ESCO TECHNOLOGIES INC - Annual Report: 2017 (Form 10-K)

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10-K

For the fiscal year ended September 30, 2017

OR

For the transition period from _____ to_____

Commission file number: 1-10596

ESCO Technologies Inc.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code:
(314) 213-7200

Securities registered pursuant to section 12(b) of the Act:

Securities registered pursuant to section 12(g) of the Act:
None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. x Yes   ¨ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  ¨

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. x Yes   ¨ No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). x Yes   ¨ No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form l0-K or any amendment to this Form l0-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). ¨ Yes x No

Aggregate market value of the Common Stock held by non-affiliates of the registrant as of the close of trading on March 31, 2017, the last business day of the registrant’s most recently completed second fiscal quarter: approximately $1,455,041,000.*

* Based on the New York Stock Exchange closing price. For purpose of this calculation only, without determining whether the following are affiliates of the registrant, the registrant has assumed that (i) its directors and executive officers are affiliates, and (ii) no party who has filed a Schedule 13D or 13G is an affiliate.

Number of shares of Common Stock outstanding at November 6, 2017: 25,835,902

DOCUMENTS INCORPORATED BY REFERENCE:

Part III of this Report incorporates by reference certain portions of the registrant’s definitive Proxy Statement for its 2018 Annual Meeting of Shareholders, which the registrant currently anticipates first sending to shareholders on or about December 14, 2017 (hereinafter, the “2017 Proxy Statement”).

INDEX TO ANNUAL REPORT ON FORM 10-K

FORWARD-LOOKING INFORMATION

Statements contained in this Form 10-K regarding future events and the Company’s future results that are based on current expectations, estimates, forecasts and projections about the Company’s performance and the industries in which the Company operates are considered “forward-looking statements” within the meaning of the safe harbor provisions of the Federal securities laws. These include, without limitation, statements about: the adequacy of the Company’s buildings, machinery and equipment; the adequacy of the Company’s credit facilities and future cash flows; the outcome of litigation, claims and charges; future costs relating to environmental matters; continued reinvestment of foreign earnings and the resulting U.S. tax liability in the event such earnings are repatriated; repayment of debt within the next twelve months; the outlook for 2018 and beyond, including amounts, timing and sources of 2018 sales, revenues, sales growth, EBIT, EBITDA, EBIT margins and EPS; interest on Company debt obligations; the ability of expected hedging gains or losses to be offset by losses or gains on related underlying exposures; the Company’s ability to increase shareholder value; acquisitions; income tax expense and the Company’s expected effective tax rate; minimum cash funding required by, expected benefits payable from, and Management’s assumptions about future events which could affect liability under, the Company’s defined benefit plans and other postretirement benefit plans; the recognition of unrecognized compensation costs related to share-based compensation arrangements; the Company’s exposure to market risk related to interest rates and to foreign currency exchange risk; the likelihood of future variations in the Company’s assumptions or estimates used in recording contracts and expected costs at completion under the percentage of completion method; the Company’s estimates and assumptions used in the preparation of its financial statements; cost and estimated earnings on long-term contracts; valuation of inventories; estimates of uncollectible accounts receivable; the risk of goodwill impairment; the Company’s estimates utilized in software revenue recognition, non-cash depreciation and the amortization of intangible assets; the valuation of deferred tax assets; estimates of future cash flows and fair values in connection with the risk of goodwill impairment; amounts of NOL not realizable and the timing and amount of the reduction of unrecognized tax benefits; the effects of implementing recently issued accounting pronouncements; and any other statements contained herein which are not strictly historical. Words such as expects, anticipates, targets, goals, projects, intends, plans, believes, estimates, variations of such words, and similar expressions are intended to identify such forward-looking statements.

Investors are cautioned that such statements are only predictions and speak only as of the date of this Form 10-K, and the Company undertakes no duty to update the information in this Form 10-K except as may be required by applicable laws or regulations. The Company’s actual results in the future may differ materially from those projected in the forward-looking statements due to risks and uncertainties that exist in the Company’s operations and business environment, including but not limited to those described herein under “Item 1A, Risk Factors,” and the following: Aclara’s continuing ability to perform contracts guaranteed by the Company; the impacts of labor disputes, civil disorder, wars, elections, political changes, terrorist activities or natural disasters on the Company’s operations and those of the Company’s customers and suppliers; the timing and content of future customer orders; the appropriation and allocation of government funds; the termination for convenience of government and other customer contracts; the timing and magnitude of future contract awards; weakening of economic conditions in served markets; the success of the Company’s competitors; changes in customer demands or customer insolvencies; competition; intellectual property rights; technical difficulties; the availability of selected acquisitions; delivery delays or defaults by customers; performance issues with key customers, suppliers and subcontractors; material changes in the costs of certain raw materials; material changes in the cost of credit; changes in laws and regulations including but not limited to changes in accounting standards and taxation requirements; costs relating to environmental matters; litigation uncertainty; and the Company’s successful execution of internal restructuring and other plans.

PART I

Item 1. Business

The Company

The Registrant, ESCO Technologies Inc. (ESCO), is a producer of engineered products and systems sold to customers worldwide, primarily for utility, industrial, aerospace and commercial applications. ESCO conducts its business through a number of wholly-owned direct and indirect subsidiaries. ESCO and its subsidiaries are referred to in this Report as “the Company.”

ESCO was incorporated in Missouri in August 1990 as a wholly owned subsidiary of Emerson Electric Co. (Emerson) to be the indirect holding company for several Emerson subsidiaries, which were primarily in the defense business. Ownership of the Company was spun off by Emerson to its shareholders on October 19, 1990, through a special distribution. Since that time, through a series of acquisitions and divestitures, the Company has shifted its primary focus from defense contracting to the production and supply of engineered products and systems marketed to utility, industrial, aerospace and commercial users.

The Company’s fiscal year ends September 30. Throughout this document, unless the context indicates otherwise, references to a year (for example 2017) refer to the Company’s fiscal year ending on September 30 of that year.

The Company is organized based on the products and services it offers, and classifies its business operations in segments for financial reporting purposes. As a result of the acquisitions of Plastique and Fremont discussed in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” beginning in the second quarter of 2016 Management expanded the presentation of its reporting segments to include a fourth segment, Technical Packaging. Prior period segment amounts have been reclassified to conform to the current period presentation.

The Company’s four segments, together with the significant domestic and foreign operating subsidiaries within each segment during 2017, are as follows:

Filtration/Fluid Flow (Filtration):

PTI Technologies Inc. (PTI)

VACCO Industries (VACCO)

Crissair, Inc. (Crissair)

Westland Technologies, Inc. (Westland)

Mayday Manufacturing Co. (Mayday)

Hi-Tech Metals, Inc. (Hi-Tech)

RF Shielding and Test (Test):

ETS-Lindgren Inc.

Except as the context otherwise indicates, the term “ETS-Lindgren” as used herein includes ETS-Lindgren Inc. and the Company’s other Test segment subsidiaries.

Utility Solutions Group (USG):

Doble Engineering Company

Morgan Schaffer Ltd. (Morgan Schaffer)

NRG Systems, Inc. (NRG)

Except as the context otherwise indicates, the term “Doble” as used herein includes Doble Engineering Company and the Company’s USG subsidiaries other than Morgan Schaffer and NRG.

Technical Packaging:

Thermoform Engineered Quality LLC (TEQ)

Plastique Limited

Plastique Sp. z o.o.

Plastique Limited and Plastique Sp. z o.o. are referred to together herein as “Plastique.”

The Company’s operating subsidiaries are engaged primarily in the research, development, manufacture, sale and support of the products and systems described below. Their respective businesses are subject to a number of risks and uncertainties, including without limitation those discussed in Item 1A, “Risk Factors.” See also Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and “Forward-Looking Information.”

ESCO is continually seeking ways to save costs, streamline its business processes and enhance the branding of its products and services. In October 2015 the Company announced several restructuring and realignment actions involving the Test and USG segments which were completed during 2016, including closing ETS-Lindgren’s operating subsidiaries in Germany and the United Kingdom and consolidating their operations into other existing Test facilities; eliminating certain underperforming product line offerings in Test primarily related to lower margin international shielding end markets; reducing headcount in Test’s U.S. business; and closing Doble’s Brazil operating office and consolidating Doble’s South American sales and support activities.

ESCO is also continually seeking opportunities to supplement its growth by making strategic acquisitions. During 2017, the Company acquired Mayday, a leading manufacturer of mission-critical bushings, pins, sleeves and precision-tolerance machined components for landing gear, rotor heads, engine mounts, flight controls, and actuation systems for the aerospace and defense industries; Hi-Tech, a full-service metal processor offering aerospace original equipment manufacturers (“OEMs”) and Tier 1 suppliers a large portfolio of processing services including anodizing, cadmium and zinc-nickel plating, organic coatings, non-destructive testing, and heat treatment; NRG, the global market leader in the design and manufacture of decision support tools for the renewable energy industry, primarily wind; and the assets of Morgan Schaffer Inc., which designs, develops, manufactures and markets an integrated offering of dissolved gas analysis, oil testing, and data management solutions which enhance the ability of electric utilities to accurately monitor the health of critical power transformers. In August 2017, the Company acquired the assets of Vanguard Instruments Company (Vanguard Instruments), a test equipment provider serving the global electric utility market. More information about these 2017 acquisitions as well as the Company’s acquisition activity during 2016 and 2015 is provided in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and in Note 2 to the Consolidated Financial Statements included herein.

Products

The Company’s principal products are described below. See Note 13 to the Consolidated Financial Statements included herein for financial information regarding business segments and 10% customers.

Filtration

The Filtration segment accounted for approximately 41%, 36% and 37% of the Company’s total revenue in 2017, 2016 and 2015, respectively.

PTI is a leading supplier of filtration and fluid control products serving the commercial aerospace, military aerospace and various industrial markets. Products include filter elements, manifolds, assemblies, modules, indicators and other related components. All products must meet stringent qualification requirements and withstand severe operating conditions. Product applications include: hydraulic, fuel, cooling and air filtration systems for fixed wing and rotary aircraft, mobile transportation and construction equipment, aircraft engines and stationary plant equipment. PTI supplies products worldwide to OEMs and the U.S. government under long term contracts, and to the commercial and military aftermarket through distribution channels.

VACCO supplies filtration and fluid control products including valves, manifolds, filters, regulators and various other components for use in the space, military aerospace, defense missile systems, U.S. Navy and commercial industries. Applications include aircraft fuel and de-icing systems, missiles, satellite propulsion systems, satellite launch vehicles and other space transportation systems such as the Space Launch System. VACCO also utilizes its multi-fab technology and capabilities to produce products for use in space and U.S. Navy applications.

Crissair supplies a wide variety of custom and standard valves, actuators, manifolds and other various components to the aerospace, defense, automotive and commercial industries. Product applications include hydraulic, fuel and air filtration systems for commercial and military fixed wing and rotary aircraft, defense missile systems and commercial engines. Crissair supplies products worldwide to OEMs and to the U.S. Government under long term contracts and to the commercial aftermarket through distribution channels.

Westland is a leading designer and manufacturer of elastomeric-based signature reduction solutions to enhance U.S. Navy maritime survivability. Westland’s products include complex tiles and other shock and vibration dampening systems that reduce passive acoustic signatures and/or modify signal (radar, infrared, acoustical, sonar) emission and reflection to reduce or obscure a vessel’s signature. Westland’s products are used on the majority of the U.S. Naval fleet including submarines, surface ships and aircraft carriers.

Mayday is a manufacturer of mission-critical bushings, pins, sleeves and precision-tolerance machined components for landing gear, rotor heads, engine mounts, flight controls, and actuation systems for the aerospace and defense industry.

Hi-Tech is a full-service metal processor offering aerospace OEM’s and Tier 1 suppliers a large portfolio of processing services including anodizing, cadmium and zinc-nickel plating, organic coatings, non-destructive testing, and heat treatment. Its portfolio includes over 100 OEM processing approvals.

Test

The Test segment accounted for approximately 23%, 28% and 33% of the Company’s total revenue in 2017, 2016 and 2015, respectively.

ETS-Lindgren designs and manufactures products to measure and contain magnetic, electromagnetic and acoustic energy. It supplies customers with a broad range of isolated environments and turnkey systems, including RF test facilities, acoustic test enclosures, RF and magnetically shielded rooms, secure communication facilities, RF measurement systems and broadcast and recording studios. Many of these facilities include proprietary features such as shielded doors and windows. ETS-Lindgren also provides the design, program management, installation and integration services required to successfully complete these types of facilities.

ETS-Lindgren also supplies customers with a broad range of components including RF absorptive materials, RF filters, active compensation systems, antennas, antenna masts, turntables and electric and magnetic probes, RF test cells, proprietary measurement software and other test accessories required to perform a variety of tests. ETS-Lindgren offers a variety of services including calibration for antennas and field probes, chamber certification, field surveys, customer training and a variety of product tests. ETS-Lindgren’s test labs are accredited by the following organizations: American Association for Laboratory Accreditation, National Voluntary Laboratory Accreditation Program and CTIA-The Wireless Association Accredited Test Lab. ETS-Lindgren serves the acoustics, medical, health and safety, electronics, wireless communications, automotive and defense markets.

USG

The USG segment accounted for approximately 24%, 22% and 23% of the Company’s total revenue in 2017, 2016 and 2015, respectively.

Doble develops, manufactures, and delivers diagnostic testing solutions for electrical equipment comprising the electric power grid, and enterprise management systems, that are designed to optimize electrical power assets and system performance, minimize risk and improve operations. It combines three core elements for customers – diagnostic test and monitoring instruments, expert consulting, and testing services – and provides access to its large reserve of related empirical knowledge. Doble flagship solutions include protection diagnostics with the Doble Protection Suite and F6000 series, the M4100 and new transformational patent-pending technology of the M7100 Doble Tester, the dobleARMS® asset risk management system, and the Enoserv PowerBase® and DUCe compliance tools for the North American Electric Reliability Corporation Critical Infrastructure Protection plan (NERC CIP), a set of requirements designed to secure the assets required for operating North America’s bulk electric system. Doble has seven offices in the United States and nine international offices.

Morgan Schaffer designs, develops, manufactures and markets an integrated offering of dissolved gas analysis, oil testing, and data management solutions which enhance the ability of electric utilities to accurately monitor the health of critical power transformers.

NRG is the global market leader in the design and manufacture of decision support tools for the renewable energy industry, primarily wind.

Technical Packaging

The Technical Packaging segment accounted for approximately 12%, 13% and 7% of the Company’s total revenue in 2017, 2016 and 2015, respectively. Prior to 2016 the Technical Packaging business was included in the Filtration segment.

TEQ produces highly engineered thermoformed products and packaging materials for medical, pharmaceutical, retail, food and electronic applications. Through its alliance partner program, TEQ also provides its clients with a total packaging solution including engineering services and testing, sealing equipment and tooling, contract manufacturing, and packing.

Plastique, with locations in the UK and Poland, designs and manufactures plastic and pulp fibre packaging for customers in the personal care, household products, pharmaceutical, food and broader retail markets. Through its Fibrepak brand, Plastique became the first European manufacturer of smooth-surfaced press-to-dry pulp packaging, a sustainable alternative to plastic packaging.

Marketing and Sales

The Company’s products generally are distributed to customers through a domestic and foreign network of distributors, sales representatives, direct sales teams and in-house sales personnel.

The Company’s sales to international customers accounted for approximately $183 million (27%), $168 million (29%) and $152 million (28%) of the Company’s total revenue in 2017, 2016 and 2015, respectively. See Note 13 to the Consolidated Financial Statements included herein for financial information regarding geographic areas. See also Item 1A, “Risk Factors,” for a discussion of risks of the Company’s international operations.

Some of the Company’s products are sold directly or indirectly to the U.S. Government under contracts with the Army, Navy and Air Force and subcontracts with prime contractors of such entities. Direct and indirect sales to the U.S. Government, primarily related to the Filtration segment, accounted for approximately 20%, 14% and 15% of the Company’s total revenue in 2017, 2016 and 2015, respectively.

Intellectual Property

The Company owns or has other rights in various forms of intellectual property (i.e., patents, trademarks, service marks, copyrights, mask works, trade secrets and other items). As a major supplier of engineered products to industrial and commercial markets, the Company emphasizes developing intellectual property and protecting its rights therein. However, the scope of protection afforded by intellectual property rights, including those of the Company, is often uncertain and involves complex legal and factual issues. Some intellectual property rights, such as patents, have only a limited term. Also, there can be no assurance that third parties will not infringe or design around the Company’s intellectual property. Policing unauthorized use of intellectual property is difficult, and infringement and misappropriation are persistent problems for many companies, particularly in some international markets. In addition, the Company may not elect to pursue an unauthorized user due to the high costs and uncertainties associated with litigation. Further, there can be no assurance that courts will ultimately hold issued patents or other intellectual property valid and enforceable. See Item 1A, “Risk Factors.”

A number of products in the Filtration segment are based on patented or otherwise proprietary technology that sets them apart from the competition, such as VACCO’s proprietary quieting technology, Westland’s signature reduction solutions, and Mayday’s and Hi-Tech’s business solutions software.

In the Test segment, patent protection has been sought for significant inventions. Examples of such inventions include novel designs for window and door assemblies used in shielded enclosures and anechoic chambers, improved acoustic techniques for sound isolation and a variety of unique antennas. In addition, the Test segment holds a number of patents, and has patents pending, on products used to perform wireless device testing.

In the USG segment, the segment policy is to seek patent and/or other forms of intellectual property protection on new and improved products, components of products and methods of operation for its businesses, as such developments are made. Doble is pursuing patent protection on improvements to its line of diagnostic equipment and NERC CIP compliance tools. Doble also holds an extensive library of apparatus performance information useful to Doble employees and to entities that generate, distribute or consume electric energy. Doble makes part of this library available to registered users via an Internet portal. NRG is pursuing patent protection on its upcoming line of bat deterrent systems, which are expected to reduce bat mortality at windfarms.

The Technical Packaging segment emphasizes advanced manufacturing technology and methods. For example, the TEQ 3-in-1 tooling system, with an added stacking tool, provides a competitive edge over traditional thermoform tooling; and Plastique’s “Cure-In-The-Mold” technology produces high-quality, smooth-surface, thin-wall packaging products which may be made from sustainable virgin crop fibers or virgin pulp. The segment’s intellectual property consists chiefly of trade secrets and proprietary technology embodied in products for which the Company is the only approved source, such as the TEQconnex^TM and TEQethelyene^TM single polymer sterile barrier medical packaging systems for which TEQ owns the validation studies required to register the package with the FDA.

The Company considers its patents and other intellectual property to be of significant value in each of its segments.

Backlog

Total Company backlog of firm orders at September 30, 2017 was $377.1 million, representing an increase of $50.9 million (16%) from the backlog of $326.2 million on September 30, 2016. The backlog at September 30, 2017 and September 30, 2016, respectively, by segment, was: $203.1 million and $195.8 million for Filtration; $114.8 million and $77.0 million for Test; $35.6 million and $33.7 million for USG; and $23.6 million and $19.7 million for Technical Packaging. The Company estimates that as of September 30, 2017 domestic customers accounted for approximately 73% of the Company’s total firm orders and international customers accounted for approximately 27%. Of the total Company backlog at September 30, 2017, approximately 79% is expected to be completed in the fiscal year ending September 30, 2018.

Purchased Components and Raw Materials

The Company’s products require a wide variety of components and materials. Although the Company has multiple sources of supply for most of its materials requirements, certain components and raw materials are supplied by sole source vendors, and the Company’s ability to perform certain contracts depends on their performance. In the past, these required raw materials and various purchased components generally have been available in sufficient quantities. However, the Company does have some risk of shortages of materials or components due to reliance on sole or limited sources of supply. See Item 1A, “Risk Factors.”

The Filtration segment purchases supplies from a wide array of vendors. In most instances, multiple vendors of raw materials are screened during a qualification process to ensure that there will not be an interruption of supply should one of them underperform or discontinue operations. Nonetheless, in some situations, there is a risk of shortages due to reliance on a limited number of suppliers or because of price fluctuations due to the nature of the raw materials. For example, aerospace-grade titanium and gaseous helium, important raw materials for our Filtration segment subsidiaries, may at times be in short supply.

The Test segment is a vertically integrated supplier of electro-magnetic (EM) shielding and RF absorbing products, producing most of its critical RF components. This segment purchases significant quantities of raw materials such as polyurethane foam, polystyrene beads, steel, aluminum, copper, nickel and wood. Accordingly, it is subject to price fluctuations in the worldwide raw materials markets, although ETS-Lindgren has long-term contracts with a number of its suppliers of certain raw materials.

The USG segment manufactures electronic instrumentation through a network of regional contract manufacturers under long term contracts. In general, USG purchases the same kinds of component parts as do other electronic products manufacturers, and purchases only a limited amount of raw materials.

The Technical Packaging segment selects suppliers initially on the basis of their ability to meet requirements, and then conducts ongoing evaluations and ratings of the supplier’s performance based on a documented evaluation process. The segment purchases raw materials according to a documented and controlled process assuring that purchased materials meet defined specifications. Thermoplastics represent the largest percentage of raw material spend, with purchase prices subject to fluctuation depending on petrochemical industry pricing and capacity in the plastic resin market.

Competition

Competition in the Company’s major markets is broadly based and global in scope. Competition can be particularly intense during periods of economic slowdown, and this has been experienced in some of our markets. Although the Company is a leading supplier in several of the markets it serves, it maintains a relatively small share of the business in many of the other markets it serves. Individual competitors range in size from annual revenues of less than $1 million to billion-dollar enterprises. Because of the specialized nature of the Company’s products, its competitive position with respect to its products cannot be precisely stated. In the Company’s major served markets, competition is driven primarily by quality, technology, price and delivery performance. See also Item 1A, “Risk Factors.”

Primary competitors of the Filtration segment include Pall Corporation, Moog, Inc., Sofrance, CLARCOR Inc., PneuDraulics, Marotta Controls and Parker Hannifin.

The Test segment is a global leader in EM shielding. Significant competitors in this market include Rohde & Schwarz GMBH, Microwave Vision SA (MVG), TDK RF Solutions Inc., Albatross GmbH, IMEDCO AG and Cuming Microwave Corporation.

Significant competitors of the USG segment include OMICRON electronics Corp., Megger Group Limited, Vaisala and Qualitrol Company LLC (a subsidiary of Danaher Corporation).

Significant Competitors of the Technical Packaging segment include Nelipak Corporation, Prent Corporation, Placon Corporation and Sonoco /Alloyd.

Research and Development

Research and development and the Company’s technological expertise are important factors in the Company’s business. Research and development programs are designed to develop technology for new products or to extend or upgrade the capability of existing products, and to enhance their commercial potential. The Company performs research and development at its own expense, and also engages in research and development funded by customers.

Total Company-sponsored research and development expenses were approximately $15.5 million, $12.9 million and $16.7 million for 2017, 2016 and 2015, respectively. In addition, the Company spent approximately $8.3 million, $7.0 million and $6.8 million on customer-sponsored research and development in 2017, 2016 and 2015, respectively, all of which was fully or substantially reimbursed. These amounts exclude certain engineering costs primarily associated with product line extensions, modifications and maintenance, which amounted to approximately $10.4 million, $8.2 million and $8.2 million for 2017, 2016 and 2015, respectively.

Environmental Matters

The Company is involved in various stages of investigation and cleanup relating to environmental matters. It is very difficult to estimate the potential costs of such matters and the possible impact of these costs on the Company at this time due in part to: the uncertainty regarding the extent of pollution; the complexity and changing nature of Government laws and regulations and their interpretations; the varying costs and effectiveness of alternative cleanup technologies and methods; the uncertain level of insurance or other types of cost recovery; the uncertain level of the Company’s responsibility for any contamination; the possibility of joint and several liability with other contributors under applicable law; and the ability of other contributors to make required contributions toward cleanup costs. Based on information currently available, the Company does not believe that the aggregate costs involved in the resolution of any of its environmental matters will have a material adverse effect on the Company’s financial condition or results of operations.

Government Contracts

The Company contracts with the U.S. Government and subcontracts with prime contractors of the U.S. Government. Although VACCO and Westland have a number of “cost-plus” Government contracts, the Company’s Government contracts also include firm fixed-price contracts under which work is performed and paid for at a fixed amount without adjustment for the actual costs experienced in connection with the contracts. All Government prime contracts and virtually all of the Company’s Government subcontracts provide that they may be terminated at the convenience of the Government or the customer. Upon such termination, the Company is normally entitled to receive equitable compensation from the customer. See “Marketing and Sales” in this Item 1, and Item 1A, “Risk Factors,” for additional information regarding Government contracts and related risks.

Discontinued Operations

During 2014, the Company sold that portion of the Company’s USG segment represented by Aclara Technologies LLC and two related entities (together, Aclara), a leading supplier of data communications systems and related software used by electric, gas and water utilities in support of their advanced metering infrastructure deployments, typically encompassing the utility’s entire service area. Aclara’s largest contracts, such as those with Pacific Gas & Electric Company and Southern California Gas Co., each involve several million end points. However, the purchase price was not finally determined until 2015. Prior to the sale Aclara constituted a component of the Company with operations and cash flows that were clearly distinguishable, operationally and for financial reporting purposes, from the rest of the entity. Accordingly, for financial reporting purposes Aclara is reflected for 2015 as discontinued operations. Unless otherwise specifically stated, all operating results presented in this report are exclusive of discontinued operations.

Employees

As of September 30, 2017, the Company employed 3,254 persons, including 3,029 full time employees. Of the Company’s full-time employees, 2,352 were located in the United States and 677 were located in 17 foreign countries.

Financing

For information about the Company’s credit facility, see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Bank Credit Facility,” and Note 8 to the Consolidated Financial Statements included herein, which are incorporated into this Item by reference.

Additional Information

The information set forth in Item 1A, “Risk Factors,” is incorporated in this Item by reference.

The Company makes available free of charge on or through its website, www.escotechnologies.com, its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after such material is electronically filed with or furnished to the Securities and Exchange Commission. Information contained on the Company’s website is not incorporated into this Report.

Executive Officers of the Registrant

The following sets forth certain information as of November 1, 2017 with respect to the Company’s executive officers. These officers are elected annually to terms which expire at the first meeting of the Board of Directors after the next Annual Meeting of Stockholders.

* Mr. Richey also serves as Chairman of the Executive Committee of the Board of Directors.

There are no family relationships among any of the executive officers and directors.

Item 1A. Risk Factors

This Form 10-K, including Item 1, “Business,” Item 2, “Properties,” Item 3, “Legal Proceedings,” Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and Item 7A, “Quantitative and Qualitative Disclosures About Market Risk,” contains “forward-looking statements” within the meaning of the safe harbor provisions of the federal securities laws, as described under “Forward-Looking Statements” above.

In addition to the risks and uncertainties discussed in that section and elsewhere in this Form 10-K, the following important risk factors could cause actual results and events to differ materially from those contained in any forward-looking statements, or could otherwise adversely affect the Company’s business, operating results or financial condition:

Our sales of products to the Government depend upon continued Government funding.

Sales to the U.S. Government and its prime contractors and subcontractors represent a significant portion of our business. Over the past three fiscal years, from 14% to 20% of our revenues from continuing operations have been generated from sales to the U.S. Government or its contractors, primarily within our Filtration segment. These sales are dependent on government funding of the underlying programs, which is generally subject to annual Congressional appropriations. There could be reductions or terminations of, or delays in, the government funding on programs which apply to us or our customers. These funding effects could adversely affect our sales and profit, and could bring about a restructuring of our operations, which could result in an adverse effect on our financial condition or results of operations. A significant part of VACCO’s and Westland’s sales involve major U.S. Government programs such as NASA’s Space Launch System (SLS) and the U.S. Navy’s submarine program. A reduction or delay in Government spending on these programs could have a significant adverse impact on our financial results which could extend for more than a single year.

Negative worldwide economic conditions and related credit shortages could result in a decrease in our sales and an increase in our operating costs, which could adversely affect our business and operating results.

If there is a worsening of global and U.S. economic and financial market conditions and additional tightening of global credit markets, many of our customers may further delay or reduce their purchases of our products. During 2016, the government of Saudi Arabia announced several austerity programs which may impact future business in that country; although their impact is still unknown it could be significant and could adversely affect future extensions of Doble’s current multi-year project there involving the national power grid. Uncertainties in the global economy may cause the utility industry and commercial market customers to experience shortages in available credit, which could limit capital spending. To the extent this problem affects our customers, our sales and profits could be adversely affected. Likewise, if our suppliers face challenges in obtaining credit, they may have to increase their prices or become unable to continue to offer the products and services we use to manufacture our products, which could have an adverse effect on our business, results of operations and financial condition.

Our quarterly results may fluctuate substantially.

We have experienced variability in quarterly results and believe our quarterly results will continue to fluctuate as a result of many factors, including the size and timing of customer orders, governmental approvals and funding levels, changes in existing taxation rules or practices, the gain or loss of significant customers, timing and levels of new product developments, shifts in product or sales channel mix, increased competition and pricing pressure, and general economic conditions.

A significant part of our manufacturing operations depends on a small number of third-party suppliers.

A significant part of our manufacturing operations relies on a small number of third-party manufacturers to supply component parts or products. For example, Doble has arrangements with four manufacturers which produce and supply substantially all of its end-products. One of these suppliers produces more than 50% of Doble’s products from a single location within the United States. A significant disruption in the supply of those products could negatively affect the timely delivery of products to customers as well as future sales, which could increase costs and reduce margins.

Certain of our other businesses are dependent upon sole source or a limited number of third-party manufacturers of parts and components. Many of these suppliers are small businesses. Since alternative supply sources are limited, there is an increased risk of adverse impacts on our production schedules and profits if our suppliers were to default in fulfilling their price, quality or delivery obligations. In addition, some of our customers or potential customers may prefer to purchase from a supplier which does not have such a limited number of sources of supply.

Increases in prices of raw material and components, and decreased availability of such items, could adversely affect our business.

The cost of raw materials and product components is a major element of the total cost of many of our products. For example, our Test segment’s critical components rely on purchases of raw materials from third parties. Increases in the prices of raw materials (such as steel, copper, nickel, zinc, wood and petrochemical products) could have an adverse impact on our business by, among other things, increasing costs and reducing margins. Aerospace-grade titanium and gaseous helium, important raw materials for our Filtration segment, may at times be in short supply. Further, many of Doble’s items of equipment which are provided to its customers for their use are in the maturity of their life cycles, which creates the risk that replacement components may be unavailable or available only at increased costs.

In addition, our reliance on sole or limited sources of supply of raw materials and components in each of our segments could adversely affect our business, as described in the preceding Risk Factor. Weather-created disruptions in supply, in addition to affecting costs, could impact our ability to procure an adequate supply of these raw materials and components, and delay or prevent deliveries of products to our customers.

Our international operations expose us to fluctuations in currency exchange rates that could adversely affect our results of operations and cash flows.

We have significant manufacturing and sales activities in foreign countries, and our domestic operations have sales to foreign customers. Our financial results may be affected by fluctuations in foreign currencies and by the translation of the financial statements of our foreign subsidiaries from local currencies into U.S. dollars. In addition, a rise in the dollar against foreign currencies could make our products more expensive for foreign customers and cause them to reduce the volume of their purchases.

Failure or delay in new product development could reduce our future sales.

Much of our business is dependent on the continuous development of new products and technologies to meet the changing needs of our markets on a cost-effective basis. Many of these markets are highly technical from an engineering standpoint, and the relevant technologies are subject to rapid change. If we fail to timely enhance existing products or develop new products as needed to meet market or competitive demands, we could lose sales opportunities, which would adversely affect our business. In addition, in some existing contracts with customers, we have made commitments to develop and deliver new products. If we fail to meet these commitments, the default could result in the imposition on us of contractual penalties including termination. Our inability to enhance existing products in a timely manner could make our products less competitive, while our inability to successfully develop new products may limit our growth opportunities. Development of new products and product enhancements may also require us to make greater investments in research and development than we now do, and the increased costs associated with new product development and product enhancements could adversely affect our operating results. In addition, our costs of new product development may not be recoverable if demand for our products is not as great as we anticipate it to be.

Changes in testing standards could adversely impact our Test and USG segments’ sales.

A significant portion of the business of our Test and USG segments involves sales to technology customers who need to have a third party verify that their products meet specific international and domestic test standards. If regulatory agencies were to eliminate or reduce certain domestic or international test standards, or if demand for product testing from these customers were to decrease for some other reason, our sales could be adversely affected. For example, if Wi-Fi technology in mobile phones were to be superseded by a new communications technology, then there might be no need for certain testing on mobile phones; or if a regulatory authority were to relax the test standards for certain electronic devices because they were determined not to interfere with the broadcast spectrum, our sales of certain testing products could be significantly reduced.

The end of customer product life cycles could negatively affect our Filtration segment’s results.

Many of our Filtration segment products are sold to be components in our customers’ end-products. If a customer discontinues a certain end-product line, our ability to continue to sell those components will be reduced or eliminated. The result could be a significant decrease in our sales. For example, a substantial portion of PTI’s revenue is generated from commercial aviation aftermarket sales. As certain aircraft are retired and replaced by newer aircraft, there could be a corresponding decrease in sales associated with our current products. Such a decrease could adversely affect our operating results.

Product defects could result in costly fixes, litigation and damages.

Our business exposes us to potential product liability risks that are inherent in the design, manufacture and sale of our products and the products of third-party vendors which we use or resell. If there are claims related to defective products (under warranty or otherwise), particularly in a product recall situation, we could be faced with significant expenses in replacing or repairing the product. For example, the Filtration segment obtains raw materials, machined parts and other product components from suppliers who provide certifications of quality which we rely on. Should these product components be defective and pass undetected into finished products, or should a finished product contain a defect, we could incur significant costs for repairs, re-work and/or removal and replacement of the defective product. In addition, if a dispute over product claims cannot be settled, arbitration or litigation may result, requiring us to incur attorneys’ fees and exposing us to the potential of damage awards against us.

We may not be able to identify suitable acquisition candidates or complete acquisitions successfully, which may inhibit our rate of growth.

As part of our growth strategy, we plan to continue to pursue acquisitions of other companies, assets and product lines that either complement or expand our existing business. However, we may be unable to implement this strategy if we are unable to identify suitable acquisition candidates or consummate future acquisitions at acceptable prices and terms. We expect to face competition for acquisition candidates which may limit the number of acquisition opportunities available to us and may result in higher acquisition prices. As a result, we may be limited in the number of acquisitions which we are able to complete and we may face difficulties in achieving the profitability or cash flows needed to justify our investment in them.

Our acquisitions of other companies carry risk.

Acquisitions of other companies involve numerous risks, including difficulties in the integration of the operations, technologies and products of the acquired companies, the potential exposure to unanticipated and undisclosed liabilities, the potential that expected benefits or synergies are not realized and that operating costs increase, the potential loss of key personnel, suppliers or customers of acquired businesses and the diversion of Management’s time and attention from other business concerns. Although we attempt to identify and evaluate the risks inherent in any acquisition, we may not properly ascertain or mitigate all such risks, and our failure to do so could have a material adverse effect on our business.

We may incur significant costs, experience short term inefficiencies, or be unable to realize expected long term savings from facility consolidations and other business reorganizations.

We periodically assess the cost and operational structure of our facilities in order to manufacture and sell our products in the most efficient manner, and based on these assessments, we may from time to time reorganize, relocate or consolidate certain of our facilities. These actions may require us to incur significant costs and may result in short term business inefficiencies as we consolidate and close facilities and transition our employees; and in addition, we may not achieve the expected long term benefits. Any or all of these factors could result in an adverse impact on our operating results, cash flows and financial condition.

The trading price of our common stock continues to be volatile and may result in investors selling shares of our common stock at a loss.

The trading price of our common stock is volatile and subject to wide fluctuations in price in response to various factors, many of which are beyond our control, including those described in this section and including but not limited to: actual or anticipated variations in our quarterly operating results; changes in financial estimates by securities analysts that cover our stock or our failure to meet those estimates; substantial sales of our common stock by our existing shareholders; and general stock market conditions. In recent years the stock markets in general have experienced dramatic price and volume fluctuations, which may continue indefinitely, and changes in industry, general economic or market conditions could harm the price of our stock regardless of our operating performance.

The Company has guaranteed certain Aclara contracts.

In the normal course of business during the time that Aclara was our subsidiary, we agreed to provide guarantees of Aclara’s performance under certain real property leases, certain vendor contacts, and certain large, long-term customer contracts for the delivery, deployment and performance of AMI systems such as those described under “Discontinued Operations” in Item 1. In connection with the sale of Aclara, we agreed to remain a guarantor of Aclara’s performance of these contracts. If Aclara were to fail to perform any of these guaranteed contracts, the other party to the contract could seek damages from us resulting from the non-performance, and if we were determined to be liable for these damages they could have a material adverse effect on our business, operating results or financial condition. Although we would be entitled to seek indemnification from Aclara for these damages, our ability to recover would be subject to Aclara’s financial position at that time.

We may not realize as revenue the full amounts reflected in our backlog.

As of September 30, 2017 our twelve-month backlog was approximately $299 million, which represents confirmed orders we believe will be recognized as revenue within the next twelve months. There can be no assurance that our customers will purchase all the orders represented in our backlog, particularly as to contracts which are subject to the U.S. Government’s ability to modify or terminate major programs or contracts, and if and to the extent that this occurs, our future revenues could be materially reduced.

Economic, political and other risks of our international operations, including terrorist activities, could adversely affect our business.

In 2017, approximately 27% of our net sales were to customers outside the United States. An economic downturn or an adverse change in the political situation in certain foreign countries in which we do business could cause a decline in revenues and adversely affect our financial condition. For example, our Test segment does significant business in Asia, and changes in the Asian political climate or political changes in specific Asian countries could negatively affect our business; several of our subsidiaries are based in Europe and could be negatively impacted by weakness in the European economy; Doble’s and Plastique’s UK-based businesses could be adversely affected by Brexit; and Doble’s future business in Saudi Arabia as well as elsewhere in the Middle East could be adversely affected by government austerity programs, continuing political unrest, wars and terrorism in the region.

Our international sales are also subject to other risks inherent in foreign commerce, including currency fluctuations and devaluations, differences in foreign laws, uncertainties as to enforcement of contract rights, and difficulties in negotiating and resolving disputes with our foreign customers.

Our governmental sales and our international and export operations are subject to special U.S. and foreign government laws and regulations which may impose significant compliance costs, create reputational and legal risk, and impair our ability to compete in international markets.

The international scope of our operations subjects us to a complex system of commercial and trade regulations around the world, and our foreign operations are governed by laws and business practices that often differ from those of the U.S. In addition, laws such as the U.S. Foreign Corrupt Practices Act and similar laws in other countries increase the need for us to manage the risks of improper conduct not only by our own employees but by distributors and contractors who may not be within our direct control. Many of our exports are of products which are subject to U.S. Government regulations and controls such as the U.S. International Traffic in Arms Regulations (ITAR), which impose certain restrictions on the U.S. export of defense articles and services, and these restrictions are subject to change from time to time, including changes in the countries into which our products may lawfully be sold.

If we were to fail to comply with these laws and regulations we could be subject to significant fines, penalties and other sanctions including the inability to continue to export our products or to sell our products to the U.S. Government or to certain other customers. In addition, some of these regulations may be viewed as too restrictive by our international customers, who may elect to develop their own domestic products or procure products from other international suppliers which are not subject to comparable export restrictions; and the laws, regulations or policies of certain other countries may also favor their own domestic suppliers over foreign suppliers such as the Company.

Despite our efforts, we may be unable to adequately protect our intellectual property.

Much of our business success depends on our ability to protect and freely utilize our various intellectual properties, including both patents and trade secrets. Despite our efforts to protect our intellectual property, unauthorized parties or competitors may copy or otherwise obtain and use our products and technology, particularly in foreign countries such as China where the laws may not protect our proprietary rights as fully as in the United States. Our current and future actions to enforce our proprietary rights may ultimately not be successful; or in some cases we may not elect to pursue an unauthorized user due to the high costs and uncertainties associated with litigation. We may also face exposure to claims by others challenging our intellectual property rights. Any or all of these actions may divert our resources and cause us to incur substantial costs.

Disputes with contractors could adversely affect our Test segment’s results.

A major portion of our Test segment’s business involves working in conjunction with general contractors to produce complex building components constructed on-site, such as electronic test chambers, secure communication rooms and MRI facilities. If there are performance problems caused by either us or a contractor, they could result in cost overruns and may lead to a dispute as to which party is responsible. The resolution of such disputes can involve arbitration or litigation, and can cause us to incur significant expense including attorneys’ fees. In addition, these disputes could result in a reduction in revenue, a loss on a particular project, or even a significant damages award against us.

Environmental or regulatory requirements could increase our expenses and adversely affect our profitability.

Our operations and properties are subject to U.S. and foreign environmental laws and regulations governing, among other things, the generation, storage, emission, discharge, transportation, treatment and disposal of hazardous materials and the clean-up of contaminated properties. These regulations, and changes to them, could increase our cost of compliance, and our failure to comply could result in the imposition of significant fines, suspension of production, alteration of product processes, cessation of operations or other actions which could materially and adversely affect our business, financial condition and results of operations.

We are currently involved as a responsible party in several ongoing investigations and remediations of contaminated third-party owned properties. In addition, environmental contamination may be discovered in the future on properties which we formerly owned or operated and for which we could be legally responsible. Future costs associated with these situations, including ones which may be currently unknown to us, are difficult to quantify but could have a significant effect on our financial condition. See Item 1, “Business – Environmental Matters” for a discussion of these factors.

We are or may become subject to legal proceedings that could adversely impact our operating results.

We are, and will likely be in the future, a party to a number of legal proceedings and claims involving a variety of matters, including environmental matters such as those described in the preceding risk factor and disputes over the ownership or use of intellectual property. Given the uncertainties inherent in litigation, including but not limited to the possible discovery of facts adverse to our position, adverse rulings by a court or adverse decisions by a jury, it is possible that such proceedings could result in a liability that we may have not adequately reserved for, that may not be adequately covered by insurance, or that may otherwise have a material adverse effect on our financial condition or results of operations.

The loss of specialized key employees could affect our performance and revenues.

There is a risk of our losing key employees having engineering and technical expertise to other employers. For example, our USG segment relies heavily on engineers with significant experience and reputation in the utility industry to furnish expert consulting services and support to customers. There is a current trend of a shortage of these qualified engineers because of hiring competition from other companies in the industry. Loss of these employees to other employers could reduce the segment’s ability to provide services and negatively affect our revenues.

Our decentralized organizational structure presents certain risks.

We are a relatively decentralized company in comparison with some of our peers. This decentralization necessarily places significant control and decision-making powers in the hands of local management, which present various risks, including the risk that we may be slower or less able to identify or react to problems affecting a key business than we would in a more centralized management environment. We may also be slower to detect or react to compliance related problems (such as an employee undertaking activities prohibited by applicable law or by our internal policies), and Company-wide business initiatives may be more challenging and costly to implement, and the risks of noncompliance or failures higher, than they would be under a more centralized management structure. Depending on the nature of the problem or initiative in question, such noncompliance or failure could materially adversely affect our business, financial condition or result of operations.

Provisions in our articles of incorporation, bylaws and Missouri law could make it more difficult for a third party to acquire us and could discourage acquisition bids or a change of control, and could adversely affect the market price of our common stock.

Our articles of incorporation and bylaws contain certain provisions which could discourage potential hostile takeover attempts, including: a limitation on the shareholders’ ability to call special meetings of shareholders; advance notice requirements to nominate candidates for election as directors or to propose matters for action at a meeting of shareholders; a classified board of directors, which means that approximately one-third of our directors are elected each year; and the authority of our board of directors to issue, without shareholder approval, preferred stock with such terms as the board may determine. In addition, the laws of Missouri, in which we are incorporated, require a two-thirds vote of outstanding shares to approve mergers or certain other major corporate transactions, rather than a simple majority as in some other states such as Delaware. These provisions could impede a merger or other change of control not approved by our board of directors, which could discourage takeover attempts and in some circumstances reduce the market price of our common stock.

Item 1B. Unresolved Staff Comments

None

Item 2. Properties

The Company believes its buildings, machinery and equipment have been generally well maintained, are in good operating condition and are adequate for the Company’s current production requirements and other needs.

The Company’s principal manufacturing facilities and other materially important properties, including those described in the table below, comprise approximately 1,644,000 square feet of floor space, of which approximately 888,000 square feet are owned and approximately 756,000 square feet are leased. Leased facilities of less than 10,000 square feet are not included in the table. See also Notes 14 and 15 to the Consolidated Financial Statements included herein.

Item 3. Legal Proceedings

As a normal incident of the businesses in which the Company is engaged, various claims, charges and litigation are asserted or commenced from time to time against the Company. With respect to claims and litigation currently asserted or commenced against the Company, it is the opinion of Management that final judgments, if any, which might be rendered against the Company are adequately reserved for, are covered by insurance, or are not likely to have a material adverse effect on the Company’s financial condition or results of operations. Nevertheless, given the uncertainties of litigation, it is possible that such claims, charges and litigation could have a material adverse impact on the Company; see Item 1A, “Risk Factors.”

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Price Range Of Common Stock. The Company’s common stock is listed on the New York Stock Exchange under the symbol “ESE.” The following table summarizes the high and low prices of the common stock for each quarter in the last two fiscal years.

Holders of Record. As of October 31, 2017 there were approximately 1,829 holders of record of the Company’s common stock.

Dividends. For information about dividends paid on the common stock in the last two fiscal years, please refer to Note 16 to the Company’s Consolidated Financial Statements included herein.

Company Purchases of Equity Securities. The Company did not repurchase any shares of its common stock during the fourth quarter of fiscal 2017.

Securities Authorized for Issuance Under Equity Compensation Plans. For information about securities authorized for issuance under the Company’s equity compensation plans, please refer to Item 12 of this Form 10-K and to Note 10 to the Company’s Consolidated Financial Statements included herein.

Performance Graph. The graph and table below present a comparison of the cumulative total shareholder return on the Company’s common stock as measured against the Russell 2000 index and two customized peer groups whose individual component companies are listed below. Because the Company changed the composition of the peer group for 2017, as described below, the peer group used for the corresponding disclosures in 2016 is also shown for comparison. The Company is not a component of either the 2017 peer group or the 2016 peer group, but it is a component of the Russell 2000 Index. The measurement period begins on September 30, 2012 and measures at each September 30 thereafter. These figures assume that all dividends, if any, paid over the measurement period were reinvested, and that the starting values of each index and the investments in the Company’s common stock were $100 at the close of trading on September 30, 2012.

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN

Among ESCO Technologies Inc., the Russell 2000 Index,
2016 Peer Group and 2017 Peer Group

Copyright© 2017 Russell Investment Group. All rights reserved.

The 2017 peer group was composed of ten companies that corresponded to the Company’s four industry segments used for financial reporting purposes during 2017, as follows: Filtration/Fluid Flow segment (41% of the Company’s 2017 total revenue): CIRCOR International, Inc., Donaldson Company, Inc. and Moog Inc.; Test segment (23% of the Company’s 2017 total revenue): EXFO Inc. and FARO Technologies, Inc.; USG segment (24% of the Company’s 2017 total revenue): Aegion Corporation, Ameresco, Inc. and Thermon Group Holdings, Inc.; and Technical Packaging Segment (12% of the Company’s 2017 total revenue): AptarGroup, Inc. and Bemis Company, Inc.

The 2016 peer group was originally composed of eleven companies that corresponded to the Company’s four industry segments used for financial reporting purposes during 2016, as follows: Filtration/Fluid Flow segment (36% of the Company’s 2016 total revenue): CIRCOR International, Inc., CLARCOR Inc., Donaldson Company, Inc. and Moog Inc.; Test segment (28% of the Company’s 2016 total revenue): EXFO Inc. and FARO Technologies, Inc.; USG segment (23% of the Company’s 2016 total revenue): Aegion Corporation, Ameresco, Inc. and EnerNOC, Inc.; and Technical Packaging Segment (13% of the Company’s 2016 total revenue): AptarGroup, Inc. and Bemis Company, Inc. However, because two of the companies, CLARCOR Inc. and EnerNOC, Inc., were acquired during 2017, these two companies are not included in the total return calculations above.

In calculating the composite return of the 2016 and 2017 peer groups, the return of each company comprising the peer group was weighted by (a) its market capitalization in relation to the other companies in its corresponding Company industry segment, and (b) the percentage of the Company’s total revenue represented by its corresponding Company industry segment.

Item 6. Selected Financial Data

The following selected consolidated financial data of the Company and its subsidiaries should be read in conjunction with the Company’s Consolidated Financial Statements, the Notes thereto, and Management’s Discussion and Analysis of Financial Condition and Results of Operations, as of the respective dates indicated and for the respective periods ended thereon.

See also Note 2 to the Consolidated Financial Statements included herein for discussion of acquisition activity.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with the Consolidated Financial Statements included herein and Notes thereto and refers to the Company’s results from continuing operations, except where noted.

Introduction

ESCO Technologies Inc. and its wholly owned subsidiaries (the Company) are organized into four operating segments for financial reporting purposes: Filtration/Fluid Flow (Filtration), RF Shielding and Test (Test), Utility Solutions Group (USG), and Technical Packaging. The Company’s business segments are comprised of the following primary operating entities:

Filtration. PTI, VACCO and Crissair primarily design and manufacture specialty filtration products including hydraulic filter elements and fluid control devices used in commercial aerospace applications, unique filter mechanisms used in micro-propulsion devices for satellites and custom designed filters for manned aircraft and submarines. Westland designs, develops and manufactures elastomeric-based signature reduction solutions for U.S. naval vessels. Mayday designs and manufactures mission-critical bushings, pins, sleeves and precision-tolerance machined components for landing gear, rotor heads, engine mounts, flight controls, and actuation systems for the aerospace and defense industries. Hi-Tech is a full-service metal processor serving aerospace suppliers.

Test. ETS-Lindgren is an industry leader in providing its customers with the ability to identify, measure and contain magnetic, electromagnetic and acoustic energy.

USG. Doble provides high-end, intelligent diagnostic test solutions for the electric power delivery industry and is a leading supplier of power factor and partial discharge testing instruments used to assess the integrity of high-voltage power delivery equipment. Morgan Schaffer provides an integrated offering of dissolved gas analysis, oil testing, and data management solutions which enhance the ability of electric utilities to accurately monitor the health of critical power transformers. NRG designs and manufactures decision support tools for the renewable energy industry, primarily wind.

Technical Packaging. The companies within this segment provide innovative solutions to the medical and commercial markets for thermoformed and precision molded pulp fiber packages and specialty products using a wide variety of thin gauge plastics and pulp.

The Company continues to operate with meaningful growth prospects in its primary served markets and with considerable financial flexibility. The Company continues to focus on new products that incorporate proprietary design and process technologies. Management is committed to delivering shareholder value through organic growth, ongoing performance improvement initiatives, and acquisitions.

Highlights of 2017 Operations

Results of Operations

Net Sales

Net sales increased $114.2 million, or 20.0%, to $685.7 million in 2017 from $571.5 million in 2016. The increase in net sales in 2017 as compared to 2016 was due to a $71.7 million increase in the Filtration segment, a $34.6 million increase in the USG segment and an $8.5 million increase in the Technical Packaging segment, partially offset by a $0.6 million decrease in the Test segment.

Net sales increased $34.2 million, or 6.4%, to $571.5 million in 2016 from $537.3 million in 2015. The increase in net sales in 2016 as compared to 2015 was due to a $35.0 million increase in the Technical Packaging segment, an $11.1 million increase in the Filtration segment and a $4.2 million increase in the USG segment, partially offset by a $16.1 million decrease in the Test segment.

Filtration.

The $71.7 million, or 34.5% increase in net sales in 2017 as compared to 2016 was primarily driven by the Company’s recent acquisitions of Westland and Mayday, described under “Acquisitions” below, which contributed $21.0 million and $40.0 million, respectively; and a $12.4 million increase at VACCO due to higher shipments of its defense products including Navy spares, partially offset by a $2.4 million decrease in sales at Crissair due to lower aerospace shipments.

The $11.1 million, or 5.6%, increase in net sales in 2016 as compared to 2015 was primarily due to a $4.6 million increase in net sales from Crissair due to higher aerospace shipments, a $2.5 million increase in net sales from PTI due to higher shipments of aero assemblies and elements, a $1.4 million increase in net sales from VACCO due to higher shipments of its Space products and a $2.5 million sales contribution from Westland (acquired on September 2, 2016).

Test.

The net sales decrease of $0.6 million in 2017 as compared to 2016 was mainly due to a $6.4 million decrease in net sales from the Company’s European operations due to the 2016 restructuring activities to close the Test business operating facilities in Germany and England, offset by a $7.5 million increase in net sales from its U.S. operations related to higher sales volumes of chamber projects.

The net sales decrease of $16.1 million, or 9.1%, in 2016 as compared to 2015 was mainly due to a $12 million decrease in net sales from the segment’s European operations due to the 2016 restructuring activities mentioned above and a $10 million decrease in net sales from the segment’s U.S. operations driven by a decrease in acoustic projects, partially offset by a $6 million increase in net sales from the segment’s Asian operations driven by timing of projects.

USG.

The net sales increase of $34.6 million, or 27.1% in 2017 as compared to 2016 was mainly driven by the Company’s 2017 acquisitions of NRG and Morgan Schaffer, described under “Acquisitions” below, which contributed $16.2 million and $6.5 million, respectively; and an $11.9 million increase in net sales at Doble from new products and software solutions.

The net sales increase of $4.2 million, or 3.4%, in 2016 as compared to 2015 was driven by additional software and service revenue at Doble and the sales contribution from the Enoserv acquisition (acquired January 2015).

Technical Packaging.

The $8.5 million, or 11.4%, increase in net sales in 2017 as compared to 2016 was mainly due to the $9.3 million increase in sales contribution from Plastique which was acquired in January 2016 partially offset by a $0.8 million decrease in net sales from TEQ due to lower shipments to medical customers.

The $35.0 million, or 88.8%, increase in net sales in 2016 as compared to 2015 was primarily driven by the 2016 acquisitions of Plastique and Fremont, which contributed $22 million and $7 million, respectively, to 2016 sales and an increase in shipments to commercial customers.

Orders and Backlog

New orders received in 2017 were $736.6 million as compared to $570.2 million in 2016, resulting in order backlog of $377.1 million at September 30, 2017 as compared to order backlog of $326.2 million at September 30, 2016. Orders are entered into backlog as firm purchase order commitments are received.

In 2017, the Company recorded $286.8 million of orders related to Filtration products, $198.6 million of orders related to Test products, $164.3 million of orders related to USG products and $86.9 million of orders related to Technical Packaging products. In 2016, the Company recorded $224.7 million of orders related to Filtration products, $143.4 million of orders related to Test products, $125.3 million of orders related to USG products and $76.8 million of orders related to Technical Packaging products.

Selling, General and Administrative Expenses

Selling, general and administrative (SG&A) expenses were $148.4 million, or 21.6% of net sales, in 2017; $131.5 million, or 23.0% of net sales, in 2016; and $130.2 million, or 24.2% of net sales, in 2015.

The increase in SG&A expenses in 2017 as compared to 2016 was mainly due to an increase in SG&A expenses both within the Filtration segment (due to the acquisitions of Mayday and Westland, which contributed $9.3 million to the increase) and the USG segment (due to the acquisitions of NRG and Morgan Schaffer, which contributed $6.9 million to the increase, as well as additional sales and marketing expenses at Doble), partially offset by a decrease in SG&A expenses in the Test segment (as a result of the 2016 restructuring activities).

The increase in SG&A expenses in 2016 as compared to 2015 was mainly due to an increase in SG&A expenses both within the Technical Packaging segment (due to the acquisitions of Plastique and Fremont) and at Corporate (higher acquisition costs, including professional fees), partially offset by a decrease in SG&A expenses within the Test and USG segments due to the facility consolidations and headcount reductions.

Amortization Of Intangible Assets

Amortization of intangible assets was $16.3 million in 2017, $11.6 million in 2016 and $8.9 million in 2015. Amortization of intangible assets included $8.6 million, $4.9 million and $4.0 million of amortization of acquired intangible assets in 2017, 2016 and 2015, respectively, related to the Company’s acquisitions. The amortization of acquired intangible assets related to the Company’s acquisitions is included in the Corporate operating segment’s results. The remaining amortization expenses relate to other identifiable intangible assets (primarily software, patents and licenses), which are included in the respective segment’s operating results. The increase in amortization expense in 2017 as compared to 2016 and 2015 was mainly due to the amortization of intangibles related to the Company’s recent acquisitions and an increase in software amortization.

Other Expenses (Income), Net

Other income, net, was $0.7 million in 2017, compared to other expenses, net, of $7.8 million in 2016 and $1.1 million in 2015. The principal components of other income, net, in 2017 included $0.6 million from the sale of certain intellectual property and $0.4 million related to death benefit insurance proceeds from a former subsidiary. The principal components of other expenses, net, in 2016 included $4.9 million of restructuring costs related to the Test segment facility consolidation and $2.2 million of costs related to the USG segment restructuring activities. The restructuring costs mainly related to severance and compensation benefits, professional fees and asset impairment charges related to abandoned assets. The principal component of other expenses, net, in 2015 was $0.9 million of severance expenses related to headcount reductions primarily at VACCO. There were no other individually significant items included in other expenses (income), net, in 2017, 2016 or 2015.

Non-GAAP Financial Measures

The information reported herein includes the financial measures EPS – As Adjusted, which the Company defines as EPS from continuing operations less defined purchase accounting inventory step-up charges and acquisition costs in 2017 and the restructuring charges related to the Test and Doble restructuring actions in 2016; EBIT, which the Company defines as earnings before interest and taxes from continuing operations, without adjustment for the defined purchase accounting inventory step-up charges, acquisition costs and restructuring charges; and EBIT margin, which the Company defines as EBIT expressed as a percentage of net sales. EPS – As Adjusted, EBIT on a consolidated basis, and EBIT margin on a consolidated basis are not recognized in accordance with U.S. generally accepted accounting principles (GAAP). However, the Company believes that EBIT and EBIT margin provide investors and Management with valuable information for assessing the Company’s operating results. Management evaluates the performance of its operating segments based on EBIT and believes that EBIT is useful to investors to demonstrate the operational profitability of the Company’s business segments by excluding interest and taxes, which are generally accounted for across the entire company on a consolidated basis. EBIT is also one of the measures Management uses to determine resource allocations and incentive compensation. The Company believes that the presentation of EBIT, EBIT margin and EPS – As Adjusted provides important supplemental information to investors by facilitating comparisons with other companies, many of which use similar non-GAAP financial measures to supplement their GAAP results. The use of non-GAAP financial measures is not intended to replace any measures of performance determined in accordance with GAAP.

EBIT

The reconciliation of EBIT from continuing operations to a GAAP financial measure is as follows:

Filtration

EBIT increased $7.0 million in 2017 as compared to 2016 mainly due to the EBIT contribution from the Westland and Mayday acquisitions and an increase at VACCO and PTI due to increased sales volumes. EBIT as a percent of net sales decreased in 2017 compared to 2016 mainly due to the purchase accounting inventory step-up charge at Mayday of $1.9 million in 2017 and engineering and development cost growth on certain fixed price development contracts at VACCO.

EBIT increased $3.5 million in 2016 as compared to 2015 mainly due to the increased sales volumes at Crissair and VACCO and the EBIT contribution from the 2016 acquisition of Westland, partially offset by lower margins at PTI due to the impact of early stage production volumes.

Test

The $5.6 million increase in EBIT in 2017 as compared to 2016 was primarily due to the $5.1 million of restructuring charges incurred in 2016 related to closing the Test business operating facilities in Germany and England, consisting mainly of employee severance and compensation benefits, professional fees, and asset impairment charges.

The $4.4 million increase in EBIT in 2016 as compared to 2015 was mainly due to the higher sales volumes from the segment’s Asian operations and operational improvement initiatives that were partially offset by $5.1 million of incremental restructuring charges related to closing the Test business operating facilities in Taufkirchen, Germany and Stevenage, England consisting mainly of employee severance and compensation benefits, professional fees, and asset impairment charges. In addition, 2015 EBIT was negatively impacted by incremental charges related to the write-down of certain inventories.

USG

The $5.5 million increase in EBIT in 2017 as compared to 2016 was primarily due to higher sales volumes and additional contribution from new products and software solutions, as well as the EBIT contribution from the 2017 acquisitions of NRG, Morgan Schaffer and Vanguard Instruments. EBIT as a percent of net sales decreased in 2017 compared to 2016 mainly due to the purchase accounting inventory step-up charges at NRG, Morgan Schaffer and Vanguard Instruments totaling $1.9 million.

The $1.5 million increase in EBIT in 2016 as compared to 2015 was primarily due to an increase in sales volumes and the full year EBIT contribution from the 2015 acquisition of Enoserv. In addition, 2016 EBIT was negatively impacted by $2.0 million of incremental restructuring charges incurred related to the closing of the Brazil office consisting mainly of employee severance and compensation benefits and asset write downs.

Technical Packaging

EBIT decreased $1.1 million in 2017 as compared to 2016 mainly due to higher SG&A expenses at Plastique due to the full year being included in 2017.

EBIT increased $4.7 million in 2016 as compared to 2015 mainly due to the acquisitions of Plastique and Fremont and the higher sales volumes to commercial and medical customers.

Corporate

Corporate operating charges included in 2017 consolidated EBIT increased to $32.1 million as compared to $30.1 million in 2016 due to an increase in acquisition related expenses, mainly from increased amortization of intangible assets on recent acquisitions.

Corporate operating charges included in 2016 consolidated EBIT increased to $30.1 million as compared to $23.4 million in 2015 due to an increase in professional fees, acquisition related expenses, and head count related expenses.

The “Reconciliation to Consolidated Totals (Corporate)” in Note 13 to the Consolidated Financial Statements included herein represents Corporate office operating charges.

Interest Expense, Net

Interest expense was $4.6 million in 2017, $1.3 million in 2016 and $0.8 million in 2015. The increase in interest expense in 2017 as compared to 2016 was due to higher average outstanding borrowings ($211.3 million compared to $89.2 million) and higher average interest rates (2.1% vs. 1.6%) as a result of the additional borrowings to fund the Company’s 2017 acquisitions (Mayday, Morgan Schaffer, NRG and Vanguard Instruments).The increase in interest expense in 2016 as compared to 2015 was due to higher average interest rates (1.6% vs. 1.3%) and higher average outstanding borrowings ($89.2 million vs. $68.5 million) as a result of the additional borrowings to fund the Company’s 2016 acquisitions (Westland, Plastique and Fremont).

Income Tax Expense

The effective tax rates from continuing operations for 2017, 2016 and 2015 were 33.0%, 32.9% and 32.2%, respectively. The increase in the 2017 effective tax rate as compared to 2016 as well as the 2016 effective tax rate as compared to 2015 was primarily due to normal tax fluctuations within the ordinary course of business.

The Company’s foreign subsidiaries had accumulated unremitted earnings of $48.9 million and cash of $28.4 million at September 30, 2017. No deferred taxes have been provided on these accumulated unremitted earnings because these funds are not needed to meet the liquidity requirements of the Company’s U.S. operations and it is the Company’s intention to indefinitely reinvest these earnings in continuing international operations. In the event these foreign entities’ earnings were distributed, it is estimated that U.S. taxes, net of available foreign tax credits, of approximately $6.9 million would be due, which would correspondingly reduce the Company’s net earnings. No significant portion of the Company’s foreign subsidiaries’ earnings was taxed at a rate significantly less than the U.S. statutory tax rate.

Capital Resources and Liquidity

The Company’s overall financial position and liquidity are strong. Working capital (current assets less current liabilities) increased to $197.8 million at September 30, 2017, from $165.4 million at September 30, 2016, mainly due to higher accounts receivable and inventory balances. The $39.1 million increase in accounts receivable at September 30, 2017 was mainly due to a $17.5 million increase within the Filtration segment mainly due to the acquisition of Mayday and a $16.2 million increase within the USG segment mainly due to the acquisitions of NRG, Morgan Schaffer and Vanguard Instruments. The $19.0 million increase in inventory at September 30, 2017 was mainly due to a $10.9 million increase in the USG segment due to the NRG, Morgan Schaffer and Vanguard Instruments acquisitions and a $7.5 million increase in the Filtration segment due to the Mayday acquisition.

Net cash provided by operating activities from continuing operations was $67.3 million, $73.9 million and $65.0 million in 2017, 2016 and 2015, respectively; the changes were mainly due to changes in working capital.

Net cash used in investing activities from continuing operations was $233.9 million, $104.6 million and $39.5 million in 2017, 2016, and 2015, respectively. The increase in net cash used in investing activities in 2017 as compared to 2016 was due to the Company’s 2017 acquisitions of Mayday, NRG, Morgan Schaffer and Vanguard Instruments. Capital expenditures for continuing operations were $29.7 million, $13.8 million and $12.4 million in 2017, 2016 and 2015, respectively. The increase in capital expenditures in 2017 as compared to 2016 was mainly due to an increase in machinery and equipment at VACCO, a facility expansion at Plastique and the capital expenditures specific to the Company’s recently acquired entities. There were no commitments outstanding that were considered material for capital expenditures at September 30, 2017. In addition, the Company incurred expenditures for capitalized software of $9.0 million, $8.7 million and $6.9 million 2017, 2016 and 2015, respectively. The increase in 2016 as compared to 2015 was mainly due to higher capitalized software expenditures within the USG and Test segments.

The Company made required pension contributions of $2.7 million, $0 and $0.7 million in 2017, 2016 and 2015, respectively.

Net cash provided by financing activities was $156.8 million and $46.2 million in 2017 and 2016, respectively, compared to net cash used by financing activities of $16.6 million in 2015. The increase in 2017 compared to 2016 and 2015 was mainly due to an increase in borrowings related to the Company’s recent acquisitions.

Acquisitions

2017

On August 30, 2017, the Company acquired the assets of Vanguard Instruments Company (Vanguard Instruments), a test equipment provider serving the global electric utility market for a purchase price of $36.0 million in cash. Vanguard Instruments designs, develops and manufactures test equipment which enhances the ability of electric utilities to accurately measure the health of critical power transformers and circuit breakers. The business, located in Ontario, California, operates from its current location as a product line of Doble within the Company’s USG segment and has annualized sales of approximately $14 million. Based on the preliminary purchase price allocation, the Company recorded approximately $1.8 million of accounts receivable, $2.1 million of inventory, $0.3 million of property, plant and equipment, $0.2 million of accounts payable and accrued expenses, $10.7 million of goodwill, $3.2 million of trade names and $18.0 million of amortizable intangible assets consisting of customer relationships with a weighted average life of 15 years.

On May 25, 2017, the Company acquired the assets of Morgan Schaffer Inc. (Morgan Schaffer), a global utilities provider located in Montreal, Quebec, Canada, for a purchase price of $48.8 million in cash. Morgan Schaffer has annualized sales of approximately $25 million. It designs, develops, manufactures and markets an integrated offering of dissolved gas analysis, oil testing, and data management solutions which enhance the ability of electric utilities to accurately monitor the health of critical power transformers. Since the date of acquisition, the operating results for Morgan Schaffer have been included in the Company’s USG segment. Based on the preliminary purchase price allocation, the Company recorded approximately $2.5 million of accounts receivable, $5.2 million of inventory, $1.7 million of property, plant and equipment, $0.4 million of other assets, $4.9 million of accounts payable and accrued expenses, $4.8 million of goodwill, $35.6 million of trade names and $3.6 million of amortizable intangible assets consisting of customer relationships and developed technology with a weighted average life of approximately 10 years.

On May 8, 2017, the Company acquired NRG Systems, Inc. (NRG), located in Hinesburg, Vermont, for a purchase price of $38.6 million in cash. NRG is the global market leader in the design and manufacture of decision support tools for the renewable energy industry, primarily wind. NRG has annualized sales of approximately $45 million. Since the date of acquisition, the operating results for NRG have been included in the Company’s USG segment. Based on the preliminary purchase price allocation, the Company recorded approximately $1.5 million of cash, $4.1 million of accounts receivable, $5.1 million of inventory, $1.0 million of other assets, $9.4 million of property, plant and equipment (including a capital lease), $4.1 million of accounts payable and accrued expenses, $9.7 million of lease liability, $8.0 million of goodwill, $8.1 million of trade names and $17.2 million of amortizable intangible assets consisting of customer relationships with a weighted average life of approximately 14 years.

On November 7, 2016, the Company acquired aerospace suppliers Mayday Manufacturing Co. (Mayday) and its affiliate Hi-Tech Metals, Inc. (Hi-Tech), which share a state-of-the-art, expandable 130,000 square foot facility in Denton, Texas, for a purchase price of approximately $75 million in cash. Mayday is a leading manufacturer of mission-critical bushings, pins, sleeves and precision-tolerance machined components for landing gear, rotor heads, engine mounts, flight controls and actuation systems for the aerospace and defense industry. Hi-Tech is a full-service metal processor offering aerospace OEM’s and Tier 1 suppliers a large portfolio of processing services including anodizing, cadmium and zinc-nickel plating, organic coatings, non-destructive testing and heat treatment. Mayday and Hi-Tech together have annual sales of approximately $40 million. Since the date of acquisition, the consolidated operating results for Mayday and Hi-Tech have been included in the Company’s Filtration segment. Based on the purchase price allocation, the Company recorded approximately $7.3 million of accounts receivable, $10.6 million of inventory, $16.6 million of property, plant and equipment (including a capital lease), $10.1 million of lease liability, $15.6 million of deferred tax liabilities, $30.2 million of goodwill, $4.8 million of trade names and $32.8 million of amortizable identifiable intangible assets consisting primarily of customer relationships with a weighted-average life of approximately 20 years.

2016

On September 2, 2016, the Company acquired the stock of Westland Technologies, Inc. (Westland), located in Modesto, California, for a purchase price of approximately $41 million in cash. Westland is a market leader in the design, development and manufacture of elastomeric-based signature reduction solutions which enhance U.S. Naval maritime platform survivability. Westland has annual sales of approximately $25 million. Since the date of acquisition, the operating results for Westland have been included within the Company’s Filtration segment. Based on the purchase price allocation, the Company recorded tangible assets, net, of $5.5 million, deferred tax liabilities of $9.5 million, goodwill of $17.9 million, and $28.3 million of identifiable intangible assets primarily consisting of customer relationships.

On January 29, 2016, the Company acquired Plastique, which is headquartered in Tunbridge Wells, England and has manufacturing locations in Nottingham, England and Poznan, Poland, for a purchase price of approximately $31.6 million (of which $2.7 million is due over the next two years). Plastique is a market leader in the development and manufacture of highly-technical thermoformed plastic and precision molded pulp fiber packaging primarily serving pharmaceutical, personal care, and various specialty end markets. Since the date of acquisition, the operating results for Plastique have been included within the Company’s Technical Packaging segment. Plastique has annual sales of approximately $35 million. Based on the purchase price allocation, the Company recorded tangible assets, net, of $9.6 million, goodwill of $10.2 million, and $11.9 million of identifiable intangible assets primarily consisting of customer relationships.

On October 16, 2015, the Company acquired the stock of Fremont Plastics, Inc. (Fremont) for a purchase price of $10.5 million in cash. The Company also purchased for $2 million Fremont’s real property located in Fremont, Indiana. Fremont was a developer, manufacturer, promoter and seller of high quality sterile-ready and non-sterile thin gauge thermoformed medical plastic packaging products. Immediately following the closing of the transaction, Fremont was merged into TEQ, and therefore since the date of acquisition the operating results for Fremont have been included as part of TEQ.

2015

On January 28, 2015, the Company acquired the assets of Enoserv, LLC (Enoserv), headquartered in Tulsa, Oklahoma, for $20.5 million in cash. Enoserv provides utility customers with high quality, user-friendly multi-platform software and has annual revenues of approximately $8 million. Since the date of acquisition the operating results for Enoserv have been included as part of Doble within the Company’s USG segment. Based on the purchase price allocation, the Company recorded approximately $10.0 million of goodwill and $9.0 million of amortizable identifiable intangible assets consisting primarily of customer relationships and developed technology.

All of the Company’s acquisitions have been accounted for using the purchase method of accounting, and accordingly, the respective purchase prices were allocated to the assets (including intangible assets) acquired and liabilities assumed based on estimated fair values at the date of acquisition. The financial results from these acquisitions have been included in the Company’s financial statements from the date of acquisition.

Bank Credit Facility

The Company’s existing credit facility (“the Credit Facility”) matures December 21, 2020. The Credit Facility includes a $450 million revolving line of credit as well as provisions allowing for the increase of the credit facility commitment amount by an additional $250 million, if necessary, with the consent of the lenders. The bank syndication supporting the facility is comprised of a diverse group of nine banks led by JP Morgan Chase Bank, N.A., as Administrative Agent.

At September 30, 2017, the Company had approximately $166 million available to borrow under the Credit Facility, plus the $250 million increase option, in addition to $45.5 million cash on hand. The Company classified $20.0 million as the current portion of long-term debt as of September 30, 2017, as the Company intends to repay this amount within the next twelve months; however, the Company has no contractual obligation to repay such amount during the next twelve months.

The Credit Facility requires, as determined by certain financial ratios, a facility fee ranging from 12.5 to 27.5 basis points per annum on the unused portion. The terms of the facility provide that interest on borrowings may be calculated at a spread over the London Interbank Offered Rate (LIBOR) or based on the prime rate, at the Company’s election. The facility is secured by the unlimited guaranty of the Company’s material domestic subsidiaries and a 65% pledge of its material foreign subsidiaries’ share equity. The financial covenants of the Credit Facility include a leverage ratio and an interest coverage ratio. As of September 30, 2017, the Company was in compliance with all bank covenants.

Cash flow from operations and borrowings under the Credit Facility are expected to provide adequate resources to meet the Company’s capital requirements and operational needs for the foreseeable future.

Dividends

Since 2010 the Company has paid a regular quarterly cash dividend at an annual rate of $0.32 per share. The Company paid dividends of $8.3 million, $8.2 million and $8.4 million in 2017, 2016 and 2015, respectively.

Contractual Obligations

The following table shows the Company’s contractual obligations as of September 30, 2017:

As of September 30, 2017, the Company had $0.1 million of liabilities for uncertain tax positions. The unrecognized tax benefits have been excluded from the table above due to uncertainty as to the amounts and timing of settlement with taxing authorities.

The Company had no off-balance-sheet arrangements outstanding at September 30, 2017.

Share Repurchases

In August 2012, the Company’s Board of Directors authorized a common stock repurchase program under which the Company may repurchase shares of its stock from time to time in its discretion, in the open market or otherwise, up to a maximum total repurchase amount of $100 million (or such lesser amount as may be permitted under the Company’s bank credit agreements). This program has been twice extended by the Company’s Board of Directors and is currently scheduled to expire September 30, 2019. There were no share repurchases in 2017. The Company repurchased approximately 120,000 shares for $4.3 million in 2016 and 517,000 shares for $18.2 million in 2015. At September 30, 2017 approximately $50.4 million remained available for repurchases under the program.

Pension Funding Requirements

The minimum cash funding requirements related to the Company’s defined benefit pension plans are estimated to be approximately $2.8 million in 2018, $2.8 million in 2019, and $3.1 million in 2020.

Other

As a normal incident of the business in which the Company is engaged, various claims, charges and litigation are asserted or commenced from time to time against the Company. Additionally, the Company is currently involved in various stages of investigation and remediation relating to environmental matters. It is the opinion of Management that the aggregate costs involved in the resolution of these matters, and final judgments, if any, which might be rendered against the Company are adequately reserved for, are covered by insurance or are not likely to have a material adverse effect on the Company’s results from continuing operations, capital expenditures or competitive position.

Outlook

Management continues to see meaningful sales and Adjusted EBITDA growth across each of the Company’s business segments and anticipates growth rates in 2018 and beyond that exceed the Company’s defined peer group and the broader industrial market. The details of Management’s growth expectations for 2018 compared to 2017 are as follows:

On a quarterly basis, Management expects 2018 operating results to reflect a profile similar to 2017 and previous years, with revenues and EPS being more second-half weighted. As with past years, projected second half 2018 sales and EPS are expected to be significantly stronger than the first half. Management expects Q1 2018 EPS to be in the range of $0.28 to $0.33 per share. The timing of quarterly sales and earnings throughout the year, coupled with higher non-cash charges within the respective quarters impacts comparability in Q1.

Market Risk Analysis

Market Risk Exposure

Market risks relating to the Company’s operations result primarily from changes in interest rates and changes in foreign currency exchange rates. The Company is exposed to market risk related to changes in interest rates and selectively uses derivative financial instruments, including forward contracts and swaps, to manage these risks. During 2016, the Company entered into several forward contracts to purchase pounds sterling (GBP) to hedge two deferred payments due in connection with the acquisition of Plastique. In 2017, the Company’s Canadian subsidiary Morgan Schaffer entered into foreign exchange contracts to manage foreign currency risk, as a portion of their revenue is denominated in U.S. dollars. All derivative instruments are reported on the balance sheet at fair value. For derivative instruments designated as cash flow hedges, the gain or loss on the derivative is deferred in accumulated other comprehensive income until recognized in earnings with the underlying hedged item.

The Company has determined that the market risk related to interest rates with respect to its variable debt is not material. The Company estimates that if market interest rates averaged one percentage point higher, the effect would have been less than 4% of net earnings for the year ended September 30, 2017.

The following is a summary of the notional transaction amounts and fair values for the Company’s outstanding derivative financial instruments as of September 30, 2017.

The Company is also subject to foreign currency exchange rate risk inherent in its sales commitments, anticipated sales, anticipated purchases and assets and liabilities denominated in currencies other than the U.S. dollar. The foreign currencies most significant to the Company’s operations are the Canadian Dollar and the Euro. The Company occasionally hedges certain foreign currency commitments by purchasing foreign currency forward contracts. The Company does not have material foreign currency market risk; net foreign currency transaction gain/loss was less than 2% of net earnings for 2017, 2016 and 2015.

Critical Accounting Policies

The preparation of financial statements in conformity with U.S. generally accepted accounting principles (GAAP) requires Management to make estimates and assumptions in certain circumstances that affect amounts reported in the accompanying Consolidated Financial Statements. In preparing these financial statements, Management has made its best estimates and judgments of certain amounts included in the Consolidated Financial Statements, giving due consideration to materiality. The Company does not believe there is a great likelihood that materially different amounts would be reported under different conditions or using different assumptions related to the accounting policies described below. However, application of these accounting policies involves the exercise of judgment and use of assumptions as to future uncertainties and, as a result, actual results could differ from these estimates. The Company’s senior Management discusses the critical accounting policies described below with the Audit and Finance Committee of the Company’s Board of Directors on a periodic basis.

The following discussion of critical accounting policies is intended to bring to the attention of readers those accounting policies which Management believes are critical to the Consolidated Financial Statements and other financial disclosure. It is not intended to be a comprehensive list of all significant accounting policies that are more fully described in Note 1 to the Consolidated Financial Statements included herein.

Revenue Recognition

Filtration Segment: Within the Filtration segment, approximately 86% of revenues (approximately 36% of consolidated revenues) are recognized when products are delivered (when title and risk of ownership transfers) or when services are performed for unaffiliated customers.

Approximately 14% of the segment’s revenues (approximately 6% of consolidated revenues) are recorded under the percentage-of-completion method because the Company manufactures complex products for aerospace and military customers under production contracts. The majority of these contracts are cost-reimbursable contracts which provide for the payment of allowable costs incurred during the performance of the contract plus an incentive fee. The remainder of the contracts are fixed-price contracts. The percentage-of-completion method of accounting involves the use of various estimating techniques to project costs at completion. These estimates involve various assumptions and projections relative to the outcome of future events over a period of several years, including future labor productivity and availability, the nature and complexity of the work to be performed, availability of materials, the impact of delayed performance, the timing of product deliveries, and estimates of incentive fees based on past experience and anticipated performance. These estimates are based on Management’s judgment and the Company’s substantial experience in developing these types of estimates. Changes in underlying assumptions/estimates may adversely affect financial performance if they increase estimated project costs at completion, or positively affect financial performance if they decrease estimated project costs at completion. Due to the nature of these contracts and the operating unit’s cost estimating process, the Company believes that these estimates generally should not be subject to significant variation in the future. There have been no material changes to these estimates for the financial statement periods presented. The Company regularly reviews its estimates to assess revisions in contract values and estimated costs at completion.

Test Segment: Within the Test segment, approximately 30% of revenues (approximately 7% of consolidated revenues) are recognized when products are delivered (when title and risk of ownership transfers) or when services are performed for unaffiliated customers.

Approximately 70% of the segment’s revenues (approximately 16% of consolidated revenues) are recorded under the percentage-of-completion method due to the complex nature of the enclosures that are designed and produced under these contracts. As discussed above, this method of accounting involves the use of various estimating techniques to project costs at completion, which are based on Management’s judgment and the Company’s substantial experience in developing these types of estimates. Changes in underlying assumptions/estimates may adversely or positively affect financial performance in a period. Due to the nature of these contracts and the operating unit’s cost estimating process, the Company believes that these estimates generally should not be subject to significant variation in the future. There have been no material changes to these estimates for the financial statement periods presented. The Company regularly reviews its contract estimates to assess revisions in contract values and estimated costs at completion.

USG Segment: Within the USG segment, approximately 78% of revenues (approximately 18% of consolidated revenues) are recognized when products are delivered (when title and risk of ownership transfers) or when services are performed for unaffiliated customers. Approximately 22% of the segment’s revenues (approximately 5% of consolidated revenues) are recognized on a straight-line basis over the lease term.

Technical Packaging Segment: Within the Technical Packaging segment, 100% of revenues (approximately 12% of consolidated revenues) represent products and services sold and are recognized when products are delivered (when title and risk of ownership transfers), or when services are performed for unaffiliated customers.

Income Taxes

The Company operates in numerous taxing jurisdictions and is subject to examination by various U.S. Federal, state and foreign jurisdictions for various tax periods. The Company’s income tax positions are based on research and interpretations of the income tax laws and rulings in each of the jurisdictions in which the Company does business. Due to the subjectivity of interpretations of laws and rulings in each jurisdiction, the differences and interplay in tax laws between those jurisdictions, as well as the inherent uncertainty in estimating the final resolution of complex tax audit matters, Management’s estimates of income tax liabilities may differ from actual payments or assessments.

Management regularly assesses the Company’s position with regard to tax exposures and records liabilities for these uncertain tax positions and related interest and penalties, if any, according to the principles of Financial Accounting Standards Board (FASB) ASC Topic 740, Income Taxes (ASC 740). The Company has recorded an accrual that reflects the recognition and measurement process for the financial statement recognition and measurement of a tax position taken or expected to be taken on a tax return based upon ASC 740. Additional future income tax expense or benefit may be recognized once the positions are effectively settled. It is the Company’s policy to follow FASB ASC 740-10-45-20 and record the tax effects of changes in the opening balance of unrecognized tax benefits in net earnings from continuing operations.

At the end of each interim reporting period, Management estimates the effective tax rate expected to apply to the full fiscal year. The estimated effective tax rate contemplates the expected jurisdiction where income is earned, as well as tax planning strategies. Current and projected growth in income in higher tax jurisdictions may result in an increasing effective tax rate over time. If the actual results differ from Management’s estimates, Management may have to adjust the effective tax rate in the interim period if such determination is made.

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. Deferred tax assets may be reduced by a valuation allowance if it is more likely than not that some portion of the deferred tax assets will not be realized. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. The Company regularly reviews its deferred tax assets for recoverability and establishes a valuation allowance when Management believes it is more likely than not such assets will not be recovered, taking into consideration historical operating results, expectations of future earnings, tax planning strategies, and the expected timing of the reversals of existing temporary differences.

Goodwill And Other Long-Lived Assets

Management annually reviews goodwill and other long-lived assets with indefinite useful lives for impairment or whenever events or changes in circumstances indicate the carrying amount may not be recoverable. If the Company determines that the carrying value of the long-lived asset may not be recoverable, a permanent impairment charge is recorded for the amount by which the carrying value of the long-lived asset exceeds its fair value. Fair value is measured based on a discounted cash flow method using a discount rate determined by Management to be commensurate with the risk inherent in the Company’s current business model. The estimates of cash flows and discount rate are subject to change due to the economic environment, including such factors as interest rates, expected market returns and volatility of markets served. Management believes that the estimates of future cash flows and fair value are reasonable; however, changes in estimates could result in impairment charges. At September 30, 2017, the Company has determined that no reporting units are at risk of goodwill impairment as the fair value of each reporting unit substantially exceeded its carrying value.

Intangible assets with estimable useful lives are amortized over their respective estimated useful lives to their estimated residual values, and are reviewed for impairment whenever events or changes in business circumstances indicate the carrying value of the assets may not be recoverable.

Pension Plans and Other Postretirement Benefit Plans

The measurement of liabilities related to pension plans and other postretirement benefit plans is based on Management’s assumptions related to future events including interest rates, return on pension plan assets, and health care cost trend rates. Actual pension plan asset performance will either decrease or increase unamortized pension losses/gains that will affect net earnings in future years. Depending upon the performance of the equity and bond markets in 2018, the Company could be required to record a charge to other comprehensive income/loss. In addition, if the discount rate were decreased by 25 basis points from 3.65% to 3.40%, the projected benefit obligation for the defined benefit plan would increase by approximately $2.8 million and result in an additional after-tax charge to other comprehensive income/loss of approximately $1.8 million. The discount rate used in measuring the Company’s pension and postretirement welfare obligations was developed by matching yields of actual high-quality corporate bonds to expected future pension plan cash flows (benefit payments). Over 400 Aa-rated, non-callable bonds with a wide range of maturities were used in the analysis. After using the bond yields to determine the present value of the plan cash flows, a single representative rate that resulted in the same present value was developed.

Other Matters

Contingencies

As a normal incident of the businesses in which the Company is engaged, various claims, charges and litigation are asserted or commenced from time to time against the Company. Additionally, the Company is currently involved in various stages of investigation and remediation relating to environmental matters. It is the opinion of Management that the aggregate costs involved in the resolution of these matters, and final judgments, if any, which might be rendered against the Company are adequately accrued, are covered by insurance or are not likely to have a material adverse effect on the Company’s results from continuing operations, capital expenditures, or competitive position.

Quantitative and Qualitative Disclosures About Market Risk

Market risks relating to the Company’s operations result primarily from changes in interest rates and changes in foreign currency exchange rates. The Company is exposed to market risk related to changes in interest rates and selectively uses derivative financial instruments, including forward contracts and swaps, to manage these risks. During 2016 the Company entered into several forward contracts to purchase pounds sterling (GBP) to hedge two deferred payments (one due in January 2018 and one due in January 2019) due in connection with the acquisition of Plastique. In addition, the Company’s Canadian subsidiary Morgan Schaffer has entered into foreign exchange contracts to manage foreign currency risk as a portion of their revenue is denominated in U.S. dollars. All derivative instruments are reported on the balance sheet at fair value. For derivative instruments designated as cash flow hedges, the gain or loss on the derivative is deferred in accumulated other comprehensive income until recognized in earnings with the underlying hedged item. See further discussion regarding the Company’s market risks in “Market Risk Analysis,” above.

Controls and Procedures

For a description of the Company’s evaluation of its disclosure controls and procedures, see Item 9A, “Controls and Procedures.”

New Accounting Pronouncements

In January 2017, the FASB issued Accounting Standards Update (ASU) No. 2017-04, Simplifying the Test for Goodwill Impairment (ASU 2017-04), which eliminates Step 2 from the goodwill impairment test. Under the amendments in this update, an entity should recognize an impairment charge for the amount by which the carrying amount exceeds the reporting unit’s fair value; however, the loss recognized should not exceed the total amount of goodwill allocated to that reporting unit. The new standard is effective for fiscal years beginning after December 15, 2019. Early adoption is permitted for interim or annual goodwill impairment tests performed on testing dates after January 1, 2017. The Company adopted this standard in the fourth quarter of 2017 with its annual goodwill impairment tests. The adoption of ASU 2017-04 did not have an impact on the Company’s Consolidated Financial Statements.

In March 2016, the FASB issued ASU No. 2016-09, Improvements to Employee Share-Based Payment Accounting, which simplified the income tax consequences, accounting for forfeitures and classification on the Statements of Consolidated Cash Flows. The Company adopted this standard in the current year resulting in the income tax expense in the third quarter and fiscal year 2017 being favorably impacted by additional tax benefits on share-based compensation that vested during the third quarter of 2017 decreasing the effective tax rate by 5.1% and 1.1%, respectively.

In February 2016, the FASB issued ASU No. 2016-062, Leases (Topic 842), which, among other things, requires an entity to recognize lease assets and lease liabilities on the balance sheet and disclose key information about leasing arrangements. This new standard will increase an entity’s reported assets and liabilities. The new standard is effective for fiscal years beginning after December 15, 2018 and mandates a modified retrospective transition period for all entities. The Company is currently assessing the impact of this new standard on its consolidated financial statements and related disclosures.

In November 2015, the FASB issued ASU No. 2015-17, Balance Sheet Classification of Deferred Taxes, which requires entities to present deferred tax assets and deferred tax liabilities as noncurrent in a classified balance sheet. This new standard is effective for annual periods beginning after December 15, 2016. The Company adopted this standard during the fourth quarter of 2016 and applied it on a prospective basis.

In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers, which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. This guidance has been further clarified and amended. The new standard will be effective for annual reporting periods beginning after December 15, 2017, and interim periods within those annual periods. The standard permits the use of either the retrospective or cumulative effect transition method. The Company is currently in the process of calculating the effect that ASU 2014-09 will have on its consolidated financial statements and related disclosures. The Company has selected the Cumulative Effect method of transition to the new standard.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

See “Market Risk Analysis” and “Other Matters – Quantitative And Qualitative Disclosures About Market Risk” in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” which are incorporated into this Item by reference.

Item 8. Financial Statements and Supplementary Data

The information required by this Item is incorporated by reference to the Consolidated Financial Statements of the Company, the Notes thereto, and the related “Report of Independent Registered Public Accounting Firm” of KPMG LLP, as set forth in the Financial Information section beginning on page F-1 of this Annual Report; an Index is provided on page F-1.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not Applicable.

Item 9A. Controls and Procedures

For 2017 the Company carried out an evaluation of the effectiveness of the design and operation of the Company’s disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d–15(e) under the Securities Exchange Act of 1934, as amended (the Exchange Act). The evaluation was conducted under the supervision and with the participation of the Company’s Management, including the Company’s Chief Executive Officer and Chief Financial Officer, using the Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Disclosure controls and procedures are controls and procedures that are designed to ensure that information required to be disclosed in Company reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms. Based upon that evaluation, the Company’s Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of September 30, 2017.

There were no changes in the Company’s internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) during the fiscal quarter ended September 30, 2017 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

For the remainder of the information required by this item, see “Management’s Report on Internal Control over Financial Reporting” and the related “Report of Independent Registered Public Accounting Firm” of KPMG LLP, in the Financial Information section beginning on page F-1 of this Annual Report, which are incorporated into this Item by reference.

Item 9B. Other Information

None.

PART III

Item 10. Directors, Executive Officers and Corporate Governance

Information regarding nominees and directors, the Company’s Code of Ethics, its Audit and Finance Committee, and compliance with Section 16(a) of the Securities Exchange Act of 1934 is hereby incorporated by reference to the sections captioned “Proposal 1: Election of Directors,” “Board of Directors – Governance Policies and Management Oversight,” “Committees” and “Securities Ownership – Section 16(a) Beneficial Ownership Reporting Compliance” in the 2017 Proxy Statement.

Information regarding the Company’s executive officers is set forth in Item 1, “Business – Executive Officers of the Registrant,” above.

Item 11. Executive Compensation

Information regarding the Company’s compensation committee and director and executive officer compensation is hereby incorporated by reference to the sections captioned “Committees – Compensation Committee Interlocks and Insider Participation,” “Director Compensation” and “Executive Compensation Information” in the 2017 Proxy Statement.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Information regarding the beneficial ownership of shares of the Company’s common stock by nominees and directors, by executive officers, by directors and executive officers as a group and by any known five percent stockholders is hereby incorporated by reference to the section captioned “Securities Ownership” in the 2017 Proxy Statement.

Information regarding shares of the Company’s common stock issued or issuable under the Company’s equity compensation plans is hereby incorporated by reference to the section captioned “Proposal 3: Approval of 2018 Omnibus Incentive Plan – Other Equity Compensation Plan Information” in the 2017 Proxy Statement.

Item 13. Certain Relationships and Related Transactions and Director Independence

Information regarding transactions with related parties and the independence of the Company’s directors, nominees for directors and members of the committees of the board of directors is hereby incorporated by reference to the sections captioned “Board of Directors” and “Committees” in the 2017 Proxy Statement.

Item 14. Principal Accounting Fees and Services

Information regarding the Company’s independent registered public accounting firm, its fees and services, and the Company’s Audit and Finance Committee’s pre-approval policies and procedures regarding such fees and services, is hereby incorporated by reference to the section captioned “Audit-Related Matters” in the 2017 Proxy Statement.

PART IV

Item 15. Exhibits, Financial Statement Schedules

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant in the capacities and on the dates indicated.

[This page is intentionally left blank]

FINANCIAL INFORMATION

INDEX

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Shareholders
ESCO Technologies Inc.:

We have audited the accompanying consolidated balance sheets of ESCO Technologies Inc. and subsidiaries (the Company) as of September 30, 2017 and 2016, and the related consolidated statements of operations, comprehensive income (loss), shareholders’ equity, and cash flows for each of the years in the three-year period ended September 30, 2017. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of September 30, 2017 and 2016, and the results of its operations and its cash flows for each of the years in the three-year period ended September 30, 2017, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), ESCO Technologies Inc.’s internal control over financial reporting as of September 30, 2017, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated November 29, 2017 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

/s/ KPMG LLP

St. Louis, Missouri
November 29, 2017

CONSOLIDATED STATEMENTS OF OPERATIONS

See accompanying Notes to Consolidated Financial Statements.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

See accompanying Notes to Consolidated Financial Statements.

CONSOLIDATED BALANCE SHEETS

See accompanying Notes to Consolidated Financial Statements.

CONSOLIDATED BALANCE SHEETS

See accompanying Notes to Consolidated Financial Statements.

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY