or approximate, fair value because of their short-term nature.

For the three months ended March 31, 2017 and 2016, three customers accounted for 70% of revenues and three customers accounted for 58% of revenues, respectively. Two customers accounted for 40% of current accounts receivable as of March 31, 2017. One customer accounted for 100% of non-current accounts receivable as of March 31, 2017 and December 31, 2016. Based on prior history with this customer, the Company believes the amount is fully collectable, however, the Company has reserved $1,00,000 which represents 48% of the remaining balance owed under the contract, due to the length of time the receivable has been outstanding.  At December 31, 2016, one customer accounted for 81% of current accounts receivable.

On April 10, 2017, the Company issued options to purchase 10,000 shares of the Company’s common stock to the newly appointed Director. The options have a three year vesting period, seven year term, and exercise price of $2.64.  

On April 28, 2017, the Company issued to Wong Kwok Fong, a director and executive officer of the Company, 277,778 shares of common stock at a purchase price of $3.60 per share for gross cash proceeds of $1,000,000.

On May 2, 2017, the Company entered into a committed equity facility pursuant to which it may issue and sell up to $5.0 million worth of shares of common stock, subject to certain limitations and satisfaction of certain conditions, over a 36-month term following the effectiveness of a registration statement covering the public resale of the shares of common stock issued under the facility. From time to time over the term of the facility, the Company may issue requests to the investor to purchase a specified dollar amount of shares up to a maximum of $100,000 over a five trading day period based on the daily volume weighted average price of the Company’s common stock (VWAP) to the extent the VWAP equals or exceeds the greater of a formula amount or $3.83 per share. The per share purchase price for the shares issued under the facility will be equal to 94% of the lowest VWAP that equals or exceeds $3.83 per share. Aggregate sales under the facility are limited to 19.99% of the total outstanding shares of the Company’s common stock as of May 2, 2017, unless stockholder approval is obtained, and sales under the facility are prohibited if such a sale would result in beneficial ownership by the investor of more than 9.99% of the Company’s common stock. The Company issued 55,000 shares of common stock as a commitment fee.

On May 11, 2017, the Company issued 1,925 shares of common stock to its directors in payment of board fees.

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITIONS AND RESULTS OF OPERATIONS.

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

All statements other than statements of historical facts contained in this Report on Form 10-Q, including statements regarding our future financial position, business strategy and plans and objectives of management for future operations, are forward-looking statements. The words “anticipate,” “believe,” “estimate,” “will,” “may,” “future,” “plan,” “intend” and “expect” and similar expressions generally identify forward-looking statements. These forward-looking statements are not guarantees and are subject to known and unknown risks, uncertainties and assumptions that may cause our actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by such forward-looking statements. Although we believe that our plans, intentions and expectations reflected in the forward-looking statements are reasonable, we cannot be sure that they will be achieved. Particular uncertainties that could cause our actual results to be materially different than those expressed in our forward-looking statements include: our history of losses and limited revenue; our ability to raise additional capital; our ability to protect our intellectual property; changes in business conditions; changes in our sales strategy and product development plans; changes in the marketplace; continued services of our executive management team; security breaches; competition between us and other companies in the biometric technology industry; market acceptance of biometric products generally and our products under development; our ability to expand into the Asian market; delays in the development of products and statements of assumption underlying any of the foregoing, as well as other factors set forth under the caption “Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2016 filed with the Securities and Exchange Commission. All subsequent written and oral forward-looking statements attributable to us, or persons acting on our behalf, are expressly qualified in their entirety by the foregoing. Except as required by law, we undertake no obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

OVERVIEW

We develop and market advanced fingerprint biometric identification and identity verification technologies, cryptographic authentication-transaction security technologies, as well as related identity management and credentialing software solutions. We were pioneers in developing automated, finger identification technology that supplements or compliments other methods of identification and verification, such as personal inspection identification, passwords, tokens, smart cards, ID cards, PKI, credit card, passports, driver’s licenses, OTP or other form of possession or knowledge-based credentialing.  Advanced BIO-key® technology has been and is used to improve both the accuracy and speed of competing finger-based biometrics. Our solutions are used by many customers in numerous sectors of our economy, including government, retail, healthcare and financial services.

In 2016, we began to distribute directly to consumers and commercial users our SideSwipe™, SideTouch^TM , and EcoID™ products. SideSwipe, SideTouch, and EcoID are stand-alone fingerprint readers that can be used on any laptop, tablet or other device with a USB port.

At Consumer Electronics Show 2017, we introduced a number of new products. These included TouchLock, fingerprint biometric and bluetooth enabled padlocks, FreePass, a wearable, mobile USB fingerprint reader, Q-180 Touch, a Micro USB compatible fingerprint reader for Android devices, and SidePass, a compact, square, touch reader for Windows devices. We expect to commence distribution in both the Asia Pacific and domestic markets in 2017.

We have developed what we believe is the most discriminating and effective commercially available finger-based biometric technology. Our primary focus is in marketing and selling this technology into commercial logical and physical privilege entitlement & access control markets.  Our primary market focus includes, among others, mobile payments & credentialing, online payments and credentialing, and healthcare record and payment data security.  Our secondary focus includes government and educational markets.

We continue to develop advancements in our capabilities, as well as explore potential strategic relationships, including business combinations and acquisitions, which could help us leverage our capability to deliver our solutions. We have built a direct sales force, and also utilize distributors, resellers, integrators and partners with substantial experience in selling technology solutions to government and corporate customers in their respective markets.

STRATEGIC OUTLOOK AND RECENT DEVELOPMENTS

Historically, our largest market has been access control within highly regulated industries such as healthcare.  However, we believe the mass adoption of advanced smart-phone and hand-held wireless devices have caused commercial demand for advanced user authentication to emerge as viable.  The introduction of smart-phone capabilities, like mobile payments and credentialing, could effectively require biometric user authentication on mobile devices to reduce risks of identity theft, payment fraud and other forms of fraud in the mobile or cellular based world wide web. As more services and payment functionalities, such as mobile wallets and near field communication (NFC), migrate to smart-phones, the value and potential risk associated with such systems should grow and drive demand and adoption of advanced user authentication technologies, including fingerprint biometrics and BIO-key solutions.

As devices with onboard fingerprint sensors continue to deploy to consumers, we expect that third party application developers will demand the ability to authenticate users of their respective applications (app’s) with the onboard fingerprint biometric. We further believe that authentication will occur on the device itself for potentially low-value, and therefore low-risk, use-transactions and that user authentication for high-value transactions will migrate to the application provider’s authentication server, typically located within their supporting technology infrastructure, or cloud. We have developed our technology to enable on-device authentication as well as network or cloud-based authentication and believe we may be the only technology vendor capable of providing this flexibility and capability. Our core technology works on over 40 commercially available fingerprint readers, across both Windows and Linux platforms, and Apple iOS and Android mobile operating systems. This interoperability, coupled with the ability to authenticate users via the device or cloud, is unique in the industry, provides a key differentiator for us, and in our opinion, makes our technology more viable than competing technologies and expands the size of the overall market for our products.

The introduction of the TouchLock, fingerprint biometric and bluetooth (cell phone) enabled padlocks, opens up an additional consumer market for us. As a security solution, we also have a version of the lock that is TSA compatible, to allow travelers to lock their luggage which TSA can open and relock.

We believe there is potential for significant market growth in six key areas:

In the near-term, we expect to grow our business within government services and highly-regulated industries in which we have historically had a strong presence, such as the healthcare industry.  We believe that continued heightened security and privacy requirements in these industries will generate increased demand for security solutions, including biometrics. In addition, we expect that the integration of our technology into Windows 10, will accelerate the demand for our computer network log-on solutions and fingerprint readers. We are also experiencing increased demand and interest in our hardware offerings as we continue to develop our products business. Finally, our entry into the Asian market and licensing arrangement with China Goldjoy Group is expected to further expand our business by opening new markets.

Over the longer term, we intend to expand our business into the cloud and mobile computing industries. The emergence of cloud computing and mobile computing are primary drivers of commercial and consumer adoption of advanced authentication applications, including biometric and BIO-key authentication capabilities.  As the value of assets, services and transactions increases on such networks, we expect that security and user authentication demand should rise proportionately. Our integration partners include major web and network technology providers, who we believe will deliver our cloud-applicable solutions to interested service-providers. These service-providers could include, but are not limited to, financial institutions, web-service providers, consumer payment service providers, credit reporting services, consumer data service providers, healthcare providers and others. Additionally, our integration partners include major technology component providers and OEM manufacturers, who we believe will deliver our device-applicable solutions to interested hardware manufacturers. Such manufacturers could include cellular handset and smartphone manufacturers, tablet manufacturers, laptop and PC manufacturers, among other hardware manufacturers. 

CRITICAL ACCOUNTING POLICIES

For detailed information regarding our critical accounting policies and estimates, see our financial statements and notes thereto included in this Report and in our Annual Report on Form 10-K for the year ended December 31, 2016.  There have been no material changes to our critical accounting policies and estimates from those disclosed in our most recent Annual Report on Form 10-K.

RECENT ACCOUNTING PRONOUNCEMENTS

For detailed information regarding recent account pronouncements, see Notes to Condensed Consolidated Financial Statements included in Part I, Item 1 of this report.

RESULTS OF OPERATIONS

THREE MONTHS ENDED MARCH 31, 2017 AS COMPARED TO MARCH 31, 2016

Consolidated Results of Operations - Percent Trend

Revenues and cost of goods sold

Revenues

For the three months ended March 31, 2017, service revenues were $320,587 as compared to $284,726 during the three months ended March 31, 2016, an increase of $35,861, or 13%. The increase was due to non-recurring custom service revenue increasing to $180,500 as compared to $94,000 during the three months ended March 31, 2016. The increase was offset by recurring maintenance and support revenue decreasing to $140,000 as compared to $190,700 during the three months ended March 31, 2016.

For the three months ended March 31, 2017, license and other revenue (comprised of third party hardware and royalty) increased to $1,097,748 from $145,866, or 653%, from the three months ended March 31, 2016. The increase was the result of higher license and hardware sales. License sales increased to $496,568 from $24,207 for the three months ended March 31, 2016. During the three months ended March 31, 2017, we continued to ship products to Omnicell (formerly Aesynt) for the continued deployment of our identification technology in its AccuDose® product line, and for continued expansion of biometric ID deployments with commercial partners NCR, Educational Biometric Technology, Union Pacific, Identimetrics and expanded several healthcare facilities. Hardware sales increased by approximately $500,000, or 495%, to $601,180 with 48% of the increase attributable to sales in Asia Pacific. Our royalty income that was derived from an OEM agreement has been completed. As a result, there was no royalty income for the three months ended March 31, 2017 compared to $20,584 for corresponding period in 2016.

Costs of goods sold

For the three months ended March 31, 2017, cost of service decreased approximately $17,000 or 30% to $38,820, as a result of less third party requirements for specific non-recurring custom services revenue. For the three months ended March 31, 2017, license and other costs increased to $622,114 from $56,066 during the three months ended March 31, 2016 of which $280,954 was directly related to the increased hardware revenue, and $341,160 was directly related to amortization of the software rights.

Selling, general and administrative

Selling, general and administrative expenses for the three months ended March 31, 2017 increased 63% to $1,620,150 as compared to $992,525 for the corresponding period in 2016.   The increase is largely due to a bad debt expense related to a contract whose payments are behind schedule.  As a result of the payment delays, we reserved $500,000 which represents 24% of the remaining balance owed under the contract. Other increases resulted from additional expenses related to our Hong Kong subsidiary and increased commission expense related to higher revenue. These amounts were offset by a decrease in factoring fees and non-cash, share-based compensation expenses.

Research, development and engineering

For the three months ended March 31, 2017, research, development and engineering expenses increased 1% to $493,444 as compared to $489,401 for the corresponding period in 2016. Increased personnel costs and costs related to additional activity in our Hong Kong subsidiary was offset by reductions in temporary contractor labor.

Other income and expense

Interest income for the quarters ended March 31, 2017 and March 31, 2016 consisted of bank interest.

During the fourth quarters of 2013 and 2014, and third quarter of 2015, we issued various warrants that contained derivative liabilities. Such derivative liabilities are required to be marked-to-market each reporting period. In 2016, we determined the warrant liability recorded during the third quarter of 2015 did not meet the criteria to record a derivative liability and, therefore, the related cumulative loss on the derivative was reversed.

LIQUIDITY AND CAPITAL RESOURCES

Cash Flows

Net cash provided by operations during the three months ended March 31, 2017 was approximately $117,000. The cash provided in operating activities was primarily attributable to the following items:

Approximately $14,000 was used for investing activities during the three months ended March 31, 2017 related to capital expenditures.

Approximately $6,000 was used for issuance of stock costs during the three months ended March 31, 2017.

We had net working capital at March 31, 2017 of approximately $2,782,000 as compared to net working capital of approximately $3,074,000 at December 31, 2016.

Liquidity and Capital Resources

Since our inception, our capital needs have been principally met through proceeds from the sale of equity and debt securities.  We expect capital expenditures to be less than $100,000 during the next twelve months.  

The following sets forth our primary sources of capital during the previous two years:

As of December 2011, we entered into a 24-month accounts receivable factoring arrangement with a financial institution (the “Factor”) which has since been extended through October 31, 2017. Pursuant to the terms of the arrangement, from time to time, we sell to the Factor certain of our accounts receivable balances on a non-recourse basis for credit approved accounts. The Factor remits 35% of the foreign and 75% of the domestic accounts receivable balance to us (the “Advance Amount”), with the remaining balance, less fees, to be forwarded to us once the Factor collects the full accounts receivable balance from the customer. In addition, from time to time, we receive over advances from the Factor. Factoring fees range from 2.75% to 21% of the face value of the invoice factored, and are determined by the number of days required for collection of the invoice. We expect to continue to use this factoring arrangement periodically to assist with our general working capital requirements due to contractual requirements.   

On September 23, 2015, we issued a promissory note and a warrant to purchase 69,445 shares of common stock for an aggregate principal sum of $250,000. The warrants have a term of five years and an exercise price of $3.60 per share. The note was repaid in full in October 2015.

On October 22 and 29, 2015, we issued 84,500 shares (the “Series A-1 Shares”) of Series A-1 Convertible Preferred Stock at a purchase price of $100.00 per share, for aggregate gross proceeds of $8,450,000. The Series A-1 Shares are convertible at any time at the option of the holder into shares of common stock at a conversion price of $3.60 per share, subject to adjustment for stock dividends, stock splits, combinations, and reclassifications of our capital stock, and subject to a “blocker provision” which prohibits conversion if such conversion would result in the holder being the beneficial owner of in excess of 9.99% of our common stock. The Series A-1 Shares accrue dividends at the rate of 6% per annum payable quarterly on April 1, July, 1, October 1, and January 1 of each year payable in cash through October 1, 2017 and thereafter, in cash or kind through the issuance of additional shares of common stock having a value equal to the volume weighted average trading price of the Company’s common stock for the ten (10) days preceding the applicable dividend payment date.

On November 11, 2015, we issued 105,000 shares (the “Series B-1 Shares”) of Series B-1 Convertible Preferred Stock at a purchase price of $100.00 per share, for gross proceeds of $10,500,000, and 5,500 additional shares of Series A-1 Convertible Preferred Stock at a purchase price of $100.00 per share, for gross cash proceeds of $550,000. The Series B-1 Shares are convertible at any time at the option of the holder into shares of common stock at a conversion price of $3.60 per share, subject to adjustment for stock dividends, stock splits, combinations, and reclassifications of our capital stock, and subject to a “blocker provision” which prohibits conversion if such conversion would result in the holder being the beneficial owner of in excess of 9.99% of our common stock. The Series B-1 Shares accrue dividends at the rate of 2.5% per annum payable quarterly on April 1, July, 1, October 1, and January 1 of each year payable in cash.

On November 18, 2016, we issued to Wong Kwok Fong (Kelvin), a director and executive officer of the Company, 516,667 shares of common stock at a purchase price of $3.60 per share for gross cash proceeds of $1,860,000.

On April 28, 2017, we issued to Wong Kwok Fong (Kelvin), a director and executive officer of the Company, 277,778 shares of common stock at a purchase price $3.60 per share for gross cash proceeds of $1,000,000.

On May 2, 2017, we entered into a committed equity facility pursuant to which we may issue and sell up to $5.0 million worth of shares of common stock, subject to certain limitations and satisfaction of certain conditions, over a 36-month term following the effectiveness of a registration statement covering the public resale of the shares of common stock issued under the facility. From time to time over the term of the facility, we may in our sole discretion, issue requests to the investor to purchase a specified dollar amount of shares up to a maximum of $100,000 over a five trading day period based on the daily volume weighted average price of our common stock (VWAP) to the extent the VWAP equals or exceeds the greater of a formula amount or $3.83 per share. The per share purchase price for the shares issued under the facility will be equal to 94% of the lowest VWAP that equals or exceeds $3.83 per share. Aggregate sales under the facility are limited to 19.99% of the total outstanding shares of the Company’s common stock as of May 2, 2017, unless we obtain stockholder approval, and we are prohibited from making requests if the sale of shares pursuant to a request would result in beneficial ownership by the investor of more than 9.99% of our common stock. 

Liquidity outlook

At March 31, 2017, our total cash and cash equivalents were approximately $1,158,000, as compared to approximately $1,061,000 at December 31, 2016.

As discussed above, we have historically financed our operations through access to the capital markets by issuing secured and convertible debt securities, convertible preferred stock, common stock, and through factoring receivables. We estimate that we currently require approximately $592,000 per month to conduct our operations and pay dividend obligations, a monthly amount that we have been unable to consistently achieve through revenue generation. During the first quarter of 2017, we generated approximately $1,418,000 of revenue, which is below our average monthly requirements.

If we are unable to continue to generate sufficient revenue to meet our goals, we will need to obtain additional third-party financing to (i) conduct the sales, marketing and technical support necessary to execute our plan to substantially grow operations, increase revenue and serve a significant customer base; and (ii) provide working capital. We may, therefore, need to obtain additional financing through the issuance of debt or equity securities. 

Due to several factors, including our history of losses and limited revenue, our independent auditors have included an explanatory paragraph in their opinion related to our annual financial statements as to the substantial doubt about our ability to continue as a going concern. Our long-term viability and growth will depend upon the successful commercialization of our technologies and our ability to obtain adequate financing. To the extent that we require such additional financing, no assurance can be given that any form of additional financing will be available on terms acceptable to us, that adequate financing will be obtained to meet our needs, or that such financing would not be dilutive to existing stockholders. If available financing is insufficient or unavailable or we fail to continue to generate sufficient revenue, we may be required to further reduce operating expenses, delay the expansion of operations, be unable to pursue merger or acquisition candidates, or in the extreme case, not continue as a going concern.

Disclosure Controls and Procedures

Our management, with the participation of our Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), evaluated the effectiveness of our disclosure controls and procedures as of March 31, 2017. The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate, to allow timely decisions regarding required disclosure. Based on the evaluation of our disclosure controls and procedures as of March 31, 2017, our CEO and CFO concluded that, as of such date, our disclosure controls and procedures were effective at the reasonable assurance level. 

Changes in Internal Control Over Financial Reporting

No change in our internal control over financial reporting occurred during the fiscal quarter ended March 31, 2017, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

PART II — OTHER INFORMATION

On March 15, 2017, we issued 1,895 shares of common stock and options to purchase 40,000 shares of common stock to certain of our non-employee directors in payment of directors’ fees. The options are exercisable at $2.64 per share, have a term of seven years, and vest-in in equal installments over a three-year period. The foregoing securities were issued in a private placement transaction pursuant to the exemption from registration provided by Section 4(a)(2) of the Securities Act of 1933, as amended, without general solicitation or advertising of any kind and without payment of placement agent or brokerage fees to any person.

The exhibits listed in the Exhibits Index immediately preceding such exhibits are filed as part of this Report.

SIGNATURES 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

EXHIBIT INDEX

26